ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P3
SECURE DOWNLOAD : ENABLE
UDC START
I gave my note3 to a technician, there was a problem (It didn't boot, instead stuck on samsung logo with recovery booting). The technician did his best and the phone began to work. Then I used the phone once ( for 24 hours) and the same problem came back. I tried to flash it with official Rom lollipop 5.0, bootloader and CWM by Odin v3.09, but that was in vain.
I need your help please.
Waiting for your reply.
Take it back to your technician .
Suggestion is a hardware problem .
JJEgan said:
Take it back to your technician .
Suggestion is a hardware problem .
Click to expand...
Click to collapse
I did it before trying by myself to fix the problem, but not solution. If it's a hardware problem, may be I have to try with another technician. Thanks.
This is exactly the same problem I am having.
My phone is now working on stock Lollipop but I was stuck with this for a while.
I found that if i flashed the CWM .tar file with Odin it would reboot and work fine.
Once you get to that point, download a stock rom from Sammobile - I used 4.4.2 just to get it working.
When i had installed 4.4.2 everything appeared fine, i went ahead and booted into stock recovery and did a full reset.
I then let the phone update to stock 5.0 using the built in updater.
Im running it as it is (stock rom, un-rooted and stock recovery) until i can research enough into the problem and how to get around it.
In Odin mode on my phone, there is a "write protection - enabled" line also, which im guessing is causing my problem on not being able to get cwm/twrp to work
My aim was to Root, custom recovery and custom Rom but I hit the exact brick wall you posted in the OP
Related
I have a Korean model Note 3 that I rooted a while back. Tonight I updated the firmware over Kies, everything went fine, then tried to re-root using the same method I previously used (CF Auto root). Obviously a mistake.
Now my phone is stuck on Odin Mode, displaying the "Firmware upgrade encountered an issue" screen. (It actually displays it in Korean but it's the same screen).
Here is what it says:
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
After I unsuccessfully attempted use CF Auto Root is also says "Unsupport dev_type" in red at the bottom.
The biggest problem I'm having is that I don't know what to flash. The SM-N900K seems to be an uncommon model, at least in the English speaking world. In fact, when I first rooted I couldn't find the appropriate file for this model so I used the N900 or N900s (which is another Korean model), I can't remember which.
If anyone has any suggestions for how I can fix this, it is greatly appreciated.
More
Update: I flashed the Cf Auto Root for the SM-N900S .
Now I am no longer stuck at the "Firmware upgrade encountered an error mode" but at the regular Odin download mode. Also able to access recovery mode. Still unsure of how to get my phone back track.
Update again:
Was able to install the SM-N900S Clockwork Mod. However, still unable to boot normally. Any help appreciated
Is there any chance I can get back into my phone the way it was, without losing all my data? Or will I need to do a factory reset?
Flash the latest firmware for this model
Sent from my LT26i using Tapatalk
Coolmfarshard said:
Flash the latest firmware for this model
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I am unable to find firmware for SM-N900K, and am wary that if I flash the SM-N900S firmware, it will mess up the phone somehow (they are for different carriers)
You should wipe data/cache partition/dalvik.... and try flashing a custom rom. Sees if it boots up then
Sent from my SM-N9005 using Tapatalk
I was able to install Lidroid ROM successfully, but after reboot it returns to the same Odin Mode screen as before.
dadaclonefly said:
I was able to install Lidroid ROM successfully, but after reboot it returns to the same Odin Mode screen as before.
Click to expand...
Click to collapse
I guess the only way is to wait the official firmware for sm-n900k(KT).
Can you give a picture of the screen at all.... Best bet is goto samfirmware and find the latest firmware for your phone and flash with Odin... If that don't work.. Try the sm9005 mj7 firmware. ... Though Not sure if it will make things worse or not
Sent from my SM-N9005 using Tapatalk
alom5 said:
Can you give a picture of the screen at all.... Best bet is goto samfirmware and find the latest firmware for your phone and flash with Odin... If that don't work.. Try the sm9005 mj7 firmware. ... Though Not sure if it will make things worse or not
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I can't give a picture of the screen but this is what it says:
Could not do normal boot
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
Below that there is the green Android logo and it says Downloading Mode (in Korean) and Do not turn off (in Korean)
Edit: Also, samfirmware.com does not have firmware for the SM-N900K unfortunately, only the SMN900S. Does anyone know where I can download other Korean firmwares?
If I try to flash SM-N900S Firmware my phone says the same as before, with the following at the bottom:
SECURE CHECK FAIL : sbl1
So it looks this in download mode:
Could not do normal boot
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
SECURE CHECK FAIL : sbl1
Have you tried kies since you had this error? I had problem before and it said to use kies to restore.
It looks like the bootloader... and you may have to wait until you find the original firmware. ..
What version of odin are you using? I use 3.09 ... Try that if you are on a older version.
Sent from my SM-N9005 using Tapatalk
alom5 said:
Have you tried kies since you had this error? I had problem before and it said to use kies to restore.
It looks like the bootloader... and you may have to wait until you find the original firmware. ..
What version of odin are you using? I use 3.09 ... Try that if you are on a older version.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I've tried both 3.09 and 1.85 versions of Odin. And Kies won't recognize the device, unfortunately.
dadaclonefly said:
update: I flashed the cf auto root for the sm-n900s .
Now i am no longer stuck at the "firmware upgrade encountered an error mode" but at the regular odin download mode. Also able to access recovery mode. Still unsure of how to get my phone back track.
Update again:
Was able to install the sm-n900s clockwork mod. However, still unable to boot normally. Any help appreciated
Click to expand...
Click to collapse
good stuff ...
In case anyone happens on this thread while trying to resolve a similar issue, the resolution was that I was unable to fix it on my own. I took it to the Samsung Service Center and they reinstalled the original firmware despite the Knox warranty having been tripped.
dadaclonefly said:
In case anyone happens on this thread while trying to resolve a similar issue, the resolution was that I was unable to fix it on my own. I took it to the Samsung Service Center and they reinstalled the original firmware despite the Knox warranty having been tripped.
Click to expand...
Click to collapse
Did they reset the knox for you?
Sent from my SM-N9005 using Tapatalk
sm n900k
dadaclonefly said:
I have a Korean model Note 3 that I rooted a while back. Tonight I updated the firmware over Kies, everything went fine, then tried to re-root using the same method I previously used (CF Auto root). Obviously a mistake.
Now my phone is stuck on Odin Mode, displaying the "Firmware upgrade encountered an issue" screen. (It actually displays it in Korean but it's the same screen).
Here is what it says:
ODIN MODE;
PRODUCT NAME: SM-N900K
CURRENT BINARY: Custom
CURRENT STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCKFF
KNOX WARRANTY VOID: 0X1
QUALCOOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
After I unsuccessfully attempted use CF Auto Root is also says "Unsupport dev_type" in red at the bottom.
The biggest problem I'm having is that I don't know what to flash. The SM-N900K seems to be an uncommon model, at least in the English speaking world. In fact, when I first rooted I couldn't find the appropriate file for this model so I used the N900 or N900s (which is another Korean model), I can't remember which.
If anyone has any suggestions for how I can fix this, it is greatly appreciated.
Click to expand...
Click to collapse
I have the same sm n900k.. I successfuly rooted it using sm n900s..via odin.. also the CWM recovery from 900s.
Can I reroot again doing the same procedure via odin because I have unrooted it via supersu .. can I also re install CWM recovery since I updated it at Rom Manager and it show different version now.but it ia still working..
by the way can you post the link of the Lidroid rom you use for sm 900k if it worked out well..thanks!!
im about to get a Note 3 from olleh KT and it is sm-n900k version. also i have messed up a phone trying to root before and took it to kt and a few days they gave me back my phone in working order. they dont seem to care to much if u ruin your phone by software problems. but has any one found how to root note 3 sm-n900k version so i can try it out?
thedawg03 said:
im about to get a Note 3 from olleh KT and it is sm-n900k version. also i have messed up a phone trying to root before and took it to kt and a few days they gave me back my phone in working order. they dont seem to care to much if u ruin your phone by software problems. but has any one found how to root note 3 sm-n900k version so i can try it out?
Click to expand...
Click to collapse
That depends on which exact firmware version you are on.
Pop over to the Galaxy Note 3 Korean Users Thread for more info!
Try this one for SMN-N900K : http://pan.baidu.com/s/1jGA1F98
Tested to be working.
Hi all,
Hopefully someone can help?
The stock firmware for my S4 was XXUEMK9. I followed a combination of this guide:
http://forum.xda-developers.com/showthread.php?p=47227598#post47227598
and also this guide for v16:
http://forum.xda-developers.com/showthread.php?t=2372286
After rooting (CF-AutoRoot) I booted fine, then after installing these two I booted fine:
1. ODIN Flash the New Bootloader (the NAD bootloader will do)
2. ODIN Flash the I9505XXUNB8 Modem
Then I continued with the final stage of installing using Philz/Aroma, rebooted and just get stuck on
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Samsung
GALAXY S4
GT-I9505
Left for half hour and no change. Also tried repeating the final wipe/install several times, no change.
Please, is someone able to help?
Further to this I can reboot into Recovery or Download, the latter shows:
ODIN MODE
Produce Name: GT-I9505
Current Binary: Custom
System Status: Custom
KNOX Kernel Lock: 0x0
KNOX Warranty Void: 0x1
CSB-Config-LSB: 0x30
Write Protection: Enable
eMMC Burst Mode: enabled
Cant u repeat the process again or either flash stock firmware
aayushkhajuria2842 said:
Cant u repeat the process again or either flash stock firmware
Click to expand...
Click to collapse
Well I decided to try v15 instead, that went on first time? Unfortunately wifi was disabled so spend another two hours trying to get the right modem (AP + CP) installed, but finally successful.
I wonder why v16 wont go on? How odd... Anyone else had this issue?
nrps1 said:
Well I decided to try v15 instead, that went on first time? Unfortunately wifi was disabled so spend another two hours trying to get the right modem (AP + CP) installed, but finally successful.
I wonder why v16 wont go on? How odd... Anyone else had this issue?
Click to expand...
Click to collapse
Anyone had experience of this or advice?
The v15 Echoe is crashing and rebooting the phone constantly now, sometimes when it is left alone too, so will have to try something else.
Hi, I rooted my GT-i9301i last week, disabled Knox with SuperSU, flashed CWM and installed CM11 and CM12. I unrooted and went back to stock firmware using Odin because my phone doesn't vibrate normally anymore. I wanted to know if I still had my warranty. But my phone doesn't have a flash counter. I read that with newer Samsung phones there is a Knox counter and that you can check it by going into Download Mode. But there is no 'Knox Kernel Lock' and 'Knox Warrenty Void'. Oh and it says that I have a GT-I9300I but I have a GT-I9301I. Now I don't know if my warranty is void. Hope you guys can help me.
In Download Mode I see:
ODIN MODE
PRODUCT NAME: GT-I9300I
CURRENT BINARY: Samsung Official
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, A1, P1
UDC START
You can install app "Phone INFO Samsung" (http://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo). Except others the app will also show you the status of Knox warranty void.
Some S3 Neo single SIM phones (I9301I) in Download mode incorrectly show I9300I (it is mentioned here on XDA).
Please share your results, I'm also interested what mentioned app will show re Knox status. Also could you tell me which root did you use? Thank you.
hi, mine "knox warranty void" is 0x0 ...
Consider i've changed recovery to cwm trought Odin 3.09, applied knox disabler script, applied root and saved my stock rom..
All in this order..
And then installed after a format /system and wipe data/cache, the new rom CM 12 5.02 lollipop....
Happy new year to all...
Hi l.sabatini, so if I undestand, you rooted your device according to this thread: http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840. Am I right?
And "knox warranty void" 0x0 is shown in the app I posted above or in download mode? I'm asking as some devices doesn't have this info in download mode...
if I can help, I never modded my phone and in download mode appears to me I9300I, although I have a I9301I.
mario_21 said:
Hi l.sabatini, so if I undestand, you rooted your device according to this thread: http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840. Am I right?
And "knox warranty void" 0x0 is shown in the app I posted above or in download mode? I'm asking as some devices doesn't have this info in download mode...
Click to expand...
Click to collapse
i've rooted with update super_su 2.40 made by chainfire after have flashed recovery.tar.md5 (containing cwm 6.0.5.1) trought odin 3.09..
before root i've applied knox disabler script and THEN super_su
When you have stock firmware installed back then your warranty is back! But also you need to unroot your device to avoid the warranty
my note 3 model is n9005 it's charge normaly with the notification led working 100% but when i boot it, it doesn't boot it Freezes for a second on the samsung note 3 n9005 and turn off again i tried to format it via recovery and it doesn't boot too it Freezes again on recovery booting and then to odin download mode with these massages : could not do normal boot.
ddi : mmc_read failed
odin mode
prouduct name: sm-n9005
current binary: samsung official
system status: custom
reactivation lock: 0x0
knox kernel lock: 0x0
knox warranty void: 0x0
qualcom secureboot: enable (csb)
rp swrev: s2, t2, r2, a3, p3
write protection: enable
udc start
if someone have any idea please help
make it the boss said:
my note 3 model is n9005 it's charge normaly with the notification led working 100% but when i boot it, it doesn't boot it Freezes for a second on the samsung note 3 n9005 and turn off again i tried to format it via recovery and it doesn't boot too it Freezes again on recovery booting and then to odin download mode with these massages : could not do normal boot.
ddi : mmc_read failed
odin mode
prouduct name: sm-n9005
current binary: samsung official
system status: custom
reactivation lock: 0x0
knox kernel lock: 0x0
knox warranty void: 0x0
qualcom secureboot: enable (csb)
rp swrev: s2, t2, r2, a3, p3
write protection: enable
udc start
if someone have any idea please help
Click to expand...
Click to collapse
need more information than that.
ok..
have you installed stock rom via ODIN from fresh ? or just trying to recover what is installed on the phone ?
if NOT odin then you need to flash stock rom again via odin and test again.
if YES then may be, may be it is hardware related (last option to consider).
BUT you need to do the steps above. then we can only reach on a proper solution.
dark_phoenix said:
need more information than that.
ok..
have you installed stock rom via ODIN from fresh ? or just trying to recover what is installed on the phone ?
if NOT odin then you need to flash stock rom again via odin and test again.
if YES then may be, may be it is hardware related (last option to consider).
BUT you need to do the steps above. then we can only reach on a proper solution.
Click to expand...
Click to collapse
i tried all of this but nothing worked, i even tried to fix it via samsung customer service, but they said ''you need to replace the motherbord '' so if you know what's the bad chip that's the cause of all of this i'll be thankful
make it the boss said:
i tried all of this but nothing worked, i even tried to fix it via samsung customer service, but they said ''you need to replace the motherbord '' so if know what's the bad chip that's the cause of all of this i'll be thankful
Click to expand...
Click to collapse
probably a corrupted partition due to some error.
try getting a .PIT file for N9005,
and flash it via odin along with stock rom.
1. search google -- there are various PIT files on SamMobile. Download the N9005 hlte BTU version.
2. here is another link for you
https://forum.xda-developers.com/showthread.php?t=2550823
and which version of rom are you trying flashing ?
dark_phoenix said:
probably a corrupted partition due to some error.
try getting a .PIT file for N9005,
and flash it via odin along with stock rom.
1. search google -- there are various PIT files on SamMobile. Download the N9005 hlte BTU version.
2. here is another link for you
https://forum.xda-developers.com/showthread.php?t=2550823
and which version of rom are you trying flashing ?
Click to expand...
Click to collapse
i tried (samsony) one, specifically the 5.0 lollipop official rom , here is odin when i tried flashing it with the pit file. https://photos.app.goo.gl/vGc9vBP8xDcxgYRT7 ,
the download also have these new messages : MMC: mmc_read fail
odin : flash read failure
make it the boss said:
i tried (samsony) one, specifically the 5.0 lollipop official rom , here is odin when i tried flashing it with the pit file. https://photos.app.goo.gl/vGc9vBP8xDcxgYRT7 ,
the download also have these new messages : MMC: mmc_read fail
odin : flash read failure
Click to expand...
Click to collapse
change cables. (may be cable is somehow not working properly.)
use updated ODIN version. ( you are using old version)
use this PIT file. this is TGY version. (Android 5.0)
https://forum.xda-developers.com/showpost.php?p=67773525&postcount=16
after then flash stock firmware. (preferably TGY one.)
if nothing works even now... then your mmc chip is corrupted and need to be replaced. the chip only if you can or the whole motherboard.
there is no harm in trying anything now, to revive it. so just do everything. don't lose hope. may be it will work.
dark_phoenix said:
change cables. (may be cable is somehow not working properly.)
use updated ODIN version. ( you are using old version)
use this PIT file. this is TGY version. (Android 5.0)
https://forum.xda-developers.com/showpost.php?p=67773525&postcount=16
after then flash stock firmware. (preferably TGY one.)
if nothing works even now... then your mmc chip is corrupted and need to be replaced. the chip only if you can or the whole motherboard.
there is no harm in trying anything now, to revive it. so just do everything. don't lose hope. may be it will work.
Click to expand...
Click to collapse
i tried that and the same error , so i guess then it's the emmc chip . but i still want to know the cause of it's death . do you have any idea ?!
make it the boss said:
i tried that and the same error , so i guess then it's the emmc chip . but i still want to know the cause of it's death . do you have any idea ?!
Click to expand...
Click to collapse
hmm..
that i don't know yet.
but in my opinion, if the emmc chip/motherboard is dead/corrupted/broken then it should not be detected by odin at all.
if it is being detected then it can be survived. but hey it is just an hypothesis.
imo the partition corruption chances are high like 85-95%. that can be repaired by available PIT file.
but i don't know any further than that.
and btw you didn't mentioned how it got corrupted ?
dark_phoenix said:
hmm..
that i don't know yet.
but in my opinion, if the emmc chip/motherboard is dead/corrupted/broken then it should not be detected by odin at all.
if it is being detected then it can be survived. but hey it is just an hypothesis.
imo the partition corruption chances are high like 85-95%. that can be repaired by available PIT file.
but i don't know any further than that.
and btw you didn't mentioned how it got corrupted ?
Click to expand...
Click to collapse
it's just died on me, i was changing the sim card and .... the phone won't start again , but, i'll try to re solder the chip and i'll tell you if it worked ! . thanks tho :good: :laugh:
I flashed a custom rom with root using TWRP on my note 5 and it was working fine at first. Then installed Root Switcher so that i can log into snapchat because snapchat doesnt allow rooted phones.
The ROM i installed was KHONGLOI-NOUGAT-V5
Later the next day, i restarted my phone and it got stuck in the SAMSUNG logo, i tried force restarting my phone many times but still same thing. the phone started to heat so i went into TWRP and powered off my phone. And now when i try opening my phone it just opens TWRP everytime.. Was thinking of flashing stock rom using TWRP but my laptop doesnt recognize the phone.
I tried to flash stock rom using ODIN MODE but it keeps failing.. Or did i just chose the wrong PDA/CSC ?
Here's what shows in ODIN MODE...
PRODUCT NAME: SM-N920C
CA_ TYPE: CA_2
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FAP LOCK: OFF
RP SWREV: B:5 K:0 S:1
And i was wondering if the RP SWREV is something to look at?
Is there a way to get my phone back?
Thanks in advance
Sorry i didnt realize it was a lg-g2 forum, ive posted in the android forum.. You may ignore this