[Help me] Hard Brick S8? - Samsung Galaxy S8 Questions and Answers

SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!

I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.

Hello
I have the same Problem
No boot, nothing
It only shows the Bootlogo
I cant flash Recovery anymore, only get failed
I can only go to Download Mode
What is this a new block by Samsung
I really hate Samsung!
Hope there is any help
Sent from my SM-G920F using XDA-Developers Legacy app

callumbr1 said:
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.
Click to expand...
Click to collapse
I have tried that as well. I tried again this morning and still the same issue. I load up all the files that are need for the stock flash and once in odin and I hit start the process starts but then says fail.

https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app

Denis Meissner1990 said:
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm gonna give this a try!!!
What was the link that you used to get the firmware? I know sammobile the free download servers are down for maintenance

I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app

Denis Meissner1990 said:
I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop

I_Love_My_Brick said:
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop
Click to expand...
Click to collapse
Sry for late answer :/
Have you tried to dl BatManRom again?
Maybe your dl wasn't successful
Try again, should work
I also installed BatManRom ?
Best Rom out there
Install BL and CP from BatManRom via Odin, then boot in TWRP
Advanced wipe all except external and then flash Rom
Choose your Settings, no need to install BL and CP again
after install, Reboot, wait for around 10 mins, then Setup System and all should work fine ?
Cheers
Sent from my SM-G950F using XDA-Developers Legacy app

I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Hey same happened to me if you still need help ask me. I can send you my number through email and you can call me.

Hello to day i got an Hardbrick S8+ (HK region its G9550ZHU....) , its only detect by QHUSB 9008 and nothing more (no charge, no downloadmode , nothing .... just 9008 ) . The victim say he is trying to flash Combine file from octoplus box but the file have G9550ZCU , he want to bypass FRP lock. So any one have a idea ?

pardon

kertikhuseyin said:
pardon
Click to expand...
Click to collapse
You need the edl firehose and XML files and the software for recovering from a brick like that.
And frp bypass is not an allowed subject here because people who ask tend to have a device that is likely stolen

Hi guys,
I have big problem with my new G950F. I try to install custom recovery (twrp) via ODIN. I do it like I suposs to do. All was be fine. ODIN pass but now my phone won't turn on. They don't respond to anything , recovery buttons and download butont nothing. They take 0,16 A and computer dont recognize it.
After flashing custom recovery phone was be powered down when samsung logo appears. after that phone doesn't respond to anything.
I was try:
Download combo - 2 min
Recovery combo - 2 min
Restart combo - 5 min
JIG 301K (work on A510F) - also nothing happens.
what I can do?
Someone please help. Thanks

Related

[HELP] SM-G7102 Recovery Mode issue

Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Sanjuujosephh said:
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Click to expand...
Click to collapse
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Sanjuujosephh said:
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Click to expand...
Click to collapse
After I flash the firmware it automatically goes to a recovery screen, a progress bar gets filled then opens the Android system normally. After that when I try to go to recovery mode again it goes back to download mode again with the error text "Could not do normal boot".
Problem.... Fixed? .___.
Well for some reason on the third (and thought it's hopeless) attempt to flash the firmware again, I managed to open recovery mode after it, I was kissing the Reset Factory button.
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
اقرأ الموضوع اللي كتبته خصوصي للجراند 2 بنظام كت كات
رسالة Could not do normal boot طلعت بسبب استخدام ريكفري قديم ع الكت كات
الموضوع الجديد فيه ريكفري جديد.
Help me plzz
hey.... wht did u do evn i m stuck there??? plzzz help..got KitKat on my Grand 2 got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot"
citBabY said:
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Click to expand...
Click to collapse
i think you should reset your phone
and if it doesn't work then try another country's rom
thankyou
hey bro, I have problem same to u..
Bro...I have same problem..?? I cant go to recovery mode showing Could not boot normally...etc..This happened after I tried CWM using Odin ..I always go download mood and...when i pressed factory reset button ..it didnt rest and go download mode again...plz help me bro...thanks
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.[/QUOTE]
Bro, please don't use king root or any other root.
Solution
Please download the stock firmware and then go to download mode flash the stock firmware and root your phone again. Then recovery mode will work.
Thank you
Sorry for errors.
Sent from my SM-G900H using XDA-Developers mobile app
I'm a newbie but I fixed mine...
I've had this happen and it is frustrating to say the least. But I fixed it though. This is what I did: CAVEAT: Please read up all the FAQs, search the right firmware for your phone and the appropriate versions, KitKat vs Jelly Bean, etc. otherwise if your phone is bricked...don't blame me.
I have a 2nd-hand Galaxy Grand 2 and so warranty issues are a non-issue for me. All the files I've found were downloaded on this forum. I flashed ROM with my PC with Odin program installed.
I used Odin3 (v.3.07). (To install Odin program search the this forum). I also reflashed the recovery TWRP file "twrp_ms013g-build2.tar" Including the firmware G7102 Stock. My file was: G7102DDUBOB1_G7102ODDBOB1_G7102DDUBNK1_HOME.tar.md5. (Search for it.) Oh, you may want this file: CF-Auto-Root-ms013g-ms013gxx-smg7102.tar.md5 which may help with rooting your phone if you haven't already done so.
I did the Recovery 3-button Samsung phone groping procedure (you know what I'm talking about Volume Up/Down button + power + home button)... but to no avail...I keep getting that boot loop (Unable to normal boot...etc). You know that stupid "Downloading" Android logo (with the blue worded script on the top left-hand corner) with message ..."Downloading ...Do not unplug source..." Well, I plugged the USB cable to the phone to my computer and Odin program recognized it (it'll read "Added"). The phone didn't give any indications that it was doing anything. Btw, if your Odin program doesn't recognize your device then you should find out why it doesn't. If it recognized it before and you flashed with the Odin program before, I don't see why it won't recognize it now? Some say it's the USB cable but I can't logically accept that kind of superstitious BS. Come on, it's a copper/aluminum wire cable wrapped in pvc -- not a script. A cable is a cable is a cable. If it worked before, it'll work again unless it's cut inside the pvc tubing. You can use a digital multimeter to easily test that for continuity (albeit with really tiny leads to be able to connect to the mini USB side). Anyways, if your Odin program won't recognize your phone, maybe try using a lower version, or re-installing, or another similar type of program that will work. I'm assuming you did install the Samsung USB driver for your PC (e.g. mine is -v1.5.61.0 -search for your appropriate version) so that your computer will recognize your phone when cable is hooked up.
DON'T FORGET TO have the "Auto Reboot" and "F. Reset Time" boxes checked on the Odin program. Then select PAD button and browse for your TWRP file (above) and hit "Start." The Odin will flash it and you'll see a light blue bar under the Android logo (on your phone) that will go from left to right and when finished....whooooohooo the phone auto restarts back to your last OS state without losing any info on the phone. At least it worked for me. Hope that helps. Sorry for the long post.
hi i am in official android 4.3 on my g7102 and i wanna install a recovery file. but every recovery file i tested dosnt work on android 4.3. can you help me?
If u have knox bootloader do not try to downgrade just get kitkat one and in odin check phone bootloader update
Seems like u really guys screwed up the recovery. Somehow on my first try of flashing a zip file (recovery), i got stuck on download mode and wont boot normally. When I fixed the problem, the phone boots normally but the recovery is the only problem I got. I fixed this problem for about 10 days ago, all i did was to reflash the recovery again, orrr flash other version of the recovery (if the downloaded recovery version didnt work) or flash other recovery if the another recovery didnt work. Make sure the recovery is working on the version of you're phone (jelly, kk, lollipop, marshmallow or nougat) and working also on the model version.
I know this is an old thread but I hope this reply helped
hello guys.
first i will start with the beginning. i have a grand 2 duos g7102 phone. i rooted the phone and installed CWM recovery in order to flash custom rom CM 12.1 Lollipop 5.1.1 everything was running well until i upgraded to CM 14 Nougat 7.0 COSMO, i didn't like it and when i wanted to get in recovery mode again it stopped working. Now i can't boot in recovery mode at all. Not showing CWM recovery like before only recovery booting for few second and after that the dead android and No command and there is more writing down the screen like Supported API: 3 but it is hard to read because the screen is always flashing.
i someone faced this problem before please help !!!
thanks in advance
Guys guys i had the same problem with my grand 2 7102.
I rooted my phone and flashed a recovery via odin.
But as i press the button combos it says. Could not do normal boot.
So, i found a solution for it.
Downloaded flashify for play store.
Extracted img. File of twrp recovery provided in the grand 2 thread 😬,
Flashed it with flashify
And guess what i was in the recovery and after that no problem came with the recovery flashing 🙂
If you guys keep having problems with no-pc flashing, try the pc flashing cause this is the better way of flashing other than apps.
I had the could not do normal boot problem
Do this ...
Google cwm test 4.4 ms013g.tar and download it
Put it in PA or PDA uncheck autoreboot keep freset time checked
Flash the file then when you get pass message in odin , remove battery and reinsert it and go to recovery mode directly with vol up + power button.
NOTE : Don't try to normal boot to system

S5 G900F - Infinite Bootloop, can't access bootloader, flashed with stock roms.. HELP

Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
didscub said:
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
Click to expand...
Click to collapse
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Cryceratops said:
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Click to expand...
Click to collapse
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
didscub said:
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
Click to expand...
Click to collapse
Did you try the one I linked to you or a different one?
Cryceratops said:
Did you try the one I linked to you or a different one?
Click to expand...
Click to collapse
Only just saw that - I didnt - thank you.
I will try now but may take a while to get back to you while I wait to download.
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
*Detection* said:
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
Click to expand...
Click to collapse
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
didscub said:
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
Click to expand...
Click to collapse
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
*Detection* said:
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Click to expand...
Click to collapse
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
didscub said:
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
Click to expand...
Click to collapse
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
didscub said:
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
Click to expand...
Click to collapse
BOJ1 yea, same one
Try different versions of ODIN, 3.09 up to 3.10.7 (Maybe even 3.07)
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
didscub said:
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
Click to expand...
Click to collapse
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
*Detection* said:
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
Click to expand...
Click to collapse
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
didscub said:
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
Click to expand...
Click to collapse
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
*Detection* said:
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
Click to expand...
Click to collapse
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
didscub said:
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
Click to expand...
Click to collapse
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
*Detection* said:
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
Click to expand...
Click to collapse
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
didscub said:
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
Click to expand...
Click to collapse
You don't need busybox, that's for creating your own debrick image, the tutorial stops here:
Flash this Debrick file to your 16GB Micro SD card with Win32DiskImager
*Insert your Micro SD card into your computer (backup any information you may have on it we are going to ERASE, FORMAT it to ex FAT
*Open win32DiskImager
*Navigate to the location where you downloaded the correct Debrick file
*Select your Debrick file by double clicking on it
*In the upper right corner of Win32DiskImager you should make sure that the drive letter assigned to your sd card is selected.
***Which ever drive that is listed will be erased, formatted
*Click write in the bottom right hand side
put the Debrick SD card in the Phone, Pull and Replace the Battery
Plug phone in usb and boot into download mode
yout phone should boot into download mode then flash stock firmware via odin
Download link : https://drive.google.com/file/d/0ByA...ew?usp=sharing
You're saying you can't see anything on screen in download mode, just guessing it's there because it cools down - but that could also mean it's not in any mode
With this method, you might get a display to use, then you can flash normally with ODIN with download mode visible on screen

SM-G950F won't boot, hard bricked?

I had to reboot my device due to problems with my speaker. Now i'm not able to boot anymore.
I'm only able to get into ODIN Mode, and flashing new FW or TWRP does nothing. It'll flash correctly, but as soon as it sends the reboot command the device powers off and does not boot, and no, it does not reach the "Galaxy s8, powered by android screen".
It does not want to power on, and only responds to the odin button combo, can't boot into recovery either since nothing works.
I was running the latest version of Renovate Ice if that matters.
I've searched trough some other threads, but it seems like i'm the only one that's having this problem.
Any help or thoughts would be greatly appreciated!
Edit 1: I've tried flashing both AQK7 and AQG5. Both flash fine, but as soon as odin sends the reboot command to my phone, it turns off and does not turn on.
Auto Reboot is ticked. Same goes for any version of TWRP, it will flash, but when it has to reboot the device turns off and does not turn on. There's nothing on the screen, its completely black and the only thing that does work is Download Mode. I've also tried ereasing nand, and repartitioning storage. Both seem to have 0 effect. As stated in one of my replies, i was running the latest build of renovate-ice with magisk, no other mods, or themes installed.
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
FloM94 said:
Im a bit confused - you can only boot into download mode (not into twrp?) and the phone is in bootloop? Have you flashed anything (mod?) before or activated a substratum theme which could cause this?
The only thing I can think of is a) you delete in twrp file manager the corrupted file, if there is something like this or b) a twrp restore from a backup. Boot into download mode and then do not press vol up to go into odin mode but press vol down to reboot - then immediately press the combo for twrp and you will get to the recovery. This helped my s8 many times when I was in a bootloop and couldnt boot up twrp
Click to expand...
Click to collapse
Thanks for the reply! Other than using the Renovate-Ice rom, and running magisk the thing was pretty much stock. wasn't messing around in twrp either. Its not stuck in a bootloop either, it just refuses to do anything other than go in and out of DL mode. The phone does not respond to any button imputs other than DL mode. As stated in the OP it does not boot at all, just a black screen. i've already tried to reflash a stock FW and TWRP, but that does not seem to work...
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
More info about your speaker problem
popmpopm said:
More info about your speaker problem
Click to expand...
Click to collapse
There isn't much to say about the problem ,it just stopped working, hence why i rebooted the phone, and ran in to the problem i'm having right now.
FloM94 said:
try the method I did - this is the last thing I could think of, before reflash the whole phone with odin
Click to expand...
Click to collapse
Doesn't work sadly, but thanks for the help anyways!
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Jostian said:
if you can get into download mode then get into download mode and leave phone, then download samsung smart switch for your pc (older version like 4.1.17022_20 from here http://www.filehorse.com/download-samsung-smart-switch/29268/ that allows phone based recovery), once installed open it, then click on more at top right, (do not update the software if you get a prompt) select emergency device recovery...., then click on right tab (device initialisation) and fill in your phone details etc., connect your phone (in download mode) and follow the process, maybe it works, you'll need to root and install TWRP again but thats no big issue.
Click to expand...
Click to collapse
I've tried this just now, and it still gives me the same result, it goes trough the process, but as soon as it has to reboot it doesn't boot anymore.
Thanks for the suggestion though!
FloM94 said:
but you havent installed Viper4Arise or anything like that?
Because of this my speaker also stopped working a few weeks ago
Click to expand...
Click to collapse
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
popmpopm said:
i think phone is damaged by water or dropped s8 so fragile phone ! its happen to me with s5 the phone dead after speaker problem !!
Click to expand...
Click to collapse
I've had a case on the phone since day one, and I've checked for water damage, but there is non. The tab that is supposed to indicate it is untouched. But thanks for your input! I appreciate it
I have the same problem. Its look like is bootloader issue. try flash this soft :
G950FOWA1AQCC_Recovery
But if you are on newest rom it wont work.
Hello, you can solve this problem?

Bricked S8s after software update.

Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.
yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....
Okay, will give that a try.
TWRP?
TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Can't get them to power on. Buggered
simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try
Will try that
Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything
Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail
Hi you should try flashing official firmware
itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.
Anyone want two bootlooped S8s? Hahahaha
simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.
All been attempted

Bootloop followed by blue screen with android and: Erasing...

Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
LuDi_GliSa said:
Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
Have you tried flashing with the same file?
Maybe the file is corrupt. Try redownloading and then trying
LuDi_GliSa said:
Hello everyone,
I have problem with my s7, after trying to flash stock several times using odin, I am always getting s7 logo, and than blue screen with Erasing... , than it would restart with same pattern two or tree times and than shut down. I can only go in download mode, cant boot into recovery.
My phone is SM-G930F. I am pretty sure that I downloaded correct firmware. Maybe I did mess up something, any help is welcome.
Thanks in advance.:fingers-crossed:
Click to expand...
Click to collapse
I'm having the same problem. Using the binary U5 "combination" file, I was able to access the system and enable OEM unlocking, so I could install TWRP and then a Custom ROM. But that's it, I can't use ROM Stock anymore, my phone only works if it's in a Custom ROM. I wanted to solve the problem so I could use Stock again. Bottom line: In ROM Stock, the phone is locked under the name SAMSUNG GALAXY S7 EDGE, enters recovery and appears "ERASING" then erases and repeats everything again, never starting the system or having access to Recovery.
Sorry for the bad english, I used translate ...
Hey! Look this video, he works for me!!
https://www.youtube.com/watch?v=l8-ccufk4Q0

Categories

Resources