My brother wanted to flash his Xiaomi Redmi 4 Pro or Prime (I do not know what difference) version of android 6.0 and with miui 9.5.3.0 Global. But he confused the phone and flashed with the firmware just for Xiaomi Redmi 4, before doing wipe (all except sd cards and OTG) via fastboot mode and TWRP (unlocked download). Everything was flashed and the phone became a brick. Black screen, does not react to any combination of buttons, no vibrations, nothing. When I connect the phone to the computer, it shows the "Qualcomm HS-USB QDLoader 9008 (COM4)" connection, I tried to flash through MiFlash but there was always an error "cannot receive hello packet". Please, what exactly i need to do and what specific firmware should I flash to unbrick that? My brother is an idiot, but it is a big problem without mobile phobe, I would be very grateful if you could help me.
Did you try xiaomi flashing tool?not mi flash is different try!!
Sent from my markw using XDA Labs
Related
Hi there!!!
My OP5 is full dead!!! Black screen, no charging, no buttons !!!
That why ive tried change rom, flashed via twrp installed!!!
I think the good thing is PC can recognize because device in the Qualcomm HS-USB Qdloader 9008 /EDL mode.
I have tried unbrick it, using this tools
QFIL
Q phone download tool
eMMC DL TOOL
Xiaomi Mi Flas Tool
But....................I NEED A STOCK ROM MUST HAVE
“rawprogram0.XML”, “patch0.XML”, “prog_emmc_firehose_8974.mbn” and “MPRG8974.mbn” flashers . ETC, ETC
BECAUSE
OnePlus5OXYGEN_23_OTA_009_all_1707032123_c10521d0fb8b46c0. ZIP
is missing that kind of files.
DOES SOMEBODY CAN TELL ME WHERE CAN I GET THIS KIND OF ROM FOR OP5!!!????
HELP HELP
Get it from the official site
I recently flashed my xiaomi redmi hm 2A after rooting with cygen rom via flashify to enable me access 3G network on my phone internationally as there is no global rom for this as I have read in different thread. when I rebooted my phone as per the instruction in flashify the phone boots past the MI logo and then enters into a black screen. I have tried entering flashboot mode and recovery mode using the standard methods but not successful. The phone powers on automatically when I insert the USB Cable and when I remove the battery it tries to boot flashing the MI logo. I have tried to flash it using MI flash tool but it is not detected either by mi flashtool or mi pc suite. Iam stuck on this, I will really appreciate any help with this? it is 2014512: was flashing it to be able to access sim network as it was recognising sim card but not registering network.
Hi, there is a link for Russian forums 4pda. I was written instruction how to restore bricked redmi 2a(hm2a lte26007) device. I hope you understand. Sorry for bad English
dmitrymstr said:
Hi, there is a link for Russian forums 4pda. I was written instruction how to restore bricked redmi 2a(hm2a lte26007) device. I hope you understand. Sorry for bad English
Click to expand...
Click to collapse
Can you put the link here?
i have a redmi 4 prime don't boot i succed to flash it but it don't boot it ever on qualcomm HS-uSB qdloader 9008. there is no fastboot no recover
ever a black screen.
no one to help me??????
hi, sounds like you r hard bricked.
you need to make a deep flash cable. use it to flash stock image ..this normally works
look for "xiaomi deep flash cable"
and please always supply helper with more info..
eg.
how did u manage to flash without fastboot, what image did u flash, how did u brick it.. and so on.
Hi, every thing is in title, plz help me to figure the solution, my redmi note 7 in globale rom 10.3.5 stuck on edl mode black screen, and no flash acess in mi flash tools "unauthorized for this opperation", in Qfil method the flash is success but phone is on black screen not work
Dear fellow members,
The camera app in my father's Poco M3 couldn't connect to the camera. So, I decided to flash a fastboot from Mi Flash Tool. Unfortunately, I picked the wrong firmware to flash, i.e., flashed the global version instead of the Indian version. Now the device is bricked, I can't boot into fastboot again and am stuck in EDL mode. When connected to a PC the device is recognized as "Qualcomm HS-USB QDLoader 908 (COM20)"
Tried flashing the Indian firmware using Mi Flash Tool. Mi Flash Tool asks for an authorized mi account and the process is stuck in "edl authentication".
Currently, I'm draining the battery using a rubber band+cotton bud in hope that it would boot into fastboot after showing the charging logo once the battery is drained.
The Bootloader in Unlocked
The Previous Firmware was Indian
Windows 10