Mi a1 Hard Brick - Xiaomi Mi A1 Questions & Answers

My mi a1 got brick after a unistall few magisk modules, until then it detected as hs-usb 900e, and when i try flash with mi flash tool he gave me severals flash errors
Any solutions without test point?
Because i dont have the tool to open it
Thx for any help

Related

Fastboot rom, to unbrick my op5

Hi there!!!
My OP5 is full dead!!! Black screen, no charging, no buttons !!!
That why ive tried change rom, flashed via twrp installed!!!
I think the good thing is PC can recognize because device in the Qualcomm HS-USB Qdloader 9008 /EDL mode.
I have tried unbrick it, using this tools
QFIL
Q phone download tool
eMMC DL TOOL
Xiaomi Mi Flas Tool
But....................I NEED A STOCK ROM MUST HAVE
“rawprogram0.XML”, “patch0.XML”, “prog_emmc_firehose_8974.mbn” and “MPRG8974.mbn” flashers . ETC, ETC
BECAUSE
OnePlus5OXYGEN_23_OTA_009_all_1707032123_c10521d0fb8b46c0. ZIP
is missing that kind of files.
DOES SOMEBODY CAN TELL ME WHERE CAN I GET THIS KIND OF ROM FOR OP5!!!????
HELP HELP
Get it from the official site

Please help me with this anomalies

My brother wanted to flash his Xiaomi Redmi 4 Pro or Prime (I do not know what difference) version of android 6.0 and with miui 9.5.3.0 Global. But he confused the phone and flashed with the firmware just for Xiaomi Redmi 4, before doing wipe (all except sd cards and OTG) via fastboot mode and TWRP (unlocked download). Everything was flashed and the phone became a brick. Black screen, does not react to any combination of buttons, no vibrations, nothing. When I connect the phone to the computer, it shows the "Qualcomm HS-USB QDLoader 9008 (COM4)" connection, I tried to flash through MiFlash but there was always an error "cannot receive hello packet". Please, what exactly i need to do and what specific firmware should I flash to unbrick that? My brother is an idiot, but it is a big problem without mobile phobe, I would be very grateful if you could help me.
Did you try xiaomi flashing tool?not mi flash is different try!!
Sent from my markw using XDA Labs

My Xiaomi A1 was bricked after trying to boot to recovery by fastboot

Hi my A1 was bricked after trying to boot to recovery from fastboot then It was viewed as QUSB_BULK then I tried guide to solve it and the phone was detected on Mi Flash * but still no visual response on phone* After flashing it viewed sahara read error according to guide then after I unblug it then re plug it's read in device manager as Unknown USB Device (Device Descriptor Request Failed) and it can no longer be detected on Mi flash
can anyone help?
Try flashing stock via edl mode.
https://youtu.be/70hYUCjAsCM

problem while flashing mi 9t via xiaomi flash tool

hello guys
my mi 9t is crashed
i tried to flash him many times via xiaomi flash tool
i failed
i got this error : $for /f 'tokens=2delims......
Any solution ?

How to Boot into Fastboot from EDL Mode?

Dear fellow members,
The camera app in my father's Poco M3 couldn't connect to the camera. So, I decided to flash a fastboot from Mi Flash Tool. Unfortunately, I picked the wrong firmware to flash, i.e., flashed the global version instead of the Indian version. Now the device is bricked, I can't boot into fastboot again and am stuck in EDL mode. When connected to a PC the device is recognized as "Qualcomm HS-USB QDLoader 908 (COM20)"
Tried flashing the Indian firmware using Mi Flash Tool. Mi Flash Tool asks for an authorized mi account and the process is stuck in "edl authentication".
Currently, I'm draining the battery using a rubber band+cotton bud in hope that it would boot into fastboot after showing the charging logo once the battery is drained.
The Bootloader in Unlocked
The Previous Firmware was Indian
Windows 10

Categories

Resources