Related
I have a Korean model Note 3 that I rooted a while back. Tonight I updated the firmware over Kies, everything went fine, then tried to re-root using the same method I previously used (CF Auto root). Obviously a mistake.
Now my phone is stuck on Odin Mode, displaying the "Firmware upgrade encountered an issue" screen. (It actually displays it in Korean but it's the same screen).
Here is what it says:
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
After I unsuccessfully attempted use CF Auto Root is also says "Unsupport dev_type" in red at the bottom.
The biggest problem I'm having is that I don't know what to flash. The SM-N900K seems to be an uncommon model, at least in the English speaking world. In fact, when I first rooted I couldn't find the appropriate file for this model so I used the N900 or N900s (which is another Korean model), I can't remember which.
If anyone has any suggestions for how I can fix this, it is greatly appreciated.
More
Update: I flashed the Cf Auto Root for the SM-N900S .
Now I am no longer stuck at the "Firmware upgrade encountered an error mode" but at the regular Odin download mode. Also able to access recovery mode. Still unsure of how to get my phone back track.
Update again:
Was able to install the SM-N900S Clockwork Mod. However, still unable to boot normally. Any help appreciated
Is there any chance I can get back into my phone the way it was, without losing all my data? Or will I need to do a factory reset?
Flash the latest firmware for this model
Sent from my LT26i using Tapatalk
Coolmfarshard said:
Flash the latest firmware for this model
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I am unable to find firmware for SM-N900K, and am wary that if I flash the SM-N900S firmware, it will mess up the phone somehow (they are for different carriers)
You should wipe data/cache partition/dalvik.... and try flashing a custom rom. Sees if it boots up then
Sent from my SM-N9005 using Tapatalk
I was able to install Lidroid ROM successfully, but after reboot it returns to the same Odin Mode screen as before.
dadaclonefly said:
I was able to install Lidroid ROM successfully, but after reboot it returns to the same Odin Mode screen as before.
Click to expand...
Click to collapse
I guess the only way is to wait the official firmware for sm-n900k(KT).
Can you give a picture of the screen at all.... Best bet is goto samfirmware and find the latest firmware for your phone and flash with Odin... If that don't work.. Try the sm9005 mj7 firmware. ... Though Not sure if it will make things worse or not
Sent from my SM-N9005 using Tapatalk
alom5 said:
Can you give a picture of the screen at all.... Best bet is goto samfirmware and find the latest firmware for your phone and flash with Odin... If that don't work.. Try the sm9005 mj7 firmware. ... Though Not sure if it will make things worse or not
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I can't give a picture of the screen but this is what it says:
Could not do normal boot
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
Below that there is the green Android logo and it says Downloading Mode (in Korean) and Do not turn off (in Korean)
Edit: Also, samfirmware.com does not have firmware for the SM-N900K unfortunately, only the SMN900S. Does anyone know where I can download other Korean firmwares?
If I try to flash SM-N900S Firmware my phone says the same as before, with the following at the bottom:
SECURE CHECK FAIL : sbl1
So it looks this in download mode:
Could not do normal boot
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
SECURE CHECK FAIL : sbl1
Have you tried kies since you had this error? I had problem before and it said to use kies to restore.
It looks like the bootloader... and you may have to wait until you find the original firmware. ..
What version of odin are you using? I use 3.09 ... Try that if you are on a older version.
Sent from my SM-N9005 using Tapatalk
alom5 said:
Have you tried kies since you had this error? I had problem before and it said to use kies to restore.
It looks like the bootloader... and you may have to wait until you find the original firmware. ..
What version of odin are you using? I use 3.09 ... Try that if you are on a older version.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I've tried both 3.09 and 1.85 versions of Odin. And Kies won't recognize the device, unfortunately.
dadaclonefly said:
update: I flashed the cf auto root for the sm-n900s .
Now i am no longer stuck at the "firmware upgrade encountered an error mode" but at the regular odin download mode. Also able to access recovery mode. Still unsure of how to get my phone back track.
Update again:
Was able to install the sm-n900s clockwork mod. However, still unable to boot normally. Any help appreciated
Click to expand...
Click to collapse
good stuff ...
In case anyone happens on this thread while trying to resolve a similar issue, the resolution was that I was unable to fix it on my own. I took it to the Samsung Service Center and they reinstalled the original firmware despite the Knox warranty having been tripped.
dadaclonefly said:
In case anyone happens on this thread while trying to resolve a similar issue, the resolution was that I was unable to fix it on my own. I took it to the Samsung Service Center and they reinstalled the original firmware despite the Knox warranty having been tripped.
Click to expand...
Click to collapse
Did they reset the knox for you?
Sent from my SM-N9005 using Tapatalk
sm n900k
dadaclonefly said:
I have a Korean model Note 3 that I rooted a while back. Tonight I updated the firmware over Kies, everything went fine, then tried to re-root using the same method I previously used (CF Auto root). Obviously a mistake.
Now my phone is stuck on Odin Mode, displaying the "Firmware upgrade encountered an issue" screen. (It actually displays it in Korean but it's the same screen).
Here is what it says:
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
After I unsuccessfully attempted use CF Auto Root is also says "Unsupport dev_type" in red at the bottom.
The biggest problem I'm having is that I don't know what to flash. The SM-N900K seems to be an uncommon model, at least in the English speaking world. In fact, when I first rooted I couldn't find the appropriate file for this model so I used the N900 or N900s (which is another Korean model), I can't remember which.
If anyone has any suggestions for how I can fix this, it is greatly appreciated.
Click to expand...
Click to collapse
I have the same sm n900k.. I successfuly rooted it using sm n900s..via odin.. also the CWM recovery from 900s.
Can I reroot again doing the same procedure via odin because I have unrooted it via supersu .. can I also re install CWM recovery since I updated it at Rom Manager and it show different version now.but it ia still working..
by the way can you post the link of the Lidroid rom you use for sm 900k if it worked out well..thanks!!
im about to get a Note 3 from olleh KT and it is sm-n900k version. also i have messed up a phone trying to root before and took it to kt and a few days they gave me back my phone in working order. they dont seem to care to much if u ruin your phone by software problems. but has any one found how to root note 3 sm-n900k version so i can try it out?
thedawg03 said:
im about to get a Note 3 from olleh KT and it is sm-n900k version. also i have messed up a phone trying to root before and took it to kt and a few days they gave me back my phone in working order. they dont seem to care to much if u ruin your phone by software problems. but has any one found how to root note 3 sm-n900k version so i can try it out?
Click to expand...
Click to collapse
That depends on which exact firmware version you are on.
Pop over to the Galaxy Note 3 Korean Users Thread for more info!
Try this one for SMN-N900K : http://pan.baidu.com/s/1jGA1F98
Tested to be working.
Hi all,
Hopefully someone can help?
The stock firmware for my S4 was XXUEMK9. I followed a combination of this guide:
http://forum.xda-developers.com/showthread.php?p=47227598#post47227598
and also this guide for v16:
http://forum.xda-developers.com/showthread.php?t=2372286
After rooting (CF-AutoRoot) I booted fine, then after installing these two I booted fine:
1. ODIN Flash the New Bootloader (the NAD bootloader will do)
2. ODIN Flash the I9505XXUNB8 Modem
Then I continued with the final stage of installing using Philz/Aroma, rebooted and just get stuck on
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Samsung
GALAXY S4
GT-I9505
Left for half hour and no change. Also tried repeating the final wipe/install several times, no change.
Please, is someone able to help?
Further to this I can reboot into Recovery or Download, the latter shows:
ODIN MODE
Produce Name: GT-I9505
Current Binary: Custom
System Status: Custom
KNOX Kernel Lock: 0x0
KNOX Warranty Void: 0x1
CSB-Config-LSB: 0x30
Write Protection: Enable
eMMC Burst Mode: enabled
Cant u repeat the process again or either flash stock firmware
aayushkhajuria2842 said:
Cant u repeat the process again or either flash stock firmware
Click to expand...
Click to collapse
Well I decided to try v15 instead, that went on first time? Unfortunately wifi was disabled so spend another two hours trying to get the right modem (AP + CP) installed, but finally successful.
I wonder why v16 wont go on? How odd... Anyone else had this issue?
nrps1 said:
Well I decided to try v15 instead, that went on first time? Unfortunately wifi was disabled so spend another two hours trying to get the right modem (AP + CP) installed, but finally successful.
I wonder why v16 wont go on? How odd... Anyone else had this issue?
Click to expand...
Click to collapse
Anyone had experience of this or advice?
The v15 Echoe is crashing and rebooting the phone constantly now, sometimes when it is left alone too, so will have to try something else.
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P3
SECURE DOWNLOAD : ENABLE
UDC START
I gave my note3 to a technician, there was a problem (It didn't boot, instead stuck on samsung logo with recovery booting). The technician did his best and the phone began to work. Then I used the phone once ( for 24 hours) and the same problem came back. I tried to flash it with official Rom lollipop 5.0, bootloader and CWM by Odin v3.09, but that was in vain.
I need your help please.
Waiting for your reply.
Take it back to your technician .
Suggestion is a hardware problem .
JJEgan said:
Take it back to your technician .
Suggestion is a hardware problem .
Click to expand...
Click to collapse
I did it before trying by myself to fix the problem, but not solution. If it's a hardware problem, may be I have to try with another technician. Thanks.
This is exactly the same problem I am having.
My phone is now working on stock Lollipop but I was stuck with this for a while.
I found that if i flashed the CWM .tar file with Odin it would reboot and work fine.
Once you get to that point, download a stock rom from Sammobile - I used 4.4.2 just to get it working.
When i had installed 4.4.2 everything appeared fine, i went ahead and booted into stock recovery and did a full reset.
I then let the phone update to stock 5.0 using the built in updater.
Im running it as it is (stock rom, un-rooted and stock recovery) until i can research enough into the problem and how to get around it.
In Odin mode on my phone, there is a "write protection - enabled" line also, which im guessing is causing my problem on not being able to get cwm/twrp to work
My aim was to Root, custom recovery and custom Rom but I hit the exact brick wall you posted in the OP
So I was going to trade this phone to my friend for an iPhone5c It is rooted and has a SlimPickins 5.0.1 rom. The rom was debloated and deodexed (Meaning that only the apps that make the phone work were not removed) And I then downloaded the apps that it should have come with. All-in-all, it was working perfectly until I tried to factory reset it so everything would be wiped. Now it just boots into TWRP recovery when I try to turn it on. I tried installing custom rom and it still goes to TWRP recovery. I CAN get into download mode though. Any help on how to get it to stop booting into TWRP and boot normally?
HugoOrizaba said:
So I was going to trade this phone to my friend for an iPhone5c It is rooted and has a SlimPickins 5.0.1 rom. The rom was debloated and deodexed (Meaning that only the apps that make the phone work were not removed) And I then downloaded the apps that it should have come with. All-in-all, it was working perfectly until I tried to factory reset it so everything would be wiped. Now it just boots into TWRP recovery when I try to turn it on. I tried installing custom rom and it still goes to TWRP recovery. I CAN get into download mode though. Any help on how to get it to stop booting into TWRP and boot normally?
Click to expand...
Click to collapse
I will look
HELP!!!!
HugoOrizaba said:
So I was going to trade this phone to my friend for an iPhone5c It is rooted and has a SlimPickins 5.0.1 rom. The rom was debloated and deodexed (Meaning that only the apps that make the phone work were not removed) And I then downloaded the apps that it should have come with. All-in-all, it was working perfectly until I tried to factory reset it so everything would be wiped. Now it just boots into TWRP recovery when I try to turn it on. I tried installing custom rom and it still goes to TWRP recovery. I CAN get into download mode though. Any help on how to get it to stop booting into TWRP and boot normally?
Click to expand...
Click to collapse
I have the same problem, except that install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin Mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
Sorry for the super late response. I have your fix to that. My phone did that same thing. You just need to flash the newest version of TWRP. Download this and flash it in ODIN : https://dl.twrp.me/coreprimelte/twrp-3.0.2-0-coreprimelte.img.tar
Then the phone will boot normally.
Note: DO NOT TRY TO FACTORY RESET AFTER THIS
Thank me later
Hi everyone,
Well here is my problem. For the past few weeks I've been testing custom rom for my Chinese SM-N9006. I have successfully flashed Resurrection Remix and Darklord full N5 UX N920SKSU2ZPFB.
Then I wanted to try other roms, even though they weren't supported specifically for my device...Just out of curiosity to see if it would work.
I successfully installed Purify CM13 for Hlte / T-Mo / Can -- v4.1 and Temasek's UNOFFICIAL Build v9.3. I was able to make those rom work, I could surf the internet, make/receive phone calls, send/receive sms.
The only thing that didn't work throughout both roms was that my sd card was detected but "stopped working" and when I entered the storage section of the settings, in the Temasek it was a white screen and in the Purify rom the settings app crashed. I could not backup anything with TB since the folder was on the ext sd card so I booted into twrp and try to restore the previous rom I was using, the Darklord one. That's when it happened: everything went as usual but after hitting reboot my phone went into downloading mode. On it it said:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREY: S2, T2, R2, A3, P2
SECURE DOWNLOAD: ENABLE
UDC START
Downloading... Do not turn off target!!
I want to add that I can restore my Resurrection Remix backup in twrp.
Why should I do next? Is my Darklord backup corrupted? Should I reflash Darklord rom? Can I save this backup or is it useless now?
Thanks for you help.
wongfeihung1984 said:
Hi everyone,
Well here is my problem. For the past few weeks I've been testing custom rom for my Chinese SM-N9006. I have successfully flashed Resurrection Remix and Darklord full N5 UX N920SKSU2ZPFB.
Then I wanted to try other roms, even though they weren't supported specifically for my device...Just out of curiosity to see if it would work.
I successfully installed Purify CM13 for Hlte / T-Mo / Can -- v4.1 and Temasek's UNOFFICIAL Build v9.3. I was able to make those rom work, I could surf the internet, make/receive phone calls, send/receive sms.
The only thing that didn't work throughout both roms was that my sd card was detected but "stopped working" and when I entered the storage section of the settings, in the Temasek it was a white screen and in the Purify rom the settings app crashed. I could not backup anything with TB since the folder was on the ext sd card so I booted into twrp and try to restore the previous rom I was using, the Darklord one. That's when it happened: everything went as usual but after hitting reboot my phone went into downloading mode. On it it said:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREY: S2, T2, R2, A3, P2
SECURE DOWNLOAD: ENABLE
UDC START
Downloading... Do not turn off target!!
I want to add that I can restore my Resurrection Remix backup in twrp.
Why should I do next? Is my Darklord backup corrupted? Should I reflash Darklord rom? Can I save this backup or is it useless now?
Thanks for you help.
Click to expand...
Click to collapse
Is it possible to boot into recovery mode? Maybe you use wrong Darklord Kernel?
If you can only access ODIN, then I suggest you flash an official firmware/ROM via PC Odin.
lovexda88 said:
Is it possible to boot into recovery mode? Maybe you use wrong Darklord Kernel?
If you can only access ODIN, then I suggest you flash an official firmware/ROM via PC Odin.
Click to expand...
Click to collapse
Hello, thanks for trying and helping me.
I can boot into recovery just fine and restore my previous Resurrection Remix backup. No problem in that matter.
wongfeihung1984 said:
Hello, thanks for trying and helping me.
I can boot into recovery just fine and restore my previous Resurrection Remix backup. No problem in that matter.
Click to expand...
Click to collapse
Btw, Darklord requires specific kernel. Try to install correct version of it.
lovexda88 said:
Btw, Darklord requires specific kernel. Try to install correct version of it.
Click to expand...
Click to collapse
The thing is Darklord was working really well before. It's only after trying some other roms and going back to Darklord that I encountered this problem.