Oneplus 5 with no recovery or firmware - OnePlus 5 Questions & Answers

Hi there. My friends phone switched off during an update and basically it's bricked. It appeared trapped in a boot loop at first. However recovery mode is gone. It wont load. Also by looking at the bootloader, im not sure it has any firmware left in it. It shows nothing for bootloader or base band numbers. I tried downloading firmware for it but it needs to be flashed in recovery mode so im stuck and can't do it. Does anyone know how I would recover this phone?

Digideath said:
Hi there. My friends phone switched off during an update and basically it's bricked. It appeared trapped in a boot loop at first. However recovery mode is gone. It wont load. Also by looking at the bootloader, im not sure it has any firmware left in it. It shows nothing for bootloader or base band numbers. I tried downloading firmware for it but it needs to be flashed in recovery mode so im stuck and can't do it. Does anyone know how I would recover this phone?
Click to expand...
Click to collapse
Here's the unbrick guide: https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706

Thank you. That is exactly what I needed.

Related

[Q] Entering Download mode while stuck in a bootloop

Hello,
this could be a silly question, but I'm actually hopeless about it...
I've been using CloudyG3 for 3 days, but I had some problems about it, so I decided I'd revert back to stock. I entered the Download Mode, installed the V20D ROM using LG's Support Tool, and, when the phone restarted, tried to enter the Factory Reset screen. Try as I might, I couldn't do that, so I'm stuck in a bootloop (I mean, the LED indicator is flashing, but no LG boot animation - just the static logo. I think there could've been some problem while flashing the FW, that's why I would like to enter Download mode again, or maybe at least turn my phone off (it can only restart). Nevertheless, while trying to flash the FW again while in a bootloop, everything from model no. to firmware version installed is shown correctly, but it can't boot into Download mode.
Thanks in advance!
a5943 said:
Hello,
this could be a silly question, but I'm actually hopeless about it...
I've been using CloudyG3 for 3 days, but I had some problems about it, so I decided I'd revert back to stock. I entered the Download Mode, installed the V20D ROM using LG's Support Tool, and, when the phone restarted, tried to enter the Factory Reset screen. Try as I might, I couldn't do that, so I'm stuck in a bootloop (I mean, the LED indicator is flashing, but no LG boot animation - just the static logo. I think there could've been some problem while flashing the FW, that's why I would like to enter Download mode again, or maybe at least turn my phone off (it can only restart). Nevertheless, while trying to flash the FW again while in a bootloop, everything from model no. to firmware version installed is shown correctly, but it can't boot into Download mode.
Thanks in advance!
Click to expand...
Click to collapse
Have you got a power source connected ?
timlad said:
Have you got a power source connected ?
Click to expand...
Click to collapse
Thanks for your reply!
No, I don't.
EDIT
I'm really grateful to you for your suggestion. Having plugged the device in, the Download mode came up with no problems. Now I'm trying to flash the previous version - V20B, which might make my device usable again.
Thank you very much!

[SOLVED] Bootloop. No recovery. Bootloader locked.

================================
Solution: http://forum.xda-developers.com/one...bootloader-locked-t3212187/page2#post63494201
================================
Hello,
This afternoon, I was preparing to flash Oxygen OS 2.1 through twrp but I wanted to make a backup first. Attempting to load up twrp by holding Vol- and Power, my OPT flashed the starting frame of the boot animation for half a second before turning off. This repeated every 5 seconds. I could still boot OOS normally at this stage.
I decided to reflash twrp so as to make the backups, but on attempting to flash it, I saw that my bootloader was locked. So into fastboot mode I went, but trying to unlock it, it did the same as trying to get into recovery. As soon as I sent the command, "fastboot oem unlock", the screen went dark, flashed the starting frame for the boot animation, and promptly when dark again.
I now can't boot up normally, nor can I enter recovery. I can access fastboot mode, but I can't seem to make any changes.
I've attempted to use this solution as well as several other similar ones with no success.
I've had my OPT since 17th of August with absolutely no signs of trouble until this afternoon.
To me, it seems like it could be a hardware issue, but I'd hope it would last more than 40 days.
Any suggestions?
Thanks.
----
x-post: whirlpool, reddit
The same just happened to me, wtf
Makrilli said:
The same just happened to me, wtf
Click to expand...
Click to collapse
What were you doing before it occurred? Perhaps we can work out the cause.
GusGold said:
What were you doing before it occurred? Perhaps we can work out the cause.
Click to expand...
Click to collapse
I'm not sure what I was doing, I was going to flash different ak kernel as my wifi didn't work.
HOWEVER
I read someone suggesting if you still have bootloop after trying the qualcomm recovery tool, try booting to fastboot and use: fastboot continue
my opt booted nicely to hydrogen os and after I shut it down it no longer bootlooped and I was able to get to recovery.
I'll post this to your reddit thread too, maybe it might help somebody one day, hopefully this works for you too
Makrilli said:
use: fastboot continue
Click to expand...
Click to collapse
Mate! that worked for me too!
However... It only seems to skip the bootloop for that power on. After power off, it returns to the boot loop. I also still can't unlock the bootloader and can't access recovery.
But at least it can boot into OS with fastboot continue!
Thank you.
Weird, after the first successful boot I rebooted and a chinese menu prompted me if I wanted to unlock the bootloader, and I did.
Maybe you should try different recovery packages.
But I'm glad to hear you at least got past the boot loop
Makrilli said:
Maybe you should try different recovery packages.
Click to expand...
Click to collapse
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
GusGold said:
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
Click to expand...
Click to collapse
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Makrilli said:
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Click to expand...
Click to collapse
Ahh, do you mind linking me to the one you used?
I think I used this: https://mega.nz/#!EsNQHKab!ifATzg4rxxBniPad0iyxANqlN8cZpUx2MVWaZgEhrD4
but it might have also been this: https://drive.google.com/file/d/0B14IjYN3PtxcSlJ5aGQxX3JERHM/view?usp=sharing
It's also worth mentioning I flashed both a few times before I tried the fastboot continue command so try both a few times and see if that helps, also I replaced the stock recovery with twrp in both recovery packages before flashing.
Edit: And best of luck, I'm rather confident your OPT is going to work properly again.
Boot Loop
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
p3wb said:
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
Click to expand...
Click to collapse
And I'm guessing you have tried the qualcomm recovery tool?
And I'm guessing you have tried the qualcomm recovery tool?[/QUOTE]
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
p3wb said:
And I'm guessing you have tried the qualcomm recovery tool?
Click to expand...
Click to collapse
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.[/QUOTE]
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT
Makrilli said:
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
Click to expand...
Click to collapse
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT[/QUOTE]
I finally got my OPT working again, tried Qualcomm recovery tool, wasn't able to complete the "MSM8994DownloadTool"
So i downloaded "A2001_14_A.03_150805" in a guide from technobuzz.net/unbrick-oneplus-2/
A similar but it does a entire wipe of the phone, nothing left at all. WARNING!
But i was okey with it.
Well the phone was in Chinese when it was all done but to change language was no problem.
I finally managed to solve it on mine. I had been cautious over the past weeks to not let it run out of battery or get turned off while away from my computer as
Code:
fastboot continue
was the only way I could get past the boot loop.
My core issue to solve was that I couldn't get it recognised as the USB Diagnostic 9006 under Ports in Device Manager. I installed the driver from here manually by right clicking the /qcser/x64/qcser.inf file and selecting install from the context menu. Then, I powered off my OP2. While only holding Vol+ (not power or Vol-), I plugged in my OP2 to the computer and it was finally recognised as the 9006. Then using the recovery tool from the prior link, it installed and rebooted my OP2. The moment of truth was when it rebooted and didn't enter a boot loop!
Then with the Chinese recovery prompt, I selected the top/first option and it brought me to the welcome/first setup screen of OOS.
It wiped the internal memory, and installed OSS 2.0.2 (don't know if coincidence or not as that was my prior OS as well). Now to install twrp and update to the latest OOS hopefully without a hitch.
Happy to finally know it wasn't a hardware issue like a failed eeprom or a dud nand controller as my prior phone (Samsung Note 10.1) died to a failed nand controller as well.
Will update with news of twrp and OOS, but I feel that should go smoothly now. Thanks to the others that helped in this thread too!
Yeap, all good!
Flashed official twrp through fastboot and batch installed OOS2 through 2.1.1 patches and SuperSU. Everything working like new!
Phew.
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
gamdiiii said:
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
Click to expand...
Click to collapse
Is it recognised as a USB Diagnostic 9006 in your device manager?
Hi GusGold No its 9008

[Help me] Hard Brick S8?

SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.
Hello
I have the same Problem
No boot, nothing
It only shows the Bootlogo
I cant flash Recovery anymore, only get failed
I can only go to Download Mode
What is this a new block by Samsung
I really hate Samsung!
Hope there is any help
Sent from my SM-G920F using XDA-Developers Legacy app
callumbr1 said:
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.
Click to expand...
Click to collapse
I have tried that as well. I tried again this morning and still the same issue. I load up all the files that are need for the stock flash and once in odin and I hit start the process starts but then says fail.
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app
Denis Meissner1990 said:
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm gonna give this a try!!!
What was the link that you used to get the firmware? I know sammobile the free download servers are down for maintenance
I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app
Denis Meissner1990 said:
I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop
I_Love_My_Brick said:
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop
Click to expand...
Click to collapse
Sry for late answer :/
Have you tried to dl BatManRom again?
Maybe your dl wasn't successful
Try again, should work
I also installed BatManRom ?
Best Rom out there
Install BL and CP from BatManRom via Odin, then boot in TWRP
Advanced wipe all except external and then flash Rom
Choose your Settings, no need to install BL and CP again
after install, Reboot, wait for around 10 mins, then Setup System and all should work fine ?
Cheers
Sent from my SM-G950F using XDA-Developers Legacy app
I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Hey same happened to me if you still need help ask me. I can send you my number through email and you can call me.
Hello to day i got an Hardbrick S8+ (HK region its G9550ZHU....) , its only detect by QHUSB 9008 and nothing more (no charge, no downloadmode , nothing .... just 9008 ) . The victim say he is trying to flash Combine file from octoplus box but the file have G9550ZCU , he want to bypass FRP lock. So any one have a idea ?
pardon
kertikhuseyin said:
pardon
Click to expand...
Click to collapse
You need the edl firehose and XML files and the software for recovering from a brick like that.
And frp bypass is not an allowed subject here because people who ask tend to have a device that is likely stolen
Hi guys,
I have big problem with my new G950F. I try to install custom recovery (twrp) via ODIN. I do it like I suposs to do. All was be fine. ODIN pass but now my phone won't turn on. They don't respond to anything , recovery buttons and download butont nothing. They take 0,16 A and computer dont recognize it.
After flashing custom recovery phone was be powered down when samsung logo appears. after that phone doesn't respond to anything.
I was try:
Download combo - 2 min
Recovery combo - 2 min
Restart combo - 5 min
JIG 301K (work on A510F) - also nothing happens.
what I can do?
Someone please help. Thanks

stuck in bootloop

i have read through these forums for weeks and followed steps perfect but no version of Odin will succeed in doing a factory rom flash. i had the s4 rooted and uninstalled the touchwiz not realizing it was the launcher required to boot phone. since this happened i cant do a factory reset and odin will not work. in fact last time i tried odin it put my phone in a bootloop where as soon as i put the battery in it boots and continues to reboot. this phone has a locked bootloader and come stock with 4.4.2 i dont want to post a really long post with a bunch of info thats probably not needed so if more info is needed please ask. thanks in advance
If the phone constantly auto-reboots, then your power button is malfunctioning.
As for the other cases, use a different PC, Windows and/or USB ports. A cable switch is advisable too. And make sure you have the right firmware for the phone.
Any of those factors can make a change.
Also, unless it's a Verizon or AT&T phone, there's absolutely no possible way that thing has a locked bootloader.
I have a bootloop on the Samsung first logo with "Recovery Booting..." in blue on the top left (Samsung GT-I95026)
I have flash TWRP recovery, the phone don't want to boot on recovery, it's just bootlooping, flashed stock firmware with Kies, still bootloop, Odin, same thing
So after searching everywhere can't seem to find anything that can help, I assume it's dead then?..
bootloop stopped
Pwnycorn said:
If the phone constantly auto-reboots, then your power button is malfunctioning.
As for the other cases, use a different PC, Windows and/or USB ports. A cable switch is advisable too. And make sure you have the right firmware for the phone.
Any of those factors can make a change.
Also, unless it's a Verizon or AT&T phone, there's absolutely no possible way that thing has a locked bootloader.
Click to expand...
Click to collapse
phone has been sitting like 2 weeks with no battery and after your post i tried to boot to factory reset. it shows the recovery boot at the top of the screen but just goes to a half lit screen and does nothing.this phone wasnt even 2 weeks old when i bricked it. i use the factory oem cord plus have tried others. i have even tried a fresh install of win7 on my second hdd in this laptop with no changes to anything got my firmware here :sammobile.com/firmwares/search/sgh-1337
and yes this is an at&t phone factory unlocked with locked bootloader
soft brick fixable
Bastidn said:
I have a bootloop on the Samsung first logo with "Recovery Booting..." in blue on the top left (Samsung GT-I95026)
I have flash TWRP recovery, the phone don't want to boot on recovery, it's just bootlooping, flashed stock firmware with Kies, still bootloop, Odin, same thing
So after searching everywhere can't seem to find anything that can help, I assume it's dead then?..
Click to expand...
Click to collapse
i have read through these forums a lot trying to fix my s4 and im under the impression that if you can get to odin mode then the phone is "softbricked" and can be fixed.
freezes at at&t screen
galaxys4bricked said:
phone has been sitting like 2 weeks with no battery and after your post i tried to boot to factory reset. it shows the recovery boot at the top of the screen but just goes to a half lit screen and does nothing.this phone wasnt even 2 weeks old when i bricked it. i use the factory oem cord plus have tried others. i have even tried a fresh install of win7 on my second hdd in this laptop with no changes to anything got my firmware here :sammobile.com/firmwares/search/sgh-1337
and yes this is an at&t phone factory unlocked with locked bootloader
Click to expand...
Click to collapse
since that post i tried the factory reset and the phone just boots then stays frozen on the at&t screen
flashed and fixed
galaxys4bricked said:
i have read through these forums for weeks and followed steps perfect but no version of Odin will succeed in doing a factory rom flash. i had the s4 rooted and uninstalled the touchwiz not realizing it was the launcher required to boot phone. since this happened i cant do a factory reset and odin will not work. in fact last time i tried odin it put my phone in a bootloop where as soon as i put the battery in it boots and continues to reboot. this phone has a locked bootloader and come stock with 4.4.2 i dont want to post a really long post with a bunch of info thats probably not needed so if more info is needed please ask. thanks in advance[/QUOTE
i got my s4 flashed with stock rom from this thread:
forum.xda-developers.com/showthread.php?t=2674223
if anyone has the same issues i had with odin not working try that rom.....thanks for those of you who helped me
Click to expand...
Click to collapse
galaxys4bricked said:
if anyone has the same issues i had with odin not working try that rom.....thanks for those of you who helped me
Click to expand...
Click to collapse
Is there any way to unlock bootloader in ODIN? I have I9506 with 4.4.2 that was on it at first. Then i have updated it to 5.0.1 in OTA. So you say that I need to flash it in ODIN with 4.4.2 to make it work?
None of the Galaxy s4 phones have a locked bootloader except for the AT&T, Sprint, Verizon versions.
GT-I9506
S/N: RF8F20W841T
PDA: PL2 / PHONE: OJ2 / CSC: OK1 (NEE)
CAN'T BOOT IN TO THE SYSTEM (no matter what I can't make it to boot properly)
CAN'T ENTER RECOVERY (it's showing that's booting in to the recovery but instead of recovery it just restart)
CAN ENTER DOWNLOAD MODE (no problem with entering DM)
What I have done so far:
- Kies recovery with phone model number and serial number (still bootloop).
- Odin flashing STOCK rom from SamFirm download (still bootloop) (single and 4 files flash).
- Re-partitioning (flashing PIT file).
- Reflashing bootloder (still nothing).
- Tryed CWM, TWRP and other Recovery, non of them boot up.
Using those files to flash:
AP_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_lo w_ship.tar
BL_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_lo w_ship.tar
CP_I9506XXUDOJ2_REV00_CL1318424.tar
CSC_NEE_I9506NEEDOK1_CL6069869_QB7017077_REV03_use r_low_ship.tar
I would really appreciate help from someone more skilled then me.

Bootloop followed by blue screen with android and: Erasing...

Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
LuDi_GliSa said:
Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
Have you tried flashing with the same file?
Maybe the file is corrupt. Try redownloading and then trying
LuDi_GliSa said:
Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
I'm having the same problem. Using the binary U5 "combination" file, I was able to access the system and enable OEM unlocking, so I could install TWRP and then a Custom ROM. But that's it, I can't use ROM Stock anymore, my phone only works if it's in a Custom ROM. I wanted to solve the problem so I could use Stock again. Bottom line: In ROM Stock, the phone is locked under the name SAMSUNG GALAXY S7 EDGE, enters recovery and appears "ERASING" then erases and repeats everything again, never starting the system or having access to Recovery.
Sorry for the bad english, I used translate ...
Hey! Look this video, he works for me!!
https://www.youtube.com/watch?v=l8-ccufk4Q0

Categories

Resources