Related
Why my thread got closed I wana know how to make x10 vibrate and ring at sametime when receiving a call.
because unless there is something lost in the translation, it is VERY obvious that the phone can vibrate and ring at same time. its a basic function of the phone. is that not what you meant?
the_ahmadzais said:
Why my thread got closed I wana know how to make x10 vibrate and ring at sametime when receiving a call.
Click to expand...
Click to collapse
easy go to settings>>sound & display>>phone vibrate !!!
I did that and put the phone on loud volume when I received call only ringtone no vibrate
..... this is even worse than all those FroYo and MT queations..
Check the phone manuals dood, or lurk on the phone's setting..
Sent from my X10i using XDA App
...or, when it rings, shake it violently to simulate the vibration.
k1sr said:
...or, when it rings, shake it violently to simulate the vibration.
Click to expand...
Click to collapse
ahahahahha
nice nice
the_ahmadzais said:
I did that and put the phone on loud volume when I received call only ringtone no vibrate
Click to expand...
Click to collapse
Honestly I don't know why people are assuming you don't know what you're doing, I think it's safe to say you know how the settings on your phone work, after all you are posting on XDA so one would think you're tech savvy enough to know how to enable vibrate and ring...despite the large number of morons on here nowadays.
What I'm getting at is I'm experiencing a similar problem myself. Only my phone no longer vibrates when I receive messages. It will vibrate and ring for incoming calls but only ring and no longer vibrate for sms. I never changed anything, it just stopped working properly about 2 weeks ago and I was hoping the problem would solve itself, sadly it hasn't yet. I've double checked every setting, uninstalled and reinstalled different apps and have emailed Handcent about the issue, no solution so far.
Also, when I go to the notification settings in Handcent and "test notification" it never vibrates now, regardless of the vibration pattern I select.
Any real help other than unfunny childish smartass comments would be appreciated, for both of us I think.
rvictorg said:
Honestly I don't know why people are assuming you don't know what you're doing, I think it's safe to say you know how the settings on your phone work, after all you are posting on XDA so one would think you're tech savvy enough to know how to enable vibrate and ring...despite the large number of morons on here nowadays.
What I'm getting at is I'm experiencing a similar problem myself. Only my phone no longer vibrates when I receive messages. It will vibrate and ring for incoming calls but only ring and no longer vibrate for sms. I never changed anything, it just stopped working properly about 2 weeks ago and I was hoping the problem would solve itself, sadly it hasn't yet. I've double checked every setting, uninstalled and reinstalled different apps and have emailed Handcent about the issue, no solution so far.
Also, when I go to the notification settings in Handcent and "test notification" it never vibrates now, regardless of the vibration pattern I select.
Any real help other than unfunny childish smartass comments would be appreciated, for both of us I think.
Click to expand...
Click to collapse
I dont think they are childish comments, but the comments are assuming a lack of technical ability
What troubleshooting have you done? What (apart from uninstalling apps and changing settings) have you done at all? Have you thought that your phone may be broken?
Chances are that if it is failing at vibrate, then no amount of software tweaks or 3rd party apps can fix a hardware fault. TEST IT using the service menu.
(Lock screen - Menu, Back, Back, Menu, Back, Menu, Menu, Back) Service tests => Vibrator. If your phone does not vibrate, then you have a problem. If it does vibrate then go back and check all your settings again - factory restore if required!
the_ahmadzais said:
Why my thread got closed I wana know how to make x10 vibrate and ring at sametime when receiving a call.
Click to expand...
Click to collapse
How can we assume that the user has any technical skill when this is what was written. If you have an issue, please give a decent outline of what it is (like RVICTORG has done) and the other users can probably see where you are going wrong. "Its not working" does not help anyone.
rvictorg said:
Honestly I don't know why people are assuming you don't know what you're doing, I think it's safe to say you know how the settings on your phone work, after all you are posting on XDA so one would think you're tech savvy enough to know how to enable vibrate and ring...despite the large number of morons on here nowadays.
Click to expand...
Click to collapse
Dude, have a look at some of the threads he/she has started, it seems they start threads just for the sake of it, and I've come across the same behaviour on other forums from them.
I got it figured out people are nice at Android forums to answer my question and not laugh at . And I do search before I post
the_ahmadzais said:
I got it figured out people are nice at Android forums to answer my question and not laugh at . And I do search before I post
Click to expand...
Click to collapse
People are nice here too, but we get a lot of trolls, questions asked 1000 times and people who don't search before posting... so yeah, we're a little short tempered as well...
the_ahmadzais said:
I got it figured out people are nice at Android forums to answer my question and not laugh at . And I do search before I post
Click to expand...
Click to collapse
look mate, if thats all it takes to get you all p'd off, well whatever. If you look up at the top of this thread, i did ask you what you meant....no response though. sometimes you just have to ask it the right way.
mrtim123 said:
I dont think they are childish comments, but the comments are assuming a lack of technical ability
What troubleshooting have you done? What (apart from uninstalling apps and changing settings) have you done at all? Have you thought that your phone may be broken?
Chances are that if it is failing at vibrate, then no amount of software tweaks or 3rd party apps can fix a hardware fault. TEST IT using the service menu.
(Lock screen - Menu, Back, Back, Menu, Back, Menu, Menu, Back) Service tests => Vibrator. If your phone does not vibrate, then you have a problem. If it does vibrate then go back and check all your settings again - factory restore if required!
How can we assume that the user has any technical skill when this is what was written. If you have an issue, please give a decent outline of what it is (like RVICTORG has done) and the other users can probably see where you are going wrong. "Its not working" does not help anyone.
Click to expand...
Click to collapse
XperiaX10iUser said:
Dude, have a look at some of the threads he/she has started, it seems they start threads just for the sake of it, and I've come across the same behaviour on other forums from them.
Click to expand...
Click to collapse
No I haven't looked at any of his other threads, and believe me I know there's a lot of idiots on this forum nowadays, but I guess benefit of the doubt before harsh words :S Doesn't matter now, he solved his problem but I haven't resolved mine.
Like I said in my earlier post, my phone will vibrate for incoming calls, just not messages any more. The service test was one of the first things I did and I can confirm my phone will still vibrate. I have absolutely no idea why it's not for messages and I feel like I've exhausted all possible solutions barring re-flashing firmware. I haven't received a response from Handsent yet, based on that and no others commenting here I assume this is just an annoying isolated incident.
Will update if I find a solution. Thanks for your suggestions guys despite me having already trying them it's still appreciated and if you think of anything else let me know, peace.
the_ahmadzais said:
I got it figured out people are nice at Android forums to answer my question and not laugh at . And I do search before I post
Click to expand...
Click to collapse
Ummm..... So, you figured out the solution to your problem, and all you say is "it's good now'', and don't share HOW you fixed it? Come on, dude!
You started this thread because you had a problem. Now that you found the solution, it is only logical that you post the solution as well. This way, other readers that have the same problem can get help too! I'm sure RVICTORG would like to know what you had to do!
@rvictorg -- have you tried the standard messaging app?? does it work on that?
im_iceman said:
@rvictorg -- have you tried the standard messaging app?? does it work on that?
Click to expand...
Click to collapse
Yeah I tried turning on notifications for the standard app and no vibrating, just audio and visual alerts. :S Thanks though. I'm thinking I may just have to uninstall/re-install Handcent to see if that helps.
rvictorg said:
Yeah I tried turning on notifications for the standard app and no vibrating, just audio and visual alerts. :S Thanks though. I'm thinking I may just have to uninstall/re-install Handcent to see if that helps.
Click to expand...
Click to collapse
so does your phone vibrate at all now? what were the results of the vibrate test in the service menu?
hello
i'm looking for an app or mod to make the phone vibrate when the call is connected.tried call vibrate,but it does not work with nexus 4.
thank you
54 views and no reply?
cturbos said:
54 views and no reply?
Click to expand...
Click to collapse
why would you want your phone to vibrate when a call is connected?.. woudnt that feel strange in your hand....
cturbos said:
54 views and no reply?
Click to expand...
Click to collapse
Because people want to see what "issue" you are talking about.
cturbos said:
hello
i'm looking for an app or mod to make the phone vibrate when the call is connected.tried call vibrate,but it does not work with nexus 4.
thank you
Click to expand...
Click to collapse
Don't no about a app but i think cm10.1 has that option , u MAY be able to extract phone app and get it to work on stock ROM .
I guess it will feel strange ! pretty awkward ! although extract the phone.apk from cm10.1 ! though !
Changing system apks on stock will affect your ability to accept and install new otas and will further cause problems doyen the road. Flash the rom. Stock rom is overrated and I don't know why people want to stay on it and they want the features of a custom rom.
Sent from my Nexus 4 using xda premium
My only issues with my Nexus 4 are...
1. No macro on camera.
2. No stabilization on camera.
3. There is a delay when starting a phone call where the other end can not hear you when you strt talking, using either T-mobile, Talkatone, Groove IP or Vonage.
the call vibrate is handy,better than having your phone glued to your ear.
Did you check the dialer settings? Open the dialer, Menu button > Settings and check Vibrate on Answer. Unless that's not available on stock (I'm using CM10.1)
And yes, this is actually very useful. Saves me the trouble of lifting the phone up to my ear only to hear a voicemail box.
rr5678 said:
Did you check the dialer settings? Open the dialer, Menu button > Settings and check Vibrate on Answer. Unless that's not available on stock (I'm using CM10.1)
And yes, this is actually very useful. Saves me the trouble of lifting the phone up to my ear only to hear a voicemail box.
Click to expand...
Click to collapse
It's not available on stock.
People still use Voicemail box? Just tie it to Google Voice's Voicemail. It transcribes your voicemail as well as allows a press play to hear. No more of that "press 1, press * to delete, etc"
On the 4.3 version, does this feature exist?
Hi everyone,
I've got an ATT I337 running the awesome Hyperdrive ROM version 17.1. Several of us --but clearly not all of us!-- over in that thread have noticed a problem with incoming calls. I think there's a setting somewhere that can fix it, so I'm opening it to a wider audience by posting it here, in hopes someone from this group will know what to tweak.
Here's the specific problem.
If my cell phone receives a call from a known contact "Bob" and Bob's contact info (being a U.S. phone number) is 317-555-1212, so far the phone seems to recognize the call as coming from Bob. However, it reports it as coming from +317-555-1212. When I go into the call log and try to return the call, it dials +317-555-1212, and the extra + causes the system to interpret it as an international call attempt, and the call fails. Cannot be completed as dialed, the message says. If it's an non-contact number, the + is still added. IT's not JUST for contacts.
Let's say Bob leaves a message. The voicemail indicator shows and it says offers to dial *86, the correct access code for voice mail for ATT as I understand it. However, tapping that actually dialed +11 then my ten digit phone number. Call fails.
At the dialpad, pressing and holding 1 to invoke voicemail has the same problem.
In Contacts, contacts are NOT listed with +s, and clicking the call button for them makes them dial OK without a + being prepended.
So, this looks like some international feature is being enabled that I'm not sure how to turn off. Does anyone have any idea how to turn this off? Sorta puts a crimp in the basic phone functionality. Seriously, who actually calls anyone these days? But it would be good to fix.
Please, if anyone has an idea of what might be at the root of this, I would appreciate your help!
Marc
I am confused. Does this only happen on the Hyper rom or all roms for you.
Not sure how anyone else does their contacts. But, I always enter numbers as 1-555-555-5555 even if local.
My voicemail number is set as +15555555555
I never had issues--
I remember some talk of that on Hyper awhile back. But, never paid attention--
Only happens on Hyperdrive. Or at least, I can say I never saw it on stock. Hyper is the only ROM I've actually gotten so far as to run while SIM card is inserted. :good:
My contacts are almost all US based and are just ten digits, no leading 1. I did try editing the contact to my work cell phone by adding a 1 to it, and calling my S4 phone. It still was registered as +317-555-1212 format and return call didn't work.
So, it's not really about the way the contacts are stored, more about how the phone interprets incoming calls.
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
rugmankc said:
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
Click to expand...
Click to collapse
Just edited above, adding 1 to the way contacts are stored doesn't change the behavior. I can certainly try a different dialer and see what happens, but it seems to be based on how incoming calls are interpreted. I'm guessing there's a build.prop item or somesuch that needs a-tweaking.
Marc
so you changed the contact number to 1-555-555-5555 with hyphens
i ran hyper for quite a bit awhile back never any issues. of course could be something new--
i am not thinking rom or a lot more would have issue--
I did some tests.
On the phone in question, I edited the google contact for a test phone number. I then called the phone from that tested phone number.
It didn't matter whether the contact was saved in the formats:
317-555-1212
1-317-555-1212
+1-317-555-1212
+317-555-1212
In all cases, the incoming call was recognized as +317-555-1212, which isn't a valid call-back number, and return calls failed. Since this only happened when I put a custom ROM on, I'm sure it's something buried inside the ROM. However, I'm at a loss as to where to check various settings.
Gotta be something deep in there...
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
rugmankc said:
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
Click to expand...
Click to collapse
Interesting thought. I had gone into the dialer settings, and checked the Current Country... it listed United States of America. Then I stopped. But looking further it turns out that in the Assisted Dialing settings just below that, there might be stuff that matters. Currently my assisted dialing is OFF. The settings inside are:
Country code: 1
IDD prefix: 011
NDD prefix 1
City/area code: 131
National number length: 11
The area code probably doesn't matter, but I'm interested in the national number length. Ours tend to be 10. Could you please see what your settings are in there, and let me know if anything is different?
I can always backup (ug, safestrap backup), return to stock, poke around, re-root/restore. But if you could take a quick peek I'd be grateful.
Thank you!
Marc
I tried an alternative dialer... it acted just like the stock with the + thing.
I am on a rom that doesn't have those settings--sorry
Thanks anyway! I experimented changing the last setting to 10, and enabling assisted dialing, and it didn't change anything. Sigh.
Ok, you can still go back to stock with Odin. Or, try one of iB's roms they are very good too, I use them almost exclusively now--
Good Luck--:good:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Frankenscript said:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Click to expand...
Click to collapse
i got the same problem too. We'll get it figured out!
Damani311 said:
i got the same problem too. We'll get it figured out!
Click to expand...
Click to collapse
I figured out the clock on status bar thing. Like someone else said it was under the alignment options ... hidden by default. One by one warts going away.
Sent from my SCH-I337 using Tapatalk
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
jshua said:
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you haven't done so yet i suggest noting the issue in the hyper thread ... either the Verizon or att one depending on your phone. Seems to be a bunch of us... more folks report it the common thread will emerge.
Sent from my SCH-I337 using Tapatalk
Same issue here i can not dial voicemail and can not call a number back without typing the number in manually. Deal breaker for me hope it gets fixed soon so i can go back to Hyperdrive. Or somebody comes up with some sort of fix.
Download Prefixer and remove the + for outgoing call
BBG037 said:
Download Prefixer and remove the + for outgoing call
Click to expand...
Click to collapse
When I get back from vacation I will have to try this. Thanks!
Hi guys, I got hold of my nexus 6p today and I've installed a couple of my most used apps. One of those is the NatWest banking app (UK). However whenever I try to sign in, it says that there is another app trying to interfere with it, and FCs. Now I haven't installed any different apps to what I had on my old phone, so I was just wondering if anyone had the same experience?
Also just to confirm I do not have flux or anything like that running!
Thanks,
hltbest said:
Hi guys, I got hold of my nexus 6p today and I've installed a couple of my most used apps. One of those is the NatWest banking app (UK). However whenever I try to sign in, it says that there is another app trying to interfere with it, and FCs. Now I haven't installed any different apps to what I had on my old phone, so I was just wondering if anyone had the same experience?
Also just to confirm I do not have flux or anything like that running!
Thanks,
Click to expand...
Click to collapse
Running fine on my 6p, make sure you don't get a heads up message, it doesn't like that
Sent from my Nexus 6P using Tapatalk
I'm having the same issue as you. I also tried disabling now on tap to see if that would fix the issue but it hasn't. On my nexus 5 which I upgraded from I was running all the apps I am now. The only difference is the phone. Any idea from anyone else would be really appreciated.
Mine said that initially I think because a notification came through as I was setting up, did it again and it's fine. Not helpful I know, but it should work.
Sent from my Nexus 6P using Tapatalk
Slow finger fix
Josh98 said:
Mine said that initially I think because a notification came through as I was setting up, did it again and it's fine. Not helpful I know, but it should work.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I had the same issue on my Nexus 6p but I tried disable all the app if possible. That was natwest support answer. But that didn't work for me but what did work is when you press the keys to enter your phone number to activate the app. Each press do it very very slowly. I think that what ever other app or process is interfering with the natwest app stops reading the key presses after a few seconds. That give you enough time to type the rest of the numbers needed start the activation of the natwest app.
Db
dark-byte said:
I had the same issue on my Nexus 6p but I tried disable all the app if possible. That was natwest support answer. But that didn't work for me but what did work is when you press the keys to enter your phone number to activate the app. Each press do it very very slowly. I think that what ever other app or process is interfering with the natwest app stops reading the key presses after a few seconds. That give you enough time to type the rest of the numbers needed start the activation of the natwest app.
Db
Click to expand...
Click to collapse
Thanks for your advice.
I tried that and I managed to type in the second line by typing a new number every 10 seconds , however when trying to type the first line it always had the pop up at the 4th number! No matter how slow I go! Really frustrating! But at least that's progress!
Right guys I have found out what the issue was! The issue was - the numbers I was typing in a row. For some reason it didn't like me typing 0741. (The start of my number). I found a way around this by typing out the rest of the phone number then adding the bit it didn't like afterwards! And it worked! I've managed to get on the app now!
E.g
If your number is 1234567890
Type like 124567890 then add the 3 after!
Hope that helps!
hltbest said:
Right guys I have found out what the issue was! The issue was - the numbers I was typing in a row. For some reason it didn't like me typing 0741. (The start of my number). I found a way around this by typing out the rest of the phone number then adding the bit it didn't like afterwards! And it worked! I've managed to get on the app now!
E.g
If your number is 1234567890
Type like 124567890 then add the 3 after!
Hope that helps!
Click to expand...
Click to collapse
Glad to hear that you managed to get the app activated, it's a very strange thing that my number also start 0741. Surely it's not that nos series that is causing the issue. Very very strange. Hopefully the Nat west support team will see our tips in the xda developers. :fingers-crossed:
hltbest said:
Right guys I have found out what the issue was! The issue was - the numbers I was typing in a row. For some reason it didn't like me typing 0741. (The start of my number). I found a way around this by typing out the rest of the phone number then adding the bit it didn't like afterwards! And it worked! I've managed to get on the app now!
E.g
If your number is 1234567890
Type like 124567890 then add the 3 after!
Hope that helps!
Click to expand...
Click to collapse
Perfect! It works! I just entered the last 6 digits of my phone number first then the first five after.
Thanks for finding a work around.
Vollexus said:
Perfect! It works! I just entered the last 6 digits of my phone number first then the first five after.
Thanks for finding a work around.
Click to expand...
Click to collapse
That's alright. Glad to help. How bizarre that so far we only know its due to 0741... Would be interesting to see if its affecting any other numbers?
hltbest said:
That's alright. Glad to help. How bizarre that so far we only know its due to 0741... Would be interesting to see if its affecting any other numbers?
Click to expand...
Click to collapse
My number starts 0788 so confusing :/
Vollexus said:
My number starts 0788 so confusing :/
Click to expand...
Click to collapse
It must just be some random number combinations then... How weird! Have you managed to get around it using the work-around?
hltbest said:
It must just be some random number combinations then... How weird! Have you managed to get around it using the work-around?
Click to expand...
Click to collapse
Yes worked fine. What a weird bug.
My number starts with 0787 and I'm having the issue
I am using pixel experience rom in my xiaomi mi a1.Nowadays i notice nobody can't call me.When Someone call me its says busy or something.When i try to call someone its automatic end the call.Please Someone help me
jubayertonu said:
I am using pixel experience rom in my xiaomi mi a1.Nowadays i notice nobody can't call me.When Someone call me its says busy or something.When i try to call someone its automatic end the call.Please Someone help me
Click to expand...
Click to collapse
Try update of your firmware, flashable zips are in the guides section.
jubayertonu said:
I am using pixel experience rom in my xiaomi mi a1.Nowadays i notice nobody can't call me.When Someone call me its says busy or something.When i try to call someone its automatic end the call.Please Someone help me
Click to expand...
Click to collapse
In the caller write *#*#4636#*#*, select phone information and set the network type as LTE/TD-SCDMA/UMTS OR LTE/TD-SCDMA/WCDMA
Yeisonkirax said:
In the caller write *#*#4636#*#*, select phone information and set the network type as LTE/TD-SCDMA/UMTS OR LTE/TD-SCDMA/WCDMA
Click to expand...
Click to collapse
unable to perform this, the screen goes blank after I tap on the phone information after dialing *#*#4636#*#*
Sayed_mollA said:
unable to perform this, the screen goes blank after I tap on the phone information after dialing *#*#4636#*#*
Click to expand...
Click to collapse
Did you fix it now i have the same problem