I've tried to upgrade my Joying JY-UO138N4PX5S without DSP, and something went wrong.
Before upgrade I had APP version 0.0.72, MCU TP6735 4.42
I've successfully installed MCU update TP6735_V4.51 from Joying website:
After that I tried to install firmware 8.1 V0.0.125 from from Joying website:
Looks like it was installed and asked to remove USB drive, I've removed USB drive and it unit went for a reboot.
After reboot unit stuck on Android logo, I've made video here: youtube.com/watch?v=ZJUmcC3SsxA
I've tried to get to recovery mode, but not succeeded. I put firmware to SD Card, but also not succeeded to boot from it.
There is two buttons RST and POW, I've tried to pushed it in different ways, but not succeeded to get to recovery mode.
Do someone know how can I get to recovery mode and fix this unit?
Thanks
Related
I just bought a Belsee Tesla style Android head unit with PX6 (double din, 1980*1080, 4G, 32G)
After installation for about 1 h, and I changed the boot logo to a new high resolution one. Then it did not work, stop at boot logo
The seller has send me a px6_format zip file and let me put it into a disk, plug the disk and restart the unit to recovery. But this method did not work. The unit kept at logo with no reaction.
I also tried many other method to try to enter recovery mod, but no luck.
Who can help me with this? Happy to pay for it! Thanks
pictures of this unit attached
ibb.co/z225dCS
ibb.co/StL3zwS
ibb.co/SvCYCzx
ibb.co/4FdgX4r
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
JohnnyMHo said:
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
Click to expand...
Click to collapse
I've tried every method, but no luck.
I removed the core board, and post it to the seller for an exchange. Then it works again. But the radio now cannot find any channel.
Terrible head unit, strongly suggest every one do not buy this type of trash.
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
@rafaelreis said:
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
Click to expand...
Click to collapse
Completing the above information.
My android unit is Seicane 2din 10.1 "Android 8.1" Model sp9853l_1h10_vmm
Model: sp9853l_1h10_vmm
Android Version: 8.1.0
RAM: 1 GB
ROM: 16 GB
Build Number: K4001_NWD_S212701.20181213.15240009.N0026.01
Screen: 1024 * 600
Guys, I got the android update with the Chinese, everything is working normally. But I still can't get into the advanced fastboot recovery mode of Android, but I don't know the reset button (RST) combinations to display.
For those who need help have a Russian site https://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=seicane&x=18&y=13 with all the information of this android unit.
Chinese update link: http://download.seicane.com/doc/80/....0.3d903e5fWaVqTw&file=H6android8.1update.zip
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
@rafaelreis said:
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
Click to expand...
Click to collapse
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
C75 said:
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
Click to expand...
Click to collapse
@C75 I downloaded the file, I'll try again, but I'll try the new firmware in a few months, because I'm on a business trip, thanks for sharing.
Here you have recovery files I got from chinese store AUTOTOP when asked from another account (on which they havent blocked me)
Android 8.1 with "bmw os 1.09"
BMW-8227L_demo.zip
drive.google.com
There are instructions how to proceed recovery but shortly: You have to format pendrive to fat32 and put folder CKXUPG on it. Like for example E:\CKXUPG\~files that are in CKXUPG~. Then You should plug that pendrive in one of USB cables from radio (I dont remember which one, I tried both till success). There is a reset button on left side of radio that you can use for trying another cable, you dont need to unplug car battery or whatsoever
There is no newer version than Android 8.1. All androids 8+ works worse than this one and are faked androids 10....
I also have version of "bmw os 1.26 with fake android 10":
BMWID6_OS_1.26--10.0.zip
drive.google.com
and version "bmw os 1.31" but I think i didnt manage to update to that version:
XRC_BMW_OS_1.31.zip
drive.google.com
p.s. from what I remember if everything is OK there should be some console output running in left top corner right few seconds after booting. If it doesnt happen you get stuck on bootlogo and have to reset device.
BTW. dont try to use Media button or "Your BMW tab" untill you configure headunit in factory settings (few times click on android version and then inserting 8888 code. If you dont have CCC/CIC and you selected wrong options the headunit is trying to display signal from CCC/CIC and you're basically stuck.
hello do you have the mcu update please cordially
Hi is there anyone on these forums that can repair one of these chinese units
I have one of these https://www.ebay.co.uk/itm/384770479698 in my 2006 Merc. its a MTK8667 Android 11 based unit. FF_866X is the device name, i'm sorry I do not know the MCU
I was sent some update files from the seller https://we.tl/t-UeDC40i6Ul XRC-8667 升级软件 Q腾实UI多合一-国外-1280x720_v32_20220223
during the update process it copied the superimage ok but then something came up in red but it came up to a kind of recovery and said erasing... it then rebooted it gets to the car logo screen, before android screen then goes to a blank screen with the following in bottom left corner...FASTBOOT MODE and wont go any further
I have pressed RST then two fingers on screen until i get "detected" but all i get is the same fastboot mode again,
I have redownloaded and extracted the firmware and reformatted my usb drive to fat32 and tried the whole process again and tried in both usb slots but no sucess.
I have obtained other mtk8667 firmware files 8667.bin and 8667.upd from this topic https://forum.xda-developers.com/t/firmware-junsun-v1-8667q-8g-128g-vhd-qled.4405475/ on this forum but I have tried many different ones and it just wont read the usb, still just goes straight to fastboot mode....is anyone able to help me I have messaged the seller but no reply
So far I have tried about 7 or 8 different firmware versions, the sellers own, some junsun versions, ossuret versions even xtrons versions(all in correct format of 8667.bin and 8667.upd on root of usb formatted to fat32 but it does not read the usb.
The usb slots are still working as I can plug my phone in and it charges but the unit does not seem to have a full recovery mode
I have tried using a program called adb and fastboot on the computer but will not connect to the head unit
I have manually installed MTK drivers to the computer and tries a program called magic thunder but again would not connect to the unit.
I have tried to find a memory dump online but nothing, all I can find for mtk8667 is firmware consisting of 2 files 8667.bin and 8667.upd
I have now removed the unit from the car so i tried removing everything but 1 usb slot and removing the power for 10 mins before powering up and attempting to flash again
So i think i'm in need of expert help, so i'm looking for a repair shop, or person that can take the unit and hopefully get it working, more than happy to pay a fair fee and to post it to you, or if you are within a couple of hours travel from Yorkshire(Leeds area) I will happily come to you
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Hello any solution?
Murdysouly said:
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Click to expand...
Click to collapse
Hey there,
If the update completes really quick, maybe it's because it isn't going properly.
Try various other usb sticks.
Normally you should have the time to read every steps during the update "writing partition blabla1, writing partition blabla2 ..." aso asf.
I had to try a dozen usb sticks before finding one that worked for me.
May be worth the try.
Godspeed