hello guys. hopefully I made a thread in right place. So I have a problem with my friends daughters phone (LH H650E). She cannot remember her previous email, so she stuck at FRP. Friend of mine asks me, can I help her and since I did FRP bypass on samsung phones many times, I was like, sure, np, but with LG it looks like different, I cannot make it work, read almost all guides with no success. So I was wondering, I will remove FRP by flashing new Fw, but there were problems again. LG flash tool just cannot finish the job, but LGup can't make it run, because it asks me to select a known model.
I really hope somebody can help me or provide me with some info.
ok, its fine. Found bug by myself.
Related
Here is the issue. A friend of mine had gone a bought a Galaxy Sky SM-S320VL from TracPhone. And had been using the phone without any problems until a couple of weeks ago. Then he decided to do a Factory Reset. Instead of doing the software reset, from with in Settings, he went and did a HARD Reset without unlocking the google account. And guess what, he can't remember the account information for that phone. And came to me to reset the phone. (As I had to deal with this problem in the past with other people and their phones.)
I have downloaded the only stock rom I can find for this phone and flashed it with Odin3. But for some reason the flashing of the rom is never done. By this I mean, the phone downloads the rom as Odin sends it. Odin reports a Success with the flashing. But, when the phone reboots. The system has not been reset and FRP is still active.
I have flashed only the AP, and the phone reboots directly into setup and shows a message about an unauthorized Factory Reset.
I have flash all 4 files in the ROM set (BL, AP, CP, and CSC). and Odin states the flash was a success. The phone reboots, goes to recovery and states Starting System Update. Goes so far into the update, then stops and shows Erasing. After a short time of showing Erasing it reboots to setup. Where again the phone shows the message about authorized Factory Reset.
I have used Odin3 v3.9.0, v3.11.1, v3.11.2, v3.12.5. And I have updated to the latest USB drivers from Samsung.
So my question is this. Has anyone had come across this behavior before? And how can I get past this?
The phones particulars:
Name: Samsung Galaxy Sky
Model #: SM-S320VL(GP)
OS v: 6.0.1
Firmware #: S320VLUDU2APJ3
Model #, as reported by Downloader: SM-S320VL
Note: As a strange side effect of when I flash all 4 rom files. For some reason once the phone has failed the system update, erased and has reboot. I have complete access to the phones User data area from within my computer. But, I am unable to access the phone with adb.
Hey folks,
I'm having the exact same issue as the OP. Odin does a successful install on the phone but I get the unauthorized reset message and then Wifi does not work when prompted on the next screen.
Is there a tracfone version of the rom or a fix that anyone here knows of? Thanks!
@drasnah
I have yet to get any kind of reply from anyone on this. Either now one knows, and is not stating so, or doesn't care.
I have seen the wi- fi fix in another thread.
Modify /system/build.prop:
ro.securestorage.support=true to false
Hope that helps!
20eyes said:
I have seen the wi- fi fix in another thread.
Modify /system/build.prop:
ro.securestorage.support=true to false
Hope that helps!
Click to expand...
Click to collapse
First this is not a wi-fi problem it is a re-flashing of the rom problem.
Second, I do not have access, root or otherwise, to any of the system files on the phone.
Third, with the first two in mind this possible solution is of no help.
Fourth, Re-read my original post. I have given complete detailed information as to what I have access to and what I have done.
Can someone send me a download think for this phone i downloaded one but it won't flash it keeps failing
This device has been locked down by Tradphone and Samsung. It gives errors flashing even the correct stock firmware. It's a piece of garbage. NEVER buy anything from Tracphone. Garbage company. You'll never fix this issue. Only pushed updates will flash via software from sammy and tracphone that is built into the rom..
Curtis1973 said:
This device has been locked down by Tradphone and Samsung. It gives errors flashing even the correct stock firmware. It's a piece of garbage. NEVER buy anything from Tracphone. Garbage company. You'll never fix this issue. Only pushed updates will flash via software from sammy and tracphone that is built into the rom..
Click to expand...
Click to collapse
Not sure if that's correct? It depends on the firmware and odin version being used.
---------- Post added at 10:00 PM ---------- Previous post was at 09:58 PM ----------
Nate1k904 said:
Can someone send me a download think for this phone i downloaded one but it won't flash it keeps failing
Click to expand...
Click to collapse
Post more details on the error, screenshots, firmware and odin version used.
Need to know if works. Or if needing to settle for a different route.
The_WABBIT said:
Here is the issue. A friend of mine had gone a bought a Galaxy Sky SM-S320VL from TracPhone. And had been using the phone without any problems until a couple of weeks ago. Then he decided to do a Factory Reset. Instead of doing the software reset, from with in Settings, he went and did a HARD Reset without unlocking the google account. And guess what, he can't remember the account information for that phone. And came to me to reset the phone. (As I had to deal with this problem in the past with other people and their phones.)
I have downloaded the only stock rom I can find for this phone and flashed it with Odin3. But for some reason the flashing of the rom is never done. By this I mean, the phone downloads the rom as Odin sends it. Odin reports a Success with the flashing. But, when the phone reboots. The system has not been reset and FRP is still active.
I have flashed only the AP, and the phone reboots directly into setup and shows a message about an unauthorized Factory Reset.
I have flash all 4 files in the ROM set (BL, AP, CP, and CSC). and Odin states the flash was a success. The phone reboots, goes to recovery and states Starting System Update. Goes so far into the update, then stops and shows Erasing. After a short time of showing Erasing it reboots to setup. Where again the phone shows the message about authorized Factory Reset.
I have used Odin3 v3.9.0, v3.11.1, v3.11.2, v3.12.5. And I have updated to the latest USB drivers from Samsung.
So my question is this. Has anyone had come across this behavior before? And how can I get past this?
The phones particulars:
Name: Samsung Galaxy Sky
Model #: SM-S320VL(GP)
OS v: 6.0.1
Firmware #: S320VLUDU2APJ3
Model #, as reported by Downloader: SM-S320VL
Note: As a strange side effect of when I flash all 4 rom files. For some reason once the phone has failed the system update, erased and has reboot. I have complete access to the phones User data area from within my computer. But, I am unable to access the phone with adb.
Click to expand...
Click to collapse
J3 sm s320vl... tracfone root availability? Just bought phone hopefully got a good one to root? Or maybe someone knows who maybe be able to... please help
No updates? Interested, I have the same phone.
There is no solution for this phone. It will forever be a Trac-phone.
Yes, it nice to imagine what could had been. If there was a fix for the locked bootloader. Its encrypted, and is highly unlikely to be broken by anyone.
Do not flash the boot.image that some people have suggested
Although that method works on some devices such as the AT&T Samsung Galaxy S5. In this case flashing the boot.image from an unlocked device does nothing but places the phone into an even more precarious situation, that makes it unusable even as a Trac phone.
While its true that this very low budget phone could had been decent with a custom Rom ,
You will not be able to get it working.
I have one that belonged to my daughter a couple of years ago and I managed to get it boot into the system again.
Its only function is as a calculator, or preschool game, the cellular reception and Wifi connections are highly unstable and will not stay connected.
Now it serves as my nieces play toy. I would donate to some poor person at the Salvation Army it if it was useable.
By the way, for anyone reading this.
If you have an old phone that is useable. You could dramatically help a Homeless people, by gifting them with a phone especially, if it has some minutes on it.
This gift will help them schedule job interviews, doctors appointments , etc and you will feel good knowing that you helped someone in need.
I have done this before, and will be dropping off a Blu phone, and Kindle Tablet this week.
tsongming said:
There is no solution for this phone. It will forever be a Trac-phone..
Click to expand...
Click to collapse
It is possible to gain root on this device.
ashyx said:
It is possible to gain root on this device.
Click to expand...
Click to collapse
I have permissible SE Status but can not achieve root on this device. Also, I have not found that anyone has had success rooting this exact model.
To be clear my device is the 2016 TracFone Samsung Galaxy J3 Sky model : SM-S320VL
Build S320VUDU1APG2
Hardware Version S320 VL04
I have found reports of people with S320VLUDU2API3 stating that the were able to achieve root and then assumed that it must also be possible with S320VUDU1APG2.
I am usually the guy that can figure these things out, very often before others. But I have had no success gaining root on this device using published methods. Also, I have not seen one example of someone with this identical device who gained root.
You are apparently the Wizard of these Samsung phones, so if you know of a definite way to root it, please point me towards the solution. I would really appreciate it.
I would love to root this phone, get it working again, and gift it to lady who was beaten by her husband and she is now living in a homeless shelter with her two children. She could use a phone to help with her job search. She would appreciate it.
At the moment this phone can will not keep a signal and I can't attempt the build prop solution without root.
Thank you.
tsongming said:
I have permissible SE Status but can not achieve root on this device. Also, I have not found that anyone has had success rooting this exact model.
To be clear my device is the 2016 TracFone Samsung Galaxy J3 Sky model : SM-S320VL
Build S320VUDU1APG2
Hardware Version S320 VL04
I have found reports of people with S320VLUDU2API3 stating that the were able to achieve root and then assumed that it must also be possible with S320VUDU1APG2.
I am usually the guy that can figure these things out, very often before others. But I have had no success gaining root on this device using published methods. Also, I have not seen one example of someone with this identical device who gained root.
You are apparently the Wizard of these Samsung phones, so if you know of a definite way to root it, please point me towards the solution. I would really appreciate it.
I would love to root this phone, get it working again, and gift it to lady who was beaten by her husband and she is now living in a homeless shelter with her two children. She could use a phone to help with her job search. She would appreciate it.
At the moment this phone can will not keep a signal and I can't attempt the build prop solution without root.
Thank you.
Click to expand...
Click to collapse
See the thread below. Root was gained, albeit temporary. However I believe this is due to kernel panics which may be solved by a few build.prop edits. We had to do the same on the J327T1.
https://forum.xda-developers.com/galaxy-j3-2016/help/samsung-galaxy-j3-sm-s320vl-rooted-t3561762
Also if you firmware S320VUDU1APG2 then why not just update it to the firmware that has been reported to work?
I have found one these phones left on a table of a food truck area, screen was cracked - the device was only getting the android guy with triangle on it, I done some research and found the stock rom and flashed it with odin; as some have mentioned in comments above I also experienced wifi issue, so I thought I had installed incorrect rom - downloaded a different one this was a combination file that was the factory repair rom used for testing the device, but wifi worked - it wasn't a fully working telephone it didnt have the app store, well it really didnt have any apps, but I found I could copy over apk files from my PC to the device and then install them, so the phones not completely useless or junk --- it could be used for something. I myself am using that device as a security camera using IP CAM app works great. I was actually using this device for quiet some time as my roku tv remote, because my actual roku remote grown legs and walked off... i havent tried this, but I am sure you could install a launcher apk such as "apex launcher"
well i wasted enough of your time today...
Hey there guys hope you all are doing great, so basically my aunt had some problem with her mobile data, someone suggested her to hard reset the device so she youtubed it and successfully hard reset her device but UNFORTUNATELY, she doesn't remember the last email and the password she logged in the device with.
Could anyone of you please tell me how to sort it out so i can get some peace [emoji37]
She just cant stop asking me if it got fixed or not.
Sent from my ONEPLUS A3010 using Tapatalk
Search on Youtube, it worked for me !
I had this issue as well. I bought a used phone but it was FRP protected. The only way ourmt was calling up the guy and asking him to log in. FRP is present in place to prevent misuse. And while various YouTube videos will show you bypassing it, Samsung has been repeatedly patching it.
From what I can understand, a sure shot way would be to install a different ROM on it. However with no custom recovery, maybe that's a wee bit more difficult. You could try to use Odin to re-flash a stock ROM. Let us know if this works.
Hello, this is my first post on here, but I have always been such a big fan of all the work that you guys do. I mean, this is just a phenomenal resource. I have recently rooted my Samsung Galaxy S8 (SM-G950U) through the PartCyborgRom method, and it actually went very well with me. I got into a bit of a problem when my root was easily recognized and I couldn't do things, like get into my Snapchat. I saw everyone ranting and raving about how Magisk had a built in feature to hide the root from apps. I then download the Magisk apk and it prompts me to flash it on my phone. If it meant I could keep my streak going with my girlfriend, I figured "Why the Hell not?" So I try to flash it, and it doesn't work the first time. The second time, it goes right through with no problem. When I got the option to reboot, I took it, and instead of getting a new bootloader, I am prompted with the message from Samsung that says "Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost." Now I'm left with what appears to be some soft bricked phone. I have tried flashing the stock firmware, even on Comsy, but all to no avail. I am just trying to figure out how to get this phone back in operation, since I am in the military and it is paramount that I am able to communicate with my Marines again.
jrlong97 said:
Hello, this is my first post on here, but I have always been such a big fan of all the work that you guys do. I mean, this is just a phenomenal resource. I have recently rooted my Samsung Galaxy S8 (SM-G950U) through the PartCyborgRom method, and it actually went very well with me. I got into a bit of a problem when my root was easily recognized and I couldn't do things, like get into my Snapchat. I saw everyone ranting and raving about how Magisk had a built in feature to hide the root from apps. I then download the Magisk apk and it prompts me to flash it on my phone. If it meant I could keep my streak going with my girlfriend, I figured "Why the Hell not?" So I try to flash it, and it doesn't work the first time. The second time, it goes right through with no problem. When I got the option to reboot, I took it, and instead of getting a new bootloader, I am prompted with the message from Samsung that says "Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost." Now I'm left with what appears to be some soft bricked phone. I have tried flashing the stock firmware, even on Comsy, but all to no avail. I am just trying to figure out how to get this phone back in operation, since I am in the military and it is paramount that I am able to communicate with my Marines again.
Click to expand...
Click to collapse
Okay, so here is the update: I went to the Sprint store, and they can't do ****. I went to every resource I could find, and they all give me the same advice. Get Samsung to fix it. I really don't want to concede defeat though, so any help would be greatly appreciated.
By the sounds of it it is a soft brick been in a simular situation have you tried putting it into download mode and reflashed the first ever firmware that came with it
Madnedroj said:
By the sounds of it it is a soft brick been in a simular situation have you tried putting it into download mode and reflashed the first ever firmware that came with it
Click to expand...
Click to collapse
I did. I'm not sure what they did, but I took it to Cell Phone Repair (so if they mess it up further, they pay for it), and they fixed it. They put it on T-Mobile's network though, and so I am dealing with that now.
jrlong97 said:
I did. I'm not sure what they did, but I took it to Cell Phone Repair (so if they mess it up further, they pay for it), and they fixed it. They put it on T-Mobile's network though, and so I am dealing with that now.
Click to expand...
Click to collapse
You should take it back to them and explain that they have locked it to T-mobile and they shpuld unlock it for free
Madnedroj said:
You should take it back to them and explain that they have locked it to T-mobile and they shpuld unlock it for free
Click to expand...
Click to collapse
Already been having it worked on. For some reason, they are having trouble with it.
Hello everyone,
Im in a bit of a pickle and hope someone here can help?
bought a g930p off second hand site, but when got home to fire it up there was the google reset protection on it (FRP), thought no hassle ill just wipe the phone and why not updated it to the latest while at it, so grabbed the latest files (8.0) and flashed the lot with odin, silly me thought this would just clear the phone totally including the FRP, anyway back to stage one of a phone that i cant use,
what ive tried:
z3x tool (asks to start adb, have adb started from platform tools dose nothing)
tried downgrading to 6 to try the OTG cable trick, wont let me downgrade
ive tried a few methods on here as well, but none seem to work anymore, so dose anyone know how to get past this with 8.0 installed ?
Thank you
Also i see there is a twrp for the Exynos version, is there version for the Qualcomm (g930p) version and would that help removing the FRP ?
Guess i should follow up on this, I ended up taking it to a phone repair shop, i asked how he did it and he didn't want to tell me.
So i guess this post is for anyone searching for a solution, wont find it in this thread sorry.
speaker_ said:
Guess i should follow up on this, I ended up taking it to a phone repair shop, i asked how he did it and he didn't want to tell me.
So i guess this post is for anyone searching for a solution, wont find it in this thread sorry.
Click to expand...
Click to collapse
Well what they do is flash a modified SBOOT or Aboot file with adb enabled (because when you're on the setup assistant thats not enabled; you have to go to Developer Settings and blablabla and offcourse that's impossible at this time) then use Z3x to disable frp.... other method used is flashing combination firmwares (these are special FW that are used by the Samsung Engineers that comes with ADB and other usefull things for debugging, but make the phone unusable for everything else) and then the same thing using Z3x or Octopus Box; but I really don't know if theres a Combination FW for Bootloader 8.
Hi All,
I'm really sorry, I'm completely new to all this so hope I'm posting in the right area and explain this issue correctly!
I purchased a dead SAMSUNG T580 Galaxy Tab off ebay and managed to repair the hardware fault which I was pleased about but then encountered the dreaded FRP lock so I still can't use the thing. It's running firmware T580XXS5CTK1 and I've no idea what to do with it now, it's not got the assist option when trying the add network trick, so then I thought I could perhaps use Odin with combination firmware but the only combination firmware I could find even remotely similar was T580XXU5ATD1 which I didn't really expect to work and I was right, the tab just got stuck in a loop and I ended up re-flashing with the T580XXS5CTK1 to get it back to starting correctly.
Does anyone have any suggestions how I can get rid of this lock please? I only bought the thing as an amusement thing during lockdown but it'd be nice to get it fully functional!
Kal-El-77 said:
Hi All,
I'm really sorry, I'm completely new to all this so hope I'm posting in the right area and explain this issue correctly!
I purchased a dead SAMSUNG T580 Galaxy Tab off ebay and managed to repair the hardware fault which I was pleased about but then encountered the dreaded FRP lock so I still can't use the thing. It's running firmware T580XXS5CTK1 and I've no idea what to do with it now, it's not got the assist option when trying the add network trick, so then I thought I could perhaps use Odin with combination firmware but the only combination firmware I could find even remotely similar was T580XXU5ATD1 which I didn't really expect to work and I was right, the tab just got stuck in a loop and I ended up re-flashing with the T580XXS5CTK1 to get it back to starting correctly.
Does anyone have any suggestions how I can get rid of this lock please? I only bought the thing as an amusement thing during lockdown but it'd be nice to get it fully functional!
Click to expand...
Click to collapse
Sorry to say, but FRP is there for a reason. Best to get another device which is unlocked
I got a similar problem. Stuck on 32% with "no command".
For usual, I frozen the emergency service, but I unfrozen all to update apps in samsungs store.
After a restart I got a frp lock, rom was a modified stock of T580XXS5CTK1 and twrp.
I was surprised that I can't solve it this time.
I know fully acc details and pin, but how to use it?
I bought another Tablet, but the A6 is a unique one, I would be very thankful for some help.
I don't know a tablet is solid, stable and easy to repair like A6, some games it still can handle.
Original packaging, invoice, all available, password and pin known, help me please.