Upgrade 2DIN Android Auto 2GRAM, Bosion - Android Head-Units

Hi guys,
I have a 2DIN Bosion/chinesse head unit for Ford Mondeo MK4 for about one year with an older version of Android, 6.0. I would like to install a newer version, 8.1 firmware or higher would be great, that can also have the steering wheel controls.
2DIN Specifications:
For Vehicle Brands/Model:Ford
Display Size: 7"
TF/Micro SD Slot: 2
ROM: 32G
RAM: 2G
Operating System: Android 6.0
Screen: 1024*600 Capacitive touch screen
CPU: Quad Cortex
This is the exact product, but with Android 6.0:
https://www.ebay.com/itm/Android-7-...For-Ford-Focus-Mondeo-Galaxy-CAN/112410311610
Thank you very much for your time!

oliviu said:
Hi guys,
I have a 2DIN Bosion/chinesse head unit for Ford Mondeo MK4 for about one year with an older version of Android, 6.0. I would like to install a newer version, 8.1 firmware or higher would be great, that can also have the steering wheel controls.
2DIN Specifications:
For Vehicle Brands/Model:Ford
Display Size: 7"
TF/Micro SD Slot: 2
ROM: 32G
RAM: 2G
Operating System: Android 6.0
Screen: 1024*600 Capacitive touch screen
CPU: Quad Cortex
This is the exact product, but with Android 6.0:
https://www.ebay.com/itm/Android-7-...For-Ford-Focus-Mondeo-Galaxy-CAN/112410311610
Thank you very much for your time!
Click to expand...
Click to collapse
Hallo,you found the firmware?? I need the same

Mb12345 said:
Hallo,you found the firmware?? I need the same
Click to expand...
Click to collapse
The same is not the same...
You need to provide screenshots from "About Tablet" or similar, which shows the current installed MCU and Firmware.

rigattoni said:
The same is not the same...
You need to provide screenshots from "About Tablet" or similar, which shows the current installed MCU and Firmware.
Click to expand...
Click to collapse
This is my

Mb12345 said:
This is my
Click to expand...
Click to collapse
This is NOT the same unit. Its a STM32 with Android 11 as visible in your photo... What do you expect here???

I have the problem.
Unfortunately, the radio still doesn't show the name of the station and I can't change the memory location of the station.
With the canbus I had to swap the two cables (7 canrx 13 cantx). Now the display is in the car work and i can see all. With the two sdcarten only the map slot work not work the other. The reversing camera only shows black and white, no more color. no matter what setting.

rigattoni said:
This is NOT the same unit. Its a STM32 with Android 11 as visible in your photo... What do you expect here???
Click to expand...
Click to collapse
This i Install.
2610pro - Google Drive
drive.google.com

rigattoni said:
This is NOT the same unit. Its a STM32 with Android 11 as visible in your photo... What do you expect here???
Click to expand...
Click to collapse
and this.
please install the config file
https://drive.google.com/file/d/1Iona_Tj7IkkcJg_MjkhK0wrd6BmSqwcK/view?usp=sharing, https://drive.google.com/file/d/1sbCcMqJcq9-6I8yBU_GAZ4X487ovW7jC/view?usp=sharing

Mb12345 said:
This i Install.
2610pro - Google Drive
drive.google.com
Click to expand...
Click to collapse
TBH, I will not download these files...
Who sent you these files? The seller? In this case: Get in contact and tell them that you have issues. If you got these files from elsewhere... Set it back to factory and get in contact with the seller.
BTW: There are a lot of threads about your MCU "STM32", please use the search and read around

rigattoni said:
TBH, I will not download these files...
Who sent you these files? The seller? In this case: Get in contact and tell them that you have issues. If you got these files from elsewhere... Set it back to factory and get in contact with the seller.
BTW: There are a lot of threads about your MCU "STM32", please use the search and read around
Click to expand...
Click to collapse
Yes i become this from the Firma. Now All work perfekt. Only the Radio but is it okay.

Mb12345 said:
Yes i become this from the Firma.
Click to expand...
Click to collapse
Search for the MCU in this forum and tell the seller that you have issues. This unit is quite new... so send the unit back if they are not able to get it running.

Thx.

Related

[Q] Help rooting Pumpkin Quad-core Android 4.4 Kitkat Car Stereo

I just bought an Android head unit from Pumpkin Audio http://www.autopumpkin.com/new-products/pumpkin-quad-core-android-4-4-kitkat-car-stereo-double-din-6-2-inch-in-dash-gps-navigation-system-support-3g-wifi-odb2-dvr-air-play-7-color-button-indicator.html
Everything's working fine for the most part but I want to root it to fix a few minor inconveniences. Pretty much the same issues most people have around here(connect to my OBD2 bluetooth device, map steering wheel buttons for 3rd party applications, etc) but I can't find any information on how to root it or even any ROMs for this head unit or it's CPU.
Does anybody know If/how I can root this or even install a new ROM (I don't mind either one)?
Thinks in advance.
You will want to start by reading this thread, paying attention to the details on the first post.
http://forum.xda-developers.com/showthread.php?t=2660662
You can install any of the pre-rooted ROMs that match up to your CPU(RK3188) and screen resolution(800x480).
JPS11 said:
You will want to start by reading this thread, paying attention to the details on the first post.
http://forum.xda-developers.com/showthread.php?t=2660662
You can install any of the pre-rooted ROMs that match up to your CPU(RK3188) and screen resolution(800x480).
Click to expand...
Click to collapse
Thanks for your reply. I had seen that thread before but didn't see any ROMs for RK3188. There are some in the repos mentioned there but the rooted ones are either for RK3066 or just don't say which CPU they're for. The closest I've found is on the list of Boo's ROMs on the Custom section of the Google Drive repo which says it's KK4.4.4 and rooted but it doesn't say if it's for RK3066 or RK3188. Am I missing something?
Also, I don't know yet if my unit is KGL, Klyde, RoadMaster, GS, JY or MD yet. For what I gather from your post, I can install any ROM as long as it's for the right CPU so, Assuming Boo's ROMs are for RK3188, I don't need to bother checking which kind of unit I have, am I right?
Search the Threads updated ROMs by Malaysk and DSA3810
http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068
http://forum.xda-developers.com/showpost.php?p=60981864&postcount=13137
Ah! Now this is the stuff. Thanks a lot JPS11. I'm looking forward to a few hours of sitting in my drive way
War-Rasta said:
Ah! Now this is the stuff. Thanks a lot JPS11. I'm looking forward to a few hours of sitting in my drive way
Click to expand...
Click to collapse
Been there, done that! Wife thinks I am crazy!
---------- Post added at 11:19 PM ---------- Previous post was at 11:02 PM ----------
War-Rasta said:
Also, I don't know yet if my unit is KGL, Klyde, RoadMaster, GS, JY or MD yet. For what I gather from your post, I can install any ROM as long as it's for the right CPU so, Assuming Boo's ROMs are for RK3188, I don't need to bother checking which kind of unit I have, am I right?
Click to expand...
Click to collapse
Make sure you match up your CPU(RK3188) and screen resolution(800x480) and you will be fine!
Same for me with the GF. I'll try Malaysk's ROM tomorrow and see how it goes.
War-Rasta said:
I just bought an Android head unit from Pumpkin Audio http://www.autopumpkin.com/new-products/pumpkin-quad-core-android-4-4-kitkat-car-stereo-double-din-6-2-inch-in-dash-gps-navigation-system-support-3g-wifi-odb2-dvr-air-play-7-color-button-indicator.html
Everything's working fine for the most part but I want to root it to fix a few minor inconveniences. Pretty much the same issues most people have around here(connect to my OBD2 bluetooth device, map steering wheel buttons for 3rd party applications, etc) but I can't find any information on how to root it or even any ROMs for this head unit or it's CPU.
Does anybody know If/how I can root this or even install a new ROM (I don't mind either one)?
Thinks in advance.
Click to expand...
Click to collapse
there are a couple of ROM on this thread http://forum.xda-developers.com/and...n-quadcore-t3095354/post60424308#post60424308
i have a PUMPKIN Quadcore RK3188 800x480 - MCU 2.51, flashed with Malaysk Rooted ROM, this ROM have all that you need to control your stereo, you can use the XposedMTC to change the steering wheel button actions.
KD-C0410
Hi guys,
is RK3188 good for this one, too?
Pumpkin Car Stereo Pure Android 4.4 Kitkat DVD Player Radio Head Unit 7 Inch HD Capacitive Touchscreen With GPS/Can-Bus/3G/WIFI/7 Color Button Indicator/ Remote Control For Opel Vauxhall Vehicle
I may not post external links right now
Waldorfer said:
Hi guys,
is RK3188 good for this one, too?
Pumpkin Car Stereo Pure Android 4.4 Kitkat DVD Player Radio Head Unit 7 Inch HD Capacitive Touchscreen With GPS/Can-Bus/3G/WIFI/7 Color Button Indicator/ Remote Control For Opel Vauxhall Vehicle
I may not post external links right now
Click to expand...
Click to collapse
the KD-C0410 model uses a DUAL CORE Processor RK3066, you can't use RK3188 ROM's, the RK3188 is a QUAD CORE processor.
in this thread you can find all the development for the RK3066 http://forum.xda-developers.com/showthread.php?t=2660662
also remember that most of Pumpkin stereos are made by KLYDE, so you will not find the name Pumpkin look by KLD
bkader said:
there are a couple of ROM on this thread http://forum.xda-developers.com/and...n-quadcore-t3095354/post60424308#post60424308
i have a PUMPKIN Quadcore RK3188 800x480 - MCU 2.51, flashed with Malaysk Rooted ROM, this ROM have all that you need to control your stereo, you can use the XposedMTC to change the steering wheel button actions.
Click to expand...
Click to collapse
That's exactly what I ended up doing. Malaysk's ROM has been working fine so far since I flashed it on saturday and I was able to change/fix everything I needed.
thanks!
Do any of you know if the ram can be upgraded in these Chinese head units? I know inside the Joying head unit there is what looks like a ddr3 ram slow. I am unsure if the Pumpkin variant has one as well.
If it does, in theory it should be able to be upgraded.
I asked the Pumpkin Auto people if this was possible and they said no. I am thinking they may have said this cause the want the buyer to buy the ram from them instead of using a 3rd party stick of ram.
Anyone care to weigh in on this?
please delete, sorry
Pumpkin car multimedia 5.1
Hi everyone!
I have the specific device with 5.1 installed:
Pumpkin Universal 7 Inch 1024*600 Android 5.1 Touchscreen Quad Core Double Din Car Stereo GPS Navigation System support DAB+ AV Output 3G Wifi OBD2 Steering Wheel Control - SKU: 11-RQ0264E-US-A
I saw an updated version of android 6:
Pumpkin 7" Touchscreen Quad-core Android 6.0 Marshmallow 2 Din Car Stereo & RAM 2GB 1024*600 AV Output Bluetooth 4.0 Steering Wheel Control OBD2 WIFI/3G internet - SKU: CN01-02202B
And this one, also with 1 GB ram as mine:
Pumpkin Android 6.0 Universal Car DVD Player/stereo/radio - SKU: CN10-02201B-US-A
What options do I have to update, either to android 6 (at least, if not to 7) to manufacturers version (perhaps the rom of the second one?) or which are my option in general so to update to newer android version?
Thanks in advance!
Any root for pumpkin 7.1 2g ram 32g ROM ultra Octa Core thanks
Looking for a pre-rooted ROMs that match up to your CPU(RK3188) and screen resolution(800x480). All the links I click on are dead. Can someone send me a working like it would be appropriated greatly..
thanks

Change firmware

Hello,
I bought a chinese android head unit, i can't find any other hu that has the same MCU or android version.
The problem is that it's looks like the seller locked or hide many features for example connecting an external micor changing the screen theme.
I want to install another firmware on that device but i couldn't find a firmware that fits the same hu i have:
Mcu: HW8227L-3.3-SW0-1.3
Andtoid: YT9218C_00005_V002_30181025_HIFI
System: android 8.1 go
Kenel: 3.18.22
Cpu: A7 1.3Ghz*4
Rom: 16G
Ram: 1G
Radio: nxp6851
Build number: android-trunk-m0.AC8227L.V1.0
Can someone help me find a firmware that fits and they way to do so?
Or at least know what to look for ?
Nissansw said:
Hello,
I bought a chinese android head unit, i can't find any other hu that has the same MCU or android version.
The problem is that it's looks like the seller locked or hide many features for example connecting an external micor changing the screen theme.
I want to install another firmware on that device but i couldn't find a firmware that fits the same hu i have:
Mcu: HW8227L-3.3-SW0-1.3
Andtoid: YT9218C_00005_V002_30181025_HIFI
System: android 8.1 go
Kenel: 3.18.22
Cpu: A7 1.3Ghz*4
Rom: 16G
Ram: 1G
Radio: nxp6851
Build number: android-trunk-m0.AC8227L.V1.0
Can someone help me find a firmware that fits and they way to do so?
Or at least know what to look for ?
Click to expand...
Click to collapse
i bought exactly same ****, and i have problems with sound of apps, spotify, waze, etc
you had any solution?
cotelomoto said:
i bought exactly same ****, and i have problems with sound of apps, spotify, waze, etc
you had any solution?
Click to expand...
Click to collapse
No, all apps work for now pretty good.
I can't find a way to fix the mic of the stereo though
And change the home screen to make it more convenient.
I tried agama luncher but it get stuck almost every time it turns on
Try factory settings, Code 8888, others >>> mic sensitivity. Work ed for me. Alternativ use mtk engeneer from market
criszz said:
Try factory settings, Code 8888, others >>> mic sensitivity. Work ed for me. Alternativ use mtk engeneer from market
Click to expand...
Click to collapse
What did you change the mic sensitivity to exactly?
I have this head unit and the mic is whisper quiet on recordings or phone calls.
Firmware
I am searching for the stock rom for similar device, yt9217 and yt9218 both are stamped on the board. Processor AC8227
Okisub said:
What did you change the mic sensitivity to exactly?
I have this head unit and the mic is whisper quiet on recordings or phone calls.
Click to expand...
Click to collapse

PEN-HUI head unit

Hi,
I bought DAFYT-8712T unit from PEN-HUI for Dodge Dart. It is intended for Fiat Viaggio and Dodge Dart. At some point Can-BUS connection between radio and TFT instrument cluster stopped working. Steering wheel buttons do work, but clock on TFT cluster is now stuck at 12:06AM and radio channel is stuck at 87.5 A1. So radio does not update these anymore. I have tried to find correct config info and car selection combo but none of those seem to work. Can anyone tell me what is wrong? Can I upgrade to a better firmware? Image for that somewhere?
System V8.3.2_20180528.16457_PH-TW2-CarPlay
MCU T5.3.19-23-844-E43101-181107
Android 7.1.1
QuadCore-T3
I have pics in photobucket but cannot post because I am new user
Tero
Tero
What did the reseller suggest to resolve?
marchnz said:
What did the reseller suggest to resolve?
Click to expand...
Click to collapse
Their suggestion is:
"Sorry I do not know what you mean"
Tero

PX5 MTCE Android 10 - WiFi Connectivity / Stability Issues

Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
snailer said:
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
Click to expand...
Click to collapse
I can't find my exact seller listing but below link is a similar eBay listing for the same model I have got.
Peugeot 407 Android 10 PX5 4-64
Yes, it integrates seamlessly with canbus / climate control etc. It comes with a canbus connector. There's an option to connect reverse camera if you want to. But you have to buy the reverse camera separately. Other than that there's a GPS antenna, built in and extra microphones for phone calls, memory card slot, USB slots etc.
I wouldn't recommend any sellers for this kind of after market head units as they are all sold / shipped by overseas / international sellers. There's always a risk with this type purchases. So proceed with caution. If you end up getting a good unit, the risk is well rewarded. Your Pegueot gets a major upgrade.
All the best!
Thanks!
I've been looking at these ones.
Still undecided
Might just get a new mfd screen & keep using my phone!
plamenangelov said:
I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
Click to expand...
Click to collapse
Maverickky said:
I have the same problem, any solution?
Click to expand...
Click to collapse
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
gratnak said:
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Hello there,
See this workaround.
Custom ROMs such as @Hal9k_ 's Mod V5 have workarounds for this under Mod settings. In that ROM, go to Mod settings, select "Hardware settings" and toggle on the "Reset USB devices when booting or waking up".

Dayo SA102 Android Auto/CarPlay Update

Looking for an file to update my Dayo SA102 Android Auto/CarPlay DVD car radio head unit sold on Amazon in 2019. My Pixel 6 Pro is having connection issues and also steering wheel controls are faulting out. I took a picture of system screen. Thank you in advance for any help.
poultski75 said:
Looking for an file to update my Dayo SA102 Android Auto/CarPlay DVD car radio head unit sold on Amazon in 2019. My Pixel 6 Pro is having connection issues and also steering wheel controls are faulting out. I took a picture of system screen. Thank you in advance for any help.
Click to expand...
Click to collapse
Is it an FYT unit?
I'm not quite sure but found my instructions to the radio with these stats
poultski75 said:
I'm not quite sure but found my instructions to the radio with these stats
Click to expand...
Click to collapse
Not fyt. Probably not Android either, but I've requested a moderator move to (Android head-units) forum

Categories

Resources