Hello
I bought a P9 Lite with Software Failure. I hoped to be able to repair it but I'm losing hope.
It's the "VNS-L21" with 16GB/2GB.
It has a bootloop.
I can enter Fastboot Mode, eRecovery and Huawei Recovery as well.
If I try to update via eRecovery "Download latest version and Recovery > Download Recovery" the P9 Lite is connecting to my Wifi but then I get the message "Getting package info Failed"
When I try to make a factory Reset via Huawei Recovery I get a red exclamation mark.
If I try a Factory Reset via Fastboot Mode it says "Command not allowed" But my P9 Lite nevertheless gets recognized if I tap "Fastboot Devices"
If I put a Firmware on my SD Card in Dload-Folder and try to force an update I get the hint "Incompatibility with current version. Please download the correct update package. I tried FW 161/ 160/ 150/ and also with Rollback FW.
Is there anything I could do?
Any help would be really appreciated.
Best regards
Michael
Louis235 said:
Hello
I bought a P9 Lite with Software Failure. I hoped to be able to repair it but I'm losing hope.
It's the "VNS-L21" with 16GB/2GB.
It has a bootloop.
I can enter Fastboot Mode, eRecovery and Huawei Recovery as well.
If I try to update via eRecovery "Download latest version and Recovery > Download Recovery" the P9 Lite is connecting to my Wifi but then I get the message "Getting package info Failed"
When I try to make a factory Reset via Huawei Recovery I get a red exclamation mark.
If I try a Factory Reset via Fastboot Mode it says "Command not allowed" But my P9 Lite nevertheless gets recognized if I tap "Fastboot Devices"
If I put a Firmware on my SD Card in Dload-Folder and try to force an update I get the hint "Incompatibility with current version. Please download the correct update package. I tried FW 161/ 160/ 150/ and also with Rollback FW.
Is there anything I could do?
Any help would be really appreciated.
Best regards
Michael
Click to expand...
Click to collapse
if i understand correctly, it never worked after you bought it?
if the phone was running a stock rom you should be able to use the update.app of the same version it was running.
the only other option is to request the bootloader unlock code from huawei and unlock the bootloader, but that only works if allow oem unlock was enabled in developer settings.
after unlocking you can try factory reset, or flash twrp, oeminfo and then use the update.app in dload on sdcard
if allow oem unlock wasn't enabled you're out of luck, but there seems to be another way. there's something called dc unlocker, that seems to be able to unlock the bootloader, but you'll have to search how it works.
I talked to Huawei Hotline. There they told me, that My P9 Lite was released for The United Arabian Emirates, initially.
My Bootloader is unlocked, already. In Rescue Mode stands:
Phone:unlocked
FRP: Locked.
I think there's no way to save my phone
Best regards
Sent from my MI 5 using XDA-Developers Legacy app
Or maybe: could someone provide me a working link to an Asian Firmware (C636) for my VNS-L21? Would be very kind
Sent from my MI 5 using XDA-Developers Legacy app
Related
My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk
Looks like a Dev ROM to me. Your bootloader is unlocked?
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone
caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.
Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Write you soon. PC crashed
I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"
HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts
goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore
http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406
Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Same here. same country, same model. Have you solved it?
Did you find by chance the recovery?
goetzchrist said:
Did you find by chance the recovery?
Click to expand...
Click to collapse
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
merdecas said:
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
Click to expand...
Click to collapse
can you guide us how?
Hi,
Enter in fastboot and execute the following commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot reboot
You can find the stock recovery in this link:
https://mega.nz/#!0NsEVRIb!DKSqqW5H4DQX7pcyACH4cFbKQS9K8Ov1BNnLfk4sSUs
Fixing Bricked P10 Lite without TWRP , This works even if your Boot is locked
Don't worry my friend be chill, I too bricked my huawei P10 Lite Middle East Version and after a month of struggle I was finally able to fix this issue and restored my STOCK .
This video is made to help you successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
If the above video doesn't play then click on thsi link below
https://youtu.be/0vDgDXePAR4
Cheers.....
help please
merdecas said:
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Click to expand...
Click to collapse
same here , i relocked the bootloader and the mobile got stuck on the recovery mode .
please help , when i open the adb cmd with the mobile in recovery state , the adb can't see my device ,how did you load *.img files through the fastboot, guide me please
my p10+ bricked because i updated beta Oreo but now i want to return to 7.0
then i flash with boot-loader mode but my phone do not boot normally
i try to flash again but boot-loader just re-lock and i cant unlock again (i don't know why, I use same unlock code)
i cant flash boot recovery or anything else.
the phone can enter every mode erecovery, normal recovery ,download mode
i try to do everything
1. erecovery - didn't work can't install
2. normal recovery - didn't work i can't factory reset
3. dload sd card - didn't work
4. hwota - didn't work can't unlock or install twrp
5. fastboot - can't unlock,install but can see info about phone (can see build number bootinfo but can't show product model)
plz help me i wan to use my phone immediately thanks.
I assume you used FunkyHuawei to rebrand to C900 and install Android O?
If so, you can use eRecovery method to reinstall Android O.
After that, you can use HiSuite to install the other C900 build for Android N.
If you used another method, it might be impossible right now.
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Eyezcripz said:
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
fastboot devices show your device serial number.
i have same problem: Phone Relocked
FRP Lock
https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
Hello everyone.
I Have Huawei P10 Lite WAS-LX1A and I accidentally bricked my device.
I was using TWRP to install a rom, and I wipped my system but the rom couldn't be installed for some reason. So I thought my TWRP Version had a problem, so I tried with bootloader to istall a new TWRP.
In adb I pressed:
fastboot flash recovery TWRP_by_GreatSlon.img
Click to expand...
Click to collapse
and then
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
But now, it doesn't load TWRP at all when I press vulume up + power button. I am stuck with out TWRP and with out an OS.
And I can't enter bootloader to install a new TWRP. Is there anything I can do?
I do have a laptop and an SD Card and my Bootloader is unlocked. Phone Unlocked and FRP Unlock are red, so maybe there is a way to save my phone please? I need help please . Sorry if I am not explaining very good and if I don't write correctly, I'ts because I am very very sad . Please someone tell me there is a way to fix it. Maybe dload? But I cannot find any file that it fits.. Thanks in advance.
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
tobelios said:
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
Click to expand...
Click to collapse
Try this.
tobelios said:
fastboot flash recovery TWRP_by_GreatSlon.img
and then
Quote:
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
you flashed twrp in recovery partition and after that, you flashed "custom_boot_decryptdata" also in recovery partition. so, twrp was overwritten. that's the reason why it doesn't work now. are you able to enter fastboot? (VOL- & power button)?
are you on emui5 or emui8?
if you can enter fastboot mode, flash twrp again.
Bricked P10 lite
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Vrockpockey04 said:
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Click to expand...
Click to collapse
Try to flash all partitions from a service rom.
I have the Same Problem. Only dark screen with fastboot connection.
(Sorry for the very late reply) I could enter fastboot using a pc, and then flashed a different twrp and costum rom.
Everything was okay. But, lately my rom started having network problems and I decided to flash an another rom..
But when I did, something wrong happened and now I am without twrp, without rom and with phone and frp locked.
My destiny is to brick my device and go to imposimple position, isn't it? I don't have my unlocked code so I cannot unlock my bootloader. I paid and tried dc unlocker to unlock my phone, but after plug-unplug it stopped being unlocked again and my money for dc unlocker gone for nothing and I am not willing to pay again for something like that. Any ideas to unlock my phone?
I sent an email and message to Huawei to see if they can give me the code, but idk if they will do. Any suggestions?
This post can be locked. This thread continues here. As for the Huawei, they respond that they don't give the unlock code anymore..
Hey guys,
I turned on my phone after years and I saw it's stuck on rescue mode with errors number 1 (security verify failed) & 10 (boot image).
I was able to go to eRecovery and Fastboot only.
Wiping data and factory reset through eRecovery didn't fix the problem and also I couldn't flash the whole rom using dload mode.
Then I checked fastboot and found out the bootloader was locked. After doing my research, I unlocked the bootloader using PotatoNV and testpoint. Then I could only flash some images like boot, system, recovery & cust. Not other images. Problem remains. Then I used testpoint mode and I was able to flash most of the images like HIFI etc, but nothing changes yet
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Its firmware is C185B572. I can flash this version images using fastboot only. Others go to prim vrl failure.
Also flashed TWRP for using that but can't go to it at all.
I don't know what to do anymore
Any help would be appreciated.
Decterox said:
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Click to expand...
Click to collapse
Hello!
I’m having the same issue (I haven’t unlock the bootloader though) as you and sadly don’t have any solution yet.
However, what’s this "Huawei samrtphone multi-download" and "IDTML"?
I do have some (hopefully!) compatible ROM that I’m willing to try with SP Flash Tool.