Hi all,
I bought a Unlock Milestone 2 in Brazil and have a big problem.
It only works with a Oi mobile operator network, the others Claro, TIM and VIVO signal does not appear, but the internet works.
My M2 has the custom retail firmware from Brazil and I've done hard reset, reinstall the firmware and it still in emergency call.
I read something about what may be the baseband, but how can I get and install?
My phone is rooted with z4root.
Best regards.
hapitta said:
Hi all,
I bought a Unlock Milestone 2 in Brazil and have a big problem.
It only works with a Oi mobile operator network, the others Claro, TIM and VIVO signal does not appear, but the internet works.
My M2 has the custom retail firmware from Brazil and I've done hard reset, reinstall the firmware and it still in emergency call.
I read something about what may be the baseband, but how can I get and install?
My phone is rooted with z4root.
Best regards.
Click to expand...
Click to collapse
im not sure if changing the baseband might help, but do check out this thread. perhaps somebody has an answer to ur question here.
http://forum.xda-developers.com/showthread.php?t=940828
I dont have this problem
Try APN Brasil app, you can find it on Android Market. You just need to open and tap "Configurar APNs" (Configure APNs).
I bought my Milestone2 from TIM and used on Oi for some time, now im using in TIM without any problems using APN Brasil.
I only used APN BRASIL.
Have you tried to reflash your device with Brazilian Stock ROM?Try to change to WCDMA preferred or WCDMA only. To do this, open dialpad and press:
*#*#4636#*#*
If you reflash, dont forgot to reinstall APN Brasil.
Hope it works, buddy!
Remains the same.
The cellphone get signal after minutes, stay 10 minutes with signal, i used.. but suddenly appears the "emergency call only" message
=/
___
edit:
I tried to reflash too, and then used APN Brasil but nothing happens
falecomcyber said:
Remains the same.
The cellphone get signal after minutes, stay 10 minutes with signal, i used.. but suddenly appears the "emergency call only" message
=/
___
edit:
I tried to reflash too, and then used APN Brasil but nothing happens
Click to expand...
Click to collapse
Do you change the baseband to 2G ?
Similar Problem
I have an lg vs980 and I was using it with H2O wireless and later I changed to Simple Mobile. I'm living in Puerto Rico. The phone was working all right and, suddenly, one day it was always displaying 'emergency calls only'.
I did factory reset, then I reflashed stock lollipop and it was like nothing happened, keeps displaying 'emergency calls only'.
Then I found this post http://forum.xda-developers.com/show....php?t=2394689 and applied the patch but didn't seem to resolve the problem.
As a last resort I tried flashing cm 12.1 and before first boot applied the patch from the cited thread but no result, keeps displaying 'emergency calls only'.
Has anyone found a solution to this problem?
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
bharath9962 said:
Hi Guys,
I am writing this Thread believing that I will get a solution as Yota company has not provided any solution after 15 days trouble shooting. I just brought the phone from Russian seller through eBay.com to India and after 2 months of fight from the local customs office I just got my phone. I was very happy and was floating in air to have the first dual screen phone in my hand. The phone was flawless with dual screen was working awesome. The phone came with lollipop update. I switched on the phone with out inserting the simcard, the phone prompted for a small 350 MB update and I just update the phone. Then I just inserted the Simcard after which i started facing issue. The issue was the phone is able to read and shoe the service provider name but there was no network signal and it was showing only emergency calls. When i tried to make calls it showed network no registered. I tried with different simcard which resulted in the same issue. I though it might be a simcard issue and checked with my old phone but there was no simcard issue. So i just contacted the Yota tech team through mail to help me on this issue. They asked me do some basic troubleshooting but there was no use after 15 days they asked me to ship the phone to nearest service center which is in Russia. The issue is to and back from Russia customs will cost me the price of 2 Yotaphone fist generation phone price. So I through of resolving this issue myself and researched in online. I found that Samsung phones were also facing the same issue after update and tried all the solutions given in internet but there was no use. Finally there was a solution asking to root the phone and install the ariza patch which would solve the issue. I just rooted my phone and when I installed the ariza it showed it was not compilable for yotaphone 2. I just searched in XDA forums and could not find anyone reporting the similar issue with a solution. So I through of creating new thread in hope of getting a solution in this issue. Please help me in this issue by creating a patch or any solution which will me help me out of this. I am not able to use the phone as the basic call function is not even working reset the phone is a heaven.:crying::crying::crying:
Click to expand...
Click to collapse
Do you still have this problem?
I wasn't sure at first, I thought it was my sim card, but I have tried 2 different networks sims and they both get no signal in my Yotaphone 2...
The network's name does appear, so the sim must be being read somewhat, but I always get no signal.
I literally have no idea what to do.
I too turned the phone on without a simcard, flashed the RU latest rom, flashed TWRP, rooted it etc, surely that has nothing to do with it...?
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
cbcbcvcc said:
@bharath9962 ! I fixed it!
I have no idea why this happened, and I spent a few hours trying to fix it, very angry. I downgraded to 4.4 to see if it would help, put back the native China rom that came with my phone (accidentally deleted my backup too...)
I bought a new sim card just for this phone because the old one did not 'work'.
This is not a popular phone so it's hard to find information, anyway... I'm very relieved now. I can only imagine you gave up...
I found the answer here - thewichitacomputerguy.com/blog/how-i-fixed-your-sim-card-does-not-allow-connection-network-g1
1. Open the phone dialer
2. Enter: *#*#4636#*#* (Once entered, you will be taken directly to a "Testing" page) [4636 spells INFO]
3. Tap Phone Information
4. Scroll to the bottom of the screen and you should see a button that says radio off. Hit this button and when it reads radio on Hit it again to turn the radio back on. <-- (Not a Typo)
I rebooted and waited a few seconds, no signal. I turned on airplane mode, turned it off, and it worked!
Now I can go back to RU 1.99 and reinstall all my stuff...
Click to expand...
Click to collapse
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
bharath9962 said:
@cbcbcvcc may i know which country you are and what type of sim your using. So that i could check my issue accordingly.. And thanks for your reply tp my post as i waa waiting for some one to help for the last 3 months... When hope was vanishing you just showed up.. This help means a lot to me
Click to expand...
Click to collapse
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
cbcbcvcc said:
My country is in Asia but I believe this does not matter - the problem was that somehow the radio (cell phone function) was 'off'/glitched, and had to be turned on+off to make the phone function again. Using a different country's sim card would not fix this problem.
As I wrote above, we both share the fact that we first turned our phones on with no sim, and updated. Maybe just a coincidence...
Just try the guide and please let me know if it is fixed!
Click to expand...
Click to collapse
Hi cbcbcvcc,
Tried the guide but still no use, I also downgraded the ROM and tried the guide still no use. This is hurting me so bad.. Do you have any other way to resolve the issue please share with me.
No SIM CARD
Hi to All,
suddenly after I did a reset and change the sim card, the Yotaphone is no more recognize the sim card.
I try to install a new rom...nothing
I try to install the Kitkat rom...nothing
I try the method suggested here to use the code *#*#46..... nothing
any help please
Please I have tried the guidelines but the radio refuse to ON. I click on it but not never respond
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
[SOLVED]
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
manu3556 said:
Hello, I have update my Yotaphone and now I receive WCDMA, but no gsm/edge signal .
I change the Rom (lollipop,kitkat,, HK rom, EU Rom)but I have always the problem :
I receive H, H+. But no Edge/GSM...
Can you help me.
Click to expand...
Click to collapse
good job deepmnd
thanks :good::good::good:
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Hi there,
you don't have ADB drivers installed. Google for "universal adb driver" and install. There is driver included with yota 5.0 firmware (C:\Program Files (x86)\yotaphone_flasher\Driver\Google), but any other adb driver should work as well.
And use original yota usb cable!!!
It shouldn't take more that a few seconds for those commands to execute.
MDans said:
Hello!
I try to figure out what you did but I get stucked in number 10.
Actually I flashed my Yotaphone with the chinese radio the first time, but I don't get good connectivity.
Anyways I try to do what you wrote, but when I tipe the first line (first fastboot command), cmd keep saying waiting for the device... maybe is that I'm impatient but nothing happens.
I try other USB ports and nothing works...
So actually I don't know if I'm doing it right or if I have to wait for a longer period of time (10 minutes or more).
Any help would much appreciated.
Cheers!
Click to expand...
Click to collapse
Had the same problem
Hi all, I had the same problem when I flashed russian firmware (YD201) over my phone which originally had honkong firmware (YD206).
I can inform that for me it also worked to flash the Chinese firware with yotaflasher.
However, when I tried to only flash the radio, it seemed it did not work. So I flashed the complete chinese kitkat firmware with yotaflasher and then afterward just removed/renamed the radio folder when flashing the newest russian lollipop firmware. Everything working great now, even was able to do some ota's without any problems since the ota's did not update anything of the radio img's.
And indeed you first need to make sure that you have the fastboot drivers installed and your device gets recognized as fastboot device by your PC.
You can test this by doing "fastboot devices". If you device turns up there as a fastboot devices, then the drivers and connection from pc to phone are ok.
Good Luck!
Thank you deepmnd and tomgaga.
Actually I had to activate developer options... And then reinstall the ADB cause, aparently I had it but it didn't work.
After that the instructions worked perfectly, but I still have network issues.
I don't know if it is because I have a MVNO (Mobile virtual network operator) and the phone has to change between the networks ( the one that provides the network and the MVNO).
I think that when it changes from one net to the other is when I lose connectivity and sometimes I have to search the network and choose it manually.
So this problem actually happened to me and the solution was to activate Roaming services (but I dont' know if is actually the same problem).
Anyways I can see that I connect to EDGE, HSPA/HSDPA and LTE.
For sure there is a way to monitor the network and check wich ones works.
Another guess is that being a phone for the chinese market, and the lack of the 900mhz band is causing this ¿?
So at the moment I'm losing signal just by walking on the street and I live in a big city. It seems that LTE and H works fine but I don't have a a way to assure this.
When I will have a spare time I will try to reflash the phone with the instructions deepmnd provided and see if it will work.
Thank you for your help!
Any advice will be appreciated!!
Update:
I try tomgaga approach I will test it just to see if is the network or my provider
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
kbal said:
Does anybody know which bands different firmwares support?
Reception is incredibly bad in my case (206 flashed with EU firmware).
It'd be nice if somebody has any info on unlocking different bands for yotaphone2.
Click to expand...
Click to collapse
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
MDans said:
Here you have the bands
https://www.frequencycheck.com/compare-devices/qkjseR/yota-yotaphone-2-yd201/yota-yotaphone-2-yd206
I have the same problem as you, I will try this weekend to downgrade to the older chinese rom and check if the reception get better.
And if then to the latest RU rom.
Click to expand...
Click to collapse
Thanks for that, it helps a lot to clear the situation regarding the two models.
Now, taking in account deepmnd´s solution above, would it be possible to find those missing bands from the original 206 which are not available to the updated (and then international, 201-) version and add them individually, file by file via the fastboot flashing?
I followed deepmnd's instructions, and my phone now connects to GSM/EDGE, which was not possible before using the EU Radio (latest EU rom). Thanks for this!
Unfortunately it now preferably (!) connects to EDGE, although the LTE/WCDMA-Option is prioritized. I can force the phone to connect to WCDMA by using the WCDMA-only-option, but in this case it does not commit a fallback to EDGE if 3G is missing and I have no connectivity at all, unless I change the band-options and force a connect to EDGE. I'd like it to switch between the bands automatically, as my YD201 did without problems (in Germany).
Any hints to solve this problem?
Thanks in advance, Knut
deepmnd said:
Fix for Yotaphone 2 YD206 from China
If you already flashed the phone to latest EU 5.0, you can skip 1-5
1. download via FTP: fw.ydevices.com/YotaPhone2/YotaPhoneFlasher/yotaphone2_flasher.exe and install
2. run flasher and download latest EU rom (2 - 5- 7)
3. turn off the phone and turn it on while holding volume down - this will boot the phone in "downloading..." mode
4. in the flasher press 1 (Flash the cellphone)
5. the phone is now on 5.0.0-EU1.1.124b and 2G is not working at all and 3G is connecting only to 2100 MHz (on my cell network)
6. download via FTP: fw.ydevices.com/YotaPhone2/Firmwares/CN/4.4.3-S01-003-CN1.0.3.32a.zip
7. unzip the file and copy \radio to c:\program files (x86)\yotaphone_flasher
8. run cmd and go to c:\program files (x86)\yotaphone_flasher
9. repeat step 3.
10. run next lines:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
11. reboot the phone and enjoy 2G and strong 3G signal
Click to expand...
Click to collapse
Thank you! I had missed calls and did not know what caused them. Then I noticed this happened when I was not on LTE network but on WCDMA or 2G network. And this seems to have solved the issue for me as well.
Hi Guys,
I have this annoying problem and I'll ll be glad if someone can help me.
I have the Korean Samsung Galaxy Note 4 SM-N916S, Rooted android version 5.1.1
I live in the Philippine and I'm using local SIM Card. I can make out/in phone calls.
The problems are:
1. Many times I get the message "network not register" restart the phone fix the problem, sometime I need to restart the phone twice
2. when I switch on the phone I get warning message "Data mobile off/on"
3. Can't send SMS to UK
4. The Sim Tool Kit can run and I need to use some substitute app, which not work so well
After I dig deep the Internet I got to understand the problem came because the phone is Korean version and It will fix only by Change the CSC Code from 'KOR' to International version
no matter what I did I can't change it to any other CSC code, from the error messages I understand to change the CSC Code I should have Multi CSC firmware, which I don't have.
I will appreciate any help
hi
i have same problem whit my note 4 sm-n916s.
its worked well, but after 6 mounts i can' t to call or to get incoming
only this problem, every things working well.
do u fix it
Hi! I have an A5 (SM-A500FU) bought in Italy last year, Im using it since then in Argentina. With android lollipop I have never had issues with lost signal, no service messages or network not available. But since upgrading by OTA to Marshmallow these problems started. I have looked everywhere but I cant find anything that helps me. Also my service problems are not always present, sometimes I do have signal, but mostly when im out in the street. At home, for example I have no service and "only emergency calls" message. I'm using right now and old Moto XT316 with the same SIM card ( Claro AR) im using in the A5, and it is working fine, recieving network signal ( it is also a new sim card, just in case old SIM was the problem). The thing is I can´t use my A5 because it is constantly losing signal.
Thing I have already tried and didn't work:
- Changing to aireplan mode for a few minutes
-take out SIM card, restart the phone, turn off phone, put sim back in again, turn on phone
-verifiyng the APN for my network Claro Ar was correct, manually searching networks ( At home for example, it only finds Personal and Movistar (sometimes) but never finds Claro ar)
-Doing factory reset
-Reinstalling official firmware (PDA version : A500FUXXS1CPH2; CSC version : A500FUVFR1CPG2) with kies3 ( smart switch gave me an error)
-Flashing the UK BTU ROM ( the old one was from Vodafone Italy, now Phone info app says my mobile operator is 72234, while befor was 722310 which is correspondig with claro ar, what does this mean)
what could be causing this problem???? Im really starting to desperate now...
I read something interesting online, searching for some answers I got to the experience of some guy who had a very similar problem. Short story, his had to change his phone's network configuration in the "radioinfo" menu (or whatever the name of that hidden menu is) with an app named Network and force his cellphone to use only 3g or 2g. Turns out that his phone was trying to use LTE but LTE was not available in his region. This solved his problem. Mi phone can't use LTE here in Argentina because it is Italian, and since I have it it never conected to LTE network (I guess we use different frequencies) So I was thinking maybe my phone is also trying to use LTE but since it won't reach 4g signal ends up with no signal at all, excatly like this guy's phone.
But, apparently I need root access to get to this menu or even use this apps, is that correct?
So, should I root my phone to try that? does that story make any sense to you? Any advice?
Downgrade to lollipop I read is not my best option, also rooting it isn´t , but I'm starting to run out of solutions.
I add this information that could be helpfull:
Product Code : SM-A500FZKUBTU
Original CSC code : BTU
Active CSC code : BTU
PDA version : A500FUXXU1CPH3
CSC version : A500FUBTU1CPH1
Baseband version :A500FUXXU1CPH3
Android version : 6.0.1
Build number: MMB29.A500FUXXU1CPH3
Mobile operator :72234
Also IMEI number seems to be fine, it starts with 35 and matches the one in the back of the phone.
Sorry It is such a long thread!! Thank you very much!!
hello guys,
sorry for my bad english
need some expert help
i have a p8 gra-l09
emui 4.0.1
build gra-l09c432b390
since a couple of weeks i cannot place or answer calls (since build b200, it was working before)
tried with 3 different builds
tried with 3 providers, same issue
in fact the phone can only connect to providers with 4g, it's impossible to switch manually to 3g/2g settings, no networks detected
so i think as the phone can't switch, is unable to connect to audio call
with 4g network i'm able to connect to internet, and sending receive sms too
did you already heard about this kind of issue ?
thx a lot for you help
Raphael
rafff30 said:
hello guys,
sorry for my bad english
need some expert help
i have a p8 gra-l09
emui 4.0.1
build gra-l09c432b390
since a couple of weeks i cannot place or answer calls (since build b200, it was working before)
tried with 3 different builds
tried with 3 providers, same issue
in fact the phone can only connect to providers with 4g, it's impossible to switch manually to 3g/2g settings, no networks detected
so i think as the phone can't switch, is unable to connect to audio call
with 4g network i'm able to connect to internet, and sending receive sms too
did you already heard about this kind of issue ?
thx a lot for you help
Raphael
Click to expand...
Click to collapse
I'm in the exact same situation. I tried to rollback from b390 to b170, b200 but it's the same (stock rom).
I tried to flash the modem/radio but I can't : FAILED (remote: Command not allowed)
Any idea someone ? I'm getting desperate
psy_ said:
I'm in the exact same situation. I tried to rollback from b390 to b170, b200 but it's the same (stock rom).
I tried to flash the modem/radio but I can't : FAILED (remote: Command not allowed)
Any idea someone ? I'm getting desperate
Click to expand...
Click to collapse
guys did you manage to get this resolved?
Hi again. I have sort of figured something more out about the problem. This morning 3G did not want to work again. So I googled, and googled and googled. Tried everything basically. Then I noticed that my APN settings are not what they were last time I set them(???). So I went into my carriers website. Set the correct apn values and removed any unnecessary values that did not seem to affect anything. Then it immediately worked again. Now I have no idea how phones sets the default settings but it seems like they are wrong? Maybe this was just random that it started working after applying the correct settings again. No idea, going to see if it works all day or if it randomly stops working as earlier.
Edit: 5 hours later still works and the connection hasnt stopped randomly.
Ok so it has worked for 13 hours. It's actually weird if the APN settings for 4g broke the 3g connection sometimes randomly throughout the day, right? I don't know how apn settings really work but I remember setting a port number and also changed the name of the APN so that I can be sure it does not change to something else.