Related
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
It's working for me with android pay.
Safetynet is passing for me using Magisk v9 & phh's Superuser r266-2, but a new version of each was released last week that chatter in other forums seem to suggest device-specific trouble with. I might try but first wanted to know if anyone else in the LePro3 world already has and had problems. My current interest in safetynet is for Android Pay and DirectvNow.
suhridkhan said:
It's working for me with android pay.
Click to expand...
Click to collapse
Thanks!
robertzas said:
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
Click to expand...
Click to collapse
Linked method is outdated ever since the introduction of November security patch.
Magisk V10 and phh SU r266 working fine for me on 20s
Upgrading worked for me too and I like how safety net check is part of the new status screen.
Seems like known issue but installing Xposed caused safetynet to fail, both before and after upgrade. Uninstalling Xposed caused safety net to pass again.
Root working and safetynet still passing on my x727 after taking the Magisk Manager upgrade to Magisk 11.1 and MagiskSu.
are all of you on a stock ROM and bootloader locked, I am using lineage OS 13, but safety net fails? do you have any idea how to fix this, just wanted to use ANDROID PAY, or do I need to be on STOCK ROM, just don't like the EUI and the status bar icons and the way they look(it's just me). Any help would greatly be appreciated=)
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay. I don't see how safetynet could be expected to fully pass on a non-OEM supported ROM, especially over the longhaul of the cat-and-mouse game.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen, the settings application, and the recents screen which I tolerate so as to have safetynet.
I could not pass safety net, got CM13, with MAGISK installed. Dang=)
squandry said:
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay but I don't see how safetynet could ever pass on a custom ROM.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen and the recents screen which I tolerate so as to have safetynet.
Click to expand...
Click to collapse
Hi, Did this but after installing MAGISK, everything passed, except FINGERPRINT got disabled, says hardware not supported. Android Pay works,just went to gas station and tried it, works flawlessly. FINGERPRINT is the problem I'm seeing now. Thanks for any help.
Sent from my LEX727 using XDA-Developers Legacy app
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
squandry said:
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
Click to expand...
Click to collapse
Yup, what boot image did you install? I think the problem was the boot image I used, are you on the 20's now? thanks
I am running the aboot from dr4stic's 19s unlocked bootloader zip, everything else is from the stock 20s OTA zip.
Ok, I have spent several hours trying to make it work and now time to ask for help. I got Leeco LePro 3 with custom Ron based on EUI, and trying to get Magisk working. First I tried installing system less SuperSU and Magisk, but it failed safety check multiple times, so I tried uninstalling SuperSU and use Magisksu, but not I am not able to move forward. I installed Magisk manager and when it try to install Magisk manager it downloads but doesn't show way to install it, I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
bocondo said:
I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
Click to expand...
Click to collapse
Flashing Magisk with TWRP should work. What do you mean by it fails to update?
Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT
sriszone said:
Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT
Click to expand...
Click to collapse
Root same way as you rooted marshmallow. Flash twrp, flash supersu 2.79. everything is the same. it will take a while to boot though be patient.
Flash TWRP in Odin
Flash SR3-SuperSU-v2.79-SR3-20170114223742.zip in TWRP
no its not working......After install recovery stuck in Samsung Flashing logo....
TWRP is making the devices get stuck on Samsung logo....
I think what is happening is that when you install only the twrp the encryption of the device conflicts and leaves in bootoolp. When you install twrp and root , root already comes with a tool that takes out the encryption. But if you just want twrp, as was my case, you should, first of all, on your own twrp, wipe data and then flash no-verity-opt-encrypt.
Having root and no encryption sucks. Think I'll wait
Found Some Official Announcement From @Chainfire
Source :- Link
ChainFire Info
I'm not entirely sure what is going on here yet. I've had the stock firmware randomly stop booting even without modifying the boot image (rooting). Others have also reported that just flashing TWRP may trigger a bootloop (which is weird). I have some ideas what the cause may be, but it will be some time before I can properly investigate them.
The only way I seem to reliably get both TWRP and SuperSU working right now is:
- Flash TWRP (3.0.2-5) to recovery
- Immediately boot into TWRP
- If you were encrypted, format /data (ext4) and reboot into TWRP again
- Flash SuperSU v2.79-SR3 in TWRP
- Reboot into Android
The first boot will take a while if you performed that format, but for me it ultimately completes. Note that your device will be running unencrypted at this point!
Of course, if you format /data, you will lose all your data (including contents of internal storage!). Before I flashed the new version, I used FlashFire v0.54-PRE to create a backup of /data and internal storage to the removable sdcard, and restore that backup after flashing DPLT, rooting, and reinstalling FlashFire. This worked fine for me, and all my settings - including fingerprints and system settings - transferred fine. I came from the first Nougat beta, but I've seen others reporting success doing the same thing coming from Marshmallow. As always, your mileage may vary.
Unfortunately, due to this boot-loop issue with DPLT and encrypted data, it is also impossible to use FlashFire to upgrade the firmware itself to DPLT while keeping root if you started with an encrypted device.
I am not sure if the same difficulties exist with other official builds than DPLT, nor if the same problems occur with any of the custom ROMs based on DPLT. The S7 is my daily driver so I don't like to experiment with it too much
Below attach the required Files, I gonna try tomorrow. If anyone tried now please report update.
DOWNLOAD HERE
I did root few minutes ago on my 7.0 but now im not unable to launch s health because knox is disabled.
sriszone said:
Found Some Official Announcement From @Chainfire
Source :- Link
ChainFire Info
I'm not entirely sure what is going on here yet. I've had the stock firmware randomly stop booting even without modifying the boot image (rooting). Others have also reported that just flashing TWRP may trigger a bootloop (which is weird). I have some ideas what the cause may be, but it will be some time before I can properly investigate them.
The only way I seem to reliably get both TWRP and SuperSU working right now is:
- Flash TWRP (3.0.2-5) to recovery
- Immediately boot into TWRP
- If you were encrypted, format /data (ext4) and reboot into TWRP again
- Flash SuperSU v2.79-SR3 in TWRP
- Reboot into Android
The first boot will take a while if you performed that format, but for me it ultimately completes. Note that your device will be running unencrypted at this point!
Of course, if you format /data, you will lose all your data (including contents of internal storage!). Before I flashed the new version, I used FlashFire v0.54-PRE to create a backup of /data and internal storage to the removable sdcard, and restore that backup after flashing DPLT, rooting, and reinstalling FlashFire. This worked fine for me, and all my settings - including fingerprints and system settings - transferred fine. I came from the first Nougat beta, but I've seen others reporting success doing the same thing coming from Marshmallow. As always, your mileage may vary.
Unfortunately, due to this boot-loop issue with DPLT and encrypted data, it is also impossible to use FlashFire to upgrade the firmware itself to DPLT while keeping root if you started with an encrypted device.
I am not sure if the same difficulties exist with other official builds than DPLT, nor if the same problems occur with any of the custom ROMs based on DPLT. The S7 is my daily driver so I don't like to experiment with it too much
Below attach the required Files, I gonna try tomorrow. If anyone tried now please report update.
DOWNLOAD HERE
Click to expand...
Click to collapse
You can root but you have to disable encryption. Not a fan of that personally so I'll wait for another solution. If I lose my phone at least I'll have secure power up enabled. There is no bypassing that. There are too many FRP exploits on Youtube so having no encryption and simply a password isn't enough in my opinion.
---------- Post added at 10:29 PM ---------- Previous post was at 10:29 PM ----------
Mystero said:
I did root few minutes ago on my 7.0 but now im not unable to launch s health because knox is disabled.
Click to expand...
Click to collapse
Since you are rooted, uninstall S Health and install a lower version number which doesn't require Knox.
Galactus said:
Since you are rooted, uninstall S Health and install a lower version number which doesn't require Knox.
Click to expand...
Click to collapse
Hi, i cannot manage to unistall S Health, tried already two apps, after reboot app is still there and if i try to install older version i get corrupted file error.
guys please explain what is encryption and unencription here.... how can i disable ? can we flash this no-verity-opt-encrypt-5.0.zip
sriszone said:
Hello
Any one know how to root latest nougat release?????
G935FXXU1DPLT
Click to expand...
Click to collapse
I got fully working root and TWRP on Nougat G935FXXU1DPLT.
I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues
cross_312 said:
I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues
Click to expand...
Click to collapse
Security log will stop after you launch SU application and let SU to disable knox, it takes me always two attempts, disable, keep trying then i restart smartphone and after restart i try to disable knox again and it works, no more pop ups.
About S Health I'm looking for solution, so far should be enough to install older version set it up and update for new one, problem is that i cannot uninstall old version to get new one working.
cross_312 said:
I have installed nougat btu with Odin.
Installed twrp and rooted my device.
So far I have faced couple of issues
s health app is not working
Security log agent keeps popping up (drives me mad)
And my device freezes and reboots after i open lucky patcher
How to fix these issues
Click to expand...
Click to collapse
S Health is now locked down if you have tripped knox. The only solution is to use an older version.
Mystero said:
Security log will stop after you launch SU application and let SU to disable knox, it takes me always two attempts, disable, keep trying then i restart smartphone and after restart i try to disable knox again and it works, no more pop ups.
About S Health I'm looking for solution, so far should be enough to install older version set it up and update for new one, problem is that i cannot uninstall old version to get new one working.
Click to expand...
Click to collapse
SuperSU couldn't disable Knox for me after many tries. In the end I just used Titanium to freeze Knox.
CuBz90 said:
S Health is now locked down if you have tripped knox. The only solution is to use an older version.
SuperSU couldn't disable Knox for me after many tries. In the end I just used Titanium to freeze Knox.
Click to expand...
Click to collapse
What did work for me was try to disable when SU was trying i did restart device and right after restart i did tried that again and it worked. Maybe lucky...
About S Healht how can i use older version if i cannot install one because new one exist, do you know how to remove s health? i Tried two apps for removing system apps without success.
Mystero said:
What did work for me was try to disable when SU was trying i did restart device and right after restart i did tried that again and it worked. Maybe lucky...
About S Healht how can i use older version if i cannot install one because new one exist, do you know how to remove s health? i Tried two apps for removing system apps without success.
Click to expand...
Click to collapse
Try titanium. Backup the app first and then uninstall.
CuBz90 said:
Try titanium. Backup the app first and then uninstall.
Click to expand...
Click to collapse
Sir thank you, i do not know how it is possible that another apps did not worked but titanium did removed new S Health. Afterwards i did install last version of S Health i found before version 5, After launching S Health and connecting account i did update on new S health and everything works.
You really saved me. Thank you
Mystero said:
Sir thank you, i do not know how it is possible that another apps did not worked but titanium did removed new S Health. Afterwards i did install last version of S Health i found before version 5, After launching S Health and connecting account i did update on new S health and everything works.
You really saved me. Thank you
Click to expand...
Click to collapse
i have tried to remove the s health app with titanium but everytime i try to install vesrion 4.8 phone says that i can not install this app beacuse there is a package with the same name
what verison did you install before s health 5 and how did you install it.
and can anyone tell me how do i make lucky patcher to work properly
Has anyone gotten latest version of PoGo working on latest Oreo with ElementalX? I've never played but my friends keep asking me to join so I figured what the heck..
Slight problem... Device Not Compatible??
I had magisk and xposed, but I tried disabling, and even fully uninstalling xposed (and all additional xposed modules), and adding PoGo to the MagiskHide options, with no luck.
It still says that my device is not compatible...I would assume that's due to the rooting?
Or is it because I'm using ElementalX kernel?
I read somewhere that there's a (not pokemon go-specific) bypass sort of thing involving SatefyNet, but you have to install Magisk *before* going through initial phone setup, but any guide I've ever read about flashing/rooting ph-1 says to go through setup and then install magisk. I tried to find the post that talks about it but I can't find it right now. Anyway, I would imagine there's some kind of checksum against system and if magisk has been added after the fact, the checksum wont match? I really have no idea, just a guess.
I haven't seen any other posts specifically mentioning Essential being incompatible, so maybe it's just me.
I was originally thinking it was because of root or magisk remnants(?), but maybe it's the non-stock kernel.
If anyone could help, I'd really appreciate it.
I feel silly asking such a noob question, I've just never play PoGo...or any Pokemon...ever.
extra info:
I have successfully created an account using their google auth option.
I get through the first Professor Willow part, then character selection.
Usually part way through character selection, I get the error in the attached image.
Its not on any one specific section, however, it can/has occur at any point during the loading.
I've cleared cache and data a hundred times because it seems to get further each time if I do a fresh data wipe and start over -- I know the next step already so I can get through faster maybe lol
--update--
I finally got through character selection and made it to the first chance to catch pokemon. I hit a squirtle and it was trying to break free, and then that error popped up.
Haven't been able to get back in far enough again to see if it actually added to my PokeDex or not.
Sorry for the late reply, but you have to hide root detection under magisk.
For Pokemon go to work, go to Magisk > MagiskHide > then search for Pokemon go and select it then reboot.
Cannot open SIM & Network settings / com.android.phone crashes after uptdate to OO10
Device:
Rooted OP 6t, OxygenOS 10.3, stock recovery, Magisk 20.2, Magisk Manager 7.5.0
What did I do:
I updated from the last OxygenOS 9 Version to OxygenOS 10.3 by uninstalling magisk, restoring images and doing the manual update through the downloaded full image. Reinstall magisk. It all went well. First boot took a while but went through.
SIM was not recognised at all.
I've reset all network settings and cleared cache and data of com.android.phone.PhoneApp.
Found out here that its due to a call record magisk module which I uninstalled. Mobile data is working just fine since then.
I tried to uninstall magisk and reinstall it before rebooting in order to keep the possibility to keep root as I do not have twrp installed. (suggested here). I guess this is unrelated.
Issue:
I cannot access the SIM & Network Settings. When I try, the app com.android.phone crashes instantly.
Logs throw these warnings:
Code:
Unable to launch app com.android.phone/99901001 for broadcast Intent { act=android.telephony.action.CARRIER_CONFIG_CHANGED flg=0x15000010 (has extras) }: process is bad
Is there a way to check the carrier config or renew it?
Code:
Unable to launch app com.android.phone/99901001 for broadcast Intent { act=android.intent.action.SIM_STATE_CHANGED flg=0x5000010 (has extras) }: process is bad
Hows the SIM state changing?
and this Error:
Code:
Sending non-protected broadcast com.android.internal.telephony.ACTION_IMS_CAPABILITY_STATUS_CHANGE from system 1102:system/1000 pkg android
java.lang.Throwable
at com.android.server.am.ActivityManagerService.checkBroadcastFromSystem(ActivityManagerService.java:15963)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:16666)
at com.android.server.am.ActivityManagerService.broadcastIntentLocked(ActivityManagerService.java:15980)
at com.android.server.am.ActivityManagerService.broadcastIntent(ActivityManagerService.java:16808)
at android.app.ContextImpl.sendStickyBroadcastAsUser(ContextImpl.java:1422)
at com.android.server.TelephonyRegistry.broadcastImsCapabilityStatusChangeForPhoneId(TelephonyRegistry.java:2644)
at com.android.server.TelephonyRegistry.notifyImsCapabilityStatusChangeForPhoneId(TelephonyRegistry.java:2636)
at com.android.internal.telephony.ITelephonyRegistry$Stub.onTransact(ITelephonyRegistry.java:964)
at android.os.Binder.execTransactInternal(Binder.java:1032)
at android.os.Binder.execTransact(Binder.java:1005)
I am not sure what to do. But I do want to avoid a full factory reset.
Thanks for your hints.
Alternatively is it possible to access the settings of this submenu through a different app or way?
hey_malik said:
Alternatively is it possible to access the settings of this submenu through a different app or way?
Click to expand...
Click to collapse
Sounds like a bad flash, or you didn't factory reset. If you update from 9 to 10 without wiping data, **** can happen
True, I did not because I don't want to set up the whole phone afterwards.
Could it be a solution to flash the ROM again through the integrated update system? Or would I then need to install twrp? I haven't done this in ages
Have you got any magisk module active?
estapagu said:
Have you got any magisk module active?
Click to expand...
Click to collapse
I uninstalled magisk for the update. Reinstalled it, forgot the call recording module. Removed that.
I still have systemless hosts, viper and YouTube vanced active.
hey_malik said:
I uninstalled magisk for the update. Reinstalled it, forgot the call recording module. Removed that.
I still have systemless hosts, viper and YouTube vanced active.
Click to expand...
Click to collapse
I had some SIM problems at the beginning related to a magisk module but I can't remember which. And another problem with WiFi after OTA update using magisk OTA udapte method, so finaly I deleted Magisk completely and updated from TWRP
Just to get this straight:
I may in a first step boot a twrp image (just boot) dirty flash the latest stock image, flash magisk (or not and lose root for the moment which is no issue because I have an unlocked boot loader) and see if the issue is still present. If yes a clean wipe and install is in order?!
@hey_malik
dude when i upgraded from 9.0.17 to 10.3.0 occurred same issue...
Backup all your stuff and MSM your device.
Look for '[OP6T][LATEST 10.3.0] Collection of unbrick tools' thread,
posts #83 - #86 and see how i solved.
Good luck :fingers-crossed:
Cheers
Dadditz said:
@hey_malik
dude when i upgraded from 9.0.17 to 10.3.0 occurred same issue...
Backup all your stuff and MSM your device.
Look for '[OP6T][LATEST 10.3.0] Collection of unbrick tools' thread,
posts #83 - #86 and see how i solved.
Good luck :fingers-crossed:
Cheers
Click to expand...
Click to collapse
I don't really get what you mean. What's msm? Magisk? And what am I supposed to do? Remove magisk completely? I've read the posts 83-86 but it's a bit cryptic for me.
hey_malik said:
I don't really get what you mean. What's msm? Magisk? And what am I supposed to do? Remove magisk completely? I've read the posts 83-86 but it's a bit cryptic for me.
Click to expand...
Click to collapse
Sorry, sometimes I take certain things for granted.
By MSM I meant (incorrectly) the unbrick / downgrade package
posted on the first page of the thread I indicated to you.
If you have not solved that problem and want to try,
I recommend using the Android 10-based package.
Back up all your stuff, be sure you have installed the OP6T drivers on your PC.
All information is already described in the aforementioned thread
or in the link posted on the first page that reports to that of iaTa.
All the credits go to these fantastic guys.
Cheers
Dadditz said:
Sorry, sometimes I take certain things for granted.
By MSM I meant (incorrectly) the unbrick / downgrade package
posted on the first page of the thread I indicated to you.
If you have not solved that problem and want to try,
I recommend using the Android 10-based package.
Back up all your stuff, be sure you have installed the OP6T drivers on your PC.
All information is already described in the aforementioned thread
or in the link posted on the first page that reports to that of iaTa.
All the credits go to these fantastic guys.
Cheers
Click to expand...
Click to collapse
I suggest you boot to Twrp, then flash the Twrp. Get inside twrp and flash these > OOS, Twrp, Magisk Then reboot again to twrp repeat > OOS, Twrp, Magisk. And for the last time reboot again to twrp and flash the Magisk.
You will be good to go. :good:
Is there any risk involved concerning the encryption?
hey_malik said:
Is there any risk involved concerning the encryption?
Click to expand...
Click to collapse
As you already mentioned, you are in Android 10, and if you are using the correct Twrp. There won't be any.
Still it's always better to take a back up just in case if something goes wrong.
Stuck with the same issue. Did you manage to get it fixed somehow?
Actually the latest available oo update to 10.3.1 fixed it.
hey_malik said:
Actually the latest available oo update to 10.3.1 fixed it.
Click to expand...
Click to collapse
Lucky you. I got this issue when switching to 10.3.1 from 9. I tried flashing 10.3.1 once again. Didn't work.
You need to uninstall Magisk then factory reset, it will get rid of all Magisk modules ghost residues. Then flash Magisk again with fastboot twrp method. I had this and going back to factory state was the only fix. No need to flash again and again the rom it doesn't touch Magisk data in /data partition.
hey_malik said:
Actually the latest available oo update to 10.3.1 fixed it.
Click to expand...
Click to collapse
Just an update, this worked for me too. Thanks for posting that tip else I would have went ahead and reset the phone. You saved me a hell lot of trouble.
Additionally, I figured out a solution which might work for people still having this issue. I haven't tested this myself since I found this after my issue was solved.
The reason why the issue happened to us is because the system app "Phone Services" was missing, or not installed properly while dirty flashing. There is an alternative hidden activity for sim settings called "com.android.settings.network.telephony.MobileNetworkActivity", which is not a part of Phone Services app, but a part of the Settings app itself. This could be invoked using any activity launcher apps available in the Play Store.
Also, this activity gives more advanced sim settings too. So, probably worth a look if interested.
Same problem here, but fixed!!
Sim not working anymore after update to Magisk 21.2. nothing would change it.
After installing previous version (21.1) the problem persisted. After almost giving up, I found this thread. Simply uninstalled the OOS Native Call Enabbler module and everything workes like a charm again!!!
So it was an easy fix (once you know) and I am very thankful, because I would never have thougt of it! Unfortunately I cannot record Calls anymore, nor find the module now that I am successfully running on 21.2 again with working SIM. Though the choice between being able to use my SIM or record calls was easy
Hope someone finds use of this info.
As mentioned before Encryption is not a problem if the right TWRP version is used.
Put in you password (or pin) and all is nicely decrypted and reachable in TWRP Recovery.
Good luck to all!
PS: still hoping for a new (compatible) call recorder module though
I recently moved to OOS11 and had trouble rooting. Now that I have my phone rooted I can no longer restart it or it will bootloop. Does anyone have any idea why that would be?
This will be the 3rd time I have MSMed my phone in the last 3 days.
As many problems as I'm having I'm thinking of just going back to Android 10.
Thanks in advance.
night hawk said:
I recently moved to OOS11 and had trouble rooting. Now that I have my phone rooted I can no longer restart it or it will bootloop. Does anyone have any idea why that would be?
This will be the 3rd time I have MSMed my phone in the last 3 days.
As many problems as I'm having I'm thinking of just going back to Android 10.
Thanks in advance.
Click to expand...
Click to collapse
Can you provide a bit more background, do you have any Magisk modules installed, does your phone boot at all? Did you patch your own boot.img just so that we can help you out better
Shredz98 said:
Can you provide a bit more background, do you have any Magisk modules installed, does your phone boot at all? Did you patch your own boot.img just so that we can help you out better
Click to expand...
Click to collapse
I'm patching my own boot.img and I only have skyvalex call recorder installed as a module. When it happens I just get stuck in an infinite boot animation with the two dots circling continuously.
I think I may have narrowed down the problem by going through the steps that I normally go through after MSMing my phone (I've done it 4 times now lol) and rebooting after each step to see what triggers it. Here are the steps in order.
1. MSM the phone and do bare minimum to get to home screen so I can enable OEM ulocking and usb debugging. (rebooted just fine)
2. Unlock bootloader with adb. (rebooted just fine)
3. Install magisk manager, switch to beta update channel, patch boot.img, flash patched boot.img (rebooted just fine)
4. Setup up phone with google account, set up fingerprint, etc (rebooted just fine)
5. Enable magisk hide and systemless hosts (rebooted just fine)
6. Restore a backup using oneplus switch from before this all started happening. (rebooted just fine)
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. I'm wondering if the new "use magisk module" mode in the newest version is causing the problem. Maybe if I installed EdXposed and used that like I used to maybe it would remedy the problem. Or maybe I should just use an adblock magisk module. However its far passed my bedtime so I will confirm this tomorrow if possible.
Disable the modules you have installed.
Reboot, does it loop?
If no then it's a module
If it does then it's your boot img
I'd recommend booting your patched boot img then directly installing via magisk (do not reboot until you have)
Hope this helps
night hawk said:
I'm patching my own boot.img and I only have skyvalex call recorder installed as a module. When it happens I just get stuck in an infinite boot animation with the two dots circling continuously.
I think I may have narrowed down the problem by going through the steps that I normally go through after MSMing my phone (I've done it 4 times now lol) and rebooting after each step to see what triggers it. Here are the steps in order.
1. MSM the phone and do bare minimum to get to home screen so I can enable OEM ulocking and usb debugging. (rebooted just fine)
2. Unlock bootloader with adb. (rebooted just fine)
3. Install magisk manager, switch to beta update channel, patch boot.img, flash patched boot.img (rebooted just fine)
4. Setup up phone with google account, set up fingerprint, etc (rebooted just fine)
5. Enable magisk hide and systemless hosts (rebooted just fine)
6. Restore a backup using oneplus switch from before this all started happening. (rebooted just fine)
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. I'm wondering if the new "use magisk module" mode in the newest version is causing the problem. Maybe if I installed EdXposed and used that like I used to maybe it would remedy the problem. Or maybe I should just use an adblock magisk module. However its far passed my bedtime so I will confirm this tomorrow if possible.
Click to expand...
Click to collapse
The issue is definitely lucky patcher, I had the same problem and my phone was useless until I got rid of it. So it seems it's not playing well with A11 or OOS11 in any case do not use it or you'll end up in a boot loop.
Cheers!
Ah lucky patcher..oh dear, can't help you with that crap.
Best advice, get rid
Bummer about Lucky Patcher....
In b4 the lock.
I can confirm the same findings, lucky patcher seems to break reboots later.
Hopefully a new version will find and resolve the issue, but until then not much we can do but to wait.
Unfortunately doesn't appear to be any way to get around this or recover from the bootloops without a wipe/reimage. Can't get access for adb during bootanimation, cant boot from a boot img, just basically stuck.
@OP, perhaps you can put a message in your thread's title just warning against LP on A11 for the time being.
uaktags said:
Unfortunately doesn't appear to be any way to get around this or recover from the bootloops without a wipe/reimage. Can't get access for adb during bootanimation, cant boot from a boot img, just basically stuck.
@OP, perhaps you can put a message in your thread's title just warning against LP on A11 for the time being.
Click to expand...
Click to collapse
I changed the title. Do we know if LP can be used with xposed on Android 11 with success still?
night hawk said:
I changed the title. Do we know if LP can be used with xposed on Android 11 with success still?
Click to expand...
Click to collapse
Did xposed work on 11?
night hawk said:
...
7. Use luckypatcher to remove ads from a few games (BOOTLOOP)
Well it would appear that luckypatcher is the problem. ...
Click to expand...
Click to collapse
@night hawk
Hi!
You better read the XDA Forum Rules and refrain from such topics. We don't accept discussions about issues with warez!
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
Click to expand...
Click to collapse
THREAD CLOSED!