Okay I have the T-Mobile version of the OnePlus 6t and the bootloader is unlocked and it's rooted running the stock ROM. I installed substratum but nothing works I put busy box in also just in case. Will substratum work with the stock ROM?
yep, works just fine, with no busy box needed
I noticed subs stopped working for me after I clean flashed stock OOS.
Haven't changed anything but only a handful of overlays show up after a reboot
you know you have to be rooted for Subs to work on this phone..
wase4711 said:
you know you have to be rooted for Subs to work on this phone..
Click to expand...
Click to collapse
My phone is rooted and none of the overlays work. Do I have to use an older version of substratum?
Flash1959 said:
My phone is rooted and none of the overlays work. Do I have to use an older version of substratum?
Click to expand...
Click to collapse
Oh and it's rooted with magisk 18.1
mine is too..
not every subs theme will work on this phone; try Valarie, I really like that one, and I know it works on this phone
remember, you first "build and enable" the things you want to theme, making sure you are using mods that work on 9.0.
then, after you build the theme, you reboot; once it boots, go back into subs app, and "enable" everything you just built; the changes should happen right then, and the theme should be installed and working.
More info in the Subs thread here on XDA, but that works for me every time..
Yap, follow the steps what @wase4711 says. Before that, make sure that you haven't installed any Magisk Doze Modules, this may affect is enabling the theme. If you have already Installed any Magisk modules, try by Uninstalling them and then apply the Theme, Once you have applied the theme, you can Install the Module's back. You can also use Pitch Black Theme, and It also works perfectly with OP6T.
Related
I must say my hat's off to EDT and Trigger. I've been running 2.6.4 for a couple days and it so far has been the best ROM I've flashed. Only thing I don't like is the battery icon. So I went back to the OP which is now 2.7 and tried the battery mods there. I couldn't flash through CWM, so I dowloaded Metamorph and tried to upadate through that interface to no avail.
Anyone have any insight, or know of a battery mod that works on 2.6.4?
Thanks,
fF
funkyfungus said:
I must say my hat's off to EDT and Trigger. I've been running 2.6.4 for a couple days and it so far has been the best ROM I've flashed. Only thing I don't like is the battery icon. So I went back to the OP which is now 2.7 and tried the battery mods there. I couldn't flash through CWM, so I dowloaded Metamorph and tried to upadate through that interface to no avail.
Anyone have any insight, or know of a battery mod that works on 2.6.4?
Thanks,
fF
Click to expand...
Click to collapse
you should post inside the thread or pm me instead of opening a new thread in general
what kind of issues were you having with metamorph? please be as specific as you can
USB Debugging checked? Often times an issues with Metamorph.
It did the Checks thing with no issus at the launch of metamorph?
You clicked unzip/extract new theme... found the battery mod and selected it... did you get a popup saying it was for your phone and hit apply all?
Hey guys. I thought I'd create a new thread, because it's not a bug per se and could possibly be user error.
Metamorph just hangs at "applying framework-res.apk theme 1 of 1" when trying to install minimal matte battery mod.
Thanks
try the semi accurate... does it work fine?
Tried the Semi-Accurate, unzipped and installed via metamorph, hit apply all and it's stuck at the applying framework just like the other. Strange.
Did you verify USB Debugging like I mentioned earlier?
wait, what do you mean you unzipped it?
You just download it, open metamorph, select the file (likely sdcard/download/...) and then Apply All.
s15274n said:
Did you verify USB Debugging like I mentioned earlier?
wait, what do you mean you unzipped it?
You just download it, open metamorph, select the file (likely sdcard/download/...) and then Apply All.
Click to expand...
Click to collapse
Verified debugging on, deleted zip off phone, re-upped zip to phone, opened metamorph, selected, hit apply all, and a twirling white ice-ring hanging on applying framework. Then I have to reboot.
So i just installed the freegs4 rom and i have done everything according to the forums including reverting my twrp installer and it installs and works just fine until i have to restart the device. As soon as the device is restarted it freezes at the samsung splash screen and i have to wipe the rom again and reinstall. Ii can use it until i have to reboot then it same thing all over again
bigdaddybx2 said:
So i just installed the freegs4 rom and i have done everything according to the forums including reverting my twrp installer and it installs and works just fine until i have to restart the device. As soon as the device is restarted it freezes at the samsung splash screen and i have to wipe the rom again and reinstall. Ii can use it until i have to reboot then it same thing all over again
Click to expand...
Click to collapse
Make sure you dont have a bad download. Also try flashing a different kernel. Btw this goes in the question section
ROMANTiC KiD said:
Make sure you dont have a bad download. Also try flashing a different kernel. Btw this goes in the question section
Click to expand...
Click to collapse
I have tried different downloads and when i use a different kernel the wifi will not turn on, i have also done the md5 validation on the rom and its fine. sorry about posting in the wrong area im new to this.
Sounds like your phone might be in factory mode.. Did you wipe EFS in recovery?
Sent from my SPH-L720 using Tapatalk 4
bigdaddybx2 said:
So i just installed the freegs4 rom and i have done everything according to the forums including reverting my twrp installer and it installs and works just fine until i have to restart the device. As soon as the device is restarted it freezes at the samsung splash screen and i have to wipe the rom again and reinstall. Ii can use it until i have to reboot then it same thing all over again
Click to expand...
Click to collapse
When it freezes on that first reboot, try a battery pull and see if it will boot. If it doesn't, try another battery pull.
Mine actually did that a few times too (freeze on the SAMSUNG screen after first reboot).
freegs4
i have a question i had 2.0 working great.
i have tryed to update to 3.0 multible times.
i went from stock md5 right to 3.0 and have issues with the phone rebooting it works ok but once restarted it will not start back up. i also cant get wifi to work.
i have even downgraded to twrp 5.0.2.
i have flashed my phone back to stock md5, than root than wipe everthing than 3.0 and same issues.
i flashed back to stock md5, than root than stock md9 than wipe than 3.0 still issues
i flashed to rooted and odexed md9 wipe than 3.0 still issues.
i have download both direct and torrent and still stumped why the phone freezes after it reboots and no wifi at all after installation.
anyone have any clues?
tabodt said:
i have a question i had 2.0 working great.
i have tryed to update to 3.0 multible times.
i went from stock md5 right to 3.0 and have issues with the phone rebooting it works ok but once restarted it will not start back up. i also cant get wifi to work.
i have even downgraded to twrp 5.0.2.
i have flashed my phone back to stock md5, than root than wipe everthing than 3.0 and same issues.
i flashed back to stock md5, than root than stock md9 than wipe than 3.0 still issues
i flashed to rooted and odexed md9 wipe than 3.0 still issues.
i have download both direct and torrent and still stumped why the phone freezes after it reboots and no wifi at all after installation.
anyone have any clues?
Click to expand...
Click to collapse
Try a different kernel
Sent from my SPH-L720 using xda app-developers app
So i got my phone replaced and installed the software on it and im no longer having the issue i stated above but i do have a new issue with the call recording. I installed it through the aroma installer and then used update me to install it manually like i was reading in the thread. Everytime I try to make a call (with out even pressing the record button) the screen goes black and there is some call recording icon in the left hand side of the status bar. soon after this i get an error that says com.android.phone has stopped. I have tried to reinstall stock with out call recording but it keeps doing it as if the call recording is there. Am i forced to reset and reinstall the rom?
You might want to give Highway55's MF9 ROM a shot. It has the wifi hot spot mod *and* the status bar toggle already built in. I wrote lengthy post on 9/26 detailing my experience with Highway55 along with the simple steps I took to implement the additional mods that I wanted (including call recording).
ROMANTiC KiD said:
Try a different kernel
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
ROMANTiC KiD said:
Make sure you dont have a bad download. Also try flashing a different kernel. Btw this goes in the question section
Click to expand...
Click to collapse
I think the FreeGS4 ROM has its own AGAT custom kernel. So I don't think you want to do that...
And I've had a few issues with V3.0.0 myself. I just downgraded back to V2.0.0
Salil999 said:
I think the FreeGS4 ROM has its own AGAT custom kernel. So I don't think you want to do that...
And I've had a few issues with V3.0.0 myself. I just downgraded back to V2.0.0
Click to expand...
Click to collapse
Ive had everything running good with chronic kernel and also tested with the kernel it comes with. No problems really.
Sent from my SPH-L720 using xda app-developers app
I loved the built in ad-blocker, but noticed it interfered with hulu plus, watch ESPN, and sometimes xfinity player. I've since removed the ad blocker, but was wondering if there was a work around so that I could keep the ad blocker, but have it not block ads for these apps? Or is there a way to get these apps to work with the ad-blocker in place?
I upgraded a few days ago. This device is amazing in every way.... HTC 10's stock boomsound + Dolby sounds amazing. Was definitely in need of an audio equalizer though. I love viper and have used for yrs. I have tried every way possible to get vipers drivers installed with no luck. Here are the final steps I found and am now able to use viper successfully.
Streaming bt to my car stereo is why :this is was so important to me,because without viper it really doesn't sound good.
Unlocked Verizon running Lee-Droid nightlies. S-off as well. I'm going to link what I used to make this possible.
Requires root & unlocked bootloader.
Custom recovery.
Clean flash rom of choice .
Use a root browser and find system/vendor/etc.Rename.... audio effects Conf. To Audio effects conf.bak and save.
Go into supersu settings and unroot completely . After device reboots
I also went into my Android pay app while no root was mounted and added my card to use on AP.
Reboot to recovery.
Flash Magisk V6 ,reboot recovery, I think it's important to do this between flashes.
Flash top-johns xposed systemless framework v86.5
Reboot recovery flash magisk module template. This enables you to have root but to be able to mount and dismount root with a switch.
Reboot recovery flash supersu 2.76 magisk zip... systemless root
Reboot recovery flash viper for Android magisk zip.
Reboot device ..grant proper supersu permissions I also updated supersu binaries through play store at that time.
Download and install viper 4 android Fx v2401 apk . If you only flash the magisk version of viper through recovery and don't install the listed apk behind. Viper will still not be installed.
Open Viper4A, allow supersu privileges : install audio drivers and reboot & profit.
I've tried v28 acoustx audio and it really sounded bad as well.
Boomsound+stock dolby+ Viper = sounds better than my m8 with Dragon Fi with the Harmon Kardon MOD.
Android pay has worked all day for me also.
I spent endless hours: trying to find the combinations of things I could do to get vipers audio drivers to stay mounted and nothing.
Maybe this post will help.
I've also included uninstaller for both framework & magisk. Easiest way to uninstall is dirty flash current rom back over itself.
I have many other modules up and working also on this framework amplify, gravitybox, powernap, youtube adaway,clean lockscreen and all with the ability to mask root
Must be s-off
Downloads.
https://www.dropbox.com/s/3odvvrwn2dulsj2/Magisk-uninstaller.zip?dl=0
https://www.dropbox.com/s/d1rmlj6pj9v4evo/xposed-uninstaller-topjohnwu-20160820.zip?dl=0
https://www.dropbox.com/s/o74qhu8pwdhccyt/xposed-v86.5-sdk23-topjohnwu.zip?dl=0
https://www.dropbox.com/s/d4l8rr8hy79z16w/ViPER4Android_FX_v2401_A4.x-A6.x.apk?dl=0
https://www.dropbox.com/s/hgct738gwnazkgp/ViPER4Android-magisk.zip?dl=0
https://www.dropbox.com/s/atjygxkysgjcyig/SuperSU-v2.76-magisk.zip?dl=0
https://www.dropbox.com/s/u4icuw5dlwv0f5o/Magisk-module-template.zip?dl=0
https://www.dropbox.com/s/bkdnspqvh1ma3ae/Magisk-v6.zip?dl=0
https://www.dropbox.com/s/s4s34l00a7u7npr/XposedInstaller_by_dvdandroid.apk?dl=0
https://www.dropbox.com/s/zae9yzn02zh7bzt/Magisk_Manager_v1.2.apk?dl=0
Edit Sept 22 newest viper 2.5.0.5 all with brand new interface. Much nicer than the latter.
https://www.dropbox.com/s/s2wx6hu2xxueb1m/ViPER4Android FX-2.5.0.5.apk?dl=0
I take no credit for above files. Except gathering them into one place and sharing what worked for me.
http://cloud.tapatalk.com/s/57da413dd2058/Screenshot_20160915-023227_1.jpg?
http://cloud.tapatalk.com/s/57da4160e3c9e/Screenshot_20160915-023205.png?
Sent from my HTC6545LVW using Tapatalk
thanks for this workaround, but an easier way would be to just remove the htc_audio_effects.conf in system/etc, then just reboot and install the apk then the driver and reboot again
Why are people having issues? I have viper4android MK MOD installed without any dramas at all. All i did was dirty flash ROM selecting selinux permissive in Aroma. after a reboot i installed the mk mod zip and everything is fine, drivers installed and everything works.
yldlj said:
Why are people having issues? I have viper4android MK MOD installed without any dramas at all. All i did was dirty flash ROM selecting selinux permissive in Aroma. after a reboot i installed the mk mod zip and everything is fine, drivers installed and everything works.
Click to expand...
Click to collapse
because just using the app, doesn't modify the right file. those zips/mods are compatible with htc roms, so they modify the right file, so you don't have to do anything
but not every mod/zip is compatible with that.
Well I have a v4a working with all driver and all installed along side with Dolby eq as well both working s-on all in one zip I hear huge diff in all output speaker/aux/bluetooth as said Dolby and v4a both eq working side by side didn't do anything cept flash 1 zip
I drove on a small trip today and the 10 truly sounds amazing now. And the above is the only way I could properly install and get to stick.
Sent from my HTC6545LVW using Tapatalk
Why is s-off required? all the above steps can be done with s-on. am i missing something?
chalmizzle said:
Why is s-off required? all the above steps can be done with s-on. am i missing something?
Click to expand...
Click to collapse
You're completely right, as long as you have an unlocked bootloader you should be fine.
Sent from my HTC 10 using Tapatalk
chalmizzle said:
Why is s-off required? all the above steps can be done with s-on. am i missing something?
Click to expand...
Click to collapse
I think it is meant that you need s-off for magisk.
Aldo101t said:
I think it is meant that you need s-off for magisk.
Click to expand...
Click to collapse
S-off isn't needed for it. It's like installing any MOD to a rom, unlocked bootloader with custom recovery is enough
Sent from my HTC 10 using XDA-Developers mobile app
V4A easiest way: s-off/unlock bootloader, flash custom recovery, get root (normal supersu is fine, no need for systemless root), install V4A like normal (and install drivers using the prompt when you first go into V4A), go to system/etc/audio_effects.conf and copy paste the v4a lines into htc_audio_effects.conf. Reboot and it should all be working. I'm not sure why OP needed to go through this convoluted process.
AcoustiX isn't currently tuned for HTC 10 (which is why it doesn't sound as good), I'm going to have to redo a few things for it to sound better since I've now just gotten my device today.
i have a thread with much easier instucrions that doesnt require s off or anything, just root
---------- Post added at 07:40 AM ---------- Previous post was at 07:39 AM ----------
ZeroInfinity said:
V4A easiest way: s-off/unlock bootloader, flash custom recovery, get root (normal supersu is fine, no need for systemless root), install V4A like normal (and install drivers using the prompt when you first go into V4A), go to system/etc/audio_effects.conf and copy paste the v4a lines into htc_audio_effects.conf. Reboot and it should all be working. I'm not sure why OP needed to go through this convoluted process.
AcoustiX isn't currently tuned for HTC 10 (which is why it doesn't sound as good), I'm going to have to redo a few things for it to sound better since I've now just gotten my device today.
Click to expand...
Click to collapse
please do tell when youve got it all great
These instructions allow you to use android pay. I believe that's the main reason the OP chose this method.
tabp0le said:
These instructions allow you to use android pay. I believe that's the main reason the OP chose this method.
Click to expand...
Click to collapse
As long as you set up Android pay and add card when phone is unrooted, before flashing framework and stateless root. Yes
Sent from my HTC6545LVW using Tapatalk
Thanks for posting this! I'm anxious to dig into it after work and see if it solves my problem of having a constant hiss/white noise whenever the Viper4Audio Magisk module is enabled (I used the Magisk/SuHide/Xposed systemless combo to keep SafetyNet from tripping). I hate having to choose between SafetyNet and a usable V4A.
ZeroInfinity said:
V4A easiest way: s-off/unlock bootloader, flash custom recovery, get root (normal supersu is fine, no need for systemless root), install V4A like normal (and install drivers using the prompt when you first go into V4A), go to system/etc/audio_effects.conf and copy paste the v4a lines into htc_audio_effects.conf. Reboot and it should all be working. I'm not sure why OP needed to go through this convoluted process.
AcoustiX isn't currently tuned for HTC 10 (which is why it doesn't sound as good), I'm going to have to redo a few things for it to sound better since I've now just gotten my device today.
Click to expand...
Click to collapse
My go to MOD finally I've been waiting for it to get tuned for our device had it rocking on the m8 and m9
Great tutorial for people looking into magisk in general, straightforward and works. Certainly got me going, Verizon running Viper 3.1.0, I made sure to format data and start fresh fyi
@mattie_49 Before doing this method, did you get a lot of static/white noise when running V4A on LeeDroid? I can't seem to get rid of the constant static when V4A is enabled. It worked fine on Stock, so I'm not sure what the problem is at this point.
macschwag14 said:
@mattie_49 Before doing this method, did you get a lot of static/white noise when running V4A on LeeDroid? I can't seem to get rid of the constant static when V4A is enabled. It worked fine on Stock, so I'm not sure what the problem is at this point.
Click to expand...
Click to collapse
No. And that was the rom I first loaded up also. Did you use the newest viper apk I posted last night at the bottom.
Sent from my HTC6545LVW using Tapatalk
Thanks for posting the 2.5 update. I installed that version, which asked for SU privileges and installed drivers. All seems to be working well now.
If you are/have themed your Axon. Please share what you are using. I would like to change settings, etc to darker colors. And theme status icons even QS if possible. Not sure what works. Don't want to have to factory reset multiple times trying the wrong apps.
Thanks
If you're not rooted, the only option is to use a launcher that has some theme-ing capabilities (like Nova).
If you are Rooted, you can use substratum.. But not everything "themes", and some of the things that do, have some compatibility issues. If you theme the system and notifications, when you press and hold the power button, it just shuts down, you don't get the shutdown menu. If you try to change keyboards, it'll reboot too. There's a few other things that cause it to reboot......And I just had to wipe my phone and re-flash the latest B29 update because something really messed up my phone. It was either the substratum theme I was using, or the new boot animation I flashed....But, I've been using substratum for the past couple months with no issues - so it may not have been this, but I'm not going through this again.
That is exactly what i want to avoid. I was going to use substratum until i read the warnings and figured it best i check before using it.
I can verify the substratum issues .. I've found that Nova or one of the Google launchers is the way to go.
tele_jas said:
If you're not rooted, the only option is to use a launcher that has some theme-ing capabilities (like Nova).
If you are Rooted, you can use substratum.. But not everything "themes", and some of the things that do, have some compatibility issues. If you theme the system and notifications, when you press and hold the power button, it just shuts down, you don't get the shutdown menu. If you try to change keyboards, it'll reboot too. There's a few other things that cause it to reboot......And I just had to wipe my phone and re-flash the latest B29 update because something really messed up my phone. It was either the substratum theme I was using, or the new boot animation I flashed....But, I've been using substratum for the past couple months with no issues - so it may not have been this, but I'm not going through this again.
Click to expand...
Click to collapse
I bet it was substrantum. I had the same EXACT issue. Problems immediately stopped one I uninstalled substrantum.
I can't get substratum to build on my phone b29. Did you have a different kernel?
Sent from my ZTE A2017U using XDA-Developers mobile app
Far as I know there are no other kernals available at this point.
canezila said:
I can't get substratum to build on my phone b29. Did you have a different kernel?
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
No, all stock.... Just rooted.
I figured out that I missed a step after installing twrp. In the terminal : reboot disemmcwp. Now my busy box sticks and so does substratum. Now I am themed and so far, things are working. Still need to verify more to be sure.
I've been fighting with my 6P all day long trying to get Viper4Android to work after going through the process of finally rooting and installing RR ROM.
I've gone through every single tutorial I can find, I can get the app installed, but I dont think its actually running because I cant get permission to modify the audio_effects.con file in any way no matter what I search for.
Any advice would be great or even if theres a ROM for the 6P that already has it baked into the ROM I would gladly take a shot at it.
Im basically trying to increase the volume of my bluetooth audio and from everything I read, this is the only way unless someone here has any options.
Thanks!
Flashing arise 2.94 aroma installer worked for me on every rom. I'm not using rr rom, but you should give it a try. At the aroma installer tick remove deep buffering, if the processing fails on viper with rr rom . No need to modify the audio config. But if you want to do it use twrp filemanager. Boot to twrp, mount system and use the twrpfilemanager to rename or delete the audio config.
To download arise 2.94 aroma visit the arise thread here on xda.
Edit: to check if viper is working, check the driver status on viper while you playing some music, processing has to show "yes"
ya, the driver for viper is enabled, but not processing.
Im going to work on installing that mod this morning and Ill let you know how I make out!
Thanks!
Just wanted to let you know that suggesting using Arise was awesome!
It took a bit to figure out how to actually install it since RR doesnt use Aroma, but I got the files modified and it installed perfectly!
VIper4Arise is enabled and Processing!
Ive been using XDA since I've owned an HTC Hero and you guys are STILL the best!
Thanks!
I gave up on V4A a while ago, and went with AudioFX