Related
Hi all.
Des anyone have snapchat working on an rooted phone ?
On mine ( S6 edge plus ) it dosen't working.
If someone have à solution i'll take it.
Thx for helping
Snapchat should work just fine on a rooted phone. I see no reason why root would block Snapchat from working? Maybe there's an other cause for your Snapchat not to work?
vikman53 said:
Hi all.
Des anyone have snapchat working on an rooted phone ?
On mine ( S6 edge plus ) it dosen't working.
If someone have à solution i'll take it.
Thx for helping
Click to expand...
Click to collapse
Ihave this problème since 3 month
I disconnect from and unable to connect. I then tried it on one of my son and since he too can reconnect. his phone is of a different brand and rooter too. I do not advise you to try if you are root
But if you try, please feedback
Thx
Its not root actually, its xposed. You cant sign in to snapchat with xposed installed on your phone it says theres a temporary problem signing in or something like that... I have custom rooted rom installed and there was an option to choose xposed in aroma installer. If I re run installer and chose no xposed, then I can sign in to snapchat. Also if you dont sign out often, you can uninstal xposed, sign on and reinstal xposed back, as long as you dont sign out it will work normally and theres no problems, but if you sign out you'll need to uninstal xposed again in order to sign in... I've been running it this way for quite some time.
ok thx
i w'ill try ....
i use audax rom , and in this rom i can't uninstall xposed , only desactived it . but after restart phone it's the same thing , can't connect.
vikman53 said:
ok thx
i w'ill try ....
i use audax rom , and in this rom i can't uninstall xposed , only desactived it . but after restart phone it's the same thing , can't connect.
Click to expand...
Click to collapse
Yes I know, disabling the xposed doens't work, I've also tried that before uninstalling it. Snapchat probably checks if there are any traces of xposed on the phone, so you need to remove it completely in order to sign in. It's also completely expected move as there are plenty of xposed modules that can modify snapchat so the core idea of the app dies as you can save photos without notification etc.
Would it be possible to configure rootcloak to ride xposed?
uristic said:
Yes I know, disabling the xposed doens't work, I've also tried that before uninstalling it. Snapchat probably checks if there are any traces of xposed on the phone, so you need to remove it completely in order to sign in. It's also completely expected move as there are plenty of xposed modules that can modify snapchat so the core idea of the app dies as you can save photos without notification etc.
Click to expand...
Click to collapse
yes but , how remove it completely , is integrated at the rom ...
StealthNet said:
Would it be possible to configure rootcloak to ride xposed?
Click to expand...
Click to collapse
Tried that, it doesn't work as root is not the problem, xposed is. I am rooted, and it works.
---------- Post added at 05:39 PM ---------- Previous post was at 05:34 PM ----------
vikman53 said:
yes but , how remove it completely , is integrated at the rom ...
Click to expand...
Click to collapse
I know, luckily I can just dirty flash the same ROM and choose not to instal xposed in aroma. I'm running KOS ROM V2 Debloated. As it goes for you I believe you'll have to flash a different ROM or just live without snapchat, unless there's a better option now, but I tried snapperfs and some other xposed modules that were supposed to hide root from snapchat, but I guess they updated what snapchat detects from root access, to xposed.
if i understand , if i want to use snapchat , i can't use xposed .
but i use différents module like torch exposed , wanam etc ....and i would like to continue to use them
another thing , we can find différents module for snapchat on xposed , if we find them we can use snap no ? i'm
but thx for your help ....
vikman53 said:
if i understand , if i want to use snapchat , i can't use xposed .
but i use différents module like torch exposed , wanam etc ....and i would like to continue to use them
another thing , we can find différents module for snapchat on xposed , if we find them we can use snap no ? i'm
but thx for your help ....
Click to expand...
Click to collapse
no, you can use xposed, but you need to install it AFTER you sign in to snapchat as it only prevents you to sign in if xposed is installed. What that means is that you must not sign out of snapchat once you install xposed as it won't work again. So if you do sign out somehow, you'd need to uninstall xposed (as I said I could do that with my ROM easily), sign in and again install xposed. This method works 100% as I am using snapchat AND xposed like that.
What I was saying about the modules that alowed to use it, is that snapchat, in the past supposedly only checked if the phone was rooted, as there are tutorials on the internet on how to hide root for signing in to snapchat, which now don't work anymore, as they obviously changed it to just check if xposed is installed because root itself wasn't really dangerous for them and a lot of people have their phones rooted and were complaining.
Right now, as far as I know, there's no other way than uninstalling xposed.
uristic said:
no, you can use xposed, but you need to install it AFTER you sign in to snapchat as it only prevents you to sign in if xposed is installed. What that means is that you must not sign out of snapchat once you install xposed as it won't work again. So if you do sign out somehow, you'd need to uninstall xposed (as I said I could do that with my ROM easily), sign in and again install xposed. This method works 100% as I am using snapchat AND xposed like that.
What I was saying about the modules that alowed to use it, is that snapchat, in the past supposedly only checked if the phone was rooted, as there are tutorials on the internet on how to hide root for signing in to snapchat, which now don't work anymore, as they obviously changed it to just check if xposed is installed because root itself wasn't really dangerous for them and a lot of people have their phones rooted and were complaining.
Right now, as far as I know, there's no other way than uninstalling xposed.
Click to expand...
Click to collapse
thx , it work , but i hope a solution will be found to avoid Xposed uninstalled each time ... again thank you
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
It's working for me with android pay.
Safetynet is passing for me using Magisk v9 & phh's Superuser r266-2, but a new version of each was released last week that chatter in other forums seem to suggest device-specific trouble with. I might try but first wanted to know if anyone else in the LePro3 world already has and had problems. My current interest in safetynet is for Android Pay and DirectvNow.
suhridkhan said:
It's working for me with android pay.
Click to expand...
Click to collapse
Thanks!
robertzas said:
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
Click to expand...
Click to collapse
Linked method is outdated ever since the introduction of November security patch.
Magisk V10 and phh SU r266 working fine for me on 20s
Upgrading worked for me too and I like how safety net check is part of the new status screen.
Seems like known issue but installing Xposed caused safetynet to fail, both before and after upgrade. Uninstalling Xposed caused safety net to pass again.
Root working and safetynet still passing on my x727 after taking the Magisk Manager upgrade to Magisk 11.1 and MagiskSu.
are all of you on a stock ROM and bootloader locked, I am using lineage OS 13, but safety net fails? do you have any idea how to fix this, just wanted to use ANDROID PAY, or do I need to be on STOCK ROM, just don't like the EUI and the status bar icons and the way they look(it's just me). Any help would greatly be appreciated=)
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay. I don't see how safetynet could be expected to fully pass on a non-OEM supported ROM, especially over the longhaul of the cat-and-mouse game.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen, the settings application, and the recents screen which I tolerate so as to have safetynet.
I could not pass safety net, got CM13, with MAGISK installed. Dang=)
squandry said:
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay but I don't see how safetynet could ever pass on a custom ROM.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen and the recents screen which I tolerate so as to have safetynet.
Click to expand...
Click to collapse
Hi, Did this but after installing MAGISK, everything passed, except FINGERPRINT got disabled, says hardware not supported. Android Pay works,just went to gas station and tried it, works flawlessly. FINGERPRINT is the problem I'm seeing now. Thanks for any help.
Sent from my LEX727 using XDA-Developers Legacy app
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
squandry said:
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
Click to expand...
Click to collapse
Yup, what boot image did you install? I think the problem was the boot image I used, are you on the 20's now? thanks
I am running the aboot from dr4stic's 19s unlocked bootloader zip, everything else is from the stock 20s OTA zip.
Ok, I have spent several hours trying to make it work and now time to ask for help. I got Leeco LePro 3 with custom Ron based on EUI, and trying to get Magisk working. First I tried installing system less SuperSU and Magisk, but it failed safety check multiple times, so I tried uninstalling SuperSU and use Magisksu, but not I am not able to move forward. I installed Magisk manager and when it try to install Magisk manager it downloads but doesn't show way to install it, I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
bocondo said:
I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
Click to expand...
Click to collapse
Flashing Magisk with TWRP should work. What do you mean by it fails to update?
Hey guys,
I am looking for a way to hide root, because I want to use the app "SEQR". I flashed the Superman Rom Nougat. I tried to hide magdisk with the build in tool, this didnt work. I also tried to uninstall root with their provided uninstall zip, but this also failed. The app says, my device is rooted. So have anyone a idea to have a possibility to have a rom with temporality root, it's no problem to uninstall root every time when I need it.
Thank you
Noone any ideas?
I saw someone mention the superman rom
I think the best way to hide it is using lastest Magisk with MagiskHide enabled in Magisk settings
I'll bump the thread if that's ok.
Also want to use SEQR with root if possible.
Tried the hide magisk in the meny and that did not work. Is there anything else to do?
thexps said:
I'll bump the thread if that's ok.
Also want to use SEQR with root if possible.
Tried the hide magisk in the meny and that did not work. Is there anything else to do?
Click to expand...
Click to collapse
try clearing cache & dalvik after flashing magisk. then make sure magiskhide is enabled and your app is selected.
running fine here.
For me it works partly App starts added in the MagiskHide list but the App dont want to activate the Tap&Pay Feature already 2 hours left and still not activated. Already cleared Cache&Dalvik nope
Maybe someone knows a workaround
xposed rootcloack module does not work either
found this thread and got excited I could get an answer
I just flashed b35 and now I get a CTS profile mismatch.
Could someone who isn't getting that error run "getprop ro.build.fingerprint" and post the results so I can fix mine?
I stopped passing when I upgraded to magisk 16. I downgraded magisk to pass again.
It was a recent update that messed it up for me. I chose uninstall from within the app and have been fighting for 2 days just to get my phone back to functional. Finally got it to flash the EDL and I'm doing OTA updates before I put TWRP back on. Once I have a safe backup from there, I'll give 15.4 a try. Were you getting both options red or just CTS profile mismatch? If I can get a fingerprint before installing 16, we can get around that.
Test_subj said:
It was a recent update that messed it up for me. I chose uninstall from within the app and have been fighting for 2 days just to get my phone back to functional. Finally got it to flash the EDL and I'm doing OTA updates before I put TWRP back on. Once I have a safe backup from there, I'll give 15.4 a try. Were you getting both options red or just CTS profile mismatch? If I can get a fingerprint before installing 16, we can get around that.
Click to expand...
Click to collapse
You'll need 15.3 to pass Safety Net. Versions 15.4 and up require logd or Magisk Hide won't enable. The stock ROM doesn't have logd, which is why these versions of Magisk fail Safety Net checks.
Clear and concise answer that's going to save me a lot of time flashing. thanks a ton!
For whatever reason, I couldn't get any version of magisk to show as installed anymore regardless of b19/25/32/35. gave up and tried lineage. all green now and less of the stock crap to deal with.
Has anyone gotten latest version of PoGo working on latest Oreo with ElementalX? I've never played but my friends keep asking me to join so I figured what the heck..
Slight problem... Device Not Compatible??
I had magisk and xposed, but I tried disabling, and even fully uninstalling xposed (and all additional xposed modules), and adding PoGo to the MagiskHide options, with no luck.
It still says that my device is not compatible...I would assume that's due to the rooting?
Or is it because I'm using ElementalX kernel?
I read somewhere that there's a (not pokemon go-specific) bypass sort of thing involving SatefyNet, but you have to install Magisk *before* going through initial phone setup, but any guide I've ever read about flashing/rooting ph-1 says to go through setup and then install magisk. I tried to find the post that talks about it but I can't find it right now. Anyway, I would imagine there's some kind of checksum against system and if magisk has been added after the fact, the checksum wont match? I really have no idea, just a guess.
I haven't seen any other posts specifically mentioning Essential being incompatible, so maybe it's just me.
I was originally thinking it was because of root or magisk remnants(?), but maybe it's the non-stock kernel.
If anyone could help, I'd really appreciate it.
I feel silly asking such a noob question, I've just never play PoGo...or any Pokemon...ever.
extra info:
I have successfully created an account using their google auth option.
I get through the first Professor Willow part, then character selection.
Usually part way through character selection, I get the error in the attached image.
Its not on any one specific section, however, it can/has occur at any point during the loading.
I've cleared cache and data a hundred times because it seems to get further each time if I do a fresh data wipe and start over -- I know the next step already so I can get through faster maybe lol
--update--
I finally got through character selection and made it to the first chance to catch pokemon. I hit a squirtle and it was trying to break free, and then that error popped up.
Haven't been able to get back in far enough again to see if it actually added to my PokeDex or not.
Sorry for the late reply, but you have to hide root detection under magisk.
For Pokemon go to work, go to Magisk > MagiskHide > then search for Pokemon go and select it then reboot.