Related
Hi all
It would be great if you shed some light on the problem
Xda exec had a fall!..since then no sounds at all, phone won't ring or won't play music...but has sound if i plugged the headphones in
Any theories/ideas what might have gone wrong...& possible solutions..
any help would be appreciated...thanxs
sound failed on xda exec
i also had the same issue but my handset was replaced as it was within 28 days of getting the handset
i never did manage to find the exact issue
when your handset fell did it have external sound / handsfree plugged in at the time
about the only thing that made any sense with mine was the possibilty of the micro switch / contacts of the externl audio jack being damaged
dont know if any of this info helps you at all but best of luck getting it sorted
Still no explanation for the no sound problem Xda Exec
Does anybody find out allready what's the problem with no sound on the Xda Exec.
I not speak about the problem with the external audio jack.
I can make cals like normal, I only can not play music or listen if somenone is calling me.
Thanks
its hardware problem with universals audiojack .. just open device ..remove board . plug headphones ... and see on connector /.... in most cases no sound issue cames from third pin of jack (thst pin detect plugged headpnones .. if it disconnected device plays in headphones if connected device plays on builtin speakers) if near end of it ...
a may advice you more deeply but i didnot have proper photo to explan in his basis..
just give me HI RES PHOTO OF BOTH SIDES OF YOUR MOTHERBOARD.. i explain what to do
mo3ulla said:
its hardware problem with universals audiojack .. just open device ..remove board . plug headphones ... and see on connector /.... in most cases no sound issue cames from third pin of jack (thst pin detect plugged headpnones .. if it disconnected device plays in headphones if connected device plays on builtin speakers) if near end of it ...
a may advice you more deeply but i didnot have proper photo to explan in his basis..
just give me HI RES PHOTO OF BOTH SIDES OF YOUR MOTHERBOARD.. i explain what to do
Click to expand...
Click to collapse
Thanks for your post.
You are shure that this willbe the problem, because I can make calls without the headphone. I was thinking that in the case that the connector gives the problem, I should also not be able to make any calls without using the headphone.
Anyway I was going to open my friend one day, to look what's up.
problem may be repaired in home in 10mins
you need
hands
brain
tools to open
1 needle
do photo .. i say what next
mo3ulla said:
problem may be repaired in home in 10mins
you need
hands
brain
tools to open
1 needle
do photo .. i say what next
Click to expand...
Click to collapse
Ok, here we go.
We have hands, tools ( a hammer ) and 1 needle.
I think I forgot something, but...
I think the problem, when the problem is hardware,
is that when you put the headphone jack, the top of the jack he opens the microswitch what you see at first.
Ofcourse when this switch he stays also open when you take out the jack, than you have a problem.
And yes with a needle you can first open the contakt and than you can dress littlebit the position of the contakt.
I have only 1 problem on my tel, this switch is closed as well, when I take out the jack. The problem is not this switch.
here we go
Correct, I am shure that this is almost always the problem.
In fact the switch is closed in normal position, and he goes open when you put the headphones.
When he not close as well automatic than, you have a problem.
But in my case it is really not this switch, so I am still looking for the reason why I not have sound.
hi all
i have same probelem like you
my friend using my device for weeks and when she give it back to me i have no sound from my device & even from headset i call the i-mate center the girl told me maybe your jack is dameged but when i sent it to suport center they told me your flex cable is dameged by wrong rotating your device and we haven't that yet ....
they sent it back to me and after some day my screen shows nothing then i buoght a cable from ebay an change , now i have voice sound screen
&....
like before
i hope these usefull for you
This was exactly my issue, under that pinkbox you marked is the tiny tab that makes or breaks contact with the internal speaker. Because my headphones break the contact, this tab after much use was stuck in the open position even after the headphones were removed. When I did the procedure you mentioned magically, sound..wow. I am extremely greatful for your troubleshooting skill.
Thanks a million mo3ulla.
If only i had this fix 2 phones ago..hahhahah.
lambrechts said:
Correct, I am shure that this is almost always the problem.
In fact the switch is closed in normal position, and he goes open when you put the headphones.
When he not close as well automatic than, you have a problem.
But in my case it is really not this switch, so I am still looking for the reason why I not have sound.
Click to expand...
Click to collapse
Hi lambrechts,
Did you manage to find out the reason?
i have the same problem, my device fell, but i didn't notice the problem until next day (i didn't use it) so i'm not sure if it is because of the drop.
I will open my device and check the Jack pins, but i want to know if you got any fix for this.
mo3ulla said:
here we go
Click to expand...
Click to collapse
hey mo3ulla, did your method work after repeated use of the headphone port? did it get stuck again any time after you fixed it?
just asking cause i have this problem on my 9000 and haven't opened it yet so i don't want to open and close it repeatedly
thankss
I have this problem aswell. But I inserted a fork and twisted it around a little and now it works as it should again.
Bumping this thread. Should be a sticky or in the wiki.
Anyways,
I tried the pin trick back when I posted here, it worked but it wasn't permanent. Instead I put a crumpled piece of post-it note above the pink dot in the picture and it worked, up until recently. Does anybody have a method to bend the connecter back down? I'm probably not using the needle right, I press the pink spot, but it pops back up.
Ideas?
twisting the pin really helps. thanks for the solution. I tried to insert my headphone again and the pin always stucked. I'm trying to find a permanent solution for this. Maybe put something to push the pin to be connected everytime I remove the headphone...
I hope this helps. I found it very useful to my Dopod 900. I tried to connect my headphones (sounds works on my headphone) then I disconnect it and sounds works on my stereo/speakers.
*Please do it carefully in pushing the pin upward from inside the hole. Just push it a little bit just enough to touch the upper pin..
additional tip: after you fixed your device, try to install SRS Wow for great audio experience
Quick Fix
I found that if you apply a little pressure between the base and just above the send key this seems to work, I tried this tonight and will report back if goes again.
luckyearl said:
Hi all
It would be great if you shed some light on the problem
Xda exec had a fall!..since then no sounds at all, phone won't ring or won't play music...but has sound if i plugged the headphones in
Any theories/ideas what might have gone wrong...& possible solutions..
any help would be appreciated...thanxs
Click to expand...
Click to collapse
could be a damaged PCB motherboard, or lose connetion for the sound chip!
you could try fixnig it, or replacing the motherboard.
a new motherboard could be bought off E-Bay US for a cheapish price =]
genspeed said:
I hope this helps. I found it very useful to my Dopod 900. I tried to connect my headphones (sounds works on my headphone) then I disconnect it and sounds works on my stereo/speakers.
*Please do it carefully in pushing the pin upward from inside the hole. Just push it a little bit just enough to touch the upper pin..
additional tip: after you fixed your device, try to install SRS Wow for great audio experience
Click to expand...
Click to collapse
Not sure if the srs wow will work, last time i tried it give lots of other problems like; mute the sounds, works great after you press the power button on and off, then no GPRS and Internet conectivity but if you have worked around those probs pls give an idea?
hi i have a spv m5000 (htc universal) with jcwrights 2.02.02 rom is was working today worning but in the afternoon the sound does not come, when i use headphones it works perfectly i havent dropped the phone or nothing could someone please help thanks
Plug in and plug out the earphones several times to re-route the sound to speakers.
PS: play some song on WMP so that ASA sound comes from the device to make yourself aware that the things are back to normal
hi it quite worked when i put the earphones all in theres no sound but to the earphones but wen its taken out no sound however when i put the earphones when its in the middle it plays perfect please help me anyone with instant messaging will please help i need it its not a loose wiring i know but please i will wven pay if you help me to get it up and running before wednesday thanks
It's your headphone jack
Theres a problem wit hyour headphone jack, i think the bit inside that works out if there are headphones in the device or noot has got stuck to thinking there are always headphones in the slot.
The solution to this is to put the headphones in and out til lyou get sound back, maybe do a soft reset. I dunno I started to get it on my last uni but i had that replaced due to scren failing.
i have no idea?, i put it in and out maybe 100 time it still doesnt work please help me please will pay donation to the soloution which works! please
hello, i have sent it for htc repairs hopefully some result has anybody ever sent it for repairs
hi samzurai,
I have exactly the same problem as you. did you manage to solve it somehow?
I had same problem solved it this way.
when sound does not start put stylus in the headfone jack turn it a bit and take it out
that should get your sound again
grifone said:
I had same problem solved it this way.
when sound does not start put stylus in the headfone jack turn it a bit and take it out
that should get your sound again
Click to expand...
Click to collapse
Same thing happened to me...listened to WMP through headphones...take the headphones out & NO SOUND!!! I could put the headphones back in and hear sound, but NO sound on the phone or sound from WMP w/o the headphones. I G-E-N-T-L-Y moved the 2.5 jack in and out of the audio jack and the sound almost instantly came back...repeat as necessary!
Hi everybody,
my wizard (with faria crossbow) is suddenly acting strange:
I plugged in my headset and listened to some music with media player, while i stopped listening received a call..
I've plugged out the headset but.... there's no sound coming out of the phone any more! Sound is only working through the headset... any help??
(I've tried adjusting the volume, resetting etc... without success!)
Could be mechanical damage to the headphones jack.
Try fixing it by putting a match there to unlock it.
sorry but what do you mean with: "by putting a match there to unlock it" ?
Try inserting and removing the headphone jack a few times, perhaps the contacts area bit bent and are shorting out.
well i've tried that.. doesn't work..
well suddenly after removing en inserting the jack a phew time the sound is working again... really strange but thx everbody
okeay this is really some mechinal flaw.. but its really annoying!!
While im calling and talking through the normal mic sometimes sound+mic stops working (and so the phone thinks theres a headset plugged in).
I know there is something inside the headphone jack that is not working correctly but I don't know what..
Is there a way to open the phone and fix this problem?
These things are great ! Dropped it on its head more than a few times and it still works !! Thanks to the xda-developer community for saving me having to get a new one !!
it was the headphones ;}
Hi ppl! Let's see if I can express my problem!
My wizard is having this problem:
The inside speaker doesn't work during a call, only loud speaker(hands free) works, or by handset or bluetooh speaker! Does any one have this kind of problem?
I've send this one to warranty but, i've got a stupid respond from HTC:
"....Dear Sr. You have used an illegal software that damage you HTC motherboad...". Uaaauuu I've never used any 3rd software on this one. after received this answer Yesterday I made the first update to this phone (install the XDA Mobile 6 Release 3) but the problem still there.
Does any one have some ideas?
Now a stupid question ? how many speakers does wizard have ? 2 ?
Thanks for your time.
Rui
A while ago i had a similar problem where the phone thought my wired headset was plugged in and would not send the sound to the speakers... Only the headset, so i put some music on and plugged the headset in and out pretty fast until the sound came out the speakers in the phone. I think it had something to do with the switch inside the jack port that controls where the sound goes. Anyway that fixed mine but im not sure whats happening with yours.
The wizard has 3 speakers
2 Stereo speakers, one on each side
1 Speaker for calling in between the flashing lights
intheloft said:
A while ago i had a similar problem where the phone thought my wired headset was plugged in and would not send the sound to the speakers... Only the headset, so i put some music on and plugged the headset in and out pretty fast until the sound came out the speakers in the phone. I think it had something to do with the switch inside the jack port that controls where the sound goes. Anyway that fixed mine but im not sure whats happening with yours.
The wizard has 3 speakers
2 Stereo speakers, one on each side
1 Speaker for calling in between the flashing lights
Click to expand...
Click to collapse
Thats very true, if headset is used often or used much of the time,then the clips inside the jack port get over stretched and won't come back to it's original place after the input jack of headsets is plugged out,thus,not allowing to pass through the voice to the speakers.
Hi again! thanks for your replay!
Yes it was true about the mini jack! A good cleaning have solve 50% of the case!
The sound now cames out from the 2 stereo speakers ! But not from the speaker for calling!
I'm start to suspects from the speaker! Is it hard to dismount the wizard ???
Regards ,
Rui
zabardast_1 said:
Thats very true, if headset is used often or used much of the time,then the clips inside the jack port get over stretched and won't come back to it's original place after the input jack of headsets is plugged out,thus,not allowing to pass through the voice to the speakers.
Click to expand...
Click to collapse
THANK YOU!!!
Thanks guys. Had the same problem and the cleaning seems to have helped for now.
Hello all,
since yesterday I have a serious problem with my Ameo.
When making a phone call or running media player there is no sound through the loudspeakers, even testing ring-tone or alarm sound is not working.
However, when a phone call comes in, I get the ringtone through the loadspeakers.
Tried soft and hard reset - both ot making anything better.
What can I do ?
Thanks for your help
Dieter
Now I discovered something strange:
After making a hard-reset, I get for about 1 second sound through the speakers.
Also after re-flashing the ROM I get for about a second somethin through the speakers.
Anybody an idea ?
Dieter
hi
have you used the headphones bevore the sound was gone? there are serval isues on htc devices that after unpluging the headphones one of the contacts inside the headphonejack of the device is not switching back to its normal position so the athena still thinks that the headphones are connected and is sending all output to theme. i had these also one time on my universal.
greetings mad
Hello mad,
thanks for the information. Putting in and out the jack twice got it running again.
Thanks so far.
Dieter