Hi
First thanks for the hard work you are doing creating new Rom! and sorry if this question has been on the forum before.
Q1. Vhen iam in my car and the phone is connected via BT and I received a call, there is no sound in my car speakers? The same goes for if I will make a call no sound in the car spearkers. I have tried a lot of the new firmware, same problem.
My phone: SM-J320FN
Regards
Basmand
Related
Hi guys
I have bought yesterday a bluetooth car kit, and works very well (i can receive a call, make it, hear music ...etc), but i have a question :
when i receive a call i cant hear the ring set in my phone in bluetooth car kit, i can hear only a bip, are there any solution or a mod to make it possible (hear the ring in the bluetooth car kit) ???
Thanks in advance guys, and excuse me for my bad english
Try the tool on this page:
Jetwaremobile
It also solves the problem for me (Audi Bluetooth) for ordering the phonebook in the right order.
Hi,
Received my HD2 a few days ago and had no problem making calls with the OEM BT Handsfree of my 2009 3-serie BMW.
Until I discovered that I coudn't use it to receive calls !
The HF picks-up the call OK via the iDrive or steering wheel button, but audio is dead. Both parties can's hear anything.
It's actually possible to make it work two ways: first, by answering the call via the phone button instead of the car's one, or second, by answering with the steering button or iDrive having no audio first, then by going to the phone and disconnect and reconnect the Handsfree via the phone menu and at that point the audio comes back working ok.
It is a real disapointment as my previous Diamond touch was working flawlessly in the same car.
Not to mention that it pretty useless like that because of the danger implied by trying to rush to the phone in a deap pocket or in the arm's rest compartment to push the answer key.
I hope HTC will fix that soon as it pretty useless for guys like me, working 2h of their day in the car. It seems they changed from a MS BT stack to a Widcomm, loosing compatibility in the process...
Anyone experienced the same yet ?
Yves.
Yes, i have similar problem with my BWM X5 Bluetooth.
When i am on call and same time put they key can't hear nothing from phone and from hands free. Same is if go out from the car and have call in same moment.
With my previos phone HTC HD - all working great.
Ok, thanks for the reply.
I really think it is due to the change of BT stack.
BTW, did you file a ticket to HTC support ?
I did yesterday, obviously no answer yet but could you do it too ?
The more we are, better are the chances that they do something for the next rom.
Hello,
here is my issue with the BT connection: I have a Pioneer F900BT unit in my car. With my previous Nokia E66 everything worked just fine.
Now, when connecting with HD2, conection works ok, phonebook is downloaded ok, BUT: when there is a call, the music in the car is not silented automatically; what's worse, it seems the phone doesn't send any call identification to the headunit, since all the history (outgoing, incoming calls) is empty. So, I cannot redial or see who's calling me.
I did try the fix in the registry described earlier on this thread, but it doesn't help.
Any idea?
Thank you.
I have a 2008 3 series and have no problems at all, connected first time and has worked flawlessly ever since
twisted-pixel said:
I have a 2008 3 series and have no problems at all, connected first time and has worked flawlessly ever since
Click to expand...
Click to collapse
Same here with an e92 (08/2008).
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.
Hey guys, I have an issue with my N4, regarding a car head unit, a Kenwood 4028BT. I can successfully connect the phone to it, and can receive phone call, and can control the call from the head unit. My problem is when I attempt to make a call, it makes the call on my phone, with the icon shown that is connected to a bluetooth earpiece, but no sound, either on my end, or the receiving end.
The headunit is fine btw, since I attempted to connect my gf's Xperia U, and can successfully make and receive calls, so the problem is surely with the N4. I saw online some threads saying that this is more a bug that is introduced since 5.0, so maybe not specifically with the N4, but still, maybe you guys had a similar issue, and found a solution?
Thanks in advance!
any ideas?
Hello everyone ant thanks for showing interest.
I have a i9505 Samsung Galaxy S4 (jfltexx) using Lineage OS 14.1 installed with twrp.
The problem is, when I make or answer a call from my Bluetooth headset (or in the car, it's the same thing) the sound drops and I cant hear anything, and the people I'm talking to cant hear me.
After I disconnect the headset, the problem persists and I need to reboot to hear the call.
The problem is persisting on every custom ROM I installed today. The only way to make it work is to flash the original firmware but I don't want it.
Hope you understand as English is not my native language.
Thanks for reading!
Anyone?
Same problem here. Phone calls wo blutooth work perfectly, but after connecting the bluetooth audio ppl cant hear me. After disconnecting the bluetooth device the mic still doesnt work. Reboot fixes this until i would connect bluetooth audio again.
"hands free" in bluetooth
Hello everyone.
I am having the same problem with the "hands free" in bluetooth. Does not work. Just noise.
Thank you. Great work