Database Users

Moto X Style (DS) XT1572 bootloader unlocking issue....

hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?

Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883

aakashverma0007 said:
Try this https://forum.xda-developers.com/mo...l-windroid-universal-android-toolkit-t3206883
Click to expand...
Click to collapse
not working. the tool booted into bootloader without any issue. upon clicking get unlock key the tool start working and then suddenly an error appears and it crashes.

mkhurram0023 said:
hi guys. i have moto x style dualsim XT1572 variant. attempting to unlock its bootloader to further install twrp and custom roms. upon performing the get_unlock_data step i m getting error. i have already enable oem unlocking and usb debugging in developer option. dont know whats wrong ..... one thing i noticed that "Device is Engineering" is mentioned in bootloader details. can i install/flash TWRP without bootloader unlocking ?
Click to expand...
Click to collapse
So you enter
Code:
fastboot oem get_unlock_data
And you are getting an error? Can you screenshot the error (clearly) or copy and paste the terminal session?
Going to be honest, unless you are doing something incorrectly, there is little we can do... Motorola does have an official forum area for bootloader unlock issues on their support site, although it is a tough to get a response sometimes but this whole mechanism is pretty well locked down to the point that unless it's user error there isn't much we can do.

i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.

mkhurram0023 said:
i am getting below things when i enter "fastboot oem get_unlock_data"
c:\adb>fastboot oem get_unlock_data
. . .
(bootloader) Failed to get unlock data, please try again !
FAILED (remote failure)
finished. total time : 0.013s
c:\adb>
i m unable to post screenshots as i m new use on this forum.
Click to expand...
Click to collapse
That's fine... Can you copy and paste output of
fastboot getvar all
And mask out your IMEI number (but verify its there), please.

C:\adb>fastboot devices
NX7C3A0096 fastboot
C:\adb>fastboot oem get_unlock_data
...
(bootloader) Failed to get unlock data, please try again!
FAILED (remote failure)
finished. total time: 0.010s
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.4C
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: no
(bootloader) hwrev: 0x82A0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=01 TYPE=57 PNM=BGND3R
(bootloader) ram[0]: 3072MB Micron S8 SDRAM DIE=6Gb M5=x3 M6=x0 M7=x0 M8
(bootloader) ram[1]: =x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: NX7C3A0096
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: 5C2725001E000000000000000000
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue May 2 12:18:43 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retla_ds/clark_ds:6
(bootloader) ro.build.fingerprint[1]: .0/MPHS24.49-18-8/4:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.8.clark_retla
(bootloader) ro.build.version.full[1]: _ds.retla.en.01
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255331.29.01.88.02p CLARK_LATAM
(bootloader) version-baseband[1]: _DSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g2c916d9 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goo
(bootloader) kernel.version[2]: gle 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Fri Sep 23 04:52:36 CDT 2016
(bootloader) sbl1.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=5fa1c0c-dirty
(bootloader) hyp.git: git=5fa1c0c-dirty
(bootloader) sdi.git: git=52a3f93
(bootloader) pmic.git: git=MBM-NG-VA0.4C-0-g07bb07e
(bootloader) aboot.git: git=MBM-NG-VA0.4C-0-g1fa1c30
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (75)
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.235s
C:\adb>

mkhurram0023 said:
(bootloader) unlocked: Not supported
(bootloader) securestate: Engineering
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 1 <-- This is the "Bootloader State"
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
Click to expand...
Click to collapse
Here is your problem in bold above... You device has been reflashed by engineering (ie. Motorola repair/support) and not placed back into a production state, it is in Engineering mode. There is nothing you can do, you should contact Motorola support. We have seen this in the Moto G much more than the X, but it definitely happens sometimes. Most of the time customer service won't know what you are talking about and you will have to go to the Lenovo forums, post about it and wait for a Moto support engineer to respond.
The Bootloader State (mot_sst) should be 0, 2, or 3... never 1... 0 means LOCKED, 2 means RELOCKED (was unlocked, but relocked with 'oem lock' procedure), and 3 means UNLOCKED. A value of 1 means Engineering, and that should never be seen in a production device.
Also, that bootloader date and sku looks messed up (unless you masked that as well), I don't recall seeing other engineering state devices with that. There are some other weird parameters that make me think this device has had problems before too, but they are not as important as what I noted above.
There is nothing you can do, you need to either leave it as is... assuming it is operating normally, or contact Motorola/Lenovo to correct the issue.
EDIT: See this thread for more information: https://forums.lenovo.com/t5/MOTORO...g-and-Unlocked-bootloader-status/td-p/3420219

Moto E4 XT1765 (MetroPcs) Super Hard-Bricked?

Hello Everyone, I was attempting root and well alot of things didn't go as planned and as a result I have no recovery, oem-lock as been enabled and I'm only able to boot into fastboot. a "fastboot getvar all" is as follows
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.26(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE13MB RV=08 PV=0D FV=000000000000000D
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: d6a09b30
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VBA.26-0-g87d0ac5
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.323s
Is there anyway back from this? Or is it looking like "get another off ebay, and don't be so [email protected] careless!" Thanks in advance.

tboned82 said:
Hello Everyone, I was attempting root and well alot of things didn't go as planned and as a result I have no recovery, oem-lock as been enabled and I'm only able to boot into fastboot. a "fastboot getvar all" is as follows
Code:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.26(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE13MB RV=08 PV=0D FV=000000000000000D
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: d6a09b30
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VBA.26-0-g87d0ac5
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.323s
Is there anyway back from this? Or is it looking like "get another off ebay, and don't be so [email protected] careless!" Thanks in advance.
Click to expand...
Click to collapse
Might start here. I'm not sure and can't look right now myself.
http://www.spflite.com/Index.html?Downloads.html
Sent from my [device_name] using XDA-Developers Legacy app

@tboned82
You haven't unlocked the bootloader. OEM lock is not the proper command. You can't just do oem unlock either. You have to get an unlock code from Motorola. You haven't said what you actually did, what happened, what guide you followed, how far you got, nothing.
You have to give some info before anyone can help you.

madbat99 said:
@tboned82
You haven't unlocked the bootloader. OEM lock is not the proper command. You can't just do oem unlock either. You have to get an unlock code from Motorola. You haven't said what you actually did, what happened, what guide you followed, how far you got, nothing.
You have to give some info before anyone can help you.
Click to expand...
Click to collapse
Oh but I have unlocked the bootloader, I got a code and everything I followed all the instructions on this guide
HTML:
https://forum.xda-developers.com/moto-e4/moto-e4-qualcomm-roms-kernels-recoveries--other-development/guide-xt1766-stock-firmware-restoration-t3775347
as well as this one as well
HTML:
https://forum.xda-developers.com/moto-e4/how-to/complete-noob-guide-to-rooting-metropcs-t3701234
I ran into trouble when I formatted /data partition (just wiped it clean, without a way to boot into the system) I then followed the guide in the first link and I'm where I'm at now it's when I downloaded the files from the first link and started issuing the given commands in when oem-unlock when away and it was locked again. But yes I did have the device oem unlocked at one point.

whodisname said:
Might start here. I'm not sure and can't look right now myself.
http://www.spflite.com/Index.html?Downloads.html
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I have done this, without success...I'm just using windows in a Virtual enviroment, though I'm able to access fastboot commands in both my virtualized windows enviroment and my native Manjaro one as well.

tboned82 said:
I have done this, without success...I'm just using windows in a Virtual enviroment, though I'm able to access fastboot commands in both my virtualized windows enviroment and my native Manjaro one as well.
Click to expand...
Click to collapse
Glad you started a thread on this. There is a way out of this.
@kartik verma has a guide that can help you out on this. Since your bootloader is locked again it won't matter if you run the command to lock it back. However, with our variant you might have some trouble, so READ CAREFULLY steps 1-3.
https://forum.xda-developers.com/moto-e4/how-to/moto-e4-guide-stock-firmware-restore-t3661684
Things You Should Know Going Into It:
1. On our variant when you try to erase anything via fastboot is will say "PERMISSION DENIED". Run the command anyway and see what I mean - so you can effectively skip the ERASE PART of the guide. Instead, go straight to reinstalling over the files already there. It does that even when the bootloader is unlocked, and I have no idea why.
2. Download the firmware officially from Motorola from here:https://firmware.center/firmware/Motorola/Moto E4/Stock/ From there, download the following PERRY_METROPCS_C_7.1.1_NCQ26.69-46_cid22_subsidy-MPCS_regulatory-DEFAULT_CFC.xml.zip. It's the earliest one I know of that came on my phone that will not give you any problems flashing Magisk v14 later once you restore. Very important.
3. Extract the firmware to a single folder to your desktop. Makes it easier navigating later.
4. Download Minimal ADB and Fastboot. Don't use any other Fastboot. Trust and believe, its easier; Save Minimal ADB and Fastboot to your C:/ Drive.
5. In order to flash the files accordingly, you are going to have to pull firmware individual files (i.e. boot.img and system sparschunk files) to the Minimal ADB folder. Keep track of them.
6. You really only need to follow steps 1-3. Don't go past there.
---------- Post added at 03:52 AM ---------- Previous post was at 03:45 AM ----------
In my case when my phone hard bricked (wouldn't boot past recovery splash or the N/A splash) I could still get to fastboot. I flashed boot.img, and ALL of the system sparse chunk files. That brought me back enough to load recovery and delete everything and flash anew. However, If you think you've deleted the system, plus your bootloader is locked again you're probably going to have to reflash all of those files. I'd say as long as you have fast boot, reflash through fastboot boot.img, and every single system_sparsechunk files. Reboot and see what happens. If it doesn't work, keep on flashing until you re-restore the phone completely. If you start getting errors, refer to the rest of kartik's guide. (Steps 4- to completion) and ask me questions. There really isn't a definitive one size fits all variants for this phone - ours is special.
---------- Post added at 04:06 AM ---------- Previous post was at 03:52 AM ----------
Here is my getvar for you to see in comparison (I blocked off sensitive info like my IMEI and UID)
Code:
Minimal ADB and Fastboot>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BA.09(*)
(bootloader) product: perry
(bootloader) board: perry
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZY224GRCFF
(bootloader) cid: 0x0016
(bootloader) channelid: 0x8e
(bootloader) uid: ********00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: *classified by order of your government*
(bootloader) meid:
(bootloader) date: 09-13-2017
(bootloader) sku: XT1765
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/perry_metropcs_c/perry:7.
(bootloader) ro.build.fingerprint[1]: 1.1/NCQ26.69-46/46:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full[0]: Blur_Version.26.11.46.perry_metro
(bootloader) ro.build.version.full[1]: pcs_c.MetroPCS.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.6.r1-03800-89xx.0
(bootloader) version-baseband: M8917TMO_18.08.04.12R PERRY_NA_UMTS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.31-perf-g9acc907-0000
(bootloader) kernel.version[1]: 6-g486eb8a ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Tue Jun
(bootloader) kernel.version[3]: 20 09:51:52 CDT 2017
(bootloader) sbl1.git: git=MBM-NG-VBA.09-0-ge2011ab
(bootloader) rpm.git: git=MBM-NG-VBA.09-0-gc6ac81e
(bootloader) tz.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) devcfg.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) keymaster.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) cmnlib.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) cmnlib64.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) prov.git: git=MBM-NG-VBA.09-0-g2883cde
(bootloader) aboot.git: git=MBM-NG-VBA.09-0-gcae5764-dirty
(bootloader) qe: qe 1/1
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: metropcs

Well I was hoping to return with a success story, unfortunately that's not the case, I have tried many times on both my Linux and virtualized Windows environment of flashing files from the provided link without luck, as a result of the oem_lock bit being mysteriously reset, (actually upon googling "Failed to initialize partition table" I've found many results, mostly relating to the Moto G4 with others experiencing the same mysterious relocking issue I have)
Since I was getting nowhere very slowly via Fastboot I had started looking elsewhere for a solution and came upon Blankflash (initialized my issuing "fastboot oem blankflash" and operated via the "Qpst" Software squite) which looks very promising except for our stock (and most others actually) firmware files not including the necessary prog_emmc_firehose_8917.mbn files nor the rawprogram.xml files either (
HTML:
https://forum.xda-developers.com/watch-2/development/rom-bootloader-recover-huawei-watch-2-t3624657/post72744084#post72744084
short but alot of useful information on this method... and despite the generic naming of the firehose.mbn files I found they are very device specific I'm currently looking to see if there's a way to extract the information required from the stock Moto Firmware we currently have access to and covert them to the format required my Qfil, but information on flashing through the Qualcomm software is hard to track down.
Through my research I also came across some very interesting exploits that would also solve the flashing issues I'm having https://alephsecurity.com/2018/01/22/qualcomm-edl-2/ but (in my opinion) the methods of carrying out the exploits isn't explained very well, and as I don't understand assembly language am hesitant to experiment with.
My Questions
1. Does anyone have experience flashing through the Qpst suite and be able and willing to help with this?
2. Anyone with enough knowledge of assembly/programming to be able to write code for my device that'll disable the boot locking bit enabling me to flash the already provided Moto Firmware via Fastboot?
Thanks for anyone that takes their time into looking into this for me

tboned82 said:
Well I was hoping to return with a success story, unfortunately that's not the case, I have tried many times on both my Linux and virtualized Windows environment of flashing files from the provided link without luck, as a result of the oem_lock bit being mysteriously reset, (actually upon googling "Failed to initialize partition table" I've found many results, mostly relating to the Moto G4 with others experiencing the same mysterious relocking issue I have)
Since I was getting nowhere very slowly via Fastboot I had started looking elsewhere for a solution and came upon Blankflash (initialized my issuing "fastboot oem blankflash" and operated via the "Qpst" Software squite) which looks very promising except for our stock (and most others actually) firmware files not including the necessary prog_emmc_firehose_8917.mbn files nor the rawprogram.xml files either (
HTML:
https://forum.xda-developers.com/watch-2/development/rom-bootloader-recover-huawei-watch-2-t3624657/post72744084#post72744084
short but alot of useful information on this method... and despite the generic naming of the firehose.mbn files I found they are very device specific I'm currently looking to see if there's a way to extract the information required from the stock Moto Firmware we currently have access to and covert them to the format required my Qfil, but information on flashing through the Qualcomm software is hard to track down.
Through my research I also came across some very interesting exploits that would also solve the flashing issues I'm having https://alephsecurity.com/2018/01/22/qualcomm-edl-2/ but (in my opinion) the methods of carrying out the exploits isn't explained very well, and as I don't understand assembly language am hesitant to experiment with.
My Questions
1. Does anyone have experience flashing through the Qpst suite and be able and willing to help with this?
2. Anyone with enough knowledge of assembly/programming to be able to write code for my device that'll disable the boot locking bit enabling me to flash the already provided Moto Firmware via Fastboot?
Thanks for anyone that takes their time into looking into this for me
Click to expand...
Click to collapse
I'm just getting a notification about this now. Sorry about that. Did you ever unbrick the phone?
To answer your questions, I'm not hip to the Qpst suite. If flashing everything back in Command Prompt on windows didn't work, you may have very well bricked it.

Articul8Madness said:
I'm just getting a notification about this now. Sorry about that. Did you ever unbrick the phone?
To answer your questions, I'm not hip to the Qpst suite. If flashing everything back in Command Prompt on windows didn't work, you may have very well bricked it.
Click to expand...
Click to collapse
i have brick Moto E4 XT 1765
CPU MSM 8917
metropcs
please help me, flash.bat not work i have trying lots of methood but not success

Mirani said:
i have brick Moto E4 XT 1765
CPU MSM 8917
metropcs
please help me, flash.bat not work i have trying lots of methood but not success
Click to expand...
Click to collapse
I'll try.
Please, in GREAT DETAIL, tell me everything you did to brick it. Step by step. And if you can, tell me the original baseband on the phone. Once I have that I can tell you better how to proceed.

Moto E4 XT 1765 hard brick
Articul8Madness said:
I'll try.
Please, in GREAT DETAIL, tell me everything you did to brick it. Step by step. And if you can, tell me the original baseband on the phone. Once I have that I can tell you better how to proceed.
Click to expand...
Click to collapse
i have unlock boot loader working fine on stock firmware version
NCQ 26.69.46_cid22_subsidy-MPCS_regulatory. but not rooted working charm, after few day i have connected on wifi server suddenly i have received pop up OTA new security patch ready for install i have just installed this patch and my mobile going installing, then erasing after that now not showing anything i have hard brick my own phone with my little negligence.
when i connected to pc just tray icon show HS_USB_Qdloader 9008 and only detected by flash.bat and Qualcomm Snapdragon Flash Tool
plz help me out this headache

Mirani said:
i have unlock boot loader working fine on stock firmware version
NCQ 26.69.46_cid22_subsidy-MPCS_regulatory. but not rooted working charm, after few day i have connected on wifi server suddenly i have received pop up OTA new security patch ready for install i have just installed this patch and my mobile going installing, then erasing after that now not showing anything i have hard brick my own phone with my little negligence.
when i connected to pc just tray icon show HS_USB_Qdloader 9008 and only detected by flash.bat and Qualcomm Snapdragon Flash Tool
plz help me out this headache
Click to expand...
Click to collapse
Let me see if I have this correctly.
You had a stock rom on your phone which you mentioned NCQ.
Then you connected your phone to the wifi.
Then you of your own volition took an update.
This update erased whatever you did trying to get root.
Then your phone bricked.
Now when you attach it to a PC it is showing HS_USB_Qdloader 9008
Is that right?
You need to pull the following firmware and try and flash it...PERRY_METROPCS_C_7.1.1_NCQ26.69-46_cid22_subsidy-MPCS_regulatory-DEFAULT_CFC.xml
I've never heard of your firmware. Try that firmware and flash it piece by piece and see if that gets you back working.

Hello, the same problem xt1765 metropcs HS_USB_Qdloader 9008, with that tool will get the firmware? Does not enter fastboot, help

If The phone does not enter fastboot mode you can only fix it by flashin the original stock firmware using SP flash tools and thr correct scatter fileusing format all including formatting the bootloader

TheLastAlphaUK said:
If The phone does not enter fastboot mode you can only fix it by flashin the original stock firmware using SP flash tools and thr correct scatter fileusing format all including formatting the bootloader
Click to expand...
Click to collapse
Again you are answering people with facts about the mediatek version, these ones have the Qualcomm version, therefore, SPflash tool does not apply

My bad cant I use the ADB sideload or update commands to reflash a stock firmware package. ? In kinda in a rush trying to answer all these questions I will look at it when I can sorry

Moto G7 (Soft brick?)

Hi Guys, i have a moto g7 1962-4.
After flashed the lineage os rom, and installed wrong modules, i decided to install the Havoc Os, after that, my cellphone's restarted on the fastboot(secure) screen.
The oem_turns to lock, says oem_lock
and, i can't flash roms.
The error on start: failed to initialize partition table.
No Bootable A/B Slot, and failed to boot Linux, falling back to the fastboot.
here is my bootloader informations:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-a5c9d71-190801
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-a5c9d71-190801
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
i can't flash nothing, Its giving me, ex:
Setting current slot to 'a'...
(bootloader) Command is not allowed
FAILED (remote failure)
finished. total time: 0.037s
Remote Failure.
Can someone help me? please angelllllllllllllss

Try to flash the stock firmware. It must be signed and the same version as already installed.
Even if the bootloader is locked you can flash it.

WoKoschekk said:
Try to flash the stock firmware. It must be signed and the same version as already installed.
Even if the bootloader is locked you can flash it.
Click to expand...
Click to collapse
and the fastboot details? its like, corrupted?

WoKoschekk said:
Try to flash the stock firmware. It must be signed and the same version as already installed.
Even if the bootloader is locked you can flash it.
Click to expand...
Click to collapse
Dont Work, Remove Error

Are you able to boot into TWRP via "fastboot boot twrp.img" ? Is there any fastboot command executable on your device?
Can you enter the stock recovery?

WoKoschekk said:
Are you able to boot into TWRP via "fastboot boot twrp.img" ? Is there any fastboot command executable on your device?
Can you enter the stock recovery?
Click to expand...
Click to collapse
Nope, i cant go to the Stock Recovery, and the fastboot boot twrp.img dont work.

if you can't run the following commands then maybe you will need a blankflash...
Just use the gpt.bin and bootloader.img files from your stock rom:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader

Or try RSDlite or any Motorola repair software...

WoKoschekk said:
if you can't run the following commands then maybe you will need a blankflash...
Just use the gpt.bin and bootloader.img files from your stock rom:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
Click to expand...
Click to collapse
Gpt and bootloader don't installs, the remote error its back.

WoKoschekk said:
Or try RSDlite or any Motorola repair software...
Click to expand...
Click to collapse
i tried, the RSD, and not recognize the phone.

So, you can't do anything... I guess the only chance to fix your phone is a blank flash.
I'm sorry but I don't know how to do that.
It would be better for you to use the search function.
Good luck!!

GordinhoBr said:
Hi Guys, i have a moto g7 1962-4.
After flashed the lineage os rom, and installed wrong modules, i decided to install the Havoc Os, after that, my cellphone's restarted on the fastboot(secure) screen.
The oem_turns to lock, says oem_lock
and, i can't flash roms.
The error on start: failed to initialize partition table.
No Bootable A/B Slot, and failed to boot Linux, falling back to the fastboot.
here is my bootloader informations:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-a5c9d71-190801
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-a5c9d71-190801
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
i can't flash nothing, Its giving me, ex:
Setting current slot to 'a'...
(bootloader) Command is not allowed
FAILED (remote failure)
finished. total time: 0.037s
Remote Failure.
Can someone help me? please angelllllllllllllss
Click to expand...
Click to collapse
Got the same here brow. I've tried everything without success. I took the cell phone in the authorized service and they charged me incredible 840 reais to fix (the phone already costs 899 new in the store). In the G7 plus forum there is a topic talking about Blank Flash. I tried to do it but I need the singleimage.bin file for the G7 model, since there the file is for G7 plus and it doesn't fit. I didn't find this file anywhere on the internet so I tried to build mine. apparently needs to extract the booloader.img file and create from the extracted files the singleimage.bin file with a program called star. For now, assists cannot recover. I already put mue G7 in the drawer and bought an a50, because I believe that in a few months this blank flash file will appear on the internet and solve our case. anyway, good luck! and any news please let me know here! I will do the same.

diegovmsouza said:
Got the same here brow. I've tried everything without success. I took the cell phone in the authorized service and they charged me incredible 840 reais to fix (the phone already costs 899 new in the store). In the G7 plus forum there is a topic talking about Blank Flash. I tried to do it but I need the singleimage.bin file for the G7 model, since there the file is for G7 plus and it doesn't fit. I didn't find this file anywhere on the internet so I tried to build mine. apparently needs to extract the booloader.img file and create from the extracted files the singleimage.bin file with a program called star. For now, assists cannot recover. I already put mue G7 in the drawer and bought an a50, because I believe that in a few months this blank flash file will appear on the internet and solve our case. anyway, good luck! and any news please let me know here! I will do the same.
Click to expand...
Click to collapse
send me you phone number.

Do you have access to Fastboot mode, right?

River blankflash is available on Tel$gram

HueyT said:
River blankflash is available on Tel$gram
Click to expand...
Click to collapse
On what now?

iamcubeman said:
On what now?
Click to expand...
Click to collapse
Telegram

Im in a chicken egg situation, please help!

So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...

cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk

Thanks
sd_shadow said:
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Gonna try, i will post the updates as soon as i can!

Update
sd_shadow said:
Try LMSA's Flash Rescue option
Leave phone in fastboot mode.
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
"Failed to match the connected device.
Reconnect device, then try again."
The phone is connected and in fastboot mode.

UPDATE 4
cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...
Click to expand...
Click to collapse
I attach a getvar all for you
>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ufs: N/A
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY3232R25R
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: B6D17C90
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: IHAVEIMEIBUTICENSOREDIT
(bootloader) meid:
(bootloader) date: 12-05-2018
(bootloader) sku: XT1926-6
(bootloader) carrier_sku: XT1926-6
(bootloader) battid: SB18C208
(bootloader) battery-voltage: 4068
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert_n/evert_n:9/PPWS29.
(bootloader) ro.build.fingerprint[1]: 116-11-16/5555b:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.26.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gf134223-0256
(bootloader) kernel.version[1]: 0-g4e158e0 ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Thu Jan 2 01:06:09 CST
(bootloader) kernel.version[4]: 2020
(bootloader) git:abl: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) git:xbl: MBM-3.0-evert_retail-b872199-200102
(bootloader) gitmic: MBM-3.0-evert_retail-b872199-200102
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-200102
(bootloader) git:tz: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:hyp: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:devcfg: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:keymaster: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) gitrov: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:storsec: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retar
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.203s

cowb0y said:
So i buy a new battery for my dead moto g6+, and encountered with the following problems.
Its a xt1926-6 Evert RETAR
1st: baseband not found, no wifi, and no signal, so i cant pass the google wizard setup
2st: Cant flash a stock firmware/rom cause i didnt have the usb depuration on, and no oem locked (cant turn on beacuse i cant access the phone, like i said in the 1st problem)
Recovery mode works.
Already tried: Flashing stock rom/firmware via ADB, flashing stock rom/firm via SD, bypassing google wizard (also i have the account, but no internet to login), reverse tethering to give the phone internet but didnt work too.
If anyone can give me help, i will aprecciate it, im so frustrated and been fighting with this phone for 4 days.
UPDATE: LMSA gives me two errors first "Failed to match the connected device.
Reconnect device, then try again."
second error: just stays in "wait for matching firmware, don't unplug your device"
(i put my stock folder in the LMSA download folder but just stays like i said
UPDATE 2: i forgot to mention it but when i get to the part of flashing that says "fastboot erase DDR" i got this error back:
>fastboot erase DDR
erasing 'DDR'...
(bootloader) Invalid partition name DDR
FAILED (remote failure)
finished. total time: 0.006s
UPDATE 3: trying to at least repair the wifi to pass the google wizard encountered the following problem doing some tutorial i read in another forum.
>fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.220s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.223s
That means i dont have the system formated?
I dont know what to do anymore guys...
Click to expand...
Click to collapse
If your phone is currently flashed with the stock rom, the only way to fix bootloader lock would be to enter edl mode. That means hard bricking on purpose ?

reply
mrsiri said:
If your phone is currently flashed with the stock rom, the only way to fix bootloader lock would be to enter edl mode. That means hard bricking on purpose
Click to expand...
Click to collapse
can you explain to me how i can do that? also sorry for not replying on time,i have same internet issues.
Also i need all the help i can get, because my moto g4 is slowly dying, having ghost touchs, etc. i want to use the g6 +

actualization
So i found a nano sim to try on, and the phone didnt read it, its like i didnt put the sim.
Now im desperate, i tried to formate the phone via fastboot, got this message:
PS C:\Users\cowb0y\Desktop\platform-tools> fastboot -w
Erase successful, but not automatically formatting.
File system type raw not supported.
Erase successful, but not automatically formatting.
File system type not supported.
erasing 'userdata'...
OKAY [ 0.387s]
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.392s
i noticed that one partition is on raw format.
I dont know what to do anymore.

cowb0y said:
I attach a getvar all for you
>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ufs: N/A
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY3232R25R
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: B6D17C90
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: IHAVEIMEIBUTICENSOREDIT
(bootloader) meid:
(bootloader) date: 12-05-2018
(bootloader) sku: XT1926-6
(bootloader) carrier_sku: XT1926-6
(bootloader) battid: SB18C208
(bootloader) battery-voltage: 4068
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert_n/evert_n:9/PPWS29.
(bootloader) ro.build.fingerprint[1]: 116-11-16/5555b:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.26.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gf134223-0256
(bootloader) kernel.version[1]: 0-g4e158e0 ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Thu Jan 2 01:06:09 CST
(bootloader) kernel.version[4]: 2020
(bootloader) git:abl: MBM-3.0-evert_retail-8e93af8-200102
(bootloader) git:xbl: MBM-3.0-evert_retail-b872199-200102
(bootloader) gitmic: MBM-3.0-evert_retail-b872199-200102
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-200102
(bootloader) git:tz: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:hyp: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:devcfg: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:keymaster: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) gitrov: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) git:storsec: MBM-3.0-evert_retail-763d5fe-200102
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retar
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.203s
Click to expand...
Click to collapse
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml

reply
sd_shadow said:
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml
Click to expand...
Click to collapse
i think a got a netbook with w7 to try rsd lite, gonna try in a few hours and post the results.
No, im trying with the 116-11-16 versions https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-16_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml.zip (and the same but from 2019 date)
i will try with the version you handed me.

I give up
sd_shadow said:
If you have access to a Window 7 or XP machine ?
you could try RSD Lite
Are you using this firmware?
https://mirrors.lolinet.com/firmware/moto/evert/official/RETAR/
XT1926-6_EVERT_RETAR_9.0_PPWS29.116-11-23_subsidy-DEFAULT_regulatory-XT1926-6-ARGENTINA_CFC.xml
Click to expand...
Click to collapse
Well i installed w7 to try rsd, but all i got is "failed to switch to fastboot" the phone is already in bootloader mode.
Also try to flash manually the version that you give me, but got error on at least 5/6 files, retry, and all good, but still the same problem.
I dont know what to do anymore, tomorrow i will take the device to a "technician" i dont have hope on this...

Help needed moto G5 plus - stuck in fastboot menu? cant flash?

I have spent the last 12 hours trying to fix this. I am tech savvy but have never flashed a cellphone before, hence I dunno if I am doing something wrong. And apologies if my terms aren't correct. please correct me when I am wrong.
Phone is a moto G5 plus XT1681 (according to imei), one day it powered to fastboot (see image 1) and what ever I try to press, I get an error. (see image 2)
I followed and tried many guides. but especially this one
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com
when I try to run the first line of the script I get the following error.
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot oem fb_mode_set
FAILED (remote: '')
fastboot: error: Command failed
If I keep advancing in the code I get the same error than this guy
Bricked MOTO G5(XT1676) stucked at fastboot menu
hELLO.. I have had a moto g5 with oreo and magisk installed I tried to unistall magisk from magisk app after reboot it told me that startup failed then flashed an nougat rom and it worked perfectly but without imei numbers so i deleted cache from...
forum.xda-developers.com
the phone is detectable with command "fastboot devices"
Despite running this, the phone still stays "oem_locked" like in the images
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot oem unlock
(bootloader) feature disabled
OKAY [ 0.017s]
Finished. Total time: 0.018s
I tried also installing TWRP and I get this error (because maybe that bypasses a locked bootloader?)
"(bootloader) Preflash validation failed
FAILED (remote failure)¨
And here is the log for what I learned that you always ask for
C:\Users\ADj\Desktop\moto g\Tiny ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.92(*)
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG QX13MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=1F
(bootloader) cpu: MSM8953
(bootloader) serialno: ca31f0ad
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 423FF92E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 534773760
(bootloader) reason: Last time flashing failed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VC0.92-0-g3ea8df0
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.175s
QUESTIONS
Am I just confusing rom because of firmware or country?
is all of this because my bootloader seems locked?
do I just need to get to recovery mode first?
I just want the phone to work, don't care for the data inside.
Other people that seem to be stuck with the same problem
https://forum.xda-developers.com/t/...-question-noob-friendly.3963645/post-85232253
THANKS IN ADVANCE AND SORRY FOR THE LONG POST I WANTED TO GIVE ALL MY INFORMATION AND RESEARCH

Same problem here.