I have a redmi note 7 china version... after 2/3 days i m going unlocking bootloader ..i thought after release of global rom i will flash it on my device... but todays launch event make me totally confused as note 7 releases with 12+2 mp and pro version releases with sd 675 having camera 48+5 MP...so which global rom i can flash?? One having same processor but not same camera other different processor but same 48+5 mp like mine one!!!!????
Asm Nasim said:
I have a redmi note 7 china version... after 2/3 days i m going unlocking bootloader ..i thought after release of global rom i will flash it on my device... but todays launch event make me totally confused as note 7 releases with 12+2 mp and pro version releases with sd 675 having camera 48+5 MP...so which global rom i can flash?? One having same processor but not same camera other different processor but same 48+5 mp like mine one!!!!????
Click to expand...
Click to collapse
I dont think u can. U have to unlock your bootloader and then install a rom from xiaomi.eu which is basically a multi English rom with Google integration
Hey! first I apologize for my bad English. I use google translate.
I'm a new one when it comes to Xioami, and want to buy a Note 7 from the internet, but it's with the china rom, so I have to change it to the global rom.
I have read a lot about how to do it, but I am still afraid to do so, but if I write a summary of what I understood:
1- I have to unlock my mobile. (360 hours wait)
2- Download global room from this page! http://en.miui.com/a-234.html
3- The room must be "fastboot file"?
4- I enter global rom with "Mi flash"
5- Can I relock bootloader after that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6- Will my mobile work or die after changing the room?
Bilal100 said:
Hey! first I apologize for my bad English. I use google translate.
I'm a new one when it comes to Xioami, and want to buy a Note 7 from the internet, but it's with the china rom, so I have to change it to the global rom.
I have read a lot about how to do it, but I am still afraid to do so, but if I write a summary of what I understood:
1- I have to unlock my mobile. (360 hours wait)
2- Download global room from this page! http://en.miui.com/a-234.html
3- The room must be "fastboot file"?
4- I enter global rom with "Mi flash"
5- Can I relock bootloader after that?
6- Will my mobile work or die after changing the room?
Click to expand...
Click to collapse
1. Yes you must wait
2. Download fastboot file rom
3. Must be fastboot file (file end with .tgz extract it use mi flash tool point to folder contain extracted files)
4. Yes
5. Don't do that if you want brick your phone
6. Yes if the flashing is suspended
Thanhbat said:
1. Yes you must wait
2. Download fastboot file rom
3. Must be fastboot file (file end with .tgz extract it use mi flash tool point to folder contain extracted files)
4. Yes
5. Don't do that if you want brick your phone
6. Yes if the flashing is suspended
Click to expand...
Click to collapse
Ok, thank u for answer.
So i can not relock bootloader? It will be oppen all the time?
Skickat från min E6653 via Tapatalk
You can buy directly a global rom version now, I see it in AliExpress.
It's more simple [emoji6]
Bilal100 said:
Ok, thank u for answer.
So i can not relock bootloader? It will be oppen all the time?
Skickat från min E6653 via Tapatalk
Click to expand...
Click to collapse
It will brick your phone
Thanhbat said:
It will brick your phone
Click to expand...
Click to collapse
Why would it brick your phone? It's official software from Xiaomi
Enddo said:
Why would it brick your phone? It's official software from Xiaomi
Click to expand...
Click to collapse
I've heard that Xiaomi is been doing something to it's latest devices that doesn't let you relock the bootloader after changing from China ROM to Global ROM.
EDIT: Here's a link with all the info you might want: https://en.gizchina.it/2018/09/xiaomi-lista-modelli-brick-miui-global-china/
Enddo said:
Why would it brick your phone? It's official software from Xiaomi
Click to expand...
Click to collapse
to prevent the chinese citizens escape from being monitored by the big brother
Adriancito232 said:
I've heard that Xiaomi is been doing something to it's latest devices that doesn't let you relock the bootloader after changing from China ROM to Global ROM.
EDIT: Here's a link with all the info you might want: https://en.gizchina.it/2018/09/xiaomi-lista-modelli-brick-miui-global-china/
Click to expand...
Click to collapse
This risk is if you do not know what you are doing. At the end of the page there is a explanation how it will brick your device and how to prevent it. So i guess if you use twrp or miflash with "flash_all" only selected you are good to go.
Adriancito232 said:
I've heard that Xiaomi is been doing something to it's latest devices that doesn't let you relock the bootloader after changing from China ROM to Global ROM.
EDIT: Here's a link with all the info you might want: https://en.gizchina.it/2018/09/xiaomi-lista-modelli-brick-miui-global-china/
Click to expand...
Click to collapse
Thanks for the source link. That's an interesting read and wasn't aware of this. I own some of those devices and could have sworn that I accidentally locked the bootloader on one of them and being forced to go through the unlock process (not because it was bricked, but because I wanted to test a different TWRP build).
However, I can't recall which phone that happened to. I own the Mi Mix 3, note 6 pro, note 5 pro, among others. I will look into this further.
Thanks again
---------- Post added at 10:19 AM ---------- Previous post was at 10:16 AM ----------
iofujsiow said:
to prevent the chinese citizens escape from being monitored by the big brother
Click to expand...
Click to collapse
but it only happens when the bootloader is relocked. I only see that limiting those who aren't rooting and using bypasses to bootloader detection (magisk).
and they still have to go through China's firewall, so they'll still be monitored.
this doesn't seem government related at all. seems to be another way for Xiaomi to attack resellers (similar to the bootloader unlock time limit)
Thanhbat said:
1. Yes you must wait
2. Download fastboot file rom
3. Must be fastboot file (file end with .tgz extract it use mi flash tool point to folder contain extracted files)
4. Yes
5. Don't do that if you want brick your phone
6. Yes if the flashing is suspended
Click to expand...
Click to collapse
Does this process apply for the Mi9 CN version?
Thank you
Where can I download global ROM for Chinese version via twrp
redmi note 7 china flash
who is version i use for redmi note 7 china variant
Unlock BL
Witch is mean if i unlock boot loader i cannot relock it any more?
mhonzter07 said:
Witch is mean if i unlock boot loader i cannot relock it any more?
Click to expand...
Click to collapse
You can relock but same version
Chinese rom with Chinese ver is ok can relock
Global rom with chinesse ver = bricked
Thanhbat said:
1. Yes you must wait
2. Download fastboot file rom
3. Must be fastboot file (file end with .tgz extract it use mi flash tool point to folder contain extracted files)
4. Yes
5. Don't do that if you want brick your phone
6. Yes if the flashing is suspended
Click to expand...
Click to collapse
Band support can change with different rom or is the same?
LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 20(800), 28(700), 38(2600), 40(2300) - Global
LTE band 1(2100), 3(1800), 5(850), 7(2600), 8(900), 34(2000), 38(2600), 39(1900), 40(2300), 41(2500) - China
Related
Can anyone tell me, please, which is the latest firmware for the Premium version of the P8?
By the way, is there diferent region P8 premiums?
I bought one in Portugal...is there any problem if, for example, the latest firmware version is available in Asia or Russia?
Probably this one:
http://consumer.huawei.com/ke/support/downloads/index.htm?keyword=ul00
Hi Friends,
My phone is P8 and GRA-UL10C433B180 .
Do anyone have official marshmallow for it?
meysamazizi said:
Hi Friends,
My phone is P8 and GRA-UL10C433B180 .
Do anyone have official marshmallow for it?
Click to expand...
Click to collapse
my phone p8 ul10 c433b180 on loolipop
now my phone p8 ul10 c185b320 marshmallow
i think GRA-L03 sem p8 ul10
sory bad speak english :victory:
try this http://consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
aswertya said:
my phone p8 ul10 c433b180 on loolipop
now my phone p8 ul10 c185b320 marshmallow
i think GRA-L03 sem p8 ul10
sory bad speak english :victory:
try this http://consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
Click to expand...
Click to collapse
Thanks a lot for your help.
Is your phone Ok with this upgrade?
Did you find any problem?
Do you use 2G/3G/4G same as begore?
Good afternoon .I am an owner of Dual Sim Huawei P8 GRA-UL10 Premium with 64GB Ram with 6.0 Marshmallow firmware C00B352 and EMUI 4.0 ,but this is a China rom without Googleplay services and many Chinese apps .
I already unlocked the Bootloader ,i put TWRP Recovery and i root it wirh Superuser .Is there a way to insert an Internatiol European Rom for this mobile?
meysamazizi said:
Thanks a lot for your help.
Is your phone Ok with this upgrade?
Did you find any problem?
Do you use 2G/3G/4G same as begore?
Click to expand...
Click to collapse
This is the official Marshmallow rom for the middle eastern region(C433), you will find the same download package for many countries like(Tunisia, Jordan, Algeria...). Not sure if the Russian rollback package from Marshmallow to Lollipop works for your region though in case you want to go back to Lollipop. Anyway Marshmallow is way better than Lollipop in my opinion.
---------- Post added at 07:35 PM ---------- Previous post was at 06:56 PM ----------
manospr said:
Good afternoon .I am an owner of Dual Sim Huawei P8 GRA-UL10 Premium with 64GB Ram with 6.0 Marshmallow firmware C00B352 and EMUI 4.0 ,but this is a China rom without Googleplay services and many Chinese apps .
I already unlocked the Bootloader ,i put TWRP Recovery and i root it wirh Superuser .Is there a way to insert an Internatiol European Rom for this mobile?
Click to expand...
Click to collapse
I suggest you stay on the chinese rom you get updates faster that way than any other region, more stable but the down side is the missing google services as you mentioned. There isn't a tested method for our device model of doing this but there is an old method that worked for another Huawei device if you are brave enough to attempt it. http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Some ideas that might make this work in theory( This can break your phone, so do this at your own risk and don't forget to backup the original files and restore the default permissions when making changes):
1- Follow the link until procedure: step 2.
2-You can try step 3 or another way i guess you can try: Revert back to an old chinese Lollipop rom on you phone, then download an asian Lollipop rom(ex: Malaysia) extract from the rom the "OEM Info File" needed. Then on your phone go to "/dev/block/hi_mci.0/by-name/" notice the location of these files might be different in you rom but they are there you have to search for them though. After finding the location of the folder copy and replace the files form the Malaysian rom to your phone. After that try to install again the same Malaysian rom and see if it works but this may break your phone. If this works you can then proceed to download a Malaysian Marshmallow rom and install it.
Just wanted to give my 2 cents :laugh:
Rashad83 said:
This is the official Marshmallow rom for the middle eastern region(C433), you will find the same download package for many countries like(Tunisia, Jordan, Algeria...). Not sure if the Russian rollback package from Marshmallow to Lollipop works for your region though in case you want to go back to Lollipop. Anyway Marshmallow is way better than Lollipop in my opinion.
---------- Post added at 07:35 PM ---------- Previous post was at 06:56 PM ----------
I suggest you stay on the chinese rom you get updates faster that way than any other region, more stable but the down side is the missing google services as you mentioned. There isn't a tested method for our device model of doing this but there is an old method that worked for another Huawei device if you are brave enough to attempt it. http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Some ideas that might make this work in theory( This can break your phone, so do this at your own risk and don't forget to backup the original files and restore the default permissions when making changes):
1- Follow the link until procedure: step 2.
2-You can try step 3 or another way i guess you can try: Revert back to an old chinese Lollipop rom on you phone, then download an asian Lollipop rom(ex: Malaysia) extract from the rom the "OEM Info File" needed. Then on your phone go to "/dev/block/hi_mci.0/by-name/" notice the location of these files might be different in you rom but they are there you have to search for them though. After finding the location of the folder copy and replace the files form the Malaysian rom to your phone. After that try to install again the same Malaysian rom and see if it works but this may break your phone. If this works you can then proceed to download a Malaysian Marshmallow rom and install it.
Just wanted to give my 2 cents :laugh:
Click to expand...
Click to collapse
سلام
Thanks a lot
I did upgrade and phone is working as fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
I have the exact same phone, bought in Portugal too. You have to use the GRA-UL10C432Bxxx builds. This is the latest build available (Marshmallow)
http://www.carbontesla.com/2016/02/huawei-p8-ul00-b317-marshmallow-update-preview-europe/
I know the title says 'preview' but it is not. It is the stable version from Huawei, and the one i am currently using.
Rashad83 said:
This is the official Marshmallow rom for the middle eastern region(C433), you will find the same download package for many countries like(Tunisia, Jordan, Algeria...). Not sure if the Russian rollback package from Marshmallow to Lollipop works for your region though in case you want to go back to Lollipop. Anyway Marshmallow is way better than Lollipop in my opinion.
---------- Post added at 07:35 PM ---------- Previous post was at 06:56 PM ----------
I suggest you stay on the chinese rom you get updates faster that way than any other region, more stable but the down side is the missing google services as you mentioned. There isn't a tested method for our device model of doing this but there is an old method that worked for another Huawei device if you are brave enough to attempt it. http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Some ideas that might make this work in theory( This can break your phone, so do this at your own risk and don't forget to backup the original files and restore the default permissions when making changes):
1- Follow the link until procedure: step 2.
2-You can try step 3 or another way i guess you can try: Revert back to an old chinese Lollipop rom on you phone, then download an asian Lollipop rom(ex: Malaysia) extract from the rom the "OEM Info File" needed. Then on your phone go to "/dev/block/hi_mci.0/by-name/" notice the location of these files might be different in you rom but they are there you have to search for them though. After finding the location of the folder copy and replace the files form the Malaysian rom to your phone. After that try to install again the same Malaysian rom and see if it works but this may break your phone. If this works you can then proceed to download a Malaysian Marshmallow rom and install it.
Just wanted to give my 2 cents :laugh:
Click to expand...
Click to collapse
I updated my GRA-UL10C433B180 to Marshmallow
meysamazizi said:
I updated my GRA-UL10C433B180 to Marshmallow
Click to expand...
Click to collapse
ماهي الطريقه التي عملت بها ؟:laugh:
aswertya said:
ماهي الطريقه التي عملت بها ؟:laugh:
Click to expand...
Click to collapse
Download the file, then extract, put dload folder in SD memory and insert to phone, go to UPDATER and choose local update, and select the file and let the phone do update in 20 minutes....
---------- Post added at 10:57 AM ---------- Previous post was at 10:56 AM ----------
aswertya said:
ماهي الطريقه التي عملت بها ؟:laugh:
Click to expand...
Click to collapse
http://consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
meysamazizi said:
download the file, then extract, put dload folder in sd memory and insert to phone, go to updater and choose local update, and select the file and let the phone do update in 20 minutes....
---------- post added at 10:57 am ---------- previous post was at 10:56 am ----------
http://consumer.huawei.com/eg-en/support/downloads/detail/index.htm?id=79323
Click to expand...
Click to collapse
سلام اطلاعات گوشی هم پاک میشه برنامه ها اس ام اس ها و ....؟
ramin9659 said:
سلام اطلاعات گوشی هم پاک میشه برنامه ها اس ام اس ها و ....؟
Click to expand...
Click to collapse
اگر از local updateقسمت settingاستفاده کنید؛ نه.
Sent from my HUAWEI GRA-UL10 using XDA-Developers mobile app
این لینکه که گذاشتید مال UL00
ستش چجوری روی ul10
نصب کردید یکم واضح تر توضیح میدید دقیقا چیکار کردید
New update foe my P8
Before update⬇
After update⬇
Sent from my HUAWEI GRA-UL10 using XDA-Developers mobile app
Sent from my HUAWEI GRA-UL10 using XDA-Developers mobile app
meysamazizi said:
View attachment 3855974
View attachment 3855975
Sent from my HUAWEI GRA-UL10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Where can i find those rom c185b361 ? ))
Can you kindly assist me with the full procedure of how you did it. I am currently facing the same problem.
Hi to all NXT-L29 owners.I have open this thread to discuss about crossflash between '''C'' versions of L29 models links with new updates in one place (full or partial) but only on completly stock situation, no root, no unlocked bootloader.
The versions we will talk about is:
L29C185
L29C432
L29C636
L29C900
My version is L29C636 and my curent rom is updated from B103 to B170, no with OTA but with full dload method
First questions that must be answer from owners(i will take as a sample my version C636:
1.If i update my ''C636'' version with exaclty the same "C636'' version NO OTA but with full rom ''dload'' method will i be able to revieve OTA updates in the future?
2.Can i update with ''dload'' method my ''C636'' with another "C432-C900-C185'' full version(with no root)?If yes what is going to be the results to my old C636 version?It will change to what ''C'' version?The global ''C900''?And ofcourse with no OTA?
3.If the above question is yes, when i crossflash from C636 to C432 do i have to find a spesific FULL C432 update to start with or any (the last one) FULL C432 update?
3.If all above can happen (from C636 update to C432 or whatever and my new ''C'' now is "C900''or what ever if i install back again the ''C636'' version(that was the version that i bought the phone) will it change ''C'' version back to normal(C636) to take OTA again?
L26C636B170 latest update with great battery, missing Huawei Health app & cloud, notiffication problem still exist.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43716/f1/full/update.zip
C185 is a african/middle east version
C432 is a european version
C636 is a asian version
C900 is a global version
The diferences is in the /cust
C185 use cust meanaf
C432 use cust eu
C636 use cust specseas
C900 include all cust
To view the cust of your mobile, you can entry in engineer mode *#*#2846579#*#* go to network information query, and later, pulse in vendor country info to display your cust.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In my case, my route of cust is /cust/hw/eu and I can use C432, but C636 and C185 isn't recommended because you can lose functions.
Enviado desde mi HUAWEI MATE 8 mediante Tapatalk
I dont even know my cust. Diditn looked at it before. Im now on C900b170 - works great.
I have a similar question... I do have this C636B103... but i'm thinking about flashing my phone to C900... BUT
1) What's the newest build? B???
2) How to flash it?
Thx for the help in advance..
SanHelios said:
I have a similar question... I do have this C636B103... but i'm thinking about flashing my phone to C900... BUT
1) What's the newest build? B???
2) How to flash it?
Thx for the help in advance..
Click to expand...
Click to collapse
The question here is can you from C636B103 flash a different coast like C900 without root?
If YES then the newest version for C900 is B170... This might be the newest from all "C" coast but the link for download is down for the moment.
If NO then the newest version for your version (C636) is the B170 that I have in first post but is older from C900B170 and doesn't solves the notifications problems
EGOiST1991 said:
I dont even know my cust. Diditn looked at it before. Im now on C900b170 - works great.
Click to expand...
Click to collapse
Does C900B170 solves all notification problems once for all?
Listening ? in
Sent from a mobile gadget
hi
i need l29c185 last update file .. pls help me ..
my phone no root no btlock. i wil use 3 button method.. (dload method..)
C185B162 is stable and fantastic battery for me
Can I flash c900 over C185
tsiglas said:
Hi to all NXT-L29 owners.I have open this thread to discuss about crossflash between '''C'' versions of L29 models links with new updates in one place (full or partial) but only on completly stock situation, no root, no unlocked bootloader.
The versions we will talk about is:
L29C185
L29C432
L29C636
L29C900
My version is L29C636 and my curent rom is updated from B103 to B170, no with OTA but with full dload method
First questions that must be answer from owners(i will take as a sample my version C636:
1.If i update my ''C636'' version with exaclty the same "C636'' version NO OTA but with full rom ''dload'' method will i be able to revieve OTA updates in the future?
2.Can i update with ''dload'' method my ''C636'' with another "C432-C900-C185'' full version(with no root)?If yes what is going to be the results to my old C636 version?It will change to what ''C'' version?The global ''C900''?And ofcourse with no OTA?
3.If the above question is yes, when i crossflash from C636 to C432 do i have to find a spesific FULL C432 update to start with or any (the last one) FULL C432 update?
3.If all above can happen (from C636 update to C432 or whatever and my new ''C'' now is "C900''or what ever if i install back again the ''C636'' version(that was the version that i bought the phone) will it change ''C'' version back to normal(C636) to take OTA again?
L26C636B170 latest update with great battery, missing Huawei Health app & cloud, notiffication problem still exist.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43716/f1/full/update.zip
Click to expand...
Click to collapse
I have no notification issue on my c636b170. Skype, what's app, Viber - all coming even when screen is off. Work just fantastic, very stable and fast. Check your settings
Отправлено с моего HUAWEI NXT-L29 через Tapatalk
Can try cross flashing! Some.works some.doesn't.
Mr.Atlantis said:
I have no notification issue on my c636b170. Skype, what's app, Viber - all coming even when screen is off. Work just fantastic, very stable and fast. Check your settings
Отправлено с моего HUAWEI NXT-L29 через Tapatalk
Click to expand...
Click to collapse
I haven't got either with all of them... I have problems with stock and 3d party mail app and only lockscreen notification, as all the rest of as that hasn't got the official update from Huawei that says about 'mails notification problems fixed".
If you make a test with stock mail app (leave phone with close screen without interruptions from SMS, calls, mails etc for more than 20 minutes and then send a mail from other source like PC) you will understand what I'm talking about....As for the settings this is the first think we all do... We have been Huawei's specialist technicials
To let everyone know....
I have just crossflash from L29V636B170 to L29C432B170 with simple dload method...everything goes very well and fast.
THE NEW CAST/VERSION IS FROM L29V636B170 TO L29C900B170 that means that you can flash C636 version with C432 but this will efect cast file so that you cant recieve OTA of C636 or C900 i suppose!!!
Lets see naw how the new rom can manage notifications!!!
tsiglas said:
I haven't got either with all of them... I have problems with stock and 3d party mail app and only lockscreen notification, as all the rest of as that hasn't got the official update from Huawei that says about 'mails notification problems fixed".
If you make a test with stock mail app (leave phone with close screen without interruptions from SMS, calls, mails etc for more than 20 minutes and then send a mail from other source like PC) you will understand what I'm talking about....As for the settings this is the first think we all do... We have been Huawei's specialist technicials
Click to expand...
Click to collapse
"Pnf no root" may be will help?
Отправлено с моего HUAWEI NXT-L29 через Tapatalk
Mr.Atlantis said:
"Pnf no root" may be will help?
Отправлено с моего HUAWEI NXT-L29 через Tapatalk
Click to expand...
Click to collapse
No.... This doesn't help....
tsiglas said:
To let everyone know....
I have just crossflash from L29V636B170 to L29C432B170 with simple dload method...everything goes very well and fast.
THE NEW CAST/VERSION IS FROM L29V636B170 TO L29C900B170 that means that you can flash C636 version with C432 but this will efect cast file so that you cant recieve OTA of C636 or C900 i suppose!!!
Lets see naw how the new rom can manage notifications!!!
Click to expand...
Click to collapse
Hi. If c185 is crossflashed with c432 will OTA work ? Is it possible to fla shed with locked bootloader and no root ? My only concern is that it looks like c432 is having newest roms. Cheers
inferpl said:
Hi. If c185 is crossflashed with c432 will OTA work ? Is it possible to fla shed with locked bootloader and no root ? My only concern is that it looks like c432 is having newest roms. Cheers
Click to expand...
Click to collapse
Νο sorry you can't... C185 stand alone.... You can only cross flash C432-C636-C10 but none of them with C185... But why worry about? C185 has all ready take B320......!
tsiglas said:
Νο sorry you can't... C185 stand alone.... You can only cross flash C432-C636-C10 but none of them with C185... But why worry about? C185 has all ready take B320......!
Click to expand...
Click to collapse
Thanks for info.
Hey guys i have C185B103 i tried to instal B580 with firmware finder and didn't work then with dload method and didn't work.... I want to install Android 7.0 what should i do
Hiii, have a question. its posible to install the twrp (or other) in this device? , don't have specific version of twrp in the web and maybe if I install other version have brick. thnks
dooremifasol said:
Hiii, have a question. its posible to install the twrp (or other) in this device? , don't have specific version of twrp in the web and maybe if I install other version have brick. thnks
Click to expand...
Click to collapse
U can't install a twrp from other device but u can make twrp for ur device.. Send me your stock recovery.. Ill make twrp for u
---------- Post added at 12:05 PM ---------- Previous post was at 12:04 PM ----------
dooremifasol said:
Hiii, have a question. its posible to install the twrp (or other) in this device? , don't have specific version of twrp in the web and maybe if I install other version have brick. thnks
Click to expand...
Click to collapse
U wont brick it if u install a wrong recovery.. But u cant boot into recovery if u installed a wrong one.. But its restorable...
cheers
Don't have the stock rom, and don't find in internet. in huawei web don't have the firmware (rom)
The phone its from a Vodafone promotion, in theory its free bud have Vodafone animation at start and end, and one app called start (no good.....) I like to clear the device like a stock device or purchased in huawei
(have boot loader unlocked with the huawei unlock number (web huawei) )
dooremifasol said:
Don't have the stock rom, and don't find in internet. in huawei web don't have the firmware (rom)
The phone its from a Vodafone promotion, in theory its free bud have Vodafone animation at start and end, and one app called start (no good.....) I like to clear the device like a stock device or purchased in huawei
(have boot loader unlocked with the huawei unlock number (web huawei) )
Click to expand...
Click to collapse
Is ur phone 3g or 4g
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
dooremifasol said:
Don't have the stock rom, and don't find in internet. in huawei web don't have the firmware (rom)
The phone its from a Vodafone promotion, in theory its free bud have Vodafone animation at start and end, and one app called start (no good.....) I like to clear the device like a stock device or purchased in huawei
(have boot loader unlocked with the huawei unlock number (web huawei) )
Click to expand...
Click to collapse
http://m.gsmarena.com/huawei_y5ii-8036.php
This mobile uhn
Romeotamizh said:
Is ur phone 3g or 4g
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
http://m.gsmarena.com/huawei_y5ii-8036.php
This mobile uhn
Click to expand...
Click to collapse
I think yes , bud black, see in the huawei web http://consumer.huawei.com/en/support/mobile-phones/huawei_y5ii_en-sup.htm (select CUN-L01)
I think L01 its the Vodafone rom and maybe its posible to install other version, not sure, I called to Vodafone and don't have idea and call to huawei and the same.
root
dooremifasol said:
I think yes , bud black, see in the huawei web http://consumer.huawei.com/en/support/mobile-phones/huawei_y5ii_en-sup.htm (select CUN-L01)
I think L01 its the Vodafone rom and maybe its posible to install other version, not sure, I called to Vodafone and don't have idea and call to huawei and the same.
Click to expand...
Click to collapse
have u rooted??
Romeotamizh said:
have u rooted??
Click to expand...
Click to collapse
no, I try with all posibles (windows, mac, android versions) and don't root , easy method not posible and maybe with twrp + supersu app its posible to uninstall Vodafone app and change the bootanimation.
download
dooremifasol said:
no, I try with all posibles (windows, mac, android versions) and don't root , easy method not posible and maybe with twrp + supersu app its posible to uninstall Vodafone app and change the bootanimation.
Click to expand...
Click to collapse
download this and send me the kernel
http://download-c.huawei.com/downlo...oadId=78464&version=320589&siteCode=worldwide
Hi Romeotamizh, I'm looking too for twrp for my device (huawei y5ii cun-u29) this is a link for stock recovery, I hope u can do somthing for me thankyou so much. device 3G, rooted and unlocked bootloader.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/detail/huawei-y5ii_lk.htm?id=91492
http://forum.xda-developers.com/android/general/mediatek-64-bit-rooting-custom-recovery-t3510695
use this thread to post
cool
leenasia said:
Hi Romeotamizh, I'm looking too for twrp for my device (huawei y5ii cun-u29) this is a link for stock recovery, I hope u can do somthing for me thankyou so much. device 3G, rooted and unlocked bootloader.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/detail/huawei-y5ii_lk.htm?id=91492
Click to expand...
Click to collapse
could u mind downloading the firmware and sending me just the recovery image i cant afford that much data
ok I founded this
HUAWEI Y5II Firmware(CUN-L22, C567B128, Sri Lanka)
HUAWEI Y5II Firmware(CUN-U29, C567B128, Sri Lanka)
http://consumer.huawei.com/lk/search/index.htm?keywords=HUAWEI Y5II Firmware&con_key5=webisearch
and donwloading cun-l22 because my cun-l01 its 4g, when have extract all you need and send in private
Hi all
Is someone have Custom Recovery working on Huawei cun-l01?
I have googled anywhere but could found anything.
dooremifasol said:
ok I founded this
HUAWEI Y5II Firmware(CUN-L22, C567B128, Sri Lanka)
HUAWEI Y5II Firmware(CUN-U29, C567B128, Sri Lanka)
and donwloading cun-l22 because my cun-l01 its 4g, when have extract all you need and send in private
Click to expand...
Click to collapse
So the firmware cun-l22 is compatible with your cun-l01 ?
Romeotamizh said:
http://forum.xda-developers.com/android/general/mediatek-64-bit-rooting-custom-recovery-t3510695
use this thread to post
Click to expand...
Click to collapse
Hello @Romeotamizh can you port custom recovery for my device its not rooted but unlock bootloder this is link my stock recovery
https://www.mediafire.com/download/2figfs97v84mv99
My device is huawei Y5 II CUN-U29C578B126
Help me please
Plz someone can upload a scatter-txt for Huawei Y5II, I need to use it for spflash tool, must be appreciated.
Hello!
Any relevant news with regards to CUN-L01 (CUN-L22?) devices? Looking for a custom TWRP recovery.
This was asked before by dooremifasol and mofazar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is the stock CUN-L22 firmware as far as it goes for these devices? If so I'll make sure to rip
the hell out of the stock ROM (launcher included) if I am given the chance with a working recovery (performance is paramount).
Cheers fellows
Barkuti said:
Hello!
Any relevant news with regards to CUN-L01 (CUN-L22?) devices? Looking for a custom TWRP recovery.
This was asked before by dooremifasol and mofazar.
Is the stock CUN-L22 firmware as far as it goes for these devices? If so I'll make sure to rip
the hell out of the stock ROM (launcher included) if I am given the chance with a working recovery (performance is paramount).
Cheers fellows
Click to expand...
Click to collapse
I made one in the past. I don´t remember exactly what version I had. Here is a TWRP maybe compatible with your device https://forum.xda-developers.com/android/help/root-huawei-y5-ii-cun-l21-l03-t3536329
Thanks SubwayChamp.
I am right now having a hard time trying for this pile of sh1te smartphone to properly enter the stock bootloader in order to unlock it. Right now this is all I see at the bottom of the screen of this piece of junk:
=> FASTBOOT mode...
FRP Unlock
Heard I have to deactivate Fastboot function from device's settings (here and there, but nowhere in the device's settings is such option.
Stuck right now it seems. If any of you have something worthwile to say please do so before I turn it into a shooting target
LoL. ̿ ̿ ̿ ̿̿'̿'\̵͇̿̿\з=( ͠° ͟ʖ ͡°)=ε/̵͇̿̿/'̿̿ ̿ ̿ ̿ ̿
Freakin' thing is I must confess having seen the right bootloader screen before while messing with it.
Cheers fellows
Barkuti said:
Thanks SubwayChamp.
I am right now having a hard time trying for this pile of sh1te smartphone to properly enter the stock bootloader in order to unlock it. Right now this is all I see at the bottom of the screen of this piece of junk:
=> FASTBOOT mode...
FRP Unlock
Heard I have to deactivate Fastboot function from device's settings (here and there, but nowhere in the device's settings is such option.
Stuck right now it seems. If any of you have something worthwile to say please do so before I turn it into a shooting target
LoL. ̿ ̿ ̿ ̿̿'̿'\̵͇̿̿\з=( ͠° ͟ʖ ͡°)=ε/̵͇̿̿/'̿̿ ̿ ̿ ̿ ̿
Freakin' thing is I must confess having seen the right bootloader screen before while messing with it.
Cheers fellows
Click to expand...
Click to collapse
Well, FRP is other thing related with a locked data for Google from old owner when it is registered a new account.
That is a piece of junk I´m totally agree, I used just for 8 days aprox and got rid of it.
To enter to fastboot mode is an easy job, I don´t remember exactly if it prompt for a code to unlock bootloader cause is a device with mtk SoC.
Just enable in developer options OEM unlock and USB debug (if developer options is disabled type 7 times in build number in "about device" section) then connect your device to pc (download first a minimal adb and install it) from the adb folder open a terminal like admin and type "adb devices" to see if pc recognices it, then type "adb reboot bootloader" (a special pre-fastboot for locked devices) (be attentive that your device will ask for granted permissions) once you are in fastboot mode just type "fastboot oem unlock" (without quotes) and if it is doesn´t ask for code just confirm the unlock option with pwr up.
Although all said you don´t need unlock bootloader to flash custom recovery so you can flash it through SPFlashTool with your scatter.txt and after to flash it first you have to do is reboot to recovery before to reboot device to avoid that be overwritten; you can put Supersu.zip in your sdcard and then flash it if you want to root it.
Global Rom is officialy out!
it turns out 9.6.4.0.OEDMIFD is a real global rom with a broken modem.
just update to newer releases that might fix the issue.
You cant just flash the global rom over an Antirollback rom as the global rom doesnt have Antirollback. (it will brick your device)
Guide to installing global rom on antirollback devices & installing global rom with fixed modem (for calls and internet) over china rom (no ARB): here
Download Links for Official Global Rom: here
Antirollback information: here
Thanks and have a great day!
omer919 said:
Hello there people!
our lovely new Mi Max 3 is now available for purchase on many websites.
These websites sell you a "MULTILANGUAGE rom" or "Global Rom".
The version that they sell is 9.6.4.0.OEDMIFD
Unfortunately this rom is FAKE / Un-Official and is dangerous for your device!
Why? because to install this shady rom they need to unlock your bootloader unofficialy and install a rom which was not originaly designed for Mi Max 3! this rom bricks some partitions of your device and may cause a lot of issues later! Some say that this rom may cause damage to the ability to flash roms and more onto your device or to move to official rom / xiaomi.eu rom
THERE ISNT ANY OFFICIAL GLOBAL ROM AVAILABLE FOR MI MAX 3 YET!
I suggest not to buy the Mi Max 3 with a "MULTILANGUAGE rom" or "Global Rom". (Please notice that some people that have asked not to install the fake rom got their devices with the fake rom even though they asked!)
Be patient and wait for official global rom from en.miui.com
Have a great day!
Click to expand...
Click to collapse
I have this rom .any solution
sintboy2020 said:
I have this rom .any solution
Click to expand...
Click to collapse
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
omer919 said:
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Click to expand...
Click to collapse
itay457 said:
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
Click to expand...
Click to collapse
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
My Max 3 comes with this so-called "Global" ROM.
I checked my bootloader and it says Unlocked. So yesterday I downloaded CN ROM and flashed it via fastboot.
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
omer919 said:
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
Click to expand...
Click to collapse
itay457 said:
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
Click to expand...
Click to collapse
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED BEFORE DOING THIS OR YOU WILL BRICK YOUR DEVICE
Fastboot roms are flashed through a special tool by xiaomi which can be found: here
You also might need adb drivers which are found: here
1. Open the drivers file and click "y" for every option that it asks for.
1. Install the fastboot tool tool
2. Download the fastboot rom that you wanna flash
3. Unzip the rom to a folder on your pc
4. Open the tool and in bottom right corner there will be 3 options, select "clean all"
5. Click on the "select" button on top left corner and head to the folder that you unziped, select it.
6. On your device enable "USB debugging", "install via USB", "USB Debugging (security settings)", and disable "verify apps over USB" (Developers options are enabled by going to "about phone" then spam clicking the "MIUI version" until it says that your are a developer. then go to "additional setting" and you will find "developer options")
7. Boot your device to fastboot mode by holding down the vol- + power key together until you see a bunny with fastboot sign.
8. Connect your device to your PC and click the "refresh" button on top right corner. (your phone should now appear in the list)
9. Click "flash" and wait until your device boots to the MI logo and 3 dots. (DONT DISCONNECT YOUR DEVICE BEFORE THAT!!!)
10. Wait for your device to boot up
11. Enjoy!
Hi, So if I buy with China ROM (Outside China - I live in Thailand) I can download and change to Global ROM once it's released?
China ROM will still get updates, though right?
Sorry for numpty question!
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Wam7 said:
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Click to expand...
Click to collapse
Check if you can install twrp, if you can its unlocked.
You may never know...
This procedure work on 128 Gb mi max 3 ?
Thank you
I ordered a one from Eternal Team on Ali before I seen this and asked them about the fake rom and the bootloader after it was sent this is the reply .....
Dear friend:
Welcome to our store . /:000
Sorry for the late reply .
It's locked . But you could use the Google play and use all the function normally . If you need use the Mi service . You need unlock it by yourself .
Please check this link:http://en.miui.com/unlock/
Best regards,
Cassie-- ET
(Working time: GMT+8, 9:00 am-6:30 pm, Mon-Fri)
So looks like the bootloader is locked and this fake rom is installed.
Great
omer919 said:
Check if you can install twrp, if you can its unlocked.
You may never know...
Click to expand...
Click to collapse
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Also looking for an answer to this, does anyone know?
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Tharg0r said:
Also looking for an answer to this, does anyone know?
Click to expand...
Click to collapse
Yes
Wam7 said:
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
Click to expand...
Click to collapse
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Thanks for the info.
omer919 said:
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Click to expand...
Click to collapse
Excellent, thanks that is much clearer.
I checked this video on youtube for checking 'locked bootloader' and also how to unlock.
https://www.youtube.com/watch?v=zL2omn9PGc4
I did not need to unlock becasue as I rightly guessed the bootloader is still unlocked. (pic attached). This is on both the Mi Max 3's that I have.
So I'll just start the process of flashing the Chinese ROM (to make sure of partition integrity) via Fastboot and then installing TWRP, and then flash the Xiaomi.eu ROM.
OK omer919, thanks to you I have flashed the Chinese MUI10 Fastboot ROM.
Unfortunately the link to the TWRP instructions is not good at the moment as the TWRP link in that thread is not working and the thread is now closed.
Do you (or anyone else) have a working link to TWRP for Mi Max 3 so I can install the Xiaomi.eu ROM?
Hi, all.
I found my old P9 lite, which i want to mod just for the heck of it. Sadly the EMUI version of it is stuck on 4.1.3 with no way to upgrade it. I recall there being a website that hosts the stock roms but it's down (it's under the cloud.huawei domain iirc)
Does anybody in the forums have a copy of the stock firmware with perhaps an update?
Build num: VNS-L21C900B157
Logan_Mac said:
C900
Click to expand...
Click to collapse
Your FW is incomplete or incompatible, C128 is regional variant of Telenor HU.
Try to install this {Mod edit}. Instructions can be found in ReleaseDoc folder.
Then, unlock the bootloader and rebrand your phone to C432 eu version. With C432 you have a real chance to upgrade to Nougat.
-Alf- said:
Your FW is incomplete or incompatible, C128 is regional variant of Telenor HU.
Try to install this {Mod edit}. Instructions can be found in ReleaseDoc folder.
Then, unlock the bootloader and rebrand your phone to C432 eu version. With C432 you have a real chance to upgrade to Nougat.
Click to expand...
Click to collapse
Thanks. the C900 is the only rom i found when i had to re flash my phone. .ru sites always have surprises/hidden gems you cant find elsewhere huh
Logan_Mac said:
.ru sites always have surprises/hidden gems you cant find elsewhere huh
Click to expand...
Click to collapse
Heh, and the fact that you have a Chinese phone does not bother you?
Your choice...
-Alf- said:
Heh, and the fact that you have a Chinese phone does not bother you?
Your choice...
Click to expand...
Click to collapse
I wasnt complaining. They are the archives of the internet at times
-Alf- said:
Your FW is incomplete or incompatible, C128 is regional variant of Telenor HU.
Try to install this {Mod edit}. Instructions can be found in ReleaseDoc folder.
Then, unlock the bootloader and rebrand your phone to C432 eu version. With C432 you have a real chance to upgrade to Nougat.
Click to expand...
Click to collapse
Okay so the C432 firmware is apparently incompatible with my phone, how do i rebrand my phone?
Logan_Mac said:
Okay so the C432 firmware is apparently incompatible with my phone, how do i rebrand my phone?
Click to expand...
Click to collapse
First of all, you must have the correct build number (i.e. the correct FW in the phone). With the C900 region you won't get the bootloader unlock code using DC-Unlocker (maybe with the PotatoNV method, I don't know).
-Alf- said:
First of all, you must have the correct build number (i.e. the correct FW in the phone). With the C900 region you won't get the bootloader unlock code using DC-Unlocker (maybe with the PotatoNV method, I don't know).
Click to expand...
Click to collapse
Done. Bootloader has been unlocked, I have written down the code from back when they provided them
I'm stuck with figuring out what to do after the C128 has been installed
Logan_Mac said:
Done. Bootloader has been unlocked, I have written down the code from back when they provided them
I'm stuck with figuring out what to do after the C128 has been installed
Click to expand...
Click to collapse
In fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
and post the results.
VNS-L21C432B141
HUAWEI VNS-L21
vendorcountry: hw/eu
i figured out how to change oeminfo at like 3AM last night, i can put the original C128 build back in if needed
-Alf- said:
Your FW is incomplete or incompatible, C128 is regional variant of Telenor HU.
Try to install this {Mod edit}. Instructions can be found in ReleaseDoc folder.
Then, unlock the bootloader and rebrand your phone to C432 eu version. With C432 you have a real chance to upgrade to Nougat.
Click to expand...
Click to collapse
Moderator Announcement
Link to androidhost.ru removed. This website is not accepted as file host on XDA.
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Moderator Announcement
Link to androidhost.ru removed. This website is not accepted as file host on XDA.
Spoiler: Screenshot
View attachment 5469023
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
if someone downloads the original Huawei FW on this site, it's at their own risk (honestly, I haven't heard of a problem in 5 years). I don't think that the link to the page will somehow endanger xda...
-Alf- said:
if someone downloads the original Huawei FW on this site, it's at their own risk (honestly, I haven't heard of a problem in 5 years). I don't think that the link to the page will somehow endanger xda...
Click to expand...
Click to collapse
That might be the case but we have our policy. And if a link/site is blocked by Malwarebytes we generally don't accept such a link/site.
Oswald Boelcke said:
That might be the case but we have our policy. And if a link/site is blocked by Malwarebytes we generally don't accept such a link/site.
Click to expand...
Click to collapse
All right, I take note. I just don't know how to help people when this is the only source of official Service FW (free)...
-Alf- said:
In fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
and post the results.
Click to expand...
Click to collapse
VNS-L21C432B141
HUAWEI VNS-L21
vendorcountry: hw/eu
i figured out how to change oeminfo at like 3AM last night, i can put the original C128 build back in if needed
-Alf- said:
All right, I take note. I just don't know how to help people when this is the only source of official Service FW (free)...
Click to expand...
Click to collapse
That's fair and I certainly acknowledge your dilemma especially as you're known to me as an always helpful member with a mindset that reflects XDA's spirit. But you also find criteria for not accepted links in rules no. 11 and 13 even if they were the only source.
Logan_Mac said:
VNS-L21C432B141
HUAWEI VNS-L21
vendorcountry: hw/eu
i figured out how to change oeminfo at like 3AM last night, i can put the original C128 build back in if needed
Click to expand...
Click to collapse
B141? How did you get that build number?
-Alf- said:
B141? How did you get that build number?
Click to expand...
Click to collapse
Okay, try this way out:
- install TWRP 3.0.2.0
- 1. google how "HuRupdater" is used
2. Download HuRUpdater
http://www.mediafire.com/file/r14sor2g4cbugzw/HuRUpdater_0.4.zip
- Download 3 .zip files VNS-L21C432B391
https://mega.nz/file/YpV1jCxS#fcKQJiasn4mQKjeW9AUeSLcSvI7at01N6ReJh6BRhCM
https://mega.nz/file/49Vj0CBD#Mv5bIEdd7mOP0QFoOGtQytcYLW9o8twh4Dmpj4b_NP8
https://mega.nz/file/gkUFHQwA#O0Xi32sWEW6R9Z0RMU7AsPmEwcvsxZOmLbWmwu39JB0
Create a new folder, put the VNS firmware (3 files) and HuRUpdater-0.4.zip at that folder. Copy this new folder to SD card.
6. In TWRP flash the folder (tap on HuRupdater_0.4.zip and swipe).
7. Follow instruction on the screen (!)
8. Factory reset in stock recovery.
-Alf- said:
B141? How did you get that build number?
Click to expand...
Click to collapse
you sent me VNS-L21C128B141 at first right, i just did an oeminfo swap
-Alf- said:
Okay, try this way out:
- install TWRP 3.0.2.0
- 1. google how "HuRupdater" is used
2. Download HuRUpdater
http://www.mediafire.com/file/r14sor2g4cbugzw/HuRUpdater_0.4.zip
- Download 3 .zip files:
https://mega.nz/file/YpV1jCxS#fcKQJiasn4mQKjeW9AUeSLcSvI7at01N6ReJh6BRhCM
https://mega.nz/file/49Vj0CBD#Mv5bIEdd7mOP0QFoOGtQytcYLW9o8twh4Dmpj4b_NP8
https://mega.nz/file/gkUFHQwA#O0Xi32sWEW6R9Z0RMU7AsPmEwcvsxZOmLbWmwu39JB0
Create a new folder, put the VNS firmware (3 files) and HuRUpdater-0.4.zip at that folder. Copy this new folder to SD card.
6. In TWRP flash the folder (tap on HuRupdater_0.4.zip and swipe).
7. Follow instruction on the screen (!)
8. Factory reset in stock recovery.
View attachment 5469109
Click to expand...
Click to collapse
Thanks, it worked. despite this being a quite common phone back in its day i wouldn't have found any of this on the web from google. (not even the zips)