My brother has a a6000,he wanted me to make his phone faster and smoother so i installed miui 8 rom on his device ,after a month he got notification update and he update it via updater app. As a result the phone is now hardbricked with no fastboot and no recovery. I try to flash stock rom with qcom dloader 1.02 but it stuck in sahara for a very long time, the i try with qfil and also get sahara error. I try every method to solve sahara error like copy and paste firmware file in c /program file/qualcomm/qpfst/bin but it solve nothing. Please help me if you know other ways to flash stock rom or other ways to solve sahara error
While downloading with qfil or any other program make sure you have the latest version of that downloading app. Even I had a similar situation but when I found a newer version of the downloader app it worked fine while installing stock lollipop.
siddarth25 said:
While downloading with qfil or any other program make sure you have the latest version of that downloading app. Even I had a similar situation but when I found a newer version of the downloader app it worked fine while installing stock lollipop.
Click to expand...
Click to collapse
I try with qcomdloader 1.06 but it always says sending result and i try with latest qfil but same error like another version
tiarzhaili said:
I try with qcomdloader 1.06 but it always says sending result and i try with latest qfil but same error like another version
Click to expand...
Click to collapse
Which guide or video are you following?
tiarzhaili said:
I try with qcomdloader 1.06 but it always says sending result and i try with latest qfil but same error like another version
Click to expand...
Click to collapse
siddarth25 said:
Which guide or video are you following?
Click to expand...
Click to collapse
This https://forum.xda-developers.com/lenovo-a6000/how-to/guide-hard-brick-lenovo-a6000-t3581892
try this https://www.youtube.com/watch?v=d_-VtzKV4-E
siddarth25 said:
try this
Click to expand...
Click to collapse
Same problem and same error
Before this occurred was usb debugging turned on?
siddarth25 said:
Before this occurred was usb debugging turned on?
Click to expand...
Click to collapse
I dont sure but i think yes
I did same thing on my phone but my phones display goes blank......Working but display was blank.
So I took it to service center they repaired it
My imei not working using jiofi
Related
My samsung s4 GT i9505 was working on 4.3 os last from few days some error on display (Google stop service Like this ) i try to new Rom 4..4.2 by Odin
3.9,during installation Rom one Fail message on odin and after phone show on display phone Recovery mode with kies ,but my phone not connected with kies software.but phone going in downloading mode ,
please help me how can solve problem and how can Repair and which tool and Rom and other files use ?
atifmz said:
My samsung s4 GT i9505 was working on 4.3 os last from few days some error on display (Google stop service Like this ) i try to new Rom 4..4.2 by Odin
3.9,during installation Rom one Fail message on odin and after phone show on display phone Recovery mode with kies ,but my phone not connected with kies software.but phone going in downloading mode ,
please help me how can solve problem and how can Repair and which tool and Rom and other files use ?
Click to expand...
Click to collapse
Hi ,
Make sure Kies if totally off when flashing , download rom again , try once more
MAX 404 said:
Hi ,
Make sure Kies if totally off when flashing , download rom again , try once more
Click to expand...
Click to collapse
Kies i already uninstall from computer
atifmz said:
Kies i already uninstall from computer
Click to expand...
Click to collapse
First of all there is no need to use large bold format.
You did not mention that fact , try downloading rom again
MAX 404 said:
First of all there is no need to use large bold format.
You did not mention that fact , try downloading rom again
Click to expand...
Click to collapse
i try with 4 to 5 Rom all same this issue.i try with these Rom
I9505XXUGNE5_I9505OXAGNE5_I9505XXUGNE5_HOME.tar
I9505XXUEMKE_I9505OXAEMKE_I9505XXUEMKE_HOME.tar
I9505XXUEMK9_I9505EVREMK1_I9505XXUEMK9_HOME.tar.md5
I9505XXUGNE8_I9505VFGGNE2_I9505XXUGNE8_HOME.tar
always fail message
atifmz said:
i try with 4 to 5 Rom all same this issue.i try with these Rom
I9505XXUGNE5_I9505OXAGNE5_I9505XXUGNE5_HOME.tar
I9505XXUEMKE_I9505OXAEMKE_I9505XXUEMKE_HOME.tar
I9505XXUEMK9_I9505EVREMK1_I9505XXUEMK9_HOME.tar.md5
I9505XXUGNE8_I9505VFGGNE2_I9505XXUGNE8_HOME.tar
always fail message
Click to expand...
Click to collapse
Hi ,
Maybe something went wrong during flashing , check this thread , excellent guide to fix possible soft brick
http://forum.xda-developers.com/showthread.php?t=2265477
Almost all Odin errors can be resolved by the following:
- Different cable
- Different usb port
- Different pc.
- Try reinstalling the drivers (you can do this by reinstalling kies). Then make sure kies is not running in the background (alt+ctrl+del)
Lennyz1988 said:
Almost all Odin errors can be resolved by the following:
- Different cable
- Different usb port
- Different pc.
- Try reinstalling the drivers (you can do this by reinstalling kies). Then make sure kies is not running in the background (alt+ctrl+del)
Click to expand...
Click to collapse
Thanks,after Kies update driver Rom download perfect but now problem in Wifi not working ,How can fix ?
Hi Friends.. Need some help... From last 3 days my device Back camera is not working.... Tried many camera apps but only front camera working.. Yesterday it showed the button to Switch to back camera, but when I clicked it, only blank screen use to come with a message (Media server died closing camera... Sometimes it used to say Can't connect to camera) tried force stop and clearing data... Didn't work.. From today morning it's not even showing the button to Switch to back camera... What to do??
Running Xenon HD rom.. Tried flashing AOSP EXTENDED ROM and restored my backup of 6.0.1 Resurrection Remix... It didn't help either... Plz need suggestions
flash factory firmware.
bablu048 said:
flash factory firmware.
Click to expand...
Click to collapse
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC
syedafzal.shah said:
Where can I find that for my xt1562? Can I do that with TWRP... I don't have a PC
Click to expand...
Click to collapse
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.
bablu048 said:
https://firmware.center/firmware/Motorola/Moto%20X%20Play/Stock/XT1562/
You need a PC for this.
Click to expand...
Click to collapse
In that Link Indian Version has 0 Bytes size.....
syedafzal.shah said:
In that Link Indian Version has 0 Bytes size.....
Click to expand...
Click to collapse
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"
bablu048 said:
Its 1.3gigs mpd24-107-70-1
"XT1562_LUX_RETASIA_DS_6.0.1_MPD24.107-70-1_cid7_subsidy-DEFAULT_CFC.xml.zip"
Click to expand...
Click to collapse
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....
syedafzal.shah said:
One last thing... Is there any way to flash this without PC..? Iam running on a custom ROM and I have TWRP.... And If PC is the only way then How to Do that..? I checked few sites about flashing a firmware but they all are saying that to flash that we must type some codes and some of those codes will be different for every device....
Click to expand...
Click to collapse
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
OK.. Will try after few days as I don't have PC now... Thanks
bablu048 said:
No you need a PC to flash stock rom. If you took a nandroid backup of stock rom try restoring that and see if the problem is fixed.
You need to download Motorola flashing tool- RSD LITE.
No, need to manually type in all the codes.. Youtube "flashing motorola firmware using rsd lite" thats all you need.
Click to expand...
Click to collapse
RSD Lite not detecting My device
syedafzal.shah said:
RSD Lite not detecting My device
Click to expand...
Click to collapse
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.
bablu048 said:
it should enable developer-options and adb-debugging. and i think rsd lite doesn't work on windows 10, try it on windows 7 machine.
Click to expand...
Click to collapse
OK... So last night I flashed the stock firmware... By typing all codes manually... Running stock Rom now.. But still back camera not working.. It's not even showing the button switch to back camera in camera app
Update : It wsas a hardware issue... went for repair.. It works now... Thanks
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
I couldn't make the youtube thinggy work lol but here's the link in case you guys wanna know what's going on with my piece of brick lol
https://www.youtube.com/watch?v=xX8_RgSS5x0
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
bkores said:
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
Click to expand...
Click to collapse
Thanks man i tried that one too no luck :C
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yes man i tried it but i had no luck :C, thanks
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
J0nhy said:
Yes man i tried it but i had no luck :C, thanks
Click to expand...
Click to collapse
Use this driver
Restart - enter EDL again
Flash "B15-NEW_FULL (Nougat)" (the full one, not the twrp one)
lafester said:
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
Click to expand...
Click to collapse
Cannot turn off or on my device i cannot not do anything the only thing it does is a sound every time i plug it in to my pc
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
lafester said:
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
Click to expand...
Click to collapse
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thanks. I kept getting partition type errors. The link you posted kept having network errors and dropping. It wasn't till after midnight pst that I got a stable connection and downloaded the whole thing. It flashed great and my phone is up and running. I was thinking I would have to send my phone in.
J0nhy said:
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
Click to expand...
Click to collapse
Yeah that's the kind of errors that suck /real/ bad. Good on you for not giving up. Now you know and you'll help spread the gospel of "keep trying until you can prove that it's actually an issue".
Today i tried to update to oreo by LG Bidge. i've waited for 2 hours to download the 2.8G update files, then while updating it stopped saying retry, tried again and it stopped and had to do it all over. Now i'm stuck on fastboot screen and keep downloading this update for hours and getting the same errors whithout knowing the problem.
I 've tried to unlock but the OEM isn't enabled and there is no way to do it from fastboot.
Please help me i don't know what to do
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
basicreece said:
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
Click to expand...
Click to collapse
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
jopanda said:
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
Click to expand...
Click to collapse
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Noxxit said:
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Click to expand...
Click to collapse
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
jopanda said:
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
Click to expand...
Click to collapse
Thank you. Now I tried it on a third PC and replaced the USB cable with the original one. I don't know what part of that was the solution but it worked. Although I had to rerun the update as it was interrupted on the first procedure.
Theres no sign of life only qc9008 port
I used qfil but it fails at sahara server problem any other help?
airaf0017 said:
Theres no sign of life only qc9008 port
I used qfil but it fails at sahara server problem any other help?
Click to expand...
Click to collapse
And what made you think that flashing M2 ROM on M1 phone will give you superpowers ? Try posting logs / pics / errors.
Tianhe said:
And what made you think that flashing M2 ROM on M1 phone will give you superpowers ? Try posting logs / pics / errors.
Click to expand...
Click to collapse
:laugh:
By mistake i downloaded the wrong zip and it had no description of model for which it is
airaf0017 said:
By mistake i downloaded the wrong zip and it had no description of model for which it is
Click to expand...
Click to collapse
Again, without errors / logs / screenshots I don't think you will be getting much help. Also include the status of device connection in device manager (PC)
Device manager:qualcomm 9008 usb device
Phone:no signs of life
Tried qfil method to flash but i end up at error sahara failed
try this: https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420
https://4pda.ru/forum/index.php?showtopic=907018
try here so many solutions
airaf0017 said:
Theres no sign of life only qc9008 port
I used qfil but it fails at sahara server problem any other help?
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/as...brick-unbrick-hardbricked-max-pro-m1-t3829754
airaf0017 said:
Theres no sign of life only qc9008 port
I used qfil but it fails at sahara server problem any other help?
Click to expand...
Click to collapse
I think the phone is hard bricked !!