I need some advice on a nameless android head unit - Android Head-Units

Hello everyone,
I recently purchased an Android Double Din Head unit, no name, with the following characteristics :
- Android 7.1
- K6_01_MH
- System : android K6_01_MH_V2.0.1_20180925
- MCU : CM_18.08.11_10.37
- APP : MT1002_V1.0.9
I was wondering if there was a better ROM that would be compatible with this head unit (please check attachements) since this one is really basic and, quite frankly, UI is really bad.
Thank you so much in advance.
Cheers all.

Related

What device do you own?

Id like this thread to assist in identifying individual Android Powered Head Units. It would be helpful if you can add what device you own in a similar fashion to below. I believe it may assist in the 'Can I install this on my device?' posts.
My unit is:
Eonon G2110F (http://www.eonon.com/Android-Car-GPS/2-Din-GPS-Navigation/G2110F.html)
MTCB - KLD2 - RK3188 - 800x480 - 4.4.4
I have updated to MTCC-KLD6-2.96-5.1.1, it can be updated using ROMS from the MTCB thread.
Please post something similar of your devices.
good idea
My unit is:
Joying - JY-JL001 - https://www.amazon.com/Challenger-W...F8&qid=1475161690&sr=8-1&keywords=jeep+joying
MTCD - RK3188 - 800x480 - 5.1.1
I updated to Malaysk V4 for MTCD, but have since gone back to the mid-August Joying update
Thanks mate,
this doesnt really work if no one posts their unit details.

Help identify MCU version (PX6)

Hello,
can someone help me to identify the MCU version of my PX6 unit?
I would like to install a mod rom like Malaysk but I can't understand if it is compatible.
This is what is reported in the system info:
MCUVer: DH191029T412188X600000000
FameworkVer: 9 PQ2A.190305.002 eng.work220191220.100202
AndroidVer: 9
APPVer: 2019122301T_1280x480_970
Nandflash: 21.42/22.52G
RAM: 4G
Resolution: 1280x480
Thank you
Hey,
I also have the same unit, (but 2GB) and looking to find the Factory Settings code...
Seller told me "3368" - No, this is a wrong password .
if someone knows, can you please reply?
link46 said:
Hello,
can someone help me to identify the MCU version of my PX6 unit?
I would like to install a mod rom like Malaysk but I can't understand if it is compatible.
This is what is reported in the system info:
MCUVer: DH191029T412188X600000000
FameworkVer: 9 PQ2A.190305.002 eng.work220191220.100202
AndroidVer: 9
APPVer: 2019122301T_1280x480_970
Nandflash: 21.42/22.52G
RAM: 4G
Resolution: 1280x480
Thank you
Click to expand...
Click to collapse
No there is no single custom ROM available.
Should have been really easy to verify that yourself...
Yours is called DH191029
You don´t have a MCU named: MTCD, MTCE or STM32
Neither of these MCU matches yours...
Hi rigattoni, it might be some custom Chinese SoC?
It looks it’s still ARM... Hm, does DH-1666 tells you anything? They sell it as 4 or 6 core 1.6GHz. Looks like a ref design with custom LCD config.
Anyway, ideas where to search (except of gooogle) would help.
Thanks
alliv2000 said:
Hi rigattoni, it might be some custom Chinese SoC?
It looks it’s still ARM... Hm, does DH-1666 tells you anything? They sell it as 4 or 6 core 1.6GHz. Looks like a ref design with custom LCD config.
Anyway, ideas where to search (except of gooogle) would help.
Thanks
Click to expand...
Click to collapse
SoC may be not, but the "underwear" is different with other MCU.
...and sorry, I have no clue about these units.
Hi all,
I've found a password for "Factory Settings", it is "1314".

Telefunken Tices-719BTS Android Head Unit Update

Hi Everyone
I have a telefunken tices-719btgps Double Din Android Head Unit for my truck. I am pretty sure this is a generic rebranded unit and currently running Android 5.1.1. As seen in the pictures below is all the info i have about this head unit and want to try and upgrade it to a later version of Android or a more stable version with better functionality. However when checking / googling the MCU version i cant seem to find anything online. I have had my fair share of experience with Android Tablets and Devices but never tried to upgrade a head unit. Can anyone give me advice on how to get the correct image or where to find it by the information below.
There is absolutely no support for this unit online or from Telefunken. Any help would be appreciated.
Ok forum does not want me to post images so ill list the info below:
Android Version - 5.1.1
CPU Info - Intel Atom 4QuadCore, GPU4D: Mali-450 MP4
System Info - APP 1024x600 2016-11-01 14:51:40
MCU Version - 2016-11-23 15:55:14 WK_(NOR)_90_C9_R76_V1.00719TA
BT Version - 5.1.1-eng.gogo.20161025.100433-22
CAN Version - Unkown
From The system updates screen:
MCU Version - 20161123155514
OS Version - 40041
APP Version - 201611011451
CAN Version - 2131298980 Latest Version
Hi, not an MTCx unit, so unlikely anyone reading here know your unit. Requesting mod moves to Android Head units section.
Suggest taking a little more time to search for your headunit, try searching for text portions of your MCU type and you might find discussion/posts for your unit.
E.g. 90_C9_R76

UI apps FF-5000 8227L firmware

Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.
albertoak said:
Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.
Click to expand...
Click to collapse
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.
Then , when updated , go to factory menu with pin code 8888 and adjust settings for device (RADIO MENU , OTHER, DISPLAY and TOUCH STUDY/CANBUS - these two menus - if you must make steering wheel command s to work.).
FOR RADIO MENU :
- if radio.app is stalling or freezes - set OSCILACION to 9,20, FM and AM sense to 21-27, RDS ON, IC TYPE is your chip of radio (do not change that as these if wrong will freeze radio and commands), SORT is RADIO FREQ
- if radio freezes after bootup and wont response at all - try this app :
(just download file and transfer to device, then get in APK installer and install radio from this apk file)
Anton TNT said:
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.
Click to expand...
Click to collapse
Thank you. But I'm looking for the UI in the photo of the first post. do you know what version it is?
It's UI3 - Ver. 7 - android 10
Anton TNT said:
It's UI3 - Ver. 7 - android 10
Click to expand...
Click to collapse
where can i get it?
albertoak said:
where can i get it?
Click to expand...
Click to collapse
This is the link above (inside youtube video) - read... Click on youtube open in youtube, go to comment area just below (unhide) and download from link there -> ►https://bit.ly/3n3XRWc
Anton TNT said:
This is the link above (inside youtube video) - read...
Click to expand...
Click to collapse
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.
albertoak said:
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.
Click to expand...
Click to collapse
well then, I have a two more... just wait will share link (its uploading to my googledisk - about 15 min)
Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing
Anton TNT said:
Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing
Click to expand...
Click to collapse
friend. it is another UI that you send me. I keep telling you that I am looking for this UI:
albertoak said:
friend. it is another UI that you send me. I keep telling you that I am looking for this
Click to expand...
Click to collapse
I didn't realize , ok, but I will look for this specific firmware for you.
Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another?
albertoak said:
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another
Click to expand...
Click to collapse
There is no need to extract anything, firmware is somewhere on this forum or somewhere on clouds services , we just have to find it on net.
Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html
Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
Anton TNT said:
Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html
Click to expand...
Click to collapse
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?
albertoak said:
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?
Click to expand...
Click to collapse
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.
Anton TNT said:
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.
Click to expand...
Click to collapse
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?
albertoak said:
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?
Click to expand...
Click to collapse
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?
Anton TNT said:
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?
Click to expand...
Click to collapse
How can I see if it is fake android 10? In device information it appears as android 10.

F8227L issues

Hello everyone, first of all, I use a Google translation because I'm a little bad in English, sorry for the mistakes.
I bought an Android headunit last year and I'm going absolutely crazy :
- I have bluetooth problems. Sometimes on startup it just won't turn on so I have to restart the machine
- Can't have app shortcut with radio so with custom launchers I can't have radio in one interaction (Or just with the widget which is really ugly...)
- Sometimes the settings go back to original, which forces me to set everything up again
I of course asked the seller several times if there was a more recent update and never got a response.
Here are the technical specifications:
HMI : TSKJ.D.Q.F.3.C04.2021.04.01.08.30
MCU : AF907.191114(H)
MEDIA : HC_v2.0.0_200416_0930(v1.84)
Android version : 10
API Level : 29
Security Patch Level : 2019-10-05
Build ID : FF_8227L_10
Model : FF-5000
Manufacturer : alps
Hardware : ac8227l
RAM : 2go
Internal Storage : 12go
Processor : ARM Cortex-A7 @1.12ghz 4 cores
After some research here, I feel like I got ripped off on the headunit.
Does anyone have a version with a more recent update of this headunit ?
Is it possible to upgrade this headunit by changing its motherboard for example ?
Thanks in advance.

Categories

Resources