Related
Hi,
my Nexus 4 is stuck in a boot loop since 2 days. I found it turned off and assumed it crashed (has done that once or twice before), but after turning it on it's gets stuck on the boot up screen. I've tried restarting it numerous times, left it on the boot screen for hours - nothing.
I can access the recovery mode and according to most things I've found while searching the internet for a solution a "wipe data/factory reset" would hopefully do the trick, but the thing is... I haven't backed up my device in ages. (Stupid, I know.) I'm travelling and took a lot of pictures that I would hate to loose.
Is there any way to save them? I don't care for app data or anything else.
I wouldn't mind rooting it (was thinking about doing that anyway), but I'm pretty much a n00b when it comes to Android, haven't done more with it than simply using it.
I have read up quite a bit about rooting in the last two days (here on the forum and everywhere else) but I'm still not sure how exactly to do it, since all methods seem to require unlocking the bootloader and therefore deleting my photos (or just don't give much in the way of explanation).
I'm using a mac, but if necessary I also have Windows installed. I have installed Adb and fastboot following this guide.
The phone is not rooted, I don't have developer options or USB debugging enabled and it's running on 4.4.4.
I would be really grateful for help.
If you can boot into the bootloader you can install a custom recovery, I'd recommend twrp. Then booting into the custom recovery you could use adb to pull files off your device . But your bootloader needs to be unlocked. If it isn't I'm afraid you won't be able to get your photos
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
bootloop issue
A.
Try to go into safe mode and backup your data.
Boot into Safe Mode:
1. Press/Hold Power button until power menu shows up
2. Tap/Hold Power off option
3. Choose OK to reboot in safe mode
B.
For bootloop problem:
Boot into Stock Recovery
1. Power+VolUp while booting to enter recovery
2. You can release buttons after you see Google on screen
(Note: Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power)
3. Android fallen down screen - VolUp to toggle recovery menu
Now wipe Cache & Dalvik Cache in recovery and reboot the phone.
C.
If the (Option B) does not solved then try to flash the stock rom with the below given mentioned steps.
First download any stock rom and also the related usb drivers. Install the drivers into the PC.
Boot into the bootloader.
Open (fastboot.exe) Cmd prompt as admin. Put the stock rom into that particular folder.
fastboot flash bootloader filename.img
reboot the phone and return back to the bootloader.
Then, we will flash all other partitions.
fastboot flash radio filename.img
Again reboot the phone and go back into the bootloader
fastboot flash boot filename.
fastboot flash recovery filename.img
fastboot flash userdata filename.img
fastboot flash system filename.img
If you want to relock the bootloader of your device after flashing the device, put the device back in fastboot mode. Then type in the following command in the Terminal or Command Window you had opened earlier -:
fastboot oem lock
This will re-lock the bootloader of your Nexus device, restoring your warranty and putting the device back to complete stock.
I hope this helps you out.
Thank you, but is there a way to boot into safe mode if the phone isn't turned on? I can not get to the power menu since I can't turn the phone on...
I can only access the recovery menu.
Data backup
Alternate method you can do is that you have to download a software by name 'DROID EXPLORER' - (try to google it) you will find this software from the internet. Then install the software on your PC or Laptop. Once you open the software it will take some time to download the sdk files from the internet then install the windows sdk files also.
Later you go into the recovery mode with the usb cable connected to your PC. Then open the Droid Explorer software you will see your phone connected picture. Now double click and open it go to sdcard and copy all your pictures and other files to your system.
Finally, Once you backed up all your files now you can reflash with the proper rom from the recovery mode. From directly inserting the rom.zip file into the sdcard and run the custom rom after you wipe the partitions properly in recovery.
Note: Before wiping the partitions always unmount the system, data, cache and then wipe it.
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Haphim said:
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Click to expand...
Click to collapse
to confirm, have you verified you are using the correct TWRP version for your V20?
in this step "fastboot flash recovery twrp.img" is your twrp image that you saved, named twrp.img? If its not, that command won't work correctly.
usually after I flash recovery, when still in the recovery menu, i choose reboot recovery just to make sure it did stick. If it reboots back to itself, then try rebooting the device, and again confirm with manually entering recovery. Maybe overkill but it works for me LOL.
Good luck!
I am in need of big help! I made a critical error after days of trying to navigate the minefields of rooting my device. I have a LG V20 h910 and it is no one-click wonder root. It made me work for it and I finally got it. I loaded LineageOS 14.1 and all was good until the USB OTG cable from my PS4 controller did not register anymore. Damn, that was a let down, and probably led to my careless move of needing to downgrade my TWRP, saw the version I needed, forgot these are device specific, and now I'm stuck in a hard place.
Perhaps the fix is easy, but I have not found the answer after many, many searches...
I had TWRP 3.2.1-2 and needed to downgrade to 3.2.1-0 to try SuperRom (hoping it would have OTG ability). I hastily grabbed the first TWRP 3.2.1-0, threw it on the SD card, wiped everything except internal storage, and flashed the img, and did a reboot. Road block went up.
I tried getting back into recovery, did the PWR and DOWN pressing combo and got the Factory Reset screen, but after clicking "Yes" to both, instead of getting the TWRP screen, I got this error screen (attached).
I tried another idea - hooked it up USB to my PC and tried accessing it via adb/fastboot. I tried multiple drivers for my device, but no adb and no fastboot devices were ever found. The only thing that almost worked was booting phone into FASTBOOT mode by holding DOWN btn and plugging in a USB cable attached to PC. Once in FASTBOOT mode, My PC at least saw the ID for fastboot device. I tried to flash TWRP via fastboot, and it looked like it would happen, but in the end there was no phone screen response to my attempt, and the cmd window on my PC would get stuck and just hang.
Can someone please advise me on how I can fix this problem?
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
A little progress, I was unable to unlock_critical but its still hanging here
https://imgur.com/a/IdZum
jAm-0 said:
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
Click to expand...
Click to collapse
read through this and follow the steps should be good to go.
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
This is also very helpful
https://mata.readthedocs.io/en/latest/
That's the exact process I was going through, and it finally booted up.
The issue I was having was a bad usb connection which wouldn't allow me to unlock_critical.
SOLVED. Still no Magisk, we'll worry about that another time. 5hrs of troubleshooting is enough for one night.
https://imgur.com/a/ZiBzp
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
jAm-0 said:
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
Click to expand...
Click to collapse
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
wolfu11 said:
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
Click to expand...
Click to collapse
I realize all that, the issue is I cannot access any sort of recovery because I think my bootloader is defective.
For example from a cold restart if I press the power button for say 3 -5 seconds it wont boot, just boot to the Essential logo and loop. To get the phone to boot I have to hold the power down for 15-20 seconds while it bootloops a couple times then it'll boot.
Is there a possible way to reflash the bootloader software if it is defective? It's unlocked btw
There is a way to install magisk via fastboot with a patched_boot img which I'm working on. Cant seem to find the right boot img to patch for 8.1
PS Is it possible to flash .zips through fastboot? e.g. custom roms etc
Was finally able to get into recovery, so all is well. Thanks for the help yall
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
gimpy1 said:
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
Click to expand...
Click to collapse
It's really hard to say, my phone has a serious problem with it. sometimes I cant get it to boot, it will boot into the bootloader over and over and over. I've managed to get Lineage 15.1 on if for a bit until I tried to get back into the recovery which sent it manic.
I just got lucky I was able to get into TWRP and flash lineage.
my first issue not being able to flash the stock image via fastboot because I didn't unlock_critical which can sometimes fail when the usb connection is bad.
Currently flashing stock again if my phone will boot up. I'm not sure whats wrong with my bootloader but its causing a ton of havoc
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
Same boat for me - just keep rebooting to show Powered by Android Screen and then reboot again and again. Was able to see my device using fastboot devices command but all attempts to access recory just repeat the bootloop entry. I would happily check the OEM UNLOCK option in dev settings but can't even get it to book to any OS to make that option happen. Still shows bootloader locked on bootloader screen - any help someone can suggest?
I had this problem tonight also. In my case I suspect it had to do with the install of magisk in which I checked both boxes and patched the bootloader. on reboot I was stuck on boot. Just wanted to add my solution. I got the pie back to stock zip here https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 then I put it into the adb folder and ran the flashall.bat script. I tried the no wipe one and it saved my information. very happy I didnt have to resetup my phone in the end.
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
I am in the same boat. I tried to re-install the OS, but because my USB debugging was not enabled, Fastboot worked but ADB would not and since I basically wiped the recovery area, my phone will only boot into Fastboot but will not allow any loading of recovery. I would pay for someone to help. This is so hard to figure out. I have contacted Essential but since my phone is over 12 months old, the warranty has expired.
Help please. It seems like such a waste to have a bricked phone.
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
pieemme said:
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
Click to expand...
Click to collapse
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
DeathBell said:
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
Click to expand...
Click to collapse
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
pieemme said:
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
Click to expand...
Click to collapse
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
DeathBell said:
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
Click to expand...
Click to collapse
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
pieemme said:
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
Click to expand...
Click to collapse
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
DeathBell said:
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
Click to expand...
Click to collapse
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
pieemme said:
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
Click to expand...
Click to collapse
I still can't uderstand you. Can you boot into Android or not? And Does TWRP work? When you device is softbricked, what did you do to brick it?
At one point you say that you can access fastboot by choosing reboot to bootloader in TWRP and then you say that you have no working recovery at all.
Anyway I can't help you with the fastboot thing then and that file isn't Oreo it's an old version of Nougat, B360 and up is Oreo and also B321 witch is Oreo Beta. You can only flash image files in fastboot anyway as that file needs to be unpacked and put on the dload folder on your sd card.
When you want to get to Oreo you can either use service roms from this thread https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946, you need to copy the two zip files into the dload folder in your SD card. You can also use HWOTA but that wouldn't work since fastboot isn't working for whatever reason. Or when your custom recovery is working you can use HuRUpdater. But you need to be on the newest version of Nougat B210 or B209 to update as otherwise you may brick your phone.
Recently, I purchased a TicWatch Pro 2020 (saw that Kali Nethunter now seems to work on it and I thought it could be a cool device to add).
I have installed nethunter onto several other devices already (Nexus, OnePlus, etc.) and of course ran into issues. Usually I spend a long time on them and it is fun to do it. But I seem to have run into a wall recently with the watch.
When I was first trying to set up the watch, I could send commands with adb to get it into the bootloader menu but then it would not recognize it. I did eventually get the right drivers installed and had my VM recognize the watch with the ADB drivers.
I did manage to complete Step 1 of the tutorial https://www.kali.org/docs/nethunter...-on-the-ticwatch-pro/#1-unlock-the-bootloader
(unlocking it).
I went through to step 2, put it into bootloader again and flashed the vendor and twrp .img files. Once I did this, I tried to switch the device into recovery mode (after it went back to the bootloader menu on its own) as per instructions. But the weird thing is when I initialized recovery mode, it just sent me back to the bootloader menu, all while also not recognizing it on my VM/PC at all. When I tried to start the watch, it just sent the device into a permanent loading loop (after showing the logo and cycling the 4 different colored Google dots around the watch). I can get it back into the bootloader menu by holding both buttons down but I can't get my device to be recognized with a data connection (so it seems effectively bricked).
Normally I look this up myself but since there is not much information regarding this device and this specific rom out there just quite yet, I can't locate anything (compared to troubleshooting the OnePlus 7 Pro). Any ideas or input is appreciated!
Edit: will just let it run over night (drain battery to see if it may or may not help).
Thought I would leave a quick update in case you may be running into this issue yourself.
I let it run over night and run out of power to see if it would do anything. It now seems to be recognized by my pc, but it would not connect. I am installing everything through a VM but it appears that the PC could not recognize the device (I only had drivers installed on my VM, not my main device). When I installed the drivers on my main desktop it began to recognize it again on my VM. Not sure why this was an issue or how it became one or if it was a combination between everything but now at least I can send adb and fastboot commands to my watch again. Will try to flash a stock rom for it and try again to get out of the boot process (still confused as to why it will not go into recovery mode but it instead goes back into boot loader mode when I select it)...
Another update: I managed to find a stock image and some simple instructions. Credit to @sonnettie as it looks like it is working atm (going through setup).
Link: https://forum.xda-developers.com/t/ticwatch-pro-2020-stock-image.4107539/
Going through to try installing nethunter again if it appears to be fully functioning.
Edit: Using the stock image seems to let me now use my watch again. But whenever I try to install Nethunter, I install the vendor and recovery image. Once I do this and try to go into recovery mode, it just seems to bring me back to the boot loader menu. Anyone have solutions or know what is wrong?
i got nethunter and twrp working on the ticwatch 2020, it was a pain finding the right files to use and i soft bricked my watch many times in the process.
https://forum.xda-developers.com/t/...shark-4g-ticwatch-c2-skipjack-9aug20.3821013/ this post has the right vendor.img and twrp recovery image, in particular this mega folder https://mega.nz/folder/cVVBRaxL
1-Vendor-Images-22-Jun-2020.zip unzip this file it is located in TicWatch-Pro-2020(Catfish-ext)/Custom-ROM/ROM/22-Jun-2020 it contains the vendor.img you'll need
tic-watch-pro-2020-twrp.img in TicWatch-Pro-2020(Catfish-ext)/Custom-ROM/TWRP this is the TWRP Recovery.img you'll need
Magisk-v21.0.zip and nethunter-2022.2b-ticwatchpro-wearos-kalifs-nano.zip are both needed from the TicWatch_Pro_NetHunter_files.zip at https://build.nethunter.com/contributors/re4son/catfish/
1) Enable ADB and unlock bootloader then enter these fastboot commands on pc
fastboot flash vendor.img
fastboot format userdata
fastboot format cache
fastboot flash recovery tic-watch-pro-2020-twrp.img
2) Reboot into WearOS and Setup Watch
3) Enable ADB again and reboot into recovery
adb reboot recovery
4) move Magisk-v21.0.zip into the TWRP folder on the watch
install Magisk-v21.0.zip from TWRP recovery (it'll patch the boot.img itself)
5) Enable ADB Sideload from the Install menu in TWRP
adb sideload nethunter-2022.2b-ticwatchpro-wearos-kalifs-nano.zip
6) Reboot into wearOS with kali splash screen, you will have to open the magisk app after you open the nethunter app to give it root as there isn't a proper pop-up screen to give root access
**circle screen does semi cut off a few buttons in the nethunter and magisk apps, touch your watchface close to the "corner" where it is to select it
I hope this all helps! Cheers mate
unidentifieduser said:
Another update: I managed to find a stock image and some simple instructions. Credit to @sonnettie as it looks like it is working atm (going through setup).
Link: https://forum.xda-developers.com/t/ticwatch-pro-2020-stock-image.4107539/
Going through to try installing nethunter again if it appears to be fully functioning.
Edit: Using the stock image seems to let me now use my watch again. But whenever I try to install Nethunter, I install the vendor and recovery image. Once I do this and try to go into recovery mode, it just seems to bring me back to the boot loader menu. Anyone have solutions or know what is wrong?
Click to expand...
Click to collapse
i just realized i typed all the above and didn't reply to your message, it was a mixture of two install methods with leaving out the flashing of the rom file itself