Database Users

[Q] I can't go to recovery:(

i Can't go to recovery?
anybody can help me????

Is your nexus unlocked? Try one of the tutorials / unlock tools in the dev section.
Getting into recovery mode: Push and hold the volume up and down buttons and then push the on/off button. you should switch to the recovery mode with the volume keys and confirm with on/off.

carrsi said:
Is your nexus unlocked? Try one of the tutorials / unlock tools in the dev section.
Getting into recovery mode: Push and hold the volume up and down buttons and then push the on/off button. you should switch to the recovery mode with the volume keys and confirm with on/off.
Click to expand...
Click to collapse
yes my N7 is unlocked...and it have cwm recovery! but when i go to fastboot and click recovery mod my tab freeze!

nobody can help me?

There is a bug in the bootloader where you cannot go to recovery from it without a computer.
Connect to a computer, reboot to bootloader and then go to recovery from there.

Or just install quick boot from playstore
Inviato dal mio Nexus 7 con Tapatalk 2

markj338 said:
There is a bug in the bootloader where you cannot go to recovery from it without a computer.
Connect to a computer, reboot to bootloader and then go to recovery from there.
Click to expand...
Click to collapse
thanks but how i can go to recovery from pc?

farshad.shirzadii said:
thanks but how i can go to recovery from pc?
Click to expand...
Click to collapse
Just reboot in recovery while your nexus7 is connected to PC through usb
Inviato dal mio Nexus 7 con Tapatalk 2

mouse100 said:
Or just install quick boot from playstore
Inviato dal mio Nexus 7 con Tapatalk 2
Click to expand...
Click to collapse
this app need root...........!!
my N7 isn't root.

OK so you can follow my previous post instructions anyway to boot into recovery
Inviato dal mio Nexus 7 con Tapatalk 2

mouse100 said:
OK so you can follow my previous post instructions anyway to boot into recovery
Inviato dal mio Nexus 7 con Tapatalk 2
Click to expand...
Click to collapse
Nope it doesn't work. I'm having the same issue but i'm getting the android with the triangle every time I try to enter the recovery regardless of whether its from the bootloader or via adb reboot recovery. I restored the stock JRO03D factory image from fastboot but the recovery doesn't seem to be written. I tried both locked and unlocked bootloader while restoring the N7 to stock but that didn't work either. It's such a PITA considering i'm RMA on a screen defect and I can't seem to restore it to total stock.
Can anybody help me? Please?

mouse100 said:
OK so you can follow my previous post instructions anyway to boot into recovery
Inviato dal mio Nexus 7 con Tapatalk 2
Click to expand...
Click to collapse
how from pc??????
can explain it for me step by step??

farshad.shirzadii said:
how from pc??????
can explain it for me step by step??
Click to expand...
Click to collapse
Just make sure the computer is on
Then connect it via USB
Hold power+vol down as you normally would and go to bootloader
Select recovery, and it should not stay on the google logo this time.
You might need fastboot/adb drivers installed, I don't know. You can get them from a toolkit. Its easy with adb to get to recovery, all you have to do is connect and type "adb reboot recovery" in a command prompt.

markj338 said:
Just make sure the computer is on
Then connect it via USB
Hold power+vol down as you normally would and go to bootloader
Select recovery, and it should not stay on the google logo this time.
You might need fastboot/adb drivers installed, I don't know. You can get them from a toolkit. Its easy with adb to get to recovery, all you have to do is connect and type "adb reboot recovery" in a command prompt.
Click to expand...
Click to collapse
I did it but the same Android with the triangle keeps popping up.
Sent from my Galaxy Nexus using xda app-developers app

markj338 said:
Just make sure the computer is on
Then connect it via USB
Hold power+vol down as you normally would and go to bootloader
Select recovery, and it should not stay on the google logo this time.
You might need fastboot/adb drivers installed, I don't know. You can get them from a toolkit. Its easy with adb to get to recovery, all you have to do is connect and type "adb reboot recovery" in a command prompt.
Click to expand...
Click to collapse
i did it too but stay on google logo

AndIKnow said:
I did it but the same Android with the triangle keeps popping up.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Have you tried to rename original recovery files in /system before flashing a custom recovery?
You can find further info here (points 5-7):
http://forum.xda-developers.com/showthread.php?p=32610691
Inviato dal mio GT-I9300 con Tapatalk 2

mouse100 said:
Have you tried to rename original recovery files in /system before flashing a custom recovery?
You can find further info here (points 5-7):
http://forum.xda-developers.com/showthread.php?p=32610691
Inviato dal mio GT-I9300 con Tapatalk 2
Click to expand...
Click to collapse
thanks by 6) I downloaded Clockworkmod recovery from http://download2.clockworkmod.com/re....0-grouper.img
and I renamed it to "recovery.img"
it work:laugh:

help me root after kk update

hello from italy
i bought a Motorola Razr M XT907 last year, i unlock bootloader root the device and flash a jb stock rom without verizon bloatware...
some months ago i give the device to my wife and she unfortunally made an update and lost root....
now the device received kk update and i want to root the device to delete bloatware with titanium backup
it's seem tha my bootloader is already unlocked, when i put the device in fastboot in the screen said unlocked, code 3
i try with mfastboot to flash the recovery of RAZR HD, but when i reboot the device using POWER+VOL_UP in the screen appears the android robot t lying with his belly open, and if i try to push any key nothing happens... i have to push POWER+VUL_UP+VOL_DOWN to reset the device... the the device reboot in normal way.....
i use mfastboot_v2, xt926-KK-CWM-6048.img recovery.....
please help me...

try flashing this recovery http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP-2.7.0.0-moto_msm8960-hdpi.img and after u flash it unplug it and then shut it down and try to boot into recovery
that one is twrp if u like cwm try this one http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.4-xt907.img
you could also try flashing the recovery you flashed but unplug it before u shut it down and then try to boot into recovery

pbanj said:
try flashing this recovery http://androidhosting.org/Devs/Dhacker29/msm8960/TWRP-2.7.0.0-moto_msm8960-hdpi.img and after u flash it unplug it and then shut it down and try to boot into recovery
that one is twrp if u like cwm try this one http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.4-xt907.img
you could also try flashing the recovery you flashed but unplug it before u shut it down and then try to boot into recovery
Click to expand...
Click to collapse
This doesn't work with new KK bootloader. You must flash the Dhacker's updated recovery you have tried. Try it again, it should work.
I don't know what exactly the mfastboot_v2 is, if it doesn't work, try normal fastboot
Odesláno z mého XT907 pomocí Tapatalk

Klen2 said:
This doesn't work with new KK bootloader. You must flash the Dhacker's updated recovery you have tried. Try it again, it should work.
I don't know what exactly the mfastboot_v2 is, if it doesn't work, try normal fastboot
Click to expand...
Click to collapse
please write the link of the correct cwm that i have to flash...
this is the LINK about mfastboot that i used
is better to use this LINK

This: http://forum.xda-developers.com/showthread.php?t=2747535
Odesláno z mého XT907 pomocí Tapatalk
---------- Post added at 11:33 AM ---------- Previous post was at 11:29 AM ----------
If you have problems with mfastboot, try fastboot, download here: http://forum.xda-developers.com/showthread.php?t=2317790
Odesláno z mého XT907 pomocí Tapatalk

Thank i'll try
Inviato dal mio XT1052 utilizzando Tapatalk

Recovery and Root directions
http://forum.xda-developers.com/showpost.php?p=52688016&postcount=2

ATTACK said:
Recovery and Root directions
http://forum.xda-developers.com/showpost.php?p=52688016&postcount=2
Click to expand...
Click to collapse
I try it but without success
Inviato dal mio XT1052 utilizzando Tapatalk

So step by step:
1) download this file to your PC: https://app.box.com/s/oyz8q1wc3ubkgspmiizt
2) extract it somewhere. For example in C:\Android
3) download recovery from this thread (first post): http://forum.xda-developers.com/showthread.php?t=2747535
4) move the recovery to C:\Android and rename to something short, for example cwm.img
5) open terminal on your PC (ctrl+alt+delete> task manager> new task> type "cmd")
6) type
cd C:\Android
Click to expand...
Click to collapse
7) now flash the recovery. Type
fastboot flash recovery cwm.img
Click to expand...
Click to collapse
8) Go to recovery and select reboot there. It will ask if you want to fix root, select yes. When phone powers up, download some Superuser app from play store to get control over root permission
Sent from my XT907 using Tapatalk

Klen2 said:
So step by step:
1) download this file to your PC: https://app.box.com/s/oyz8q1wc3ubkgspmiizt
2) extract it somewhere. For example in C:\Android
3) download recovery from this thread (first post): http://forum.xda-developers.com/showthread.php?t=2747535
4) move the recovery to C:\Android and rename to something short, for example cwm.img
5) open terminal on your PC (ctrl+alt+delete> task manager> new task> type "cmd")
6) type
7) now flash the recovery. Type
8) Go to recovery and select reboot there. It will ask if you want to fix root, select yes
. When phone powers up, download some Superuser app from play store to get control over root permission
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
thanks now it's rooted :highfive:
but when i reboot in cwm the not ask me to fix root, so i flash supersu and reboot...
in the past times i made the mistake to use mfastboot...:silly:

this is for unlocked bootloader correct

You can flash via RSD the ROM you already have or newer when locked. You just can't downgrade.
Sent from my XT907 using Tapatalk

samari71 said:
this is for unlocked bootloader correct
Click to expand...
Click to collapse
Correct.

is there a rom without verizon bloatware?
and how can i remove the message "sim from another...." ?
thanks

Go it Droid Razr M development, there are some. This is good: http://forum.xda-developers.com/showthread.php?t=2761322
And about the SIM warning i would like too to know, how to remove it.

uppetete

[Guide] Unlock Bootloader Samsung Galaxy J7

To unlock Samsung Galaxy J7, you need to start by installing ADT tools with all the packages. You will then download Modaco Superboot and unlock bootloader Samsung Galaxy J7.
The process looks simple but be sure you follow steps exactly as instructed.
Step 1: Setup ADT
You will need to download and install ADT before you proceed with this method. You can download it using the link below.
DOWNLOAD ADT
Be sure to download it with all packages.
Once downloaded, configure the ADT. You will follow simple instructions to configure it on the official Android Developer website [developer.android.com/sdk].
Step 2: Download Modaco Superboot
After you have ADT setup successfully, you need to download Modaco Superboot. This software will help you unlock your phone.
DOWNLOAD MODACO SUPERBOOT FROM ATTACHMENT.
Extract the zip file that you downloaded from the above link somewhere on your hard drive.
Now go to the folder where you extracted the zip file and follow instructions in the next step.
Step 3: Setup your phone
Now it’s time to setup your phone so that you can connect it with PC and proceed with the next step.
Go to Settings on your phone. Look for Developer Options. Turn on USB debugging from there. It should be easy to find once you have enabled developer options.
Now connect your phone with your PC using a standard USB cable.
Step 4: Run command prompt and unlock bootloader Samsung Galaxy J7
So far so easy. Everything is going to remain this easy as long as you follow instructions.
That’s how it’s going to be till the very end. Follow these simple instructions to complete the final step of this method to unlock bootloader Samsung Galaxy J7.
Open command prompt by right clicking in empty space inside the Modaco Superboot folder.
Once you have the command prompt opened, enter the commands shown in the end and hit enter as you reach end of each line.
Once you reach the last line, your device screen will flicker a few times and it will display a toast message asking you if you’re sure. Click Yes and your device will be unlocked.
Commands to enter – Make sure you hit enter after each line
Note: Enter all commands without quotation marks.
Line 1: “adb-windows reboot bootloader”
Line 2: “fastboot-modaco-windows oem unlock”
After you enter the first command and hit Enter, your phone will restart. Wait for it to restart before you enter the second command.
Warning: I am not responsible for any bricked device.

Which version j700 is it for?
Sent from my SM-J700T using XDA Free mobile app

alarmdude9 said:
Which version j700 is it for?
Sent from my SM-J700T using XDA Free mobile app
Click to expand...
Click to collapse
This method will work on both old (J700) as well as new 2016 (J710) Samsung Galaxy J7 models

The link to The modaco Superboot is not working. Can you please Update the link or Upload it somewhere else?

amdsam95 said:
The link to The modaco Superboot is not working. Can you please Update the link or Upload it somewhere else?
Click to expand...
Click to collapse
Link is working --> https://drive.google.com/file/d/0BwN7Pihc2v1jWjBnbGZiZFFnWm8/view

bravonova said:
Link is working --> https://drive.google.com/file/d/0BwN7Pihc2v1jWjBnbGZiZFFnWm8/view
Click to expand...
Click to collapse
The link appears dead again, would you mind reposting, Please...
Thank you

volusia said:
The link appears dead again, would you mind reposting, Please...
Thank you
Click to expand...
Click to collapse
Zip attached in this post

thank you very much

Sorry for the question, but what we gains whit bootloader unlocked? Sorry for my English
Enviado desde mi SM-J700M mediante Tapatalk

elhugo3 said:
Sorry for the question, but what we gains whit bootloader unlocked? Sorry for my English
Enviado desde mi SM-J700M mediante Tapatalk
Click to expand...
Click to collapse
You can able to flash custom ROMs when you unlock bootloader

bravonova said:
You can able to flash custom ROMs when you unlock bootloader
Click to expand...
Click to collapse
OK, but in some threads of custom roms don't specify that we have to unlock the bootloader. So if the bootloader are locked what happens? Only can't flash the rom? Thanks
Enviado desde mi SM-J700M mediante Tapatalk

elhugo3 said:
OK, but in some threads of custom roms don't specify that we have to unlock the bootloader. So if the bootloader are locked what happens? Only can't flash the rom? Thanks
Enviado desde mi SM-J700M mediante Tapatalk
Click to expand...
Click to collapse
search google for more details on pros and cons of unlocking bootloader

Will this unlock also work for the 2016 J7 TMobile variant or any idea if that's coming soonish like the recent unlock the On5 TMobile one got?

AngryManMLS said:
Will this unlock also work for the 2016 J7 TMobile variant or any idea if that's coming soonish like the recent unlock the On5 TMobile one got?
Click to expand...
Click to collapse
Yes. This method will also work with J7 2016 model.

I get stuck in waiting for device in cmd
Any ideas how to get pass this?
The Computer does detect the phone.

amdsam95 said:
I get stuck in waiting for device in cmd
Any ideas how to get pass this?
The Computer does detect the phone.
Click to expand...
Click to collapse
Can you tell me what you did, in detail??

Hi, @bravonova it's possible to back to stock recovery without flashing stock rom? How? Sorry for post here
Enviado desde mi SM-J700M mediante Tapatalk

bravonova said:
Can you tell me what you did, in detail??
Click to expand...
Click to collapse
I installed ADT then installed the Modaco superboot and extracted the files. I opened the command prompt In the folder where i extracted The Modaco superboot and entered the 1st line and then waited till the phone restarted then the phone gets stuck in what i mentioned earlier.

I'm on MM j700m.
adb-windows reboot bootloader don't boot on bootloader mode, simply restart the phone, also try with terminal commands reboot bootloader.
Maybe MM j700 don't have bootloader mode and has been replaced with download mode for Odin?

amdsam95 said:
I installed ADT then installed the Modaco superboot and extracted the files. I opened the command prompt In the folder where i extracted The Modaco superboot and entered the 1st line and then waited till the phone restarted then the phone gets stuck in what i mentioned earlier.
Click to expand...
Click to collapse
Install Samsung Galaxy J7 device drives on your PC. It will get detected.

Redmi 3s bricked

Hi there!
I tried to flash a mi-globe ROM to my redmi 3s and i totally bricked it, need help with. I followed these steps:
-Unlock bootloader with Mi unlock. It says it was already unlocked.
-Flash TWRP via fastboot.
-Flash ROM mi-globe with all wipes.
Now, i can only boot in fastboot mode. When i try to boot normal or into recovery mode, the "mi" logo appears just for a sec and the phone turns off. I also try to flash MIUI global ROM with Miflash but it throws me the error "Critical partition flashing is not allowed". Trying to enter the edl mode says bootloader is locked (problaby it wasn't unlocked first time??). Mi PC Suite doesn't recognize mi phone neither. Any ideas? i don't know what else to try.

Try flashing some other ROMs.

william.johhn7! said:
Try flashing some other ROMs.
Click to expand...
Click to collapse
As i said, problem is I can't flash any
Enviado desde mi SM-G920F mediante Tapatalk

puskich said:
As i said, problem is I can't flash any
Enviado desde mi SM-G920F mediante Tapatalk
Click to expand...
Click to collapse
Can't access twrp?

william.johhn7! said:
Can't access twrp?
Click to expand...
Click to collapse
No, I can't enter recovery or download. Just fastboot
Enviado desde mi SM-G920F mediante Tapatalk

puskich said:
No, I can't enter recovery or download. Just fastboot
Enviado desde mi SM-G920F mediante Tapatalk
Click to expand...
Click to collapse
Get help from this telegram group. They'll help you out.
https://forum.xda-developers.com/xi...i-3s-3x-land-xda-4pda-ot-discussions-t3673714

william.johhn7! said:
Get help from this telegram group. They'll help you out.
https://forum.xda-developers.com/xi...i-3s-3x-land-xda-4pda-ot-discussions-t3673714
Click to expand...
Click to collapse
Thanks, I'll check it
Enviado desde mi SM-G920F mediante Tapatalk

Unbricking Redmi 3S after Bootloop
I was facing the same issus. I am currently on newest Xiaomi.EU version and made a mistake during Magisk-Flashing via TWRP. Result was a Bootloop after nearly 10sec. Booting to Dev-Menu/Recovery was not possible, but fastboot worked. I didn't wanted to flash a completely new and official Rom via Fastboot (typical unbricking-method of Xiaomi with MiFlash etc.) because there is no fastboot-rom of Xiaomi.EU and i wanted to keep my data and my rom!
Here's my solution:
Download ADB/Fastboot drivers and extract them
copy twrp*.img from here to the same directroy as fastboot
open terminal and go to the directory
Boot Redmi 3S to fastboot-mode with Power + Vol-
run "fastboot boot TWRP-3.2.0-0-unnoficial-oreo-land.img"
Device should now reboot to recovery. (that's not the solution!)
Now I flashed Xposed-Uninstall.zip, Magisk-Uninstall.zip, cleared Dalvik-Cache and installed the latest Xiaomi.EU OTA-Update.zip
Reboot: et voila, everything works perfectly again.

Fabian2103 said:
I was facing the same issus. I am currently on newest Xiaomi.EU version and made a mistake during Magisk-Flashing via TWRP. Result was a Bootloop after nearly 10sec. Booting to Dev-Menu/Recovery was not possible, but fastboot worked. I didn't wanted to flash a completely new and official Rom via Fastboot (typical unbricking-method of Xiaomi with MiFlash etc.) because there is no fastboot-rom of Xiaomi.EU and i wanted to keep my data and my rom!
Here's my solution:
Download ADB/Fastboot drivers and extract them
copy twrp*.img from here to the same directroy as fastboot
open terminal and go to the directory
Boot Redmi 3S to fastboot-mode with Power + Vol-
run "fastboot boot TWRP-3.2.0-0-unnoficial-oreo-land.img"
Device should now reboot to recovery. (that's not the solution!)
Now I flashed Xposed-Uninstall.zip, Magisk-Uninstall.zip, cleared Dalvik-Cache and installed the latest Xiaomi.EU OTA-Update.zip
Reboot: et voila, everything works perfectly again.
Click to expand...
Click to collapse
Thanks for the answer but I already sent it to customer service so they fix it. If they don't, I'll definitely try this.
Enviado desde mi SM-G920F mediante Tapatalk

puskich said:
Thanks for the answer but I already sent it to customer service so they fix it. If they don't, I'll definitely try this.
Enviado desde mi SM-G920F mediante Tapatalk
Click to expand...
Click to collapse
Service center? Either they'll flash the stock ROM or change motherboard(if found hard-bricked or rooted) with a locked bootloader. Flashing the stock ROM doesn't take time, maximum 30 mins(including hardware checks).

Maybe you should try to enter the EDL with deep flash cable, then flash the global ROM from MiFlash Tool
Sent from my Xiaomi Redmi 3S using XDA Labs

Twrp cannot boot

I have mi a1 I install twrp slot a and also b it cannot boot the message will be displayed the system has been destroyed please help me

monish007 said:
I have mi a1 I install twrp slot a and also b it cannot boot the message will be displayed the system has been destroyed please help me
Click to expand...
Click to collapse
Take a deep breath. Boot with twrp (do not flash), try to make a copy of your data via twrp (you qill have to access to the file manager to copy your personal data ). Then flash to the latest rom via MIFLASH and then restore your apps and data. It's not possible (for now) to have twrp on a mi a1 phone, you will have to boot it via adb everytime you want to use it.
Enviado desde mi Mi A1 mediante Tapatalk