Honor 8 lite software issue.erecovery option not shows. Set bricks on boot loop .It shows error 1 n 15.
Any solution.
not succes on Hi-s uite,
Memory card method not success.
Huawei firmware extractor Update.app process not success.
It shows enable OEM unlock .Set is bricked.not going to adb mode.only possible fastboot mode.fastboot method flashing not succes.it shows all commands failed.
Please any solution.
Hi
What is your phone build number?
Related
Hello
I bought a P9 Lite with Software Failure. I hoped to be able to repair it but I'm losing hope.
It's the "VNS-L21" with 16GB/2GB.
It has a bootloop.
I can enter Fastboot Mode, eRecovery and Huawei Recovery as well.
If I try to update via eRecovery "Download latest version and Recovery > Download Recovery" the P9 Lite is connecting to my Wifi but then I get the message "Getting package info Failed"
When I try to make a factory Reset via Huawei Recovery I get a red exclamation mark.
If I try a Factory Reset via Fastboot Mode it says "Command not allowed" But my P9 Lite nevertheless gets recognized if I tap "Fastboot Devices"
If I put a Firmware on my SD Card in Dload-Folder and try to force an update I get the hint "Incompatibility with current version. Please download the correct update package. I tried FW 161/ 160/ 150/ and also with Rollback FW.
Is there anything I could do?
Any help would be really appreciated.
Best regards
Michael
Louis235 said:
Hello
I bought a P9 Lite with Software Failure. I hoped to be able to repair it but I'm losing hope.
It's the "VNS-L21" with 16GB/2GB.
It has a bootloop.
I can enter Fastboot Mode, eRecovery and Huawei Recovery as well.
If I try to update via eRecovery "Download latest version and Recovery > Download Recovery" the P9 Lite is connecting to my Wifi but then I get the message "Getting package info Failed"
When I try to make a factory Reset via Huawei Recovery I get a red exclamation mark.
If I try a Factory Reset via Fastboot Mode it says "Command not allowed" But my P9 Lite nevertheless gets recognized if I tap "Fastboot Devices"
If I put a Firmware on my SD Card in Dload-Folder and try to force an update I get the hint "Incompatibility with current version. Please download the correct update package. I tried FW 161/ 160/ 150/ and also with Rollback FW.
Is there anything I could do?
Any help would be really appreciated.
Best regards
Michael
Click to expand...
Click to collapse
if i understand correctly, it never worked after you bought it?
if the phone was running a stock rom you should be able to use the update.app of the same version it was running.
the only other option is to request the bootloader unlock code from huawei and unlock the bootloader, but that only works if allow oem unlock was enabled in developer settings.
after unlocking you can try factory reset, or flash twrp, oeminfo and then use the update.app in dload on sdcard
if allow oem unlock wasn't enabled you're out of luck, but there seems to be another way. there's something called dc unlocker, that seems to be able to unlock the bootloader, but you'll have to search how it works.
I talked to Huawei Hotline. There they told me, that My P9 Lite was released for The United Arabian Emirates, initially.
My Bootloader is unlocked, already. In Rescue Mode stands:
Phone:unlocked
FRP: Locked.
I think there's no way to save my phone
Best regards
Sent from my MI 5 using XDA-Developers Legacy app
Or maybe: could someone provide me a working link to an Asian Firmware (C636) for my VNS-L21? Would be very kind
Sent from my MI 5 using XDA-Developers Legacy app
Hello,
I have a problem with my Huawei P9 Lite. Build number is: VNS-L31C900B161
Whenever I try to flash twrp using adb I get the message
"writing 'recovery'...
FAILED (remote: Command not allowed)"
My bootloader is unlocked and I just flashed a new firmware. My main goal to to switch to yet another firmware since the one I'm on right now doesn't allow me to open the Play store.
I want to switch to C432 in order to be able to update through the stock recovery (C900 firmwares are nowhere to be found) and I read in another thread that I need to flash oem info using TWRP. If anyone knows another way I'd appreciate some directions.
Oem unlock aswell as USB debugging are enabled.
I'd greatly appreciate any help.
Hello! I have a very similar problem with my P8. Unfortunately so far no one has ever been able to help me. Previously I had 2x Huawei P8 and one P9.I modified all the different methods. I've had some time to learn but this case is beyond my skill.
In my case also the bootloader - unlocked (all known methods for verifying bootloader status show that it is unlocked). Because my phone is connected to a computer running Windows 10 64b tried the methods without the driver signatures (quieter I do not think that is the problem in this because other P8 unlocked on the same computer, the same ADB drivers etc ...) I've tried adb over wifi and even these dubious methods without using a PC. Nothing. The only response: "Command not allowed ". Maybe I will add that dedicated tools type SRK Tools , HWMultitool, WinDroid ToolKit They perform a normal TWRP boot procedure and show that the procedure was successful (!!!) .... and nothing. Black magic. So far in 3 different sites they could not explain it to me.Finally, I will add that this particular P8 is a copy that I got under warranty (previous P8 unfortunately fell but honestly gave me a whole new ... But without any box, Without anything, the phone itself ... Any such blockade made in Huawei?
me2
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Same here. same country, same model. Have you solved it?
Did you find by chance the recovery?
goetzchrist said:
Did you find by chance the recovery?
Click to expand...
Click to collapse
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
merdecas said:
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
Click to expand...
Click to collapse
can you guide us how?
Hi,
Enter in fastboot and execute the following commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot reboot
You can find the stock recovery in this link:
https://mega.nz/#!0NsEVRIb!DKSqqW5H4DQX7pcyACH4cFbKQS9K8Ov1BNnLfk4sSUs
Fixing Bricked P10 Lite without TWRP , This works even if your Boot is locked
Don't worry my friend be chill, I too bricked my huawei P10 Lite Middle East Version and after a month of struggle I was finally able to fix this issue and restored my STOCK .
This video is made to help you successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
If the above video doesn't play then click on thsi link below
https://youtu.be/0vDgDXePAR4
Cheers.....
help please
merdecas said:
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Click to expand...
Click to collapse
same here , i relocked the bootloader and the mobile got stuck on the recovery mode .
please help , when i open the adb cmd with the mobile in recovery state , the adb can't see my device ,how did you load *.img files through the fastboot, guide me please
my p10+ bricked because i updated beta Oreo but now i want to return to 7.0
then i flash with boot-loader mode but my phone do not boot normally
i try to flash again but boot-loader just re-lock and i cant unlock again (i don't know why, I use same unlock code)
i cant flash boot recovery or anything else.
the phone can enter every mode erecovery, normal recovery ,download mode
i try to do everything
1. erecovery - didn't work can't install
2. normal recovery - didn't work i can't factory reset
3. dload sd card - didn't work
4. hwota - didn't work can't unlock or install twrp
5. fastboot - can't unlock,install but can see info about phone (can see build number bootinfo but can't show product model)
plz help me i wan to use my phone immediately thanks.
I assume you used FunkyHuawei to rebrand to C900 and install Android O?
If so, you can use eRecovery method to reinstall Android O.
After that, you can use HiSuite to install the other C900 build for Android N.
If you used another method, it might be impossible right now.
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Eyezcripz said:
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
fastboot devices show your device serial number.
i have same problem: Phone Relocked
FRP Lock
https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
Hello everyone a few weeks ago I was provided by a friend a p8 lite that will only boot into rescue mode or fastboot mode.Now in order for it to even boot at all it has to be connected to a power source so either pc or plug.I have tried putting an update.app in the dload folder in the sd card but no matter what it wont recognise the update and still boot into rescue mode.Its bootloader is locked and so I can not flash anything through fastboot in powershell as I get the message that my action is not allowed.I would like to know if its possible to recover from this state as iv done some extensive research and have come up with nothing. I will be waiting for any replies that can possibly help me thank you for your time