Related
my screen shows blank after the huawei/android screen my model is a l23 with stock recovery
Can we have more info..? Root/no root, xposed, ROM, what did you do..
Potato997 said:
Can we have more info..? Root/no root, xposed, ROM, what did you do..
Click to expand...
Click to collapse
no root bootloader locked ,stock rom and the phone cant come off its on with just the back light ,had just flash back stock through recovery when that happened , thanks for the reply
Try to download the firmware and put the update.app in the dload folder and flash it trought the three buttons
Potato997 said:
Try to download the firmware and put the update.app in the dload folder and flash it trought the three buttons
Click to expand...
Click to collapse
tried that and nothing , think ill just carry the phone in
beenie2703 said:
no root bootloader locked ,stock rom
Click to expand...
Click to collapse
Pretty much sounds like a hardware issue.
I tried to relock my bootloader I downloaded the latest update took the update file out of the folder. And then put it in folder in SD card in folder named DL. Put in code in dialer to get into sd update and keep getting no update file on sd also tried in internal storage.
I am selling phone so just want to get rid of unlock boot message. Any suggestions people ?
stevegtrlmk said:
I tried to relock my bootloader I downloaded the latest update took the update file out of the folder. And then put it in folder in SD card in folder named DL. Put in code in dialer to get into sd update and keep getting no update file on sd also tried in internal storage.
I am selling phone so just want to get rid of unlock boot message. Any suggestions people ?
Click to expand...
Click to collapse
Flash stock with twrp
Sent from my Huawei P9 Lite using XDA Labs
Dankmeme said:
Flash stock with twrp
Click to expand...
Click to collapse
I flashed 161 with twrp and still comes up that this phone unsafe message at start
stevegtrlmk said:
I flashed 161 with twrp and still comes up that this phone unsafe message at start
Click to expand...
Click to collapse
Thats weird. Isnt there an option to relock the bootloader on the toolkit?
Sent from my Huawei P9 Lite using XDA Labs
Dankmeme said:
Thats weird. Isnt there an option to relock the bootloader on the toolkit?
Click to expand...
Click to collapse
Tried that too the toolkit goes into error when. I try lol
Put the update.app in the root of your internal storage (not sd card), turn off your phone and turn it on while pressing volume up key. Stock firmware will install and you bootloader will be automagically relocked
enzo24754 said:
Put the update.app in the root of your internal storage (not sd card), turn off your phone and turn it on while pressing volume up key. Stock firmware will install and you bootloader will be automagically relocked
Click to expand...
Click to collapse
Tried that no luck won't update I just want rid of that dam warning message as I want to sell get something easier to flash roms so easy to flash roms on my old s4 compared to the p9
stevegtrlmk said:
Tried that no luck won't update I just want rid of that dam warning message as I want to sell get something easier to flash roms so easy to flash roms on my old s4 compared to the p9
Click to expand...
Click to collapse
It isn't that hard right? I don't think its very different than on other devices. For example, cyanogenmod is just some touching some wipe an flash buttons. However I agree that this may not be the best device for roms. But not horibble.
Sent from my Huawei P9 Lite using XDA Labs
Using adb you should type
fastboot oem lock xxxxxxxxxxxxxxxx (14 or 16 i don't remember)
I did this and it didn't show me the message, btw if you go into fastboot mode after this it will says: fastboot relocked or something else
*I'm from italy so maybe I did some mistakes*
Warning: This is probably gonna be a long post and may have typos.
Now, let's cut to the chase.
I'm currently on my Mate 8 emui.4, I had my phone rooted a while ago with TWRP and SuperSu. After rooting, I had the nougat update and I updated without knowing that it would remove TWRP and my root access. That was not the only problem! I couldn't switch on my Bluetooth. Also I lost the update option from the about phone location. I tried searching it in the search bar and clicking on the update button but, nothing would open up. And.. Yes, it was an official update. I tried to root it with the usual method but, it got me into a bootloop. I tried most TWRP versions but, it didn't seem to work! Either there would be no recovery (just a Black screen with some text) or the options inside the TWRP recovery wouldn't work. So I rerolled back to Mate 8 marshmellow. Now I don't have root, no TWRP or unlocked bootloader. So my question is if I should root my current phone version of emui.4 and be satisfied by it by unlocking bootloader now and rooting it, or update my phone to Mate 8 nougat again? If you're suggesting I update to nougat please provide me with ALL the necessary files to root Nougat and please guide me through. And provide me with the information on what to do in the worst case scenario too.. Please .
@Devil Chan
I think you should make like that:
Download the new firmware without to install it
Unpack the bigger file in a dload folder created on the external sd. You must to have a big file (more than 1 GB), inside you should find an update.app file, you put this one on the dload folder
Unlock bootloader
Install insecure boot for your current firmware (B200)
Install twrp
Reboot to twrp
Wipe - factory reset
Format data
Power off your phone
Install new firmware via the 3 buttons combo
After installation, make a factory reset via erecovery
Power off the phone and reboot to bootloader
Install Decrypted data boot for the B560
Install frd-twrp
Reboot to the twrp
Format data
Reboot to the twrp
Install update data of NXT-L29C185B560, I think you also have it in the downloaded files of your new firmware
Install supersu EMUI 5.0
Reboot system - normally fully rooted
For the 1 & 2, I think the files are like I said, if no, don't make this tuto. You shall see otherwise.
For the 4, it's the little issue. You must to recover a stock boot B200 and I could make you the insecure boot or Decrypted data boot, it's almost the same.
For the root questions, we can continue here.
This may seem very complicated but don't worry, it's not!
[[/QUOTE]
franzyroy said:
@Devil Chan
I think you should make like that:
Download the new firmware without to install it
Unpack the bigger file in a dload folder created on the external sd, you must to have a big file (more than 1 GB), inside you should find an update.app file, you put this one on the dload folder
Unlock bootloader
.....
Install supersu EMUI 5.0
Reboot system - normally fully rooted
For the 1 & 2, I think the files are like I said, if no, don't make this tuto. You shall see otherwise.
For the 4, it's the little issue. You must to recover a stock boot B200 and I could make you the insecure boot or Decrypted data boot, it's almost the same.
This may seem very complicated but don't worry, it's not!
Click to expand...
Click to collapse
First of all thank you so very much for replying,
I'm sorry, I'm a newbie. I have a few questions.
Where do I download the firmware from? link me to it please?
What is insecure boot? Flash using fastboot? Link?
7 and 8, Factory reset doesn't format data? Using erecovery or TWRP?
What's frd-twrp? How do I install it?
Step 10 and 18, after installing the new firmware, why would I need to update it? How do I update it?
Can you make me the insecure boot? I don't know how to use it? Do I just flash it with fastboot?
Sorry got asking so many questions.. I feel really bad asking this many.
I can't answer now, I try to answer you later.
franzyroy said:
I can't answer now, I try to answer you later.
Click to expand...
Click to collapse
Ok, later then..
Devil Chan said:
Where do I download the firmware from? link me to it please?
What is insecure boot? Flash using fastboot? Link?
7 and 8, Factory reset doesn't format data?
Using erecovery or TWRP?
What's frd-twrp? How do I install it?
Step 10 and 18, after installing the new firmware, why would I need to update it?
How do I update it?
Can you make me the insecure boot?
I don't know how to use it? Do I just flash it with fastboot?
Click to expand...
Click to collapse
Your first screenshot, you can update it there.
Insecure boot is a boot.img which enable you to decrypt your data folder. It's necessary to root. You flash it with fasboot, ok.
Yes, Factory reset doesn't format the data
TWRP
it's a unofficial twrp for Nougat. You flash it with fasboot
Because you should format the data before
Via TWRP if it's really like I think (obtained files in the update)
Yes if I've the stock boot. Normally you can recover it via ADB
Yeah
franzyroy said:
Your first screenshot, you can update it there.
Insecure boot is a boot.img which enable you to decrypt your data folder. It's necessary to root. You flash it with fasboot, ok.
Yes, Factory reset doesn't format the data
TWRP
it's a unofficial twrp for Nougat. You flash it with fasboot
Because you should format the data before
Via TWRP if it's really like I think (obtained files in the update)
Yes if I've the stock boot. Normally you can recover it via ADB
Yeah
Click to expand...
Click to collapse
If I update from the location of the screenshot, won't it update automatically?
Possibly final question, I get files for step 10 from the screenshot location.. But, where do I get the file for step 18 that I have to install with twrp?
Devil Chan said:
If I update from the location of the screenshot, won't it update automatically?
Possibly final question, I get files for step 10 from the screenshot location.. But, where do I get the file for step 18 that I have to install with twrp?
Click to expand...
Click to collapse
Normally no.
Normally it proposes you at least 2 files, one bigger than 1 GB and another smaller than 1 GB. First is update and second is update data
franzyroy said:
Normally no.
Normally it proposes you at least 2 files, one bigger than 1 GB and another smaller than 1 GB. First is update and second is update data
Click to expand...
Click to collapse
1. So I have to place the first on in dload and second one update with TWRP?
2. In case I mess up something... I just have to reroll back to marshmellow using dload with the older update data. Right?
? Thank you so very.. Very.. Very much for you time
I'm sorry for asking so many questions! Again..
Devil Chan said:
1. So I have to place the first on in dload and second one update with TWRP?
2. In case I mess up something... I just have to reroll back to marshmellow using dload with the older update data. Right?
Click to expand...
Click to collapse
The first should be update.app file extracted to the big file (above 1 GB), you will put it in dload. The second will be a zip what you will install with the TWRP.
Via dload method, yes!
Show me files once downloaded in order to be sure!
franzyroy said:
The first should be update.app file extracted to the big file (above 1 GB), you will put it in dload. The second will be a zip what you will install with the TWRP.
Via dload method, yes!
Show me files once downloaded in order to be sure!
Click to expand...
Click to collapse
Where will the downloaded update be located?
Devil Chan said:
Where will the downloaded update be located?
Click to expand...
Click to collapse
Look to the internal SD... certainly there!
franzyroy said:
Look to the internal SD... certainly there!
Click to expand...
Click to collapse
Thank you found them. An update.zip and an update_data_full. Can you get me the B200 insecure boot?
Devil Chan said:
Thank you found them. An update.zip and an update_data_full. Can you get me the B200 insecure boot?
Click to expand...
Click to collapse
Fine
@Devil Chan
Look that! This is the decrypted boot img of your build.
franzyroy said:
@Devil Chan
Look that! This is the decrypted boot img of your build.
Click to expand...
Click to collapse
Thank you for all your help.
Devil Chan said:
Thank you for all your help.
Click to expand...
Click to collapse
Hi guys, i was trying to restore my device from a custom rom to the stock version following the restoring and the rebranding guide of the thread on the forum about it. In conclusion:
-everytime i try the dload method (with the nocheck recoveries) the update stops at 5% with "uncompatible version".
-Once i finally installed the B182 version, the camera didn't work and the system was unstable, maybe for some error in the Vendor package.
-I also tried to flash the images of cust userdata system and boot but no results
My idea was to restore the B130 and then to update by emui to b182.
Can anyone solve this big problem?
(SORRY for the english, I'm Italian)
Try the restoring guide by OldDroid
I followed that guide, but nothing. Can anyone give me a Nandroid backup of european stock version?
If you have the update.app file , use Huawei update extractor to get recovery and recovery2 IMG files, flash them using fastboot commands .
Then try to place ROM file in dload , use vol up+ down and power button to flash it.
amulbaby said:
If you have the update.app file , use Huawei update extractor to get recovery and recovery2 IMG files, flash them using fastboot commands .
Then try to place ROM file in dload , use vol up+ down and power button to flash it.
Click to expand...
Click to collapse
So the version of the firmware is not relevant for the dload method ? I mean, it doesn't matter if I've installed the B182 and in dload i put the 130 one?
stestrippoli said:
So the version of the firmware is not relevant for the dload method ? I mean, it doesn't matter if I've installed the B182 and in dload i put the 130 one?
Click to expand...
Click to collapse
It shouldn't . Give it a try. Share results
amulbaby said:
It shouldn't . Give it a try. Share results
Click to expand...
Click to collapse
Ok I will. Just a question: now I've installed Lineage OS, is there some wipe I have to do before the dload method? Or I just have to install the two recoveries?
stestrippoli said:
Ok I will. Just a question: now I've installed Lineage OS, is there some wipe I have to do before the dload method? Or I just have to install the two recoveries?
Click to expand...
Click to collapse
Just install the two recoveries and flash through dload
PalakMi said:
Just install the two recoveries and flash through dload
Click to expand...
Click to collapse
Nothing, it doesn't work. "software install failed!" at 5%
stestrippoli said:
Nothing, it doesn't work. "software install failed!" at 5%
Click to expand...
Click to collapse
I ran out of ideas
Sorry
stestrippoli said:
Nothing, it doesn't work. "software install failed!" at 5%
Click to expand...
Click to collapse
try installing some higher version than B132 then if it is available for your device,
shashank1320 said:
try installing some higher version than B132 then if it is available for your device,
Click to expand...
Click to collapse
I installed the 182 flashing images (dload method didn't worked) from update.app, but there was so many issues (like the camera which wasn't installed or inexistent calling function)
stestrippoli said:
I installed the 182 flashing images (dload method didn't worked) from update.app, but there was so many issues (like the camera which wasn't installed or inexistent calling function)
Click to expand...
Click to collapse
Factory reset does any help?
shashank1320 said:
Factory reset does any help?
Click to expand...
Click to collapse
Already tried, no results. I really don't understand why i tried every single method in this guide, also used by other users, but without any success. Every single time it stops at 5% with dload or it goes in bootloop with flashed images from lower firmwares of 182.
My last idea was finding a Nandroid backup of stock version and the restore it from TWRP. But obviously I couldn't find it.
shashank1320 said:
Factory reset does any help?
Click to expand...
Click to collapse
Does the telephone be unrooted to do the method?
stestrippoli said:
Does the telephone be unrooted to do the method?
Click to expand...
Click to collapse
Nope it won't bring the camera app by rooting. Thinking of other options
Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.
strykrmas said:
Hi, I've seen a lot of updates for other builds but none for VNS-L23C6O5B102... Any help wud be appreciated.
Thanks.
Click to expand...
Click to collapse
Hi, check this Post: here
Greetings
Thanks bro....
cronociclope said:
Hi, check this Post: here
Greetings
Click to expand...
Click to collapse
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...
strykrmas said:
Ok... So I followed what was on the link to a T but on completion my phone requested a password and reset. I lost root, and twrp. And twrp isn't flashing. Help plz...
Click to expand...
Click to collapse
Unlock the bootloader again.
cronociclope said:
Unlock the bootloader again.
Click to expand...
Click to collapse
It appears to be still unlocked... According to fastboot
strykrmas said:
It appears to be still unlocked... According to fastboot
Click to expand...
Click to collapse
When the mobile phone turns on the orange letters?
cronociclope said:
When the mobile phone turns on the orange letters?
Click to expand...
Click to collapse
Yea... Its still there
strykrmas said:
Yea... Its still there
Click to expand...
Click to collapse
Unlock the bootloader even if it says it's unlocked.
Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help
strykrmas said:
Ok so now I unlocked the bootloader and viola twrp is back but I can't get my phone to start... Its asking for a password and says that the data is corrupt. So then I tried wiping it tru twrp and that has failed. "Unable to mount data". Help
Click to expand...
Click to collapse
In TWRP > Mount > untick and re-tick /data and then try formatting it.
Yip tried tht too... So the phone started back but it's reverted back to its original state... Locked bootloader, unrooted etc...
I can provide full service firmware VNS-L23C605B370 / VNS-L23C605B364 / VNS-L23C605B121
Ok... But can I use any of those tht you've outlined safely, becuz my phone works fine so far but it appears the data partition is damaged. Also the twrp recovery im using is 3.0.1 so I gonna try updating it.
Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?
install vns-l23c605b362 ou b374 with twrp
strykrmas said:
Right... so I've managed to get my phone back up and running by flashing the recovery2, recovery, cust and system files with L23C605B120 instead of B102 as it was. i've also managed to install twrp and rooted it. I've noticed that not any version of twrp works. Only the 3.0.0 version. Now i need help with updating my firmware from B120 to B362 if possible. through the official updater i attempted to install an official update but it kept failing... any suggestions... anyone?
Click to expand...
Click to collapse
Hello
as I see you can use twrp 3.0.
then, from then b120 MM.
1 bootloader code.
2 installs twrp.
3 go to wipe. check all except SD card.
4 go to install, install update.zip b362 and install update datafull.zip b362.
5 restarts.
here is.
2017.02.25 VNS-L23C605B362 update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v77299/f1/full/update.zip
update datafull http://update.hicloud.com:8180/TDS/...-L23_hw_la/update_data_full_VNS-L23_hw_la.zip
now, for vns-l23c605, there is a firmware b374.
you can install it too.
to do it.
you had to download all the files (full-ota-mf-pv b362+full-ota-mf b374) to your computer and handle them with winzip.
look at this post ( the video and the photo). https://forum.xda-developers.com/huawei-p9lite/how-to/update-p9-lite-nougat-ota-s-officials-t3661906
firmware
2017.10.19 VNS-L23C605B374 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1903/g1755/v100268/f1/full/update.zip
file public http://update.hicloud.com:8180/TDS/...68/f1/full/public/update_data_full_public.zip
file update full http://update.hicloud.com:8180/TDS/...l/VNS-L23_hw_la/update_full_VNS-L23_hw_la.zip
Source firmware http://pro-teammt.ru/firmware-database/?firmware_model=vns-l23c605&firmware_page=0
took your time reading everything before doing things.
Huawei P9 lite Chinese version
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.
labutes said:
Hello, I bought a Huawei P9 Lite Chinese version, I wonder if it is possible to install the international rom.
Click to expand...
Click to collapse
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.
Chisetdel31260 said:
which phone version do you have?
** more detail please?
g9 - ?? c ??? b ???
Do you have the bootloader code?
if no one is not going to help you.
Click to expand...
Click to collapse
Modelo: huawei VNS-AL00
Versão: VNS-AL00C00B230
CPU qualcoom sanapdragon
3 Gb Ram
yes i have the bootloader code