Related
https://www.mediafire.com/?922rx2xn53yt72r
Here it is. Enjoy. And yes it works on mine :fingers-crossed:
It's a new Official Update
Changelog taken from Android Police
-A new radio image.
-Touchscreen fixes (addresses BACON-55, which was originally reported and subsequently brought to our attention by Ausdroid). There's also an extensive thread on OnePlus' forums about it, among many other places (forum account needed).
Update: The fix is not complete, as reports of jumpiness are surfacing once again. It did fix the deadzone / random touches issue which prevented me from unlocking my phone for 10-15s at a time as I simply couldn't trace my pattern due to all the jumping around.
Unfortunately, the grounding issue which results in multitouch going nuts remains unfixed and must be resolved via another driver update. Another excruciating wait begins.
-Decreased power consumption in idle state (fixes BACON-599 which we wrote about here).
-Unspecified audio fixes.
-CVE-2014-4943 and another unspecified security update.
MD5 : 7538A068384C52FF6CA06C4B128B5ED1
P/S : I didn't have that jumpiness of sort, mine is working fine.
Flashing this worked perfectly for me. Thanks.
Glad to see it worked
Good job, works great
ravearamashi said:
https://www.mediafire.com/?922rx2xn53yt72r
Here it is. Enjoy. And yes it works on mine :fingers-crossed:
MD5 : 7538A068384C52FF6CA06C4B128B5ED1
Click to expand...
Click to collapse
Awesome!!!! Thanks so much
what is modified updater-script, is this the ota which is pushed by oneplus?
Is there a change log anywhere?
Fist and foremost,THANKS !
Could you perhaps elaborate on the update a bit ? e.g. this the official NEW update ?
boomam said:
Is there a change log anywhere?
Click to expand...
Click to collapse
You can check it out here. http://www.androidpolice.com/2014/0...ed-fixes-here-is-the-zip-for-manual-flashing/
Seems to work fine, thanks
Thanks m8, works perfectly.
What does it mean by modified updater script?
nice
Thank you
surronix said:
What does it mean by modified updater script?
Click to expand...
Click to collapse
I'm wondering the same thing. Can I flash this if I am on CM nightlies?
GETCASHMONEY said:
I'm wondering the same thing. Can I flash this if I am on CM nightlies?
Click to expand...
Click to collapse
No, it's strictly for CM11S
See, back when XNPH30O came out, lot of people couldn't update using OTA method when they are rooted/running Xposed/custom kernel and so forth because the OTA update would check the files before updating begins which of course the update would fail on devices running the aforementioned stuff. And a guy named Ludester modified the updater-script to bypass that file check and of course the update worked on these modified devices. So fast forward to this update, I just did the same thing.
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
joeee89 said:
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
Click to expand...
Click to collapse
Yes, and wipe cache after flashing then reboot.
joeee89 said:
Sorry Guys, but with TWRP i go into recovery and simply flash this file?
Click to expand...
Click to collapse
Yes you can
wipe
there is no need to wipe
i just installed it an no problems
i didt no wipe
Nope.
Phone is stuck at the OnePlus Logo after flashing via TWRP. Wiping caches and re-flashing didn´t help.
Hey guys,
I have the YotaPhone 2 and it's stuck on lollipop 5.0 for ages.
It feels like they ditched this phone completely.
What do you think guys?
Someone has some different info?
I hope not, some marshmallow would be nice and i am about do start an cyanogenmod port (if if find the time...)
fies76 said:
I hope not, some marshmallow would be nice and i am about do start an cyanogenmod port (if if find the time...)
Click to expand...
Click to collapse
good news!
TopTomy said:
Hey guys,
I have the YotaPhone 2 and it's stuck on lollipop 5.0 for ages.
It feels like they ditched this phone completely.
What do you think guys?
Someone has some different info?
Click to expand...
Click to collapse
I've spoken to them a couple of times, both their Facebook page and their customer service indicated their won't be a move up to Marshmallow, very doubtful over a move to 5.1 even. Any more updates will be focussed with optimising the existing software, adding slight features for the EPD etc.
Sad but they are a small company, seems they can only focus on 1 model and a time.
zute333 said:
I've spoken to them a couple of times, both their Facebook page and their customer service indicated their won't be a move up to Marshmallow, very doubtful over a move to 5.1 even. Any more updates will be focussed with optimising the existing software, adding slight features for the EPD etc.
Sad but they are a small company, seems they can only focus on 1 model and a time.
Click to expand...
Click to collapse
Thanks for sharing!
New Update .
Still Lollipop 5.0, but brings some useful improvements and enhancements. I'll take it.
I hope, with the release of the Yota 3 and 2c, that the price of the YD201 falls down. They can't update neither Yota 1 and 2. I still got the first one, but just because I live in Brazil and got from a nice guy that agreed to sell and send his Yotaphone 1 to me from India.
Anyone inclined to sell your Yota2 please talk to me.
zute333 said:
New Update .
Still Lollipop 5.0, but brings some useful improvements and enhancements. I'll take it.
Click to expand...
Click to collapse
Woot??
You got a new firmware OTA?
mine shows nothing!
TopTomy said:
Woot??
You got a new firmware OTA?
mine shows nothing!
Click to expand...
Click to collapse
It's for the RU (russian) firmware, if you check the other threads there are methods to flash the previous version. I have been using it for a few iterations now, the new one worked as an OTA, even with TWRP (they added something to reflash the stock recovery, Yota noticing the significant root community using this phone in Russia at least).
zute333 said:
It's for the RU (russian) firmware, if you check the other threads there are methods to flash the previous version. I have been using it for a few iterations now, the new one worked as an OTA, even with TWRP (they added something to reflash the stock recovery, Yota noticing the significant root community using this phone in Russia at least).
Click to expand...
Click to collapse
Thanks for the info!
I only believe it when it is real, but according to info from tech support, also the EU firmware will get an update this month...
BTW, lollipop isn't too bad, I switched back from marshmallow on my nexus 7 - too much battery drain. if Google could get it right the first time, you wouldn't need monthly bug fixes. not saying that an update for the yota isn't overdue...
Is just me that can't update? I have no OTA and flashing manually gives me "no MD5 file found" error
TKPL said:
Is just me that can't update? I have no OTA and flashing manually gives me "no MD5 file found" error
Click to expand...
Click to collapse
More info please .
firmware version? software version?
can you skip the md5 checksum?
you're rooted, so can you download the russian (RU) firmware and flash that?
zute333 said:
More info please .
firmware version? software version?
can you skip the md5 checksum?
you're rooted, so can you download the russian (RU) firmware and flash that?
Click to expand...
Click to collapse
Yes, thanks
Sorry what you mean with firmware and software version? Phone was running Kitkat 4.4.2 or 3 (now is bricked).
I cannot skip the checksum, no such option in my TWRP (2.8.5). There are others option about checksum on backup but no skipping during install.
I am rooted (and bootloader is unlocked) but I cannot install the RU version. Here I don't understand why you ask me if I am rooted: I can install from recovery or TWRP without root
I downloaded all RU versions and the last EU version from the ftp and I got the MD5 error with all, both Lollipop and KitKat.
Then I tried with Yota Flasher utility: I saw that for flash ROM it was seeking for "firmware" path, so I created "firmware" path and put there the ROM.
I started to flash and it took only some seconds... I understood immediately phone has gone bricked.. and so it is...
Then I tried to download the firmware through Yota Flasher: it arrived to 100% and got stuck in there...
I'm trying to redownload it and hope to flash the system, phone is here in downloading mode waiting...
Provide you my flash method, manually. Use the fastboot.exe in cmd, and type command line below
****************************************************************************
fastboot.exe flash aboot firmeare/emmc_appsboot.mbn
fastboot.exe flash boot firmware/boot.img
fastboot.exe flash -S 512M system firmware/system.img
fastboot.exe flash recovery firmware/recovery.img
fastboot.exe flash cache firmware/cache.img
fastboot.exe flash modem firmware/radio/NON-HLOS.bin （flash the radio）
fastboot.exe flash sbl1 firmeare/radio/sbl1.mbn
fastboot.exe flash rpm firmware/radio/rpm.mbn
fastboot.exe flash aboot firmware/emmc_appsboot.mbn （flash again, just do it.）
fastboot.exe flash userdata firmware/userdata.img （notice this is for the user data, including app data and SD）
fastboot.exe reboot (reboot and wait, about 20 min stuck on logo, it's ok.)
Thank you xingshi.
I'll try.
How long does the entire process take?
TKPL said:
Yes, thanks
Sorry what you mean with firmware and software version? Phone was running Kitkat 4.4.2 or 3 (now is bricked).
I cannot skip the checksum, no such option in my TWRP (2.8.5). There are others option about checksum on backup but no skipping during install.
I am rooted (and bootloader is unlocked) but I cannot install the RU version. Here I don't understand why you ask me if I am rooted: I can install from recovery or TWRP without root
I downloaded all RU versions and the last EU version from the ftp and I got the MD5 error with all, both Lollipop and KitKat.
Then I tried with Yota Flasher utility: I saw that for flash ROM it was seeking for "firmware" path, so I created "firmware" path and put there the ROM.
I started to flash and it took only some seconds... I understood immediately phone has gone bricked.. and so it is...
Then I tried to download the firmware through Yota Flasher: it arrived to 100% and got stuck in there...
I'm trying to redownload it and hope to flash the system, phone is here in downloading mode waiting...
Click to expand...
Click to collapse
UPDATE
Via Yota Flasher I download succesfully the 4.4.3 and flashed the phone. Now it's back
I tried to download again the 5.0 EU but no way: arrives at 100% and stops. If I check file's dimension I see it is a couple of kbytes below the size of the other package I downloaded from web browser and in fact it's impossibile to open the zip.
I'll try to download other version of Lollipop through the Yota Flasher.
TKPL said:
UPDATE
Via Yota Flasher I download succesfully the 4.4.3 and flashed the phone. Now it's back
I tried to download again the 5.0 EU but no way: arrives at 100% and stops. If I check file's dimension I see it is a couple of kbytes below the size of the other package I downloaded from web browser and in fact it's impossibile to open the zip.
I'll try to download other version of Lollipop through the Yota Flasher.
Click to expand...
Click to collapse
NEW UPDATE
I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet. I open a thread for this...
TKPL said:
NEW UPDATE
I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet. I open a thread for this...
Click to expand...
Click to collapse
Same here , have just bought the YOTA 2 too, Vod branded. I wanted to upgrade to to EU 1.60 (rom which seems to be pretty stable): Can I ask you if you have the 1.60 actually or the 1.9x (Russian one)?.
The bug you describe seems to be a real pain, do not want to risk.
Will appreciate any help.
Thx mate
lexman941 said:
Same here , have just bought the YOTA 2 too, Vod branded. I wanted to upgrade to to EU 1.60 (rom which seems to be pretty stable): Can I ask you if you have the 1.60 actually or the 1.9x (Russian one)?.
The bug you describe seems to be a real pain, do not want to risk.
Will appreciate any help.
Thx mate
Click to expand...
Click to collapse
I have the 1.60 EU.
You can make a NAND backup and then flash the newest firmware, trying maybe the 1.99 RU. Even if you flash the 1.60 EU, is not sure that you'll have my same problem, there's people who flashed without issues...
Hi everyone, I got this full Nougat package yestaday, people outside the US or AT&T can flash it by Odin update your system to Android N with Feb secuity path. Here is the link, download it can unzip, use Odin flash four files expect pit file(I don't know what it is, I flash without it and my phone works well), waiting five minutes and enjoy it!
mega:https://mega.nz/#!4FBSEYRA!3Sepq2lGz0Y-hINa3eT0i_Ota918zLqSntMrbu8CQAw
Worked for me!
I googled how to flash using odin downloaded the version advice for marsmallow and flashed the version you shared. Was a little nervous at restarting but it all went through smoothly.
smxwang said:
Hi everyone, I got this full Nougat package yestaday, people outside the US or AT&T can flash it by Odin update your system to Android N with Feb secuity path. Here is the link, download it can unzip, use Odin flash four files expect pit file(I don't know what it is, I flash without it and my phone works well), waiting five minutes and enjoy it!
mega:https://mega.nz/#!4FBSEYRA!3Sepq2lGz0Y-hI...SntMrbu8CQAw
Click to expand...
Click to collapse
Thanks for your help!
Regarding your mega url, i tried to access you provided link. But its broken. Maybe XDA system broke the correct link.
Here is correct url of above mega link.
Code:
https://mega.nz/#!4FBSEYRA!3Sepq2lGz0Y-hINa3eT0i_Ota918zLqSntMrbu8CQAw
Pulverizer said:
Thanks for your help!
Regarding your mega url, i tried to access you provided link. But its broken. Maybe XDA system broke the correct link.
Here is correct url of above mega link.
Code:
https://mega.nz/#!4FBSEYRA!3Sepq2lGz0Y-hINa3eT0i_Ota918zLqSntMrbu8CQAw
Click to expand...
Click to collapse
Thx, Links is repaired.
Thanks for posting, was able to get me back to stock firmware when I was in a pinch.
Really appreciate it.
Worked for me, too
Acinko said:
Thanks for posting, was able to get me back to stock firmware when I was in a pinch.
Really appreciate it.
Click to expand...
Click to collapse
Same here, many thanks for the post!
Well I was unable to get the download posted above??? But I found it elsewhere. Now can you just flash this directly to the phone via Odin to replace the PL4 version I am currently running???
Churs
Was able to get from QA7 (which had no upgrade path that I could find) to QB2 without issue. Thanks for posting this. :cyclops:
Is there an issue for flashing this on an AT&T phone?
sobertillnoon said:
Is there an issue for flashing this on an AT&T phone?
Click to expand...
Click to collapse
Im also wondering why this firmware is for people who are outside of US.
KGB7 said:
Im also wondering why this firmware is for people who are outside of US.
Click to expand...
Click to collapse
I think they just mean that if you have an AT&T phone in the US you would get the updates as OTAs and likely before any of the flashable images showed up on the web. You would be less likely to need to flash a stock firmware. But, I could be wrong.
I have baseband : g891aucu1apg7
Unlocked at&t and outside us, should i upgrade it directly to this firmware or i need to step up my baseband one at a time?
KGB7 said:
Im also wondering why this firmware is for people who are outside of US.
Click to expand...
Click to collapse
See bullet points below:
* A person buys this AT&T exclusive phone, it is network-unlocked so that any SIM card will work (even those from other countries)
* That person brings the phone outside of the US but still plans on using it with a non-AT&T SIM card (a consultant, a businessman, a tourist, etc..).
Or maybe that person lives in another country and just wants to use this particular phone.
* However, AT&T OTA (Over-The-Air) incremental updates only work "within" AT&T network (an AT&T subscriber).
* Therefore, since that person is using a non-AT&T SIM on this phone, automatic OTA updates will NOT trigger/work.
* The solution is to "manually flash" the OTA update by obtaining a copy of that file--Then manually flash it, either via "Modified-ODIN" or via the "Standard Recovery Mode" -- This works, and should not stop people in the US (who are also AT&T subscribers) to use it.
* This is just a work-around-OTA-update (manual flash) for those people outside the US or for those people using a non-AT&T SIM card (US or non-US).
* It should be noted that an OTA update is only a PARTIAL update that is dependent on the currently installed version.
For example: If there is an update "version D" available, the person must ensure that his phone's current firmware is "version C". If not, then that person would have to find the missing updates first before flashing to the latest OTA: "ver A --> ver B --> ver C --> ver D"
This is time consuming and confusing to some, therefore... It is preferable to have ONE complete package, all-in.
* Thus the existence of this STOCK FULL FIRMWARE file. It contains the complete files and drivers necessary to quickly update that person's phone directly to the recent/latest version without worrying about version dependencies or incompatibilities.
* This full firmware update will ERASE your settings and data, so back them up with known methods.
* This firmware update will not change your network/sim-lock status. If yours is unlocked, it will stay unlocked.
This firmware update contains the following files:
AP_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT_meta.tar
BL_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
CP_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
CSC_ATT_G891AATT2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
POSEIDONLTE_USA_ATT.pit (not required to flash this one, for advanced users only)
jembot said:
See bullet points below:
* A person buys this AT&T exclusive phone, it is network-unlocked so that any SIM card will work (even those from other countries)
* That person brings the phone outside of the US but still plans on using it with a non-AT&T SIM card (a consultant, a businessman, a tourist, etc..).
Or maybe that person lives in another country and just wants to use this particular phone.
* However, AT&T OTA (Over-The-Air) incremental updates only work "within" AT&T network (an AT&T subscriber).
* Therefore, since that person is using a non-AT&T SIM on this phone, automatic OTA updates will NOT trigger/work.
* The solution is to "manually flash" the OTA update by obtaining a copy of that file--Then manually flash it, either via "Modified-ODIN" or via the "Standard Recovery Mode" -- This works, and should not stop people in the US (who are also AT&T subscribers) to use it.
* This is just a work-around-OTA-update (manual flash) for those people outside the US or for those people using a non-AT&T SIM card (US or non-US).
* It should be noted that an OTA update is only a PARTIAL update that is dependent on the currently installed version.
For example: If there is an update "version D" available, the person must ensure that his phone's current firmware is "version C". If not, then that person would have to find the missing updates first before flashing to the latest OTA: "ver A --> ver B --> ver C --> ver D"
This is time consuming and confusing to some, therefore... It is preferable to have ONE complete package, all-in.
* Thus the existence of this STOCK FULL FIRMWARE file. It contains the complete files and drivers necessary to quickly update that person's phone directly to the recent/latest version without worrying about version dependencies or incompatibilities.
* This full firmware update will ERASE your settings and data, so back them up with known methods.
* This firmware update will not change your network/sim-lock status. If yours is unlocked, it will stay unlocked.
This firmware update contains the following files:
AP_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT_meta.tar
BL_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
CP_G891AUCU2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
CSC_ATT_G891AATT2BQB2_CL10651105_QB12578871_REV02_user_low_ship_MULTI_CERT.tar
POSEIDONLTE_USA_ATT.pit (not required to flash this one, for advanced users only)
Click to expand...
Click to collapse
Thanks for your detailed explanation, that's right, It is diffcult for AT&T phone outside US updating to the latest based.
Went through good, resolved several pre-existing issues I had with the device. However it now tells me that I can't use Samsung Pay due to an Unauthorized Modification. Additionally, I'm now stuck on 4G instead of 4G LTE, and I can't access the radio settings via *#*#4636#*# and lastly some menu options in Settings simply crash it. Other than that works fine
where can I find the next update after february security update?
whats the password for the file
Best root method for this firmware , flash aboot BL, or twrp in AP ?
Can anyone point me towards the most recent odin flashable nougat image? thanks in advance
dantonuci said:
Best root method for this firmware , flash aboot BL, or twrp in AP ?
Click to expand...
Click to collapse
best method we have for root in nougat is the eng.boot.img that activefan01 obtained on around #710 in the active root sucess thread...
BL is not unlocked, so no twrp for us, only flashfire
monocle503 said:
Can anyone point me towards the most recent odin flashable nougat image? thanks in advance
Click to expand...
Click to collapse
QB2 in the OP is the best one we have currently...
Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
NamelessGhoulx said:
Hello everyone, I'm new to the forum, I'm looking for help with a Moto X style XT1575. I tell you the problem: I bought a Moto X Style used on the internet and it turns out that WiFi does not work, the phone is with MM 6.0.1. Entering Configuration, WiFi, you see a line with movement, as if the phone is still searching for networks with the switch turned off and when you try to activate it, it immediately goes back on by itself. I was reading a bit about this error and it seems quite repeated, not only in this model but also in other Motorola. I saw cases in which besides the WiFi also does not work the Bluetooth, in my case the problem is only in the Wifi. The phone is not rooted or anything, it is factory and reset, I am not sure if it is free but apparently yes, because I accepted sims from two different companies.
Could you help me solve this? From already thank you very much
(I'm using the Google translator, sorry if something I say is not understood)
Click to expand...
Click to collapse
Is the bootloader unlocked?
No, I think it was officially updated to MM and was left with this problem.
NamelessGhoulx said:
No, I think it was officially updated to MM and was left with this problem.
Click to expand...
Click to collapse
If the bootloader is locked the solution i can think of is to flash the latest firmware (if available).
If there any hardware fault then flashing firmware won't fix this.
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
NamelessGhoulx said:
Reflash MM? Would that fix the WiFi? I have read cases where the official update itself generates the problem, and they flash the modem and it works, without having to reload the whole system. I do not really know what to do
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/moto-x-style/general/xt1575-stock-mphs24-49-18-16-files-t3641863
And flash non-hlos.bin and fsg.bin (at your own risk)
This may fix it.
And don't forget to see if the build version matches.
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
NamelessGhoulx said:
It looks like the versions match. To do this I have to unlock the bootloader and root the phone, is that correct? I'm a rookie, you'll see
Click to expand...
Click to collapse
Those are stock images so i don't think you need to unlock bootloader. Just flash via fastboot.
Only flash non-hlos.bin and fsg and also Bluetooth if Bluetooth isn't working.
You can flash via fastboot?
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
NamelessGhoulx said:
In that post says it's for Pure and my phone is Style. I know they are the same but that clarification made me doubt.
I have not tried because I do not understand how to do it, I see many posts about this and I do not know where to start
Click to expand...
Click to collapse
Read carefully the first and second line of the screenshot you have given. It show moto x pure edition.
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
NamelessGhoulx said:
Update to Nougat would solve this or would it be better to try to flash only those files as it is now in MM?
I could only update using my operator's internet
Click to expand...
Click to collapse
You can't update using mobile data you have to use wifi.
Marshmallow doesn't allow updates via mobile data.
But u can use other mobile and creat wifi hotspot to update.
U can try updating. But in cause some thing break you may have to unlock your bootloader.
And is nougut available for xt1575?
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
NamelessGhoulx said:
Yes, Nougat is now available for some regions. How can i create a hotspot if te phone does not have WiFi? Can not connect to any network
Click to expand...
Click to collapse
Oh,right forgot about that.
You can use nougut update zip for xt1575 (if available i couldn't find any)
Or flash is the last option.(i don't know any other fix).
Do you have adb and fastboot in your pc?
No. I'm totally new, I do not understand practically anything
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Alright, you are going to want to download minimal fastboot and adb drivers for PC (assuming you are on windows?) https://forum.xda-developers.com/showthread.php?t=2317790&page=70 You do not need an unlocked bootloader or need to be rooted to be able to flash stock. @yk1999 provided the correct file, and so just Google how to flash the commands @yk1999 said. Or follow this guide of how to relock bootloader.
https://forum.xda-developers.com/mo...rn-to-stock-relock-bootloader-t3489110/page33
Edit : the commands are fastboot flash...and then the file names that @yk1999 posted. This should be enough. Download the file I linked you for fastboot and adb, turn on us debugging in settings, and then flash away!
NamelessGhoulx said:
No. I'm totally new, I do not understand practically anything
Click to expand...
Click to collapse
Install adb
Goto bootloader
Connect your usb cable to pc
Press enter after writing each line
fastboot flash modem non-hlos.bin(path to non-hlos.bin)
fastboot flash fsg fsg(path to fsg)
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
fastboot reboot
Thanks to both of you. I do not need the drivers of the phone?
NamelessGhoulx said:
Thanks to both of you. I do not need the drivers of the phone?
Click to expand...
Click to collapse
Drivers are included with adb but you can install Motorola device manager it will also install drivers. Search it on Google.
Many thanks to both, I could solve it. They really saved me, I do not know how to thank them
Hi everybody,
yesterday I found this news:
https://www.sammobile.com/2017/10/16/galaxy-j3-2016-android-7-1-1-nougat-update-released-att/
Here the official page:
https://www.att.com/devicehowto/tut...tep_KM1147672?make=Samsung&model=GalaxyJ32016
I googling for a bit and I found the file of that update, those 4 file are tar.md5 and it's possible to use them by odin. Unfortunate when odin try to install the new system it show this error: Rev. system incorrect magic string (or something very similar)
I extrac those file and try to install separately any img or bin partition using heimdall in ubuntu, but again system and sboot image give me this error: ERROR: Failed to confirm end of file transfer sequence!
I don't know why, considering that my phone it's exactly the model, it suppose to be easy install those file.
Anyone already try to install that update or someone can give me some advice about those error?
I really like to see my phone with nougat running and this lñooks like the best chance.
Hope someone can help with that.
Thanks
Root isn't working atm, not sure if it will without unlocking either. But it is downgradable back to mm... I only have the update.zip, ill upload it in a bit.
Where's the 4 files? I couldn't find it
DamienMc said:
Root isn't working atm, not sure if it will without unlocking either. But it is downgradable back to mm... I only have the update.zip, ill upload it in a bit.
Where's the 4 files? I couldn't find it
Click to expand...
Click to collapse
Hi @DamienMc, here a couple of link where find those filehope I can post those link without breaking any rules, if i do sorry and tell me please)
http://gsm-firmware.com/index.php?a=browse&b=category&id=10851 (paid)
https://androidfilehost.com/?fid=962021903579486981
I found the first link in the beginning so I've downloaded from there.
What do you mean with "Root isn't working atm"?
My phone it's already unlocked carrier. Witch version of android do you have for that update.zip?
The best I did was flashing the recovery, boot, param partition using the pit file inside of one of those 4 files. There also a folder with foto.zip file, but I can't use it for now.
Please let me know any ideas about how to flash that update.
I posted it here https://forum.xda-developers.com/galaxy-j3-2016/development/odin-j320a-j320az-links-t3631914
It's the ota zip, edited by me. You need to be rooted and use flashfire. My edits unroot your device then the original update takes over. Pita but that's all I have. I'll look at the full firmware or try to pull it from Samsung again.
But yeah, I wasn't able to root the thing. Haven't given up yet tho
@Iurop
Full firmware installed just fine here (besides an eof error on AP, prolly cause of the fota.zip)... are you sure you're not j320ag?
A and AZ have the same magic string, but AG is different. And can't crossflash with Odin.
@DamienMc
You right my it's a J320AG I was hoping that the firmware works fine for me, but my knowledge for now it's not enough to figured out how to flash those file. Do you know if there's any chance to do it in some way?
I will try your update.zip. In case you work around those nougat file and figured out how to use it on j320ag let me know.
Thanks.
I am afraid your stuck until you get the official update.
While your device can use the same system files here, it cannot use the kernel. And a new kernel is required for nougat.
On top of that your device is now two updates behind the j320a.
Here a couple of screenshot of the firmware version I had right now.
I don't know if Samsung will update this phone to nougat. Will be great.
After flashing the version of your update.zip and make the update, witch version of firmware will be present?
Flashing my phone with a at&t version of the firmware can help in some ways? Or at&t only manage J320A and AZ?
Thanks anyway.
AG = AQB1
AZ = AQG1
A = BQI5
The update.zip is BQI5.
Your best chance would be to try and dd the firmware you posted to see if it boots. I know i tried the system.img, not sure if I did the whole thing. Super dangerous tho...or just wait it out
[EDIT]
After further thought, a real rom.zip might just work on AG...a good test could be to boot a stock boot.img from A or AZ. Won't be 100%, but it'll be a good indication.
Or run it thru kitchen and try it out, if not I'll get to it when I have spare time
[/EDIT]
DamienMc said:
AG = AQB1
AZ = AQG1
A = BQI5
The update.zip is BQI5.
Your best chance would be to try and dd the firmware you posted to see if it boots. I know i tried the system.img, not sure if I did the whole thing. Super dangerous tho...or just wait it out
[EDIT]
After further thought, a real rom.zip might just work on AG...a good test could be to boot a stock boot.img from A or AZ. Won't be 100%, but it'll be a good indication.
Or run it thru kitchen and try it out, if not I'll get to it when I have spare time
[/EDIT]
Click to expand...
Click to collapse
@DamienMc, here what I've try until now:
-try to flash boot.img from this stock rom J320AZTUS3AQG1 using PIT file from my versios AG and also using PIT file from AZ version = can't be flashed in any ways.
-flash boot.img from J320A_J320AUCU3BQI5_AT&T_USA_7.1.1 using my PIT file = flashed but after the reboot hang on J3 logo
I don't understand what do yopu mean with "Or run it thru kitchen and try it out", can you explain please?
Also I don't know if Samsung release an update to Nougat for all J320 or it just the AT&T carier to do it. For that reason I've been trying to flash.
@Iurop
Well its good it doesnt fail with 7.1.1 boot....hopefully we can get it going.
I suggested that you create a rom.zip from the system.img a kitchen. But it wasnt that simple, i think i have a working zip now but cannot test it until later...i will pass it to you when its ready