Hello everyone!
So; I have this " sm-j730f " that's had an frp problem. After flashing it with the firmware mentioned in the recovery mode "J730FXWS3ARI7" it gave a "Device does not have DRK, please install DRK first" message on a blue screen. then it opened the recovery mode page with this on the bottom of the screen:
No Support SINGLE-SKU
Supported API: 3
dm-verity error ...
failed code : 0×02
E: failed to find /misc partition
--------------------------------------------
I did some searching, and a "CF-auto root" was suggested, but while trying to flash it, I got this message "Blocked by FRP lock"
Thanks in advance !
HiSham1d2 said:
Hello everyone!
So; I have this " sm-j730f " that's had an frp problem. After flashing it with the firmware mentioned in the recovery mode "J730FXWS3ARI7" it gave a "Device does not have DRK, please install DRK first" message on a blue screen. then it opened the recovery mode page with this on the bottom of the screen:
No Support SINGLE-SKU
Supported API: 3
dm-verity error ...
failed code : 0×02
E: failed to find /misc partition
--------------------------------------------
I did some searching, and a "CF-auto root" was suggested, but while trying to flash it, I got this message "Blocked by FRP lock"
Thanks in advance !
Click to expand...
Click to collapse
what is DRK?
HiSham1d2 said:
Hello everyone!
So; I have this " sm-j730f " that's had an frp problem. After flashing it with the firmware mentioned in the recovery mode "J730FXWS3ARI7" it gave a "Device does not have DRK, please install DRK first" message on a blue screen. then it opened the recovery mode page with this on the bottom of the screen:
No Support SINGLE-SKU
Supported API: 3
dm-verity error ...
failed code : 0×02
E: failed to find /misc partition
--------------------------------------------
I did some searching, and a "CF-auto root" was suggested, but while trying to flash it, I got this message "Blocked by FRP lock"
Thanks in advance !
Click to expand...
Click to collapse
Just flash the firmware intended for your region.
Thanks for the reply @ashyx
I can't really tell what region the phone was originally made for.
It has a "UK" address on the back along w/ the sn, the imeis etc.
And the recovery shows a "Mid Iraqi" firmware version which I flashed, as I mentioned in the question.
So, is there a way to know the region? And if it's the UK, I don't seem to find a firmware for it.
HiSham1d2 said:
Thanks for the reply @ashyx
I can't really tell what region the phone was originally made for.
It has a "UK" address on the back along w/ the sn, the imeis etc.
And the recovery shows a "Mid Iraqi" firmware version which I flashed, as I mentioned in the question.
So, is there a way to know the region? And if it's the UK, I don't seem to find a firmware for it.
Click to expand...
Click to collapse
You need a BTU firmware if it's UK.
ashyx said:
You need a BTU firmware if it's UK.
Click to expand...
Click to collapse
Thanks for the info. I'll try a btu firmware.
HiSham1d2 said:
Thanks for the info. I'll try a btu firmware.
Click to expand...
Click to collapse
If UK is not available try France (XEF)
https://updato.com/firmware-archive-select-model?record=D6A8C6360B8411E99F15FA163EE8F90B
ashyx said:
If UK is not available try France (XEF)
https://updato.com/firmware-archive-select-model?record=D6A8C6360B8411E99F15FA163EE8F90B
Click to expand...
Click to collapse
Sorry for the late reply; I had urgent matters to tend to.
Indeed, no UK firmware was available, so tried the french one, and even an Iraqi Oreo firmware, but flashing them was too fast ( It only took 2 seconds) which of course didn't affect the phone in the slightest. Even though it wrote "pass" in Odin.
So, I thought I'd try a different version of Odin, but nothing seems to be moving in Odin 3.0.7!
HiSham1d2 said:
Sorry for the late reply; I had urgent matters to tend to.
Indeed, no UK firmware was available, so tried the french one, and even an Iraqi Oreo firmware, but flashing them was too fast ( It only took 2 seconds) which of course didn't affect the phone in the slightest. Even though it wrote "pass" in Odin.
So, I thought I'd try a different version of Odin, but nothing seems to be moving in Odin 3.0.7!
Click to expand...
Click to collapse
3.0.7? You need the latest version 3.13.1
My bad !
I Flashed the french firmware successfully with Odin 3.13.1
And now the phone is in a loop (Installing system update --> No command --> Reboot)
ashyx said:
3.0.7? You need the latest version 3.13.1
Click to expand...
Click to collapse
I was messing around with the "no command" page. The combination (power key + vol up) opens up some sort of a log, where it states that the phone has no "recovery file/ directory".
Tried to flash a twrp recovery, but I still get the message "blocked by FRP lock"
Should I look for a stock recovery?
HiSham1d2 said:
I was messing around with the "no command" page. The combination (power key + vol up) opens up some sort of a log, where it states that the phone has no "recovery file/ directory".
Tried to flash a twrp recovery, but I still get the message "blocked by FRP lock"
Should I look for a stock recovery?
Click to expand...
Click to collapse
The stock recovery is provided with the stock firmware and should install with the rest of the firmware.
You can download an odin flashable recovery below.
Ensure it matches the firmware.
https://desktop.firmware.mobi/device:1703
ashyx said:
The stock recovery is provided with the stock firmware and should install with the rest of the firmware.
Click to expand...
Click to collapse
I know that; but apparently this stupid phone doesn't lol
I'm going crazy over here.
And just to exhaust my options, can you kindly provide me with a recovery.tar file or link? I don't seem to find it anywhere.
HiSham1d2 said:
I know that; but apparently this stupid phone doesn't lol
I'm going crazy over here.
And just to exhaust my options, can you kindly provide me with a recovery.tar file or link? I don't seem to find it anywhere.
Click to expand...
Click to collapse
See above.
ashyx said:
The stock recovery is provided with the stock firmware and should install with the rest of the firmware.
You can download an odin flashable recovery below.
Ensure it matches the firmware.
https://desktop.firmware.mobi/device:1703
Click to expand...
Click to collapse
Used the right one, but it's still the same.
Here is the page I mentioned earlier:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HiSham1d2 said:
Used the right one, but it's still the same.
Here is the page I mentioned earlier:
Click to expand...
Click to collapse
Can you post a screenshot of download mode?
It reads:
Odin mode
Download speed: fast
Product name: sm-j730
Current binary: samsung official
System status: custom
FRP Lock: on
OEM lock: on
Secure download: enabled
Warranty void = 1 (0×030f)
RP SWrev: B : 3 K : 1 S : 1
HiSham1d2 said:
It reads:
Odin mode
Download speed: fast
Product name: sm-j730
Current binary: samsung official
System status: custom
FRP Lock: on
OEM lock: on
Secure download: enabled
Warranty void = 1 (0×030f)
RP SWrev: B : 3 K : 1 S : 1
Click to expand...
Click to collapse
Your device is still showing 'custom' status.
I suggest re-installing the stock firmware and factory reset.
It should state 'official'
ashyx said:
Your device is still showing 'custom' status.
I suggest re-installing the stock firmware and factory reset.
It should state 'official'
Click to expand...
Click to collapse
Tried it twice, and it's still stating a 'custom' status.
Is there a way to downgrade it to Nougat? Cuz it seems this is a common thing with Oreo. (Losing the stock factory I mean).
HiSham1d2 said:
Tried it twice, and it's still stating a 'custom' status.
Is there a way to downgrade it to Nougat? Cuz it seems this is a common thing with Oreo. (Losing the stock factory I mean).
Click to expand...
Click to collapse
What is the current firmware build you have installed?
Related
TWRP -- CUSTOM ROOTABLE KERNEL -- ROOT NOW AVAILABLE FOR THE BLU STUDIO 5.0 LTE (Y530Q)!!!!!
After a lot of work, trial and error, I now have a method available to install TWRP on this phone and root it easily.
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS:
Download the files linked at the bottom of this post.
Connect your phone to your computer by USB, and copy the file "UPDATE-SuperSU-v2.46.zip" onto your phone's SD card.
Put your phone into fastboot mode, and connect it to your computer.
Type the command "fastboot flash recovery twrp-unofficial-blu-studio-5-lte.img" and press "Enter"
Type the command "fastboot flash boot boot-blu-studio-5-lte-modified-rootable-kernel.img" and press "Enter"
Using the keys on your phone, press & hold the "Volume Up" & "Power" keys until the "BLU" logo appears, then release the keys. TWRP should come up in a few seconds.
Using the "Install" option in TWRP, flash the file "UPDATE-SuperSU-v2.46.zip". Once it finishes, clear the cache and reboot normally.
Your Blu Studio 5.0 LTE should now has a TWRP custom recovery, is rooted, and you can install any custom ROM you can find just like on any other phone.
JUST MAKE SURE THAT THE ROM YOU FLASH IN TWRP IS FOR THIS PHONE!!!!! I WILL NOT BE RESPONSIBLE FOR ANY BRICKED DEVICES!!!!
DOWNLOAD LINKS:
UPDATE-SuperSU-v2.46.zip ---> https://www.androidfilehost.com/?fid=24052804347825047
Custom Kernel -----> https://www.androidfilehost.com/?fid=24052804347825046
TWRP Recovery -----> https://www.androidfilehost.com/?fid=24052804347825041
Hi budding_developer
Do you have a backup of original boot and recovery partition.
I've got a boot loop after flashing this files.
Can't access recovery either, just fastboot mode.
Thanks in advance.
Can someone confirm this works?
this method work however i am unable to find a compatible custom rom. i tried flashing miui_ktouch3_4.12.5_4.4.zip but it failed recovery told me its not a blu rom
kaodie20 said:
this method work however i am unable to find a compatible custom rom. i tried flashing miui_ktouch3_4.12.5_4.4.zip but it failed recovery told me its not a blu rom
Click to expand...
Click to collapse
cause that rom is corrupt, NON-HLOS.bin, rpm.mbn, sbl1.mbn, sdi.mbn, 8926_msimage.mbn, pacht0.xml files no present in that rom, im working to fix the rom. now i have a backup from twrp maybe can help u. Sorry my English
FIXING THE ROM
https://mega.nz/#F!MRA1gIqR!Ech09f9dgkBoa8mqTcigCQ
Help
I followed the instruccions
and I got to install everything right, except I couldnt install any Custom Roms using TWDP so I reverted to a backup but now the phone has a lot of problems, the wifi and bluetooth wont work plus alot of apps stop working, and the camara wont save pictures.
Should I flash the factory image back? if so can anyone help me find the link? the page at blu-dev com/factory-images-recovery doesnt have it, theyre link is down
or
Should I try installing the factory rom?
Any help is apretiated
blu studio 5.0 hd lte y534q
died boot RELINK HS-USB QDLoader 9008
killerfast said:
cause that rom is corrupt, NON-HLOS.bin, rpm.mbn, sbl1.mbn, sdi.mbn, 8926_msimage.mbn, pacht0.xml files no present in that rom, im working to fix the rom. now i have a backup from twrp maybe can help u. Sorry my English
FIXING THE ROM
https://mega.nz/#F!MRA1gIqR!Ech09f9dgkBoa8mqTcigCQ
Click to expand...
Click to collapse
hi
the link is dead i got the bootloop to and try many roms but non of them working
please give a link and thank you .
hello friends, someone already has installed the TWRP? to make a backup of the current ROM y530q and pass me please would greatly appreciate it !!
Hi, my problem is serious. I'm from Costa Rica and I have a phone BLU Studio 5.0 HD Y530Q with Qualcomm processor and wanted flashearle a custom recovery ( TWRP ) which I saw and get a espesifico tutorial for that device , and the comments they ran all but my for error " load files " that is by ADB FlashBoot . Then I looked for a ROM stock for instalarsela from Qualfast and everything do well , the roms are those of the device ( which got like 3 different forums) and flashes from the fastboot mode and using Qualfast correctly ... But not start the device ( SSB stays as when an unmatched ROM is installed ) and I have flashed 3 roms and does not work ! I do everything correctly but does not work . I 'm desperate and do not know what else I need help urgently the phone is my father hehe. Please if I offer your help please .
Darkjason said:
Hi, my problem is serious. I'm from Costa Rica and I have a phone BLU Studio 5.0 HD Y530Q with Qualcomm processor and wanted flashearle a custom recovery ( TWRP ) which I saw and get a espesifico tutorial for that device , and the comments they ran all but my for error " load files " that is by ADB FlashBoot . Then I looked for a ROM stock for instalarsela from Qualfast and everything do well , the roms are those of the device ( which got like 3 different forums) and flashes from the fastboot mode and using Qualfast correctly ... But not start the device ( SSB stays as when an unmatched ROM is installed ) and I have flashed 3 roms and does not work ! I do everything correctly but does not work . I 'm desperate and do not know what else I need help urgently the phone is my father hehe. Please if I offer your help please .
Click to expand...
Click to collapse
I had the same problem (well, have, but I changed my device) and I'm from Costa Rica too. Unfortunately there's not solution, because any of the roms out there for this device work.
Mine is briked since months.
Sorry for give you the bad news, but that's the problem with Blu phones.
Hello, i am from Costa Rica too, i have a rom for this device, but i need a backup from the baseband and the modem (kolbi), write me here and maybe i put in contact to you to make a good rom.
Can anyone point me towards the blu 5.5 version please already rooted with gay ass king roots b.s. bc my p.c. is down and I'm lazy af anymore but yeah wud love to make a recovery point for this phone before I boot loop the fckr thxxxx
Hi everyone! I want to say thanks for all the great info you provide in these forums! You have helped me root many devices successfully. This is my first time posting a thread here, and I hope someone can help me. Here goes...
I have the Samsung Galaxy Grand Prime U.S. Cellular (SM-G530R4) that I am trying very hard to root. I tried King Root, which said it could root my device, but after doing so the first restart of the device resulted in a soft bring with big message saying Custom Binary Blocked by FRP Lock. I've done hours of research and that seems to be common problem. So I downloaded and Flashed Stock firmware back to the device successfully. I did more research on rooting my phone and all I can find for other methods is CF Autoroot. Typically this works well for me, but on this phone it is not. Here is whats happening when I try to flash CF Autoroot -
I enabled USB Debugging, restart my phone in download mode and connect to USB. In Odin I select PDA and select the CF Autoroot TAR file. Click on Start. Odin reports: File analysis-success, setupconnection, initialization, Get PIT for mapping, firmware update start, singledownload, recovery.img, NAND write start, FAIL! complete(write) operation failed.
At this point I look at the phone which on the download screen reports: Product Name-SM-G530R4, Current Binary-Samsung Official, System Status-Official, FRP Lock- On, Knox Warranty Void- 0x0, Qualcom Secure Boot- Enable (CSB), AP SWREC: S1 T1 H1 R1 A1 P1, Secure Download-Enable, CUSTOM BINARY(RECOVERY) BLOCKED BY FRP LOCK. (Note that when trying to flash CF Autoroot, the FRP lock message includes "Recovery" where as when the device was already rooted with King Root and then restarted, the message did not contain the "Recovery" but was otherwise identical and stand alone in BIG letters. With the device already rooted by King Root, FRP Lock actually bricked the device. But when trying to root with CF Autoroot, FRP lock only blocked the flashing and I am able to restart the device and load up as if nothing ever happened. I really want to root my phone, but I need your help to make FRP Lock allow flashing the custom binary, and to do so without soft bricking it!! Ive seen a lot of people with the problem of FRP Lock softbricking their phones, but I can't find anything at all on FRP Lock stopping you from even flashing the custom binary. Thank you in advance for any help you can offer!
P.S. If its of any importance The device is US Cellular SM-G530R4 - Android 5.1.1 - Baseband Version G530R4TYU1AOL2 [This is the newest Update] - Build Number LMY47X.G530R4TYU1AOL2
njturner84 said:
Hi everyone! I want to say thanks for all the great info you provide in these forums! You have helped me root many devices successfully. This is my first time posting a thread here, and I hope someone can help me. Here goes...
I have the Samsung Galaxy Grand Prime U.S. Cellular (SM-G530R4) that I am trying very hard to root. I tried King Root, which said it could root my device, but after doing so the first restart of the device resulted in a soft bring with big message saying Custom Binary Blocked by FRP Lock. I've done hours of research and that seems to be common problem. So I downloaded and Flashed Stock firmware back to the device successfully. I did more research on rooting my phone and all I can find for other methods is CF Autoroot. Typically this works well for me, but on this phone it is not. Here is whats happening when I try to flash CF Autoroot -
I enabled USB Debugging, restart my phone in download mode and connect to USB. In Odin I select PDA and select the CF Autoroot TAR file. Click on Start. Odin reports: File analysis-success, setupconnection, initialization, Get PIT for mapping, firmware update start, singledownload, recovery.img, NAND write start, FAIL! complete(write) operation failed.
At this point I look at the phone which on the download screen reports: Product Name-SM-G530R4, Current Binary-Samsung Official, System Status-Official, FRP Lock- On, Knox Warranty Void- 0x0, Qualcom Secure Boot- Enable (CSB), AP SWREC: S1 T1 H1 R1 A1 P1, Secure Download-Enable, CUSTOM BINARY(RECOVERY) BLOCKED BY FRP LOCK. (Note that when trying to flash CF Autoroot, the FRP lock message includes "Recovery" where as when the device was already rooted with King Root and then restarted, the message did not contain the "Recovery" but was otherwise identical and stand alone in BIG letters. With the device already rooted by King Root, FRP Lock actually bricked the device. But when trying to root with CF Autoroot, FRP lock only blocked the flashing and I am able to restart the device and load up as if nothing ever happened. I really want to root my phone, but I need your help to make FRP Lock allow flashing the custom binary, and to do so without soft bricking it!! Ive seen a lot of people with the problem of FRP Lock softbricking their phones, but I can't find anything at all on FRP Lock stopping you from even flashing the custom binary. Thank you in advance for any help you can offer!
P.S. If its of any importance The device is US Cellular SM-G530R4 - Android 5.1.1 - Baseband Version G530R4TYU1AOL2 [This is the newest Update] - Build Number LMY47X.G530R4TYU1AOL2
Click to expand...
Click to collapse
I have two SM-G531's, and this SuperUser works on LP 5.1.1, also works with the SM-G531F..I'm not familiar with your variant, but give this a try, flash this file via TWRP recovery, then do a normal boot..(will NOT work with stock recovery)..
Here >> https://drive.google.com/file/d/0Bzr_08QESKW4Um1LSzdNM1JONTg/view?usp=drivesdk
Thing is, I don't know if TWRP is available for your variant, do a search for any 530 variant and give it a try..the 531 variant (I'm pretty sure) uses a different CPU than the 530, which is very important with a custom recovery..maybe CWM offers a recovery for your variant, I say TWRP because it's the only recovery I use..
One would flash a custom recovery (TWRP or CWM) via Odin3 on a PC..be sure and have "No reboot" checked on left column in Odin3, then after recovery flash, while device is idle in "Download mode" unplug from PC, then pull the battery..with device OFF, then boot to recovery (the normal way) via the three button press, the device will boot to the custom recovery, then with the SuperUser file I supplied, via "storage" or the SD Card, one would flash via the (Install) button in TWRP..then boot normally..
TIP: If the device is not turned off after a custom recovery flash, the custom recovery flash will not stick and the device will revert to stock recovery..device MUST be turned OFF then booted to the custom recovery that was just flashed..
I'm sorry if I offend with my explanation, not sure of your understanding level of all this..lol
SM-N910C Gold Note 4 (MM 6.0.1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be sure and have "Manufacturer unlock" activated in "Developer options" also..
SM-G531M (LP 5.1.1)
P.S.
If you continue having FRP issues..which you shouldn't, BUT..if you do..here is a zip file I worked up for my personal use..unzip this file to your PC somewhere, included in this zip, is a MS Word (.doc) file for instructions..in this instruction sheet, replace OTG with SD Card instead, you'll copy the (.apk) file to your device SD Card or storage, then install the apk included..I do most of my flashing via OTG instead..
Here >> https://drive.google.com/file/d/0Bzr_08QESKW4dWp0Wlo5RUMtN28/view?usp=drivesdk
Do this ONLY if you keep getting the FRP issue..
I hope all this helps you reach your goal..
SM-N910C Gold Note 4 (MM 6.0.1)
Just Delete your google account for disable frp lock... then flash via odin for root your phone. Hope This will work... ☺
root grand prime g531h
hi guys i have a grand prime g531h 5.1.1 i tryed to root it many times
and i used all tutoriels to do that but i did not succed
i tryed the "twrp_supersu_sm-g531h" and the "CF-Auto-Root-grandprimeve3g" but
i did not succed
to day i found a new way by chance and it worked with me
1- boot into download mode
2- try to flash the "twrp_supersu_sm-g531h"
3- reboot again in dowload mode
4- flash the "CF-Auto-Root-grandprimeve3g-grandprimeve3gxx-smg531h.tar"
here the phone won't boot and it will ask you to use kies
don't worry and pull out the batteri and put it back and then boot again
into download mode
5- flash again the "twrp_supersu_sm-g531h"
your phone go back to life go in download mode you will see that your statu is custom
now
6-reboot in reconvery mode and you will get the twrp slide the arow an start
you are rooted
need:
1:twrp_supersu_sm-g531h
the link: http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-g531h-root-t3317382
2:CF-Auto-Root-grandprimeve3g-grandprimeve3gxx-smg531h.tar
the link:https://download.chainfire.eu/776/C...-grandprimeve3gxx-smg531h.zip?retrieve_file=1
Would this work with a Galaxy Prime Grand G530T? I'm having problems rooting that device.
Thanks1
noeman said:
hi guys i have a grand prime g531h 5.1.1 i tryed to root it many times
and i used all tutoriels to do that but i did not succed
i tryed the "twrp_supersu_sm-g531h" and the "CF-Auto-Root-grandprimeve3g" but
i did not succed
to day i found a new way by chance and it worked with me
1- boot into download mode
2- try to flash the "twrp_supersu_sm-g531h"
3- reboot again in dowload mode
4- flash the "CF-Auto-Root-grandprimeve3g-grandprimeve3gxx-smg531h.tar"
here the phone won't boot and it will ask you to use kies
don't worry and pull out the batteri and put it back and then boot again
into download mode
5- flash again the "twrp_supersu_sm-g531h"
your phone go back to life go in download mode you will see that your statu is custom
now
6-reboot in reconvery mode and you will get the twrp slide the arow an start
you are rooted
need:
1:twrp_supersu_sm-g531h
the link: http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-g531h-root-t3317382
2:CF-Auto-Root-grandprimeve3g-grandprimeve3gxx-smg531h.tar
the link:https://download.chainfire.eu/776/C...-grandprimeve3gxx-smg531h.zip?retrieve_file=1
Click to expand...
Click to collapse
Hello everyone. :good:
I will try to be brief...
I have a J5 model SM-J500M/DS with Custom binary blocked by FRP (lock: on)
The problem is:
After flash firmware using both Odin/Z3X Pro, the message screen "Custom binary blocked by FRP" still there.
1 - I tried all versions of stock roms from: sammobile (android 5.1, 6.0), SamFirm (last firmware).
2 - I tried separated firmware repair files (BL, CP, CSC, etc..)
3 - KIES and Smart Switch same alert that SM-J500M does not have support for initialization emergency:
Is there another way to turn FRP off? :crying:
Take a look the screens below:
Thank you :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the log screen on both Odin and Z3X:
Using repair firmware with separated files
Using stock rom from Sammobile
Z3X with individual files
Z3X with stock from Sammobile
leodavi3d said:
Hello everyone. :good:
I will try to be brief...
I have a J5 model SM-J500M/DS with Custom binary blocked by FRP (lock: on)
The problem is:
After flash firmware using both Odin/Z3X Pro, the message screen "Custom binary blocked by FRP" still there.
1 - I tried all versions of stock roms from: sammobile (android 5.1, 6.0), SamFirm (last firmware).
2 - I tried separated firmware repair files (BL, CP, CSC, etc..)
3 - KIES and Smart Switch same alert that SM-J500M does not have support for initialization emergency:
Is there another way to turn FRP off? :crying:
Take a look the screens below:
Thank you :good:
This is the log screen on both Odin and Z3X:
Using repair firmware with separated files
Using stock rom from Sammobile
Z3X with individual files
Z3X with stock from Sammobile
Click to expand...
Click to collapse
Just solved this kind of problem yesterday download lastest Odin and lastest rom which is available for ur device .u have to uninstall Kies and smart switch they would be a trouble while working with Odin so u should uninstall them first then press volume down +power button +home button it would take u to download mode then connect ur device to PC.if Odin detects ur device then press AP in Odin and load the rom to Odin then start flashing .if the phone got into a boot loop repeat the process again and re flash the rom .it would work I had a sm-j500f which I solved with the same process .I hope it would work for u too
mjhonny14377 said:
Just solved this kind of problem yesterday download lastest Odin and lastest rom which is available for ur device .u have to uninstall Kies and smart switch they would be a trouble while working with Odin so u should uninstall them first then press volume down +power button +home button it would take u to download mode then connect ur device to PC.if Odin detects ur device then press AP in Odin and load the rom to Odin then start flashing .if the phone got into a boot loop repeat the process again and re flash the rom .it would work I had a sm-j500f which I solved with the same process .I hope it would work for u too
Click to expand...
Click to collapse
Sure mate, KIES was the last attempt...After to try with ODIN and Z3X pro.
I uninstalled KIES but.... Both programs ODIN and Z3X pro have success instalation but FRP block still there...
Why dont u turn off frp in stock first then onpy procced to switch rom? I unlock my frp easily using few method i found in youtube. I hope it help you.. good day mate
I bought this device from a fleamarket and have the following issues :
It was (still is) FRP locked (Android 5.1.1) so I flashed the Combination ROM (COMBINATION_FA51_G928FXXU4ARA1.zip ), realizing, adb commands from "FRP_Techeligible.bat" wont work:
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
The Combination ROM worked just fine.
My fault, the combination ROM was for 7.x.x.
But why doesnt it work anymore ? Bootloader incompatibilities ?
I started ODIN.
So I went for the 7.0 Stock ROM (Vodafone), ending up with the "modem.bin FAIL!" in Odin.
Also I have no idea if its vodafone branded.
I renamed "hidden.img" to "hidden.img.tar" and flashed it seperately. But it did not help.
It goes to recovery and says "No Support SINGLE-SKU", Supported API:3, dm-veritfy error... failed code: 0x02"
Flashing the Combination ROM failed afterwards.
In Recovery I do now see Android 7.0 (G928FXXS5CRH1), but I get the 0x02 Verity Error on top of it.
Wiping doesnt help anymore it seems.
It will only boot into recovery and I can still enter download mode.
So I wanted to try Android 6.0.1 ROM...but it fails after "cache.img."
SYSTEM REV. CHECK FAIL- DEVICE:1, BINARY:0
So I wanted to try Android 7.0.0 ROM again...but it fails at once.
SYSTEM REV. CHECK FAIL- DEVICE:5, BINARY:4
After rebooting (device:5 binary4) I can flash the 7.0.0 ROM again, until it comes to the "modem.bin FAIL! message again...
What have I done ? :crying:
I googled for hours today and read into so many "ideas" and "solutions"...but none of them helped.
Wish I would have stayed in the Combination ROM.:silly:
Knox is still 0x0
Is there any chance to revive this device ?
Like, flash TWRP...or a custom ROM...but how, if I can only get Download Mode and Recovery and get a:
Custom Binary(RECOVERY) Blocked By FRP Lock
Kies and "Smart Switch" Software wont recognize the device.
adb wont enlist it. (anymore). Worked with combination ROM.
Odin recognizes it on com port, starts flashing, then fails.
also read using ODIN with mixed 6.x.x and 7.x.x files coudl get me "back" the old bootloader...but I gave up now and dont want to waste another day, if its useless.
I did now flash the "4 part firmware" (AP, BL, CP, CSC) G928FXXS5CRH1 (unbranded).
The download I did via the tool "samfirm" use chk32 and decrypt on downloading !
"SM-G928F_1_20180828170540_5avji4munw_fac"
ODIN worked and the phone is back booting to "An blabla attempt..." aka. FRP lock.
Booting into Recovery it now says :
"Installing system" followed by "No command"
then shows :
7.0 (G928FXXS5CRH1)
Successfully verify for dmverity hash tree
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-adb still does not enlist it as device
-A reboot from "Download Mode" ends up in the Recovery Mode once
On the next reboot its back to "normal"
-Kies says please use SmartSwitch...and SmartSwitch says "USB file transfer not allowed"
So I guess its time for the 7.x.x combination ROM again...jesus...it fails in ODIN and ends up in
"E:failed to mount /cache...recovery"...blaaahhh
on boot....
Flashing "7.0 (G928FXXS5CRH1)" in 4 parts again. So, deadend ?
As I could NOT enter Recovery anymore, I couldnt wipe cache and do a factory reset....
But no, I cant flash the COMBINATION ROM anymore..........................ODIN keeps failing.
Ok, I decied to try to downgrade from 7.0 to 6.0.1, so I can use the FRP bypass again.
But where would I find a debranded 6.01 for SM-G928F in 4 parts (BL, AP, CP, CSC)
I found a ROM, takes ages to download...good night...more tomorrow...
Update :
After much googling, stumbling across tons of trojan tools by indian people, many videos that always wants you to buy a "Box" from amazon...I tried the non adviced downgrading to Android 6.0.1.
It only worked with a 4 part flash file + ODIN (I didnt even use the PIT file, as it was supposed to be) and Im now at :
6.0.1/MMB29K.G928FXXXS3BQA7 (it flashes just fine with and without the PIT file)
No verity error, no Knox triggered.
The next step was to flash the modem of 7.0 (AP), to be able to get connected to the network again.
It worked as well.
The phone still had FRP lock, so I used the "call method" to get into a SMS, send a link, open link, surf to google account manager 6 and frp.apk, done.
Hello,
So i did follow all the instructions given on xda, but the issue is after the boot.img is flashed the phone has a blue screen and say Security error.....
And at the top of the screen a red text : Secure check fail boot.img
Please help me i did try to fix this for 2 days now.
kralledes said:
Hello,
So i did follow all the instructions given on xda, but the issue is after the boot.img is flashed the phone has a blue screen and say Security error.....
And at the top of the screen a red text : Secure check fail boot.img
Please help me i did try to fix this for 2 days now.
Click to expand...
Click to collapse
Did you follow these instructions?
https://forum.xda-developers.com/galaxy-a20/how-to/root-samsung-galaxy-a20-rooting-guide-t3954872
Yes, at least 5 times, it work, until this error comes up, seems to flash it, and then it just show this error..
kralledes said:
Yes, at least 5 times, it work, until this error comes up, seems to flash it, and then it just show this error..
Click to expand...
Click to collapse
Flash boot.tar from Odin
Flash boot.img from linux
I did flash it via odin, that step works fine, then the phone reboots, and i can even enter recovery, but if i try to reboot to normal stage, it drop me the error on the phone screen :/..
kralledes said:
Yes, at least 5 times, it work, until this error comes up, seems to flash it, and then it just show this error..
Click to expand...
Click to collapse
Flash the vbmeta in the If Something goes Wrong section
it say to flash this for magisk error, but i can not get even that far, since the phone will NOT boot anymore, only to recovery that's it.
Let me try to explain what it did :
It works until the step where you need to wipe the data, if done, the phone boots up and then on the phone screen it see a blue backgroudn and it says it has been flashed and need to contact support bla bla... and on the TOP of the screen it say : security check fail : BOOT.IMG
see error :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kralledes said:
see error :
Click to expand...
Click to collapse
23. select bootloader
24. Select factory reset to wipe data
25. Restart phone
Did you select factory reset
you mean after booting i shall select bootloader?
But then is no options anymore, just this download mod!?
I did wipe/reset yes..
I have the Android recovery screen, i then select wipe data/factory.
Then it reebots and this errors comes up
kralledes said:
Hello,
So i did follow all the instructions given on xda, but the issue is after the boot.img is flashed the phone has a blue screen and say Security error.....
And at the top of the screen a red text : Secure check fail boot.img
Please help me i did try to fix this for 2 days now.
Click to expand...
Click to collapse
Hello , have you fixed if yet?
If not i would suggest you this vidéo that i did
https:// youtu.be/8FnNIoP1tSA
Follow all thé steps and you will have a rooted device with twrp,
But bé careful all thé data will bé erased!!
If you dont want Root , you Can Always install just thé stock firmware, Use thé download links on thé vidéo ,
If you dont know what software to choose, it doesent matter thé country or thé (AFXXU6ASL),
Just use thé firmware that has thé date thé latest (and you wont have FAIL in Odin, that happens bécause thé bootloader doesent allow firmware older than thé one that is installed)
Imyou said:
Hello , have you fixed if yet?
If not i would suggest you this vidéo that i did
https:// youtu.be/8FnNIoP1tSA
Follow all thé steps and you will have a rooted device with twrp,
But bé careful all thé data will bé erased!!
If you dont want Root , you Can Always install just thé stock firmware, Use thé download links on thé vidéo ,
If you dont know what software to choose, it doesent matter thé country or thé (AFXXU6ASL),
Just use thé firmware that has thé date thé latest (and you wont have FAIL in Odin, that happens bécause thé bootloader doesent allow firmware older than thé one that is installed)
Click to expand...
Click to collapse
The twrp in your video is for a205
This error is in a207
---------- Post added at 08:06 PM ---------- Previous post was at 07:58 PM ----------
kralledes said:
I have the Android recovery screen, i then select wipe data/factory.
Then it reebots and this errors comes up
Click to expand...
Click to collapse
Did you download the correct a207 firmware before you extracted the stock boot.img
Well like i said the flashing goes well NO error in ODIN!, the only error is on the phone when i try to reboot to stock!
kralledes said:
Well like i said the flashing goes well NO error in ODIN!, the only error is on the phone when i try to reboot to stock!
Click to expand...
Click to collapse
What firmware number did you download?
BL_A207FXXS2ASL7_CL17088050_QB28282616_REV00_user_low_ship_MULTI_CERT.tar
the error is not in odin, it say pass, just when i try to wipe and reboot , it show me an erorr about boot.img on the phone screen
kralledes said:
the error is not in odin, it say pass, just when i try to wipe and reboot , it show me an erorr about boot.img on the phone screen
Click to expand...
Click to collapse
Yes. I understand this.
What happens when you flash the stock boot.tar
Odin say pass, then i go to recovery. Then wipe, then the error aboit boot.img