Database Users

Need Instructions to avoid almost bricking again

Hi guys. I very narrowly (somehow) managed to recover from almost bricking my phone.
I successfully S-Off'd my phone, and previously successfully installed TWRP. I tried to install this ROM:
https://forum.xda-developers.com/ve...m-perfumewl-m60-dev-edition-unlocked-t3442969
When I tried the to flash the ZIP for firmware and for the ROM, the firmware wouldn't install. I tried some other stuff and basically almost bricked my phone. Some how got it to suddenly start being able to use the htc_fastboot commands (????????) and was able to start installing the zip for stock... but it ran an error, I ran it again and it froze... then I forced my phone to reboot and somehow I'm back to having a stock system. No clue what I did.
My question is, can I take a software update on my phone normally (to 7.0) , and then install just that ROM? Or so I need to flash the firmware separately with a command line command? I just don't want to give myself another heart attack tonight. Current firmware version is 1.82.605.6, not rooted, don't believe my recovery is TWRP right now (but I know how to install that one).
I'm just looking for root access and the ability to remove pre-installed Verizon crap (VZW Messager, My Verizon, etc). Thanks guys.

CritKlepka said:
Hi guys. I very narrowly (somehow) managed to recover from almost bricking my phone.
I successfully S-Off'd my phone, and previously successfully installed TWRP. I tried to install this ROM:
https://forum.xda-developers.com/ve...m-perfumewl-m60-dev-edition-unlocked-t3442969
When I tried the to flash the ZIP for firmware and for the ROM, the firmware wouldn't install. I tried some other stuff and basically almost bricked my phone. Some how got it to suddenly start being able to use the htc_fastboot commands (????????) and was able to start installing the zip for stock... but it ran an error, I ran it again and it froze... then I forced my phone to reboot and somehow I'm back to having a stock system. No clue what I did.
My question is, can I take a software update on my phone normally (to 7.0) , and then install just that ROM? Or so I need to flash the firmware separately with a command line command? I just don't want to give myself another heart attack tonight. Current firmware version is 1.82.605.6, not rooted, don't believe my recovery is TWRP right now (but I know how to install that one).
I'm just looking for root access and the ability to remove pre-installed Verizon crap (VZW Messager, My Verizon, etc). Thanks guys.
Click to expand...
Click to collapse
I recommend you install this one instead:
https://forum.xda-developers.com/ve...m-1-85-605-9-aroma-root-root-debloat-t3529732
Follow instructions in OP...or:
1)fastboot flash FW w/o Boot w/ TWRP (htc_fastboot oem rebootRUU, fastboot flash zip...)
2)htc_fastboot reboot-bootloader
3) Finally, go into recovery-- backup and flash ROM (choose root w/ Magisk and debloat)

Thanks, I figured out why it wasn't working before. Used official TWRP, thats why it wasn't working. Wouldn't have thought that'd made that much of a difference.
New problem though; something I really would like to use the Google versions of contacts and dialers. Trying to flash those just made my phone app unusable. So I turned to LineageOS but it REFUSES to boot. Hangs on their little vertical line with a moving circle. Found out AOSP roms don't like VZW firmware? Flashed global firmware, updated through WiFi as much as possible, and then ran into issues with radio, even though I flashed the VZW one. So I reverted those changes, am going through with what you said above to have a working phone (after not having one all day), but any advice on getting Google dialer and contacts? I'd like to use LineageOS but I couldn't get it work at all.

CritKlepka said:
Thanks, I figured out why it wasn't working before. Used official TWRP, thats why it wasn't working. Wouldn't have thought that'd made that much of a difference.
New problem though; something I really would like to use the Google versions of contacts and dialers. Trying to flash those just made my phone app unusable. So I turned to LineageOS but it REFUSES to boot. Hangs on their little vertical line with a moving circle. Found out AOSP roms don't like VZW firmware? Flashed global firmware, updated through WiFi as much as possible, and then ran into issues with radio, even though I flashed the VZW one. So I reverted those changes, am going through with what you said above to have a working phone (after not having one all day), but any advice on getting Google dialer and contacts? I'd like to use LineageOS but I couldn't get it work at all.
Click to expand...
Click to collapse
You've got to read OPs, search threads, etc. Some ROMs work w/ our phone, and some do not. Check out the latest versions of ice and leedroid. Your most likely want to grab the SVN versions is the official versions may not yet support Verizon N firmware

Antny6 said:
You've got to read OPs, search threads, etc. Some ROMs work w/ our phone, and some do not. Check out the latest versions of ice and leedroid. Your most likely want to grab the SVN versions is the official versions may not yet support Verizon N firmware
Click to expand...
Click to collapse
I have been doing a lot of searching, but I've found so many different, conflicting sources of information. For example, one website told me to install LineageOS, was to be on latest Verizon OTA and just normally flash it; that obviously didn't work.
So from what I can see, our choices are Viper, Ice, LeeDroid, NuSense and the one you linked. I'm going to try out LeeDroid... out of curiousity, is there any reason, for example, LeeDroid or Ice haven't posted in this Verizon section with links to their ROMs?
*Edit Two* Dialer wouldn't work out of the "box" so to speak, so I had to go to Phone settings at the bottom, there is a menu called Calling Accounts. Had to go there and tap Receive Incoming Calls... why is that disabled in the first place..? But that seems to be an issue going even as far back as the Nexus 5. But that's how you find the option in the HTC 10 for anyone who comes across this issue too...

Not sure why your having issues with the flashing. Are you doing a full wipe? Not just factory reset. Going from stock to lineage requires a complete format of internal SD card. On the stock roms, most will ask if you are still on marshmallow firmware & are working fine. Again, we need more info on what firmware version your on, version of twrp& how your wiping your device. Most AOSP roms work, but no advanced calling

LOS ROMs will work without issue IF you have flashed the US unlocked firmware at some point in time. This is the only information that we have found from a VzW device with LOS booting and VzW device without. We started a thread awhile ago and is the only known method we currently know of to get LOS booting. Also works for Sprint users.
https://forum.xda-developers.com/verizon-htc-10/how-to/how-to-cm-booting-vzw-vzw-firmware-t3500900

Installing new os in zuk z1

Hi... I have updated my phone to LineageOS successfully but I lost fingerprint option. I'm getting system update options in Settings but when I tried to update the stuck in bootloop and I was able to get it to work by entering some codes in this forum... First, I have unlocked the bootloader and rooted my phone and installed TWRP and flashed LineageOS. All went good but I lost the fingerprint option and auto rotate and some features are not working properly. If I want to update it again to the latest version, do I have to unlock bootloader, root again? Please help... My phone was good before I updated it

Kishorechittem said:
Hi... I have updated my phone os successfully but I lost fingerprint option. My concern is how to update os again as I have already unlocked bootloader and rooted my phone
Click to expand...
Click to collapse
Which os did you update and which rom was it before. Please tell exact versions and if you have the regarding links.
Normally that happens without the right firmware like marshmallow before installing a nougat rom. But let's see what's the problem of yours.

Essential PH-1 downgrade

Hello yall!
So I am at a complete loss on how to fix the issues with my Essential device.
So I decided to post here in as much detail as I can and hopefully receive some answers.
I purchased my phone used from eBay about a month ago.
According to the listing it was factory unlocked.
I have AT&T prepaid.
Everything was running smoothly for about a week until I receive the notification for the Android Pie OTA.
(At this time my bootloader was not yet unlocked nor was I rooted).
Again everything was fine UNTIL I installed the security patch update.
As soon as I installed and rebooted my sim read as invalid.
I rebooted, tried to mess with network settings, factory reset, etc.
Turning to Google, I realize this is a common issue with the Sprint variant of this device (of course my luck would be for me to unknowingly purchase the Sprint variant not knowing there was any issues) and the pie update.
The main fix for this issue would be of course to downgrade back to Android 8.
Here's my issues...
I unlock my bootloader.
Install the Android 8 firmware from the official Essential site. (made sure to install the one for Sprint variant).
Flash.
The touch screen is not functional. At all.
Flash back to Android Pie and install TWRP
Flash Android 8 custom ROM.
Touch screen still not functional.
So I'm back on Android Pie and touch screen is working, but sim is still invalid.
How are other essential users successful in downgrading the software?
HELP.

stephxo said:
Hello yall!
So I am at a complete loss on how to fix the issues with my Essential device.
So I decided to post here in as much detail as I can and hopefully receive some answers.
I purchased my phone used from eBay about a month ago.
According to the listing it was factory unlocked.
I have AT&T prepaid.
Everything was running smoothly for about a week until I receive the notification for the Android Pie OTA.
(At this time my bootloader was not yet unlocked nor was I rooted).
Again everything was fine UNTIL I installed the security patch update.
As soon as I installed and rebooted my sim read as invalid.
I rebooted, tried to mess with network settings, factory reset, etc.
Turning to Google, I realize this is a common issue with the Sprint variant of this device (of course my luck would be for me to unknowingly purchase the Sprint variant not knowing there was any issues) and the pie update.
The main fix for this issue would be of course to downgrade back to Android 8.
Here's my issues...
I unlock my bootloader.
Install the Android 8 firmware from the official Essential site. (made sure to install the one for Sprint variant).
Flash.
The touch screen is not functional. At all.
Flash back to Android Pie and install TWRP
Flash Android 8 custom ROM.
Touch screen still not functional.
So I'm back on Android Pie and touch screen is working, but sim is still invalid.
How are other essential users successful in downgrading the software?
HELP.
Click to expand...
Click to collapse
Go to the guide section and read the post that says uicc unlock there is a solution outlined.just follow it and your phone will be back in service

stephxo said:
Hello yall!
So I am at a complete loss on how to fix the issues with my Essential device.
So I decided to post here in as much detail as I can and hopefully receive some answers.
I purchased my phone used from eBay about a month ago.
According to the listing it was factory unlocked.
I have AT&T prepaid.
Everything was running smoothly for about a week until I receive the notification for the Android Pie OTA.
(At this time my bootloader was not yet unlocked nor was I rooted).
Again everything was fine UNTIL I installed the security patch update.
As soon as I installed and rebooted my sim read as invalid.
I rebooted, tried to mess with network settings, factory reset, etc.
Turning to Google, I realize this is a common issue with the Sprint variant of this device (of course my luck would be for me to unknowingly purchase the Sprint variant not knowing there was any issues) and the pie update.
The main fix for this issue would be of course to downgrade back to Android 8.
Here's my issues...
I unlock my bootloader.
Install the Android 8 firmware from the official Essential site. (made sure to install the one for Sprint variant).
Flash.
The touch screen is not functional. At all.
Flash back to Android Pie and install TWRP
Flash Android 8 custom ROM.
Touch screen still not functional.
So I'm back on Android Pie and touch screen is working, but sim is still invalid.
How are other essential users successful in downgrading the software?
HELP.
Click to expand...
Click to collapse
Did you unlock your critical partitions along with the bootloader?

arjunv said:
Go to the guide section and read the post that says uicc unlock there is a solution outlined.just follow it and your phone will be back in service
Click to expand...
Click to collapse
Do you think you could link that post for me? I can't seem to find it.
I also don't see any uicc option on my debice. (Not sure or that matters though)

If it's Sprint you need to wait 50 days before you can unlock it. CDMA phones are a pain in the ass to unlock, always buy International if possible!
This thread has some information that might be useful:
https://forum.xda-developers.com/essential-phone/help/unlock-sprint-version-t3720727
Sent from my PH-1 using XDA Labs

SuperBrolySSJ said:
Did you unlock your critical partitions along with the bootloader?
Click to expand...
Click to collapse
This is required for the touch screen firmware to be flashed and OP needs to see this.

Comprehensive guide and resources for migrating to a custom ROM from stock OREO?

Okay, so I've been trying to get some answers regarding custom ROMs for the past few days but I haven't even got one...and it seems I'm not the only one looking for them. So...lay it in this thread maybe we can start something up.
I am on stock OREO B04, phone's software has never been tampered with anything, TWRP, BL unlock and so on.
This is the premise of the thread, not only for me but for other users who find themselves in the same situation.
Oreo seems to be a bit of a hassle right now for migrating to custom ROMs, and this is not helped by the fact guides in the A7 section are all over the place as well, some may be outdated and there's no clear "Don't use this on x.x version" warning.
I am not even going to attempt to unlock the BL until I clear answer on wether it's possible or not. So let's start with this:
-Is it possible to unlock the BL on OREO?
-If not, what stock official ROM should we install in order to successfuly attempt to unlock the bl?
-Which guide or method is the best for doing so? I've found 2, one from 2016 on MM ROMs and one provided by TurkDevs that seems to work on some Nougat ROMs.
Then comes the recovery section:
-What TWRP should we install on a freshly unlocked device, the official releases, or the Nfound custom ones?
-Also, what are the prerequisites for installing TWRP...I hear that fastboot commands are gone since Nougat and that some flashing methods don't work, then I hear somehow you can do it by bringing back fastboot. How? There's only replies saying "type that command in fastboot" but nobody says if they had it or reinstalled it somehow.
Then comes the ROMs section:
-All custom ROMs seem to require a vendor partition as most if not all of them are Treble based. How do we get that to work?
- I am aware of the fact that the ROM threads have a prerequisites section, but none of them redirect you to a guide on how to get those prerequisites working. I understand that it's not the dev's responsability, I am not bashing anyone here, but a little bit of info cleaning and structuring should be in order in this section.
What I want for me and others in my situation is a clear answer on how to proceed, not a "flash this flash that". There's no secret that the A7 still has life in it especially with the new PIE ROMs.
I've recently seen a reply in one of the threads, encouraging the dev of one of this ROMs to not be disappointed by the seemingly low interest in PIE ROMs. I don't think there's a low interest in them, I think there are users that don't want to risk a bricked phone because of outdated guides and unlcear steps.
There's a lot of confusion going around here so I hope this thread will become a source of updated info on what's possible and what not. Thanks in advance!

Hi, I'm not the best person to help you with this since i've unlocked my Axon 7 a long time ago and I can't remember everything but I will try to help you based on my experience and on what I can remember.
Let's go
Starting with the bootloader, I unlocked mine on stock Nougat B09 using EDL Tool (Oreo wasn't even out when I unlocked my bootloader so I don't know if you can do it while running Oreo but just to be safe you should downgrade to Nougat)
It should be quite easy to unlock the bootloader, here's a simple step by step (please anyone correct me if I'm wrong)
- Download the EDL tool from the link above
- Downgrade your phone to Nougat (Using the updater on the phone itself or an EDL Package with EDL Tool or MiFlash - you can find the stock ROMs on @raystef66 's Download Center
- Once running Stock Nougat, turn on USB Debugging and Allow OEM Unlocking on Developer Settings
- Plug the phone to your computer and open EDL Tool (that should reboot the phone into EDL mode automatically)
- Navigate through the EDL Tool using the number keys on the keyboard, and it should be easy to find the Unlock Bootloader option. Unlock it and you should be done.
Once again that's the way I did it, I don't know if this is the easiest one available. You have more methods available like this one
Now onto the recovery situation, I think each developer recommends a specific TWRP version for their ROM's, like for example
@raystef66 likes NFound's TWRP 3.2.1-8 as you can see on his ROM's posts (check the first line in the installation guide)
@OrdenKrieger likes the official TWRP as you can see on Lineage OS 16.0 post
Generally, official TWRP should work just fine with any ROM.
On a recently unlocked Nougat Stock ROM, I recommend maybe an older version of TWRP, like 3.2.1 for example and you can flash it also using EDL Tool.
But when moving to Pie I recommend you use the latest TWRP version or the version that the ROM developer recommends. You probably know this but you can update your TWRP version by flashing it over the current version you have.
Now about the ROM's, the new ones have a Vendor partition so you have to create it when you're coming from Stock (because our Axon 7 doesn't support Project Treble) and to do that you can use @Oki 's PARTY Tool and after that you can flash the ROM normally, using the proper Bootstack and Modem files.
You could also try GSI's but I can't help you with that because I never tried them.
And this should be all.
I tried to keep it simple for now but i can help you further
I'm not the best person to guide you but at least I tried Feel free to ask me something and good luck!

@joaocandeias Well, dang it worked. Everything you described:
-going back to Nougat
-unlocking the bootloader with the EDL tool
-flashing TWRP-
creating the Vendor partition, and installing the new ROMs.
There were a few hiccups on the road, mostly driver related from my previous attempt, but nothing severe or something that would cause the device to brick.
I just installed @raystef66 's ResRemix ROM and it works fine. I'll start testing more of them in daily use and see which suits my needs best.
Thanks for the assistance!

TorqueSsS said:
@joaocandeias Well, dang it worked. Everything you described:
-going back to Nougat
-unlocking the bootloader with the EDL tool
-flashing TWRP-
creating the Vendor partition, and installing the new ROMs.
There were a few hiccups on the road, mostly driver related from my previous attempt, but nothing severe or something that would cause the device to brick.
I just installed @raystef66 's ResRemix ROM and it works fine. I'll start testing more of them in daily use and see which suits my needs best.
Thanks for the assistance!
Click to expand...
Click to collapse
I'm glad I could help
Since you're not the only person with questions on how to migrate from stock to custom, I'm thinking about writing a full post so more people can see it.
Btw what method did you use to downgrade to nougat?

@joaocandeias Sorry for the delayed response, I've got a really f'd up sleeping schedule these days. I'll write the exact steps I've done.
1. So, I first downloaded the B09 Nougat full stock ROM from the download center and tried to downgrade using the normal software updater in the phone (OTA window, local option).
It didn't work at first, I received a compatibility error, saying that the update is for "ailsa_ii" devices, while the device is not(or to be more exact, my device was " " ), which I found odd.
But, I thought that maybe I need the linked versions(like the last Nougat ROM before Oreo) so I downloaded the B10 Nougat ROM, and used the same procedure.
2. I set up the phone as a dud(skip everything, no Google account), turned USB debugging and OEM unlocking on, installed the original ZTE drivers straight from the phone and rebooted it into EDL to proceed with unlocking the BL.
At this point, I had the QUSB_BULK driver stick from my previous use of Zadig, so one quick "uninstall device software" and relpuging the phone go me the Qualcom 9008 driver in order.
3. I started the EDL tool, navigated through it and started the BL unlock procedure.
Once the phone rebooted I was greeted by the password screen.
One factory reset later and repeating the procedure greeted me with the "Bootloader unlocked" message. Sucess!
4.Now for TWRP, Vendor and ROM, got all the files onto the SD card, I flashedTWRP 3.2.1-8 NFound, then, from TWRP, I used the party tool, then flashed the UBv2(at which point it reverted TWRP to 3.2.3, flashed the 3.2.1-8 again with EDL ), modem, ROM, GApps, rebooted, set it up, then flashed Magisk...and everything seems fine.
The only issue I have now seems to be the camera, both stock app and GCam.
Open camera works , has the correct photo and video res, 60FPS doesn't work and the flash seems a bit laggy, but for me it's ok.
The DAC however is there, alive and kicking, Neutron detected the Hi-Res codec at launch and switched to it. It sounds the same as stock OREO to me so it is great, as this was my greatest fear when migrating to PIE. The DAC-AMP combo is like 60% of the reason I bought this phone in the first place.

TorqueSsS said:
@joaocandeias Sorry for the delayed response, I've got a really f'd up sleeping schedule these days. I'll write the exact steps I've done.
1. So, I first downloaded the B09 Nougat full stock ROM from the download center and tried to downgrade using the normal software updater in the phone (OTA window, local option).
It didn't work at first, I received a compatibility error, saying that the update is for "ailsa_ii" devices, while the device is not(or to be more exact, my device was " " ), which I found odd.
But, I thought that maybe I need the linked versions(like the last Nougat ROM before Oreo) so I downloaded the B10 Nougat ROM, and used the same procedure.
2. I set up the phone as a dud(skip everything, no Google account), turned USB debugging and OEM unlocking on, installed the original ZTE drivers straight from the phone and rebooted it into EDL to proceed with unlocking the BL.
At this point, I had the QUSB_BULK driver stick from my previous use of Zadig, so one quick "uninstall device software" and relpuging the phone go me the Qualcom 9008 driver in order.
3. I started the EDL tool, navigated through it and started the BL unlock procedure.
Once the phone rebooted I was greeted by the password screen.
One factory reset later and repeating the procedure greeted me with the "Bootloader unlocked" message. Sucess!
4.Now for TWRP, Vendor and ROM, got all the files onto the SD card, I flashedTWRP 3.2.1-8 NFound, then, from TWRP, I used the party tool, then flashed the UBv2(at which point it reverted TWRP to 3.2.3, flashed the 3.2.1-8 again with EDL ), modem, ROM, GApps, rebooted, set it up, then flashed Magisk...and everything seems fine.
The only issue I have now seems to be the camera, both stock app and GCam.
Open camera works , has the correct photo and video res, 60FPS doesn't work and the flash seems a bit laggy, but for me it's ok.
The DAC however is there, alive and kicking, Neutron detected the Hi-Res codec at launch and switched to it. It sounds the same as stock OREO to me so it is great, as this was my greatest fear when migrating to PIE. The DAC-AMP combo is like 60% of the reason I bought this phone in the first place.
Click to expand...
Click to collapse
Thanks! That will help me a lot to write a full guide. You'll be credited, don't worry
And yeah, when you migrate to custom roms you'll have to sacrifice camera quality and functionality and also a bit of speakers sound quality (all dolby atmos ports I tried are quite buggy and don't work well ; i only use atmos with the speakers). Headphones sound quality is great though.
If you don't use camera that much (not my case) and you're okay with the speakers sound quality then custom roms are probably the best option out there.

@joaocandeias
I was fully aware of the camera issues I might encounter, this has been the case with my old Mediatek devices when going to custom as well, same camera issues, but at least...it works here. Yeah, I lost some functionality, but to me it's a good trade-off. It can still take snaps and film properly so it's enough for me.
I am kind of going to miss Dolby on speakers (never liked it on headphones though), as it did a really good job for podcast style videos on YT, but it still sounds way better than a lot of phones without it so it's fine. I just need to crank the volume up a little more than usual.

I've heard that treble Pie Roms require a oreo bootloader, is this true? I am still confused how to install on my A2017G. In which order would I install bootloader and vendor partition?

bootloader says official?

does anyone know why the bootloader says the software is still official even though I am running havoc os a custom rom?

itcanbdone said:
does anyone know why the bootloader says the software is still official even though I am running havoc os a custom rom?
Click to expand...
Click to collapse
Maybe a glitch.

so, does yours say unofficial?
I ask cause when I unlocked my booloader and flashed twrp 3.1. something the stock rom wouldn't boot after I backed it up. its never seemingly behaved properly..
also, no matter what rom I put on the contacts up and delete themselves (i do not use cloud sync or gapps) and tge other issue accompanying is calls will drop on 1st second & 3rd rings when full signal present.
Did I miss a step?
I did developer options oem unlocking adb etc.
adb unlocked oem, then flashed twrp via adb/fastboot
then not working?