No one can fix my issue? Asus zenfone max pro m1 - Asus ZenFone Max Pro M1 Questions & Answers

Recently i flashed havoc 2.0 on my asus zenfone max pro m1. after a while i realized that my google play games doen't work. it says "something went wrong check your internet connection". Tried several wifi and mobile data still the same. ( also tried all versions of gaaps and other custom roms) So i decided to go back to the stock rom and relock since i thought it was that rom issue. But after getting back to official stock rom i still have the same problem "google play games" still doesn't work and also discover another problem that google camera doesn't work even if i enable "camera to api" . Now yesterday i have unlocked the bootloader again and flashed havoc 2.0 again and rooted again with magisk. But still "google camera" and "google play games" doesn't work. I am highly regreting flashing the custom rom. Is there any solution i just want to go back to all working official state or something like this. Is the any any any solution????

Flash official stock rom from fastboot as it will reset the device to factory state. It should fix everything. It will re lock the bootloader and all data will be lost

Already did . Nothing has changed!

oshikhan7 said:
Recently i flashed havoc 2.0 on my asus zenfone max pro m1. after a while i realized that my google play games doen't work. it says "something went wrong check your internet connection". Tried several wifi and mobile data still the same. ( also tried all versions of gaaps and other custom roms) So i decided to go back to the stock rom and relock since i thought it was that rom issue. But after getting back to official stock rom i still have the same problem "google play games" still doesn't work and also discover another problem that google camera doesn't work even if i enable "camera to api" . Now yesterday i have unlocked the bootloader again and flashed havoc 2.0 again and rooted again with magisk. But still "google camera" and "google play games" doesn't work. I am highly regreting flashing the custom rom. Is there any solution i just want to go back to all working official state or something like this. Is the any any any solution????
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=5862345805528056316
FLASH THIS IN TWRP
THEN UPDATE TO 338 BUILD I THINK THIS IS ENOUGH
IF U WANT TO LOCK BOOTLOADER RUN THIS RELOCK.CMD
https://androidfilehost.com/?fid=674106145207487458
RUN RELOCK.CMD THEN ALL UR PRBLMS MUST BE SOLVED

Related

"Can't connect to camera" Error

First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
the error when booted can be resoled by flashing the latest vendor img, or at least the one relevant to your roms version.
took me about 2 weeks to figure this out because no one would give me the slightest hint when i asked.
the error screen when it first tries to start i havent been able to resolve, and am thinking there may be none.
not sure what your camera issue could be, but i have seen cam issues from the kernel, when the switch to 6.0,1 first began to merge.
maybe test another kernel, other than that i dont know.
Samehere
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
I'm facing exactly the same issue. The camera works fine when I flash a stock based ROM like pure nexus or digitalhigh but as soon as I flash an aosp based ROM or cyanogenmod like chroma,screw'd,benzo. The camera says couldn't connect to camera and nothing seems to work. I've wiped cache, data but still no progress.
I even tried the flashable camera.zip but didn't work.
Problem Solved !!!
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
wrahul31 said:
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
Click to expand...
Click to collapse
Thanks, I have reverted to stock ROM but I might try it soon

Popup camera not working on xiaomi mi 9t with custom ROM

After smashing my head against the limits of the MIUI again, i decided to say goodbye to my warranty and flash a custom rom. Via TWRP I flashed the latest (stable) version of Arrow OS based on android 10Q. Everything works perfectly aside from the popup camera, that appears to be firmly locked in place feeding live feed from inside the chassis. Thinking it was an error of that release, i tried other ROMs, both Android 9 and 10, ResurrectionRemix, Lineage. With RR the problem is the same, while with Lineage, the camera asks for a calibration: it actually pops out fully does two or three pops and then it says calibration failed. The servos are working, I've opened the chassis and found no dust at all, so I've looked for a fix online. The most common one is a flash of the stock 'persist.img' image, I've tried several times via TWRP, tried a few clean flashes (ROM+image) of different versions and nothing. Am I missing something? I don't want to get back to MIUI...
Did u backup your persist partition before ? if no u can flash any other one that comes in the fastboot stock rom but u will loose L1 (netflix in HD)
The problem persists.
Badis st said:
Did u backup your persist partition before ? if no u can flash any other one that comes in the fastboot stock rom but u will loose L1 (netflix in HD)
Click to expand...
Click to collapse
I did, but even when I tried flashing different versions of persist.img ranging from fastboot stock firmware 10 to 12, with and without backup, (clean wipe, fresh recovery) the problem was still present. I'm no expert but I'd guess the OS doesn't know how to: either tell the servos to pop the camera out (Arrow OS) or recognizing the camera working when calibrating (Lineage OS). I'm trying to dig my way to the cam app in the MIUI release and to install it in the custom ROM, but I don't think it works.

"Android setup isn't responding" and reboot by itself

Hi,
I have strange problem, used 9T come to me with wiped system (factory reset) but when MIUI loaded system i have notification "Android setup isn't responding". I can't accept it or anythink, configuration screen isn't loaded only black screen with status bar and navigation buttons. I can go to settings by the notifiaction bar, but after 10 seconds phone freezing and rebooting by itself.
I flash new system without errors, but it wont fix the problem
I had the same problem, I spent all the roms and the only one that worked was davinci_global_images_V10.3.5.0.PFJMIXM_20190528.0000.00_9.0_global_4222a49ff1
good that the phone is working again but now i'm facing other problems because i can't update the phone otherwise it goes back to loop and with this rom no sensor is working as a presence sensor, gyroscope and also problems with the front camera that is not it is working correctly.
crt-shadow said:
Hi,
I have strange problem, used 9T come to me with wiped system (factory reset) but when MIUI loaded system i have notification "Android setup isn't responding". I can't accept it or anythink, configuration screen isn't loaded only black screen with status bar and navigation buttons. I can go to settings by the notifiaction bar, but after 10 seconds phone freezing and rebooting by itself.
I flash new system without errors, but it wont fix the problem
Click to expand...
Click to collapse
crt-shadow said:
Hi,
I have strange problem, used 9T come to me with wiped system (factory reset) but when MIUI loaded system i have notification "Android setup isn't responding". I can't accept it or anythink, configuration screen isn't loaded only black screen with status bar and navigation buttons. I can go to settings by the notifiaction bar, but after 10 seconds phone freezing and rebooting by itself.
I flash new system without errors, but it wont fix the problem
Click to expand...
Click to collapse
i have the same problem do you have the solution right now? :<
Same problem here. I also can't turn on the wifi and sim cards aren't detected
crt-shadow said:
Hi,
I have strange problem, used 9T come to me with wiped system (factory reset) but when MIUI loaded system i have notification "Android setup isn't responding". I can't accept it or anythink, configuration screen isn't loaded only black screen with status bar and navigation buttons. I can go to settings by the notifiaction bar, but after 10 seconds phone freezing and rebooting by itself.
I flash new system without errors, but it wont fix the problem
Click to expand...
Click to collapse
same here, keep rebooting, u solved it?
Factory reset does not mean to Wipe System but Data.
Gyroscope and other sensors not working are the result of wiping Persist, Vendor and other partitions
Proper procedure to switch the ROM/install custom ROM requires:
- Format Data (option in TWRP, exactly as that "Format Data")
- Wipe Cache
- Do not Wipe any other partition !!!!!!!
- Flash your custom ROM
Unfortunately, there are noobs who don't know/understand, and they Wipe System, Vendor, Persist and who knows what other partitions they think off.
The result is the phone behaving as described
To recover, try flashing the TGZ stock ROM from Mi Flash (not just the ZIP ROM from TWRP).
Anyway, if Persist was wiped, you will never, ever recover DRM L1
zgfg said:
Factory reset does not mean to Wipe System but Data.
Gyroscope and other sensors not working are the result of wiping Persist, Vendor and other partitions
Proper procedure to switch the ROM/install custom ROM requires:
- Format Data (option in TWRP, exactly as that "Format Data")
- Wipe Cache
- Do not Wipe any other partition !!!!!!!
- Flash your custom ROM
Unfortunately, there are noobs who don't know/understand, and they Wipe System, Vendor, Persist and who knows what other partitions they think off.
The result is the phone behaving as described
To recover, try flashing the TGZ stock ROM from Mi Flash (not just the ZIP ROM from TWRP).
Anyway, if Persist was wiped, you will never, ever recover DRM L1
Click to expand...
Click to collapse
The same problem remains even after your method.
pranav1201 said:
The same problem remains even after your method.
Click to expand...
Click to collapse
What exact problem, with which ROM, what did you previously do with the phone?
Hello @zgfg
I'm having the same error as the OP with my Mi 8 (dipper).
I done goofed up, as I had the official 12.0.3.0 stock ROM installed, and then I wanted to go with the 12.5.2.0 EU ROM. I installed it no problem, but then in my infinite wisdom I tried to lock the bootloader via fastboot while having the EU ROM installed. Everything went to hell after that.
After that, I cannot make the phone work properly regardless of the ROM I try to install. With MIUI (both stock and EU), I cannot get the WiFi to work properly (Ino networks are shown), and the "Android Setup isn't responding" error does not let me finish the setup of the device. I also tried lineage, where I also cannot find any networks, so the setup pretty much stops there.
It is obvious I effed up something with lower-level files, I definitely just erased everything from TWRP at one point when I was panicing.
I tried flashing the stock ROM using Mi Flash as you said, but it did not work. Can you provide me a way of checking what is going wrong or a general way to fix this?
Fjolfrin said:
Hello @zgfg
I'm having the same error as the OP with my Mi 8 (dipper).
I done goofed up, as I had the official 12.0.3.0 stock ROM installed, and then I wanted to go with the 12.5.2.0 EU ROM. I installed it no problem, but then in my infinite wisdom I tried to lock the bootloader via fastboot while having the EU ROM installed. Everything went to hell after that.
After that, I cannot make the phone work properly regardless of the ROM I try to install. With MIUI (both stock and EU), I cannot get the WiFi to work properly (Ino networks are shown), and the "Android Setup isn't responding" error does not let me finish the setup of the device. I also tried lineage, where I also cannot find any networks, so the setup pretty much stops there.
It is obvious I effed up something with lower-level files, I definitely just erased everything from TWRP at one point when I was panicing.
I tried flashing the stock ROM using Mi Flash as you said, but it did not work. Can you provide me a way of checking what is going wrong or a general way to fix this?
Click to expand...
Click to collapse
Sorry, I would never go to relock BL while having the custom ROM (I thought it would instantly brick the phone)
Not sure could I help but I'm also curious:
- You relocked the Bootloader by fastboot oem lock or by fastboot flashing lock?
- It locked BL, did Factory reset but kept Xiaomi.eu ROM?
- After that you unlocked BL again (otherwise how would you continue flashing the other ROMs)?
- Did you then unlock BL by Mi Unlock tool or by fastboot flashing unlock?
- Did you then you flash Fastboot/tgz version of the stock MIUI?
And with that the phone does not work properly (network, etc)?
- What version of MIUI you flash, MIUI 12.1 (Global, EEA)?
- Did you try with CN 12.5.2.0, Fastboot/TGZ version (closest Fastboot MIUI version to your previous Xiaomi.eu)?
Un-gzip, unutar, find inside bat scripts (I think 3 of them) choose one that makes Factory reset but does not relock BL.
Edit the script to remove first 3-4 lines that check against downgrading (not having the script in front of me to tell you exactly but you will see when you open the script), and run the bat from Fastboot
zgfg said:
Sorry, I would never go to relock BL while having the custom ROM (I thought it would instantly brick the phone)
Not sure I could help but I'm also curious:
- You relocked the Bootloader by fastboot oem lock or by fastboot flashing lock?
- It locked BL, Factory reset but kept Xiaomi.eu ROM?
- After that you unlocked BL again (otherwise how would you flash the other ROMs)?
- You unlocked BL by Mi Unlock tool or by fastboot flashing unlock?
- Then you flashed Fastboot/tgz version of the stock MIUI?
And with that the phone does not work properly (network, etc)?
- What version of MIUI you tried to flash, MIUI 12.1 (Global, EEA)?
-Did you try with CN 12.5.2.0, Fastboot/TGZ version?
Un-gzip, unutar, find inside bat scripts (I think 3 of them) choose one that makes Factory reset but does not relock BL.
Edit the script to remove first 3-4 lines that check against downgrading (not having the script in front of me to tell you exactly but you will see when you open the script)
Click to expand...
Click to collapse
Thanks for the reply! Here we go:
1. By fastboot oem unlock.
2. I am not sure I remember. I think it could not boot at all.
3. Yes I unlocked it.
4. I have always used the Mi unlock tool to unlock the bootloader.
5. Yes I flashed it this way and it did not work. To be precise, I completely extracted the tgz, I opened Mi flash, selected the final extracted folder, and I flashed this way.
6. With Mi flash I have used the official rom, meaning 12.0.3.0 global (in case you did not read it, this is all for a Mi 8, I just found this thread and though to ask). When I install the EU rom, I use twrp.
7. No I haven’t tried Chinese roms, should I?
I have also tried directly running the bat scripts from the extracted folder as you said, but it didn’t work. Same thing.
Fjolfrin said:
Thanks for the reply! Here we go:
1. By fastboot oem unlock.
2. I am not sure I remember. I think it could not boot at all.
3. Yes I unlocked it.
4. I have always used the Mi unlock tool to unlock the bootloader.
5. Yes I flashed it this way and it did not work. To be precise, I completely extracted the tgz, I opened Mi flash, selected the final extracted folder, and I flashed this way.
6. With Mi flash I have used the official rom, meaning 12.0.3.0 global (in case you did not read it, this is all for a Mi 8, I just found this thread and though to ask). When I install the EU rom, I use twrp.
7. No I haven’t tried Chinese roms, should I?
I have also tried directly running the bat scripts from the extracted folder as you said, but it didn’t work. Same thing.
Click to expand...
Click to collapse
1) Should have been "lock", not "unlock"
7) If I understood correctly, you had Xiaomi.eu 12.5.2.
Hence I think you should try the closest MIUI version (Fastboot, not Recovery - Fastboot flashes more deeply), and that could only be CN 12.5.2 (Global, EEA are 12.0.3 for your device)
The best would be Fastboot version of Xiaomi.eu 12.5.2 but AFAIK, there is no such thing
Hence after the CN 12.5.2 try then (Recovery) Xiaomi.eu 12.5.2
zgfg said:
1) Should have been "lock", not "unlock"
7) If I understood correctly, you had Xiaomi.eu 12.5.2.
Hence I think you should try the closest MIUI version (Fastboot, not Recovery - Fastboot flashes more deeply), and that could only be CN 12.5.2 (Global, EEA are 12.0.3 for your device)
The best would be Fastboot version of Xiaomi.eu 12.5.2 but AFAIK, there is no such thing
Hence after the CN 12.5.2 try then (Recovery) Xiaomi.eu 12.5.2
Click to expand...
Click to collapse
1) Yeah lol, mistyped.
7) Ok! I’ll give it a try. I have an early wake tomorrow tho and I have already spent too much time for this, so it’ll be a while before I come back with news.
Thank you!
You can use MIUI Downloader:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
to easily locate the download link for eg your Fastboot CN 12.5.2 - screenshot
zgfg said:
You can use MIUI Downloader:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
to easily locate the download link for eg your Fastboot CN 12.5.2 - screenshot
Click to expand...
Click to collapse
Good morning!
So I installed the china ROM (12.5.2.0 QEACNXM) using mi flash, and I'm having similar issues. I did not get the "android setup stopped working", however WiFi is still not responding as before, and I got two "Security stopped working" and "Settings stopped working" errors.
Edit: WiFi cannot actually be turned on at all.
Fjolfrin said:
Good morning!
So I installed the china ROM (12.5.2.0 QEACNXM) using mi flash, and I'm having similar issues. I did not get the "android setup stopped working", however WiFi is still not responding as before, and I got two "Security stopped working" and "Settings stopped working" errors.
Click to expand...
Click to collapse
Sorry, no other idea but that you try now again Xiaomi.eu 12.5, with Factory reset
zgfg said:
Sorry, no other idea but that you try now again Xiaomi.eu 12.5, with Factory reset
Click to expand...
Click to collapse
Got it, will try that, adn if it doesn't work I'll see whether I can do something else to fix this.
Anyway, thanks a lot!
Fjolfrin said:
Good morning!
So I installed the china ROM (12.5.2.0 QEACNXM) using mi flash, and I'm having similar issues. I did not get the "android setup stopped working", however WiFi is still not responding as before, and I got two "Security stopped working" and "Settings stopped working" errors.
Edit: WiFi cannot actually be turned on at all.
Click to expand...
Click to collapse
Btw, Bluetooth, NFC, GPS, do they work?
And first, not least, do SIM cards work (voice and mobile data)?
And did you try switching now from CN 12.5 back to Xiaomi.eu 12.5 (they are based on CN, but made to work internationally)
zgfg said:
Btw, Bluetooth, NFC, GPS, do they work?
And first, not least, do SIM cards work (voice and mobile data)?
And did you try switching now from CN 12.5 back to Xiaomi.eu 12.5 (they are based on CN, but made to work internationally)
Click to expand...
Click to collapse
I didn’t try these tbh, but I did go back to the 12.5 EU ROM.
This time I can get inside the phone normally, however Wi-Fi is still sketchy.
I managed to connect to a network, but manually, it still wont scan for network, and the connection is dropped after some minutes. I didn’t try gps, bt, or nfc, as I was trying to troubleshoot Wi-Fi, and this all came to a halt as the phone reboots on its own after 5-10 minutes of operation.

Redmi k20 gets stuck while trying to play sound

Since Friday my device is restarting automatically with error DEVICE CLOSED UNEXPECTEDLY
I tried hard reset went to service centre they did an software upgrade and then a downgrade to 12.0.3 from 12.0.5 but nothing worked
And now when i try to play any sound whether through YouTube , Music etc it is just crashing
Even the Sound settings are not opening and i couldn't connect to calls either and volume keys are also not working
Seems like hardware problem
But other things are working
Are you sure they did upgrade and downgrade?
Was it full wipe?
It recommend to flash custom ROM and see if sth cbange
Yes they did downgrade from 12.0.5 to 12.0.3
And I had full wiped from recovery 2-3 times
And yesterday I noticed one more thing my front pop-up camera was working fine but when I enabled sound effect for it
It just freezes
Ok, so that's officially India MIUI issue
try this
This is ultra battery saving option related and they're working on an update
i have already tried all these but nothing works and how my device is stuck in fastboot mode while trying to flash stock rom through mi flash tool
You mentioned earlier that phone is boiting, but it restarts often.
What error in miflash?
Yes it was booting then only when I tried to flash miui11 through mi flash tool it got stuck in fastboot mode
Mi flash was giving crclist error everytime
Anyways I have successfully flashed miui 11 through twrp but the above problems are still there
I had exactly the same issue with this device.
Then tried 5/6 custom roms of android 11.
Nothing worked, every os had it's own issue.
Then lastly I've installed PIXEL EXPERIENCE 10 PLUS rom and the phone started to work fluid.
I have a same problem. Whenever accessing sound, if freezes and restarts! Went to Mi center. They said they have to replace the motherboard . Actually it's one of the IC that's malfunctioning... Here's a video -
Let e know If there's any ROM that gets around this issue
nilanjan.joy said:
I had exactly the same issue with this device.
Then tried 5/6 custom roms of android 11.
Nothing worked, every os had it's own issue.
Then lastly I've installed PIXEL EXPERIENCE 10 PLUS rom and the phone started to work fluid.
Click to expand...
Click to collapse
Didn't work for me
shrae said:
Let e know If there's any ROM that gets around this issue
Click to expand...
Click to collapse
Pixel Experience 11 plus worked fine, except the Audio problem still remains :-(
Gopalakrishnan V said:
Pixel Experience 11 plus worked fine, except the Audio problem still remains :-(
Click to expand...
Click to collapse
Did you manage to solve your problem? I have the same issue and dont know what to do
levarete said:
Did you manage to solve your problem? I have the same issue and dont know what to do
Click to expand...
Click to collapse
Nope the audio issues cannot be fixed with any software. I think it's caused due to some IC failure.
You would have to change the motherboard to fix the issue or you have to be a professional electronics engineer who knows and have the equipment for micro soldering.
The same issue was encountered with me also. I am in great distress right now. Tried more than 30+ ROMs (including recover, fast boot, custom, and stock), but nothing helps.
IF you find anything please update here.. THat’ll be a great help indeed!!
Here’s my thread: https://forum.xda-developers.com/t/...dphone-and-many-features-not-working.4309769/

Can't Rollback To Miui Rom

While ago I changed my rom from Stock Miui to MiuiMix it was very smooth and then I wanted to try some aosp based rom after a while of using them I tried to go back to miui mix but everytime I install it the phone freezes and reboots itself automatically I can't even get pass the Set up wizard with all this freezing, I managed to get pass it but most of apps don't work or work but after restarting they don't work, I tried different miui based rom and all Stock roms with different version the only version that was working fine was 10.3.x but after updating it the freezes and rebooting and weird auto action started again, I did some digging i found out in An xda thread some guy has similar problem and they said it has something to do with persist so i flashed a new persist but nothing changed now i lost L1 DRM and gor stuck with L3 DRM, now I'm on PixelOS everything works fine but can't get back to MIUI.
Data formated in recovery?
Which firmware do you use?

Categories

Resources