Today i tried to update to oreo by LG Bidge. i've waited for 2 hours to download the 2.8G update files, then while updating it stopped saying retry, tried again and it stopped and had to do it all over. Now i'm stuck on fastboot screen and keep downloading this update for hours and getting the same errors whithout knowing the problem.
I 've tried to unlock but the OEM isn't enabled and there is no way to do it from fastboot.
Please help me i don't know what to do
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
basicreece said:
Flash with LGUP and Uppercut.
Search the forum for the KDZ file.
Put phone in Download mode, load the KDZ file and flash.
Click to expand...
Click to collapse
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
jopanda said:
Thanks for your reply
I just updated the phone by another pc and it worked.
Thank you
Click to expand...
Click to collapse
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Noxxit said:
Hi can you tell me what the difference between those two PCs was? I have the same problem right now.
Click to expand...
Click to collapse
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
jopanda said:
Sorry but i don't know the difference just made an update to lg bridge then i updated the phone normally event if it took 3h to download the update
after that the phone installed the update and booted with the new oreo android
Click to expand...
Click to collapse
Thank you. Now I tried it on a third PC and replaced the USB cable with the original one. I don't know what part of that was the solution but it worked. Although I had to rerun the update as it was interrupted on the first procedure.
Related
i have a uae stock firmware lg p705. recently i connected the phone to lg pc suite and it showed that i had an update(v20b). but when i try to update using lg pc suite or that other lg upgrading software or even kdz....i`m unable to. when the phone starts to update and it changes mode to emergency mode, it gets the yellow emergency screen for about 4 secs then it changes to weird messed up lines. i`ve attached a screenshot of the weird lines screen for reference. please help me i am dying to update my phone from the current v10f which is really laggy and slow.
P.S. i dont know y but it seems there is no OTA update coz its been more than 3 weeks since the latest update and it still hasnt shown up on OTA. PLS HELP ME!
Firstly, the JellyBean update will not be available through OTA , you'll get the notification on your phone but it'll say to connect to a computer to complete the upgrade. For your problem, try putting the phone into emergency mode BEFORE plugging in and use kdz to flash. Use 3GQCT for type and EMERGENCY for PhoneMode. Worth a try. :good: GoodLuck!
EDIT: Also, redownload any kdz file you're flashing, it can be a bad download too!
anwarkhan25 said:
Firstly, the JellyBean update will not be available through OTA , you'll get the notification on your phone but it'll say to connect to a computer to complete the upgrade. For your problem, try putting the phone into emergency mode BEFORE plugging in and use kdz to flash. Use 3GQCT for type and EMERGENCY for PhoneMode. Worth a try. :good: GoodLuck!
EDIT: Also, redownload any kdz file you're flashing, it can be a bad download too!
Click to expand...
Click to collapse
ok, will try. thnx anyway!
shamzali said:
ok, will try. thnx anyway!
Click to expand...
Click to collapse
You're welcome :good: :laugh:
anwarkhan25 said:
You're welcome :good: :laugh:
Click to expand...
Click to collapse
not working.....guess i`m doomed with ICS forever!!
can i update using cwm?
Well im not sure , i haven't played around with cwm on this Phone maybe someone else could help.
Sent from my LG-P705 using Tapatalk 4 Beta
I had a rooted LG G2 D802 on EE with KK update that was working fine until today...
I tried to flash a nice custom rom to it and well, to cut a long story short something went wrong and the next thing i know i have a phone which only shows up as about 10 hdd's in windows, and as QHSUSB_BULK in device manager.
I couldn't get it to go into download mode or anything, so i followed the Unbricking guide here:
http://forum.xda-developers.com/showthread.php?t=2582142
Unfortunately this appeared to do nothing for the phone, so i used the Tung Lee guide and this also did nothing.
After i did the above guide the phone was no longer recognised in windows or Linux, but thanks to this post:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
I was able to at least get it back to the state it was in in the first place.
After following all these guides i am now at a loss as to how to sort my phone out,and i'm hoping someone here can point me in the right direction for a fix..
When the phone was working, i put the imei into the firmware engine and it found me the D80220H firmware, i have tried using the bin files from the first guide and from D80220B as well with no luck, so i was wondering if one of the above guides do indeed work, how can i get the .img files i need from a D80220H KDZ?
Its been a long night and i'm now currently without my phone, i'm hoping someone can help and i can get my beloved G2 back to a working state before the weekend.
Thanks in advance, and sorry for the long post.
Tony
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Gonna try this during my lunchbreak today!
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
I was using the TWRP from that post, but then i downloaded the latest one and that didn't make any difference, I haven't tried that tool properly yet to get the .img files needed from the KDZ i have for D80220H, but i have flashed the aboot, boot and laf of D80220B and that didn't help either, i couldn't get it into recovery mode, download mode or anything! With the first tutorial i managed to get it into Hard reset mode, but it just hung on processing.
Thanks for the suggestions, i will try them during lunch and get back to you both, thank you so far!
Anyone else had the same problem as me, keep the suggestions coming, all are helpful and appreciated
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Shadowhunta said:
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Click to expand...
Click to collapse
follow this tutorial... same problem as yours https://www.youtube.com/watch?v=_d5b_osUTug
wisefreakz said:
follow this tutorial... same problem as yours
Click to expand...
Click to collapse
Followed that, still nothing, won't boot into recovery mode, only thing it does is show in windows as a load of local disks, and QHSUSB_BULK in device manager with a yellow exclamation mark
I've followed all the advice so far given and none of it worked, i think i'm screwed :/
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
Tried this too, nothing, it won't go into download mode.
I have the same problem, please do tell me if any of you find a solution.
I am seriously stuck
What model you guys have?
wisefreakz said:
What model you guys have?
Click to expand...
Click to collapse
I have D802.
Switched999 said:
I have D802.
Click to expand...
Click to collapse
Same, D802.
I phoned LG on saturday and have decided to send it in for repair, i only need it to keep me going till November then i can get the G4.
Well LG have tajen their sweet time, i won't be getting the envelope to send it back in until monday.
Soooo if i can get this fixed before then i would be very happy!
Does anyone else have any ideas please?
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
I couldn't make the youtube thinggy work lol but here's the link in case you guys wanna know what's going on with my piece of brick lol
https://www.youtube.com/watch?v=xX8_RgSS5x0
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
J0nhy said:
Well my journey started because i wanted to install the latest stock nougat on my device "7.1.1" and i had bad boyz rom installed on my device so the update wasn't showing up so i follow this this THREAD and i downloaded all the tools needed in order to flash my device so when i tried it at first it showed me a bad format error "HERE'S THE PIC" after that error i unpluged my phone off the pc and tried to turn it on but i had no luck and now it's stuck in a black screen and every time i plugged it in to my pc it shows up as qloader 9008 but apparently miflash cannot flash it or any other tooland it says it cannot retrive the hello packet "HERE'S THE PIC", my bootloader was unlocked and the device was also root, i also tried calling their RMA but they didn't do much since my bootloader was unlocked :C
Click to expand...
Click to collapse
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
bkores said:
There are a whole bunch of problems with this version of MiFlash. Try this version: http://xiaomiflashtool.com/download/xiaomi-flash-tool-20160401
Click to expand...
Click to collapse
Thanks man i tried that one too no luck :C
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yes man i tried it but i had no luck :C, thanks
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
J0nhy said:
Yes man i tried it but i had no luck :C, thanks
Click to expand...
Click to collapse
Use this driver
Restart - enter EDL again
Flash "B15-NEW_FULL (Nougat)" (the full one, not the twrp one)
lafester said:
Unzip and flash the file inside. Also you must reboot edl after any failed attempt.
Click to expand...
Click to collapse
Cannot turn off or on my device i cannot not do anything the only thing it does is a sound every time i plug it in to my pc
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
lafester said:
Keep trying. It is hard to tell with the black screen. Just watch device manager to see it reboot.
Click to expand...
Click to collapse
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
tamahouse02 said:
Run into the same problem with "Miflash cannot read helloL". Here the fix:
Flash with the package: the "B15-NEW_FULL (Nougat)"
Still in the thread https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thanks. I kept getting partition type errors. The link you posted kept having network errors and dropping. It wasn't till after midnight pst that I got a stable connection and downloaded the whole thing. It flashed great and my phone is up and running. I was thinking I would have to send my phone in.
J0nhy said:
Hahahahaha got it working mate thanks, so i tried a samsung cable with the adapter and it worked lol thanks mate
Click to expand...
Click to collapse
Yeah that's the kind of errors that suck /real/ bad. Good on you for not giving up. Now you know and you'll help spread the gospel of "keep trying until you can prove that it's actually an issue".
Hello everyone!
To make my problem short I tried to update my LG G6 on Oreo but in the middle of update process phone shut down(I didn't know why-probably battery?) And after that phone is bootlooping and I tried to flash stock rom using uppercut and LGUP but without success I manage to start flash process and when it reaches about 50% phone just reboots and flash tool gives error message. Now phone is bricked. I don't now if there are any solutions. Any help is appreciated! Thank you guys! :fingers-crossed:
Keep on charging..
See some post how to enter in download mode (within fraction of second).. use LGUP and flash PROPER ROM..
(I see it was bootlooping.. that it must be charging)
Huge thanks for your reply, well I manage to get to download mode without problem, PC can detect phone as well and I can start flashing process, however with all firmwares I have found I cannot "refurbish" because "refurbished is not supported by that firmware" so I can only select upgrade in LG up. When I start process it goes all the way up to about 50% and phone just reboots back to download mode, after that LG UP moves a few % further reaching about 55% and gives error " invalid response code". I think if I can somehow use that refurbish option to clean flash stock rom , maybe that will be the fix. Thanks again.
I also forgot to mention that when I failed to install stock room with LG up my phone cannot escape download mode, when I force reboot it phone goes again directly to download mode. Probably because there is no OS installed?
Are you sure to using right firmwares for your model?
Thanks for reply. Pretty sure I did use good firmware I found links here on XDA forums and downloaded "H8710d_00_OPEN_EU_OP_0327.kdz" but if I somehow found .tot file would that make a difference and let me to use that "refurbish" option. Thanks everyone for help, very appreciated!
tot firmware
RayOfDoom said:
Thanks for reply. Pretty sure I did use good firmware I found links here on XDA forums and downloaded "H8710d_00_OPEN_EU_OP_0327.kdz" but if I somehow found .tot file would that make a difference and let me to use that "refurbish" option. Thanks everyone for help, very appreciated!
Click to expand...
Click to collapse
Hi Ray, can you provide me the link of the tot file? I have the same problem
Unfortunately, I think there are no tot files that support refurbish. But after I replaced motherboard regular kdz update flash worked perfectly. I haven't found solution to that problem.
I would suggest you to try your luck if you have unlocked bootloader and try to flash TWRP to get phone back.
I was trying to put the firmware of the v35 google but it was blocked at 11% and now it does not leave the download mode. I tried to flash it but it tells me that the lg v35awm10f dll is invalid
Did you use LGUP? Got more info?
you need to use the proper lgup patched, i was on the same situation, was trying during 4 hours, then finally i could install it, i think while you're on download mode conected to a pc the phone actually is charging the battery because when i could install pie the phone was on 100% battery, so, don't desesperate, i used the lg up of a post in here about how to install korean pie
ZEDECKGR said:
I was trying to put the firmware of the v35 google but it was blocked at 11% and now it does not leave the download mode. I tried to flash it but it tells me that the lg v35awm10f dll is invalid
Click to expand...
Click to collapse
Use this LGUP.
https://www.lanzous.com/i3y5ocd
solve the problem?
------如果你来自中国,可以给你远程看看
I tried downloading that version of LGUP linked but I keep getting virus warning and it won't download. Does anyone have another link?
X-Nemesis said:
I tried downloading that version of LGUP linked but I keep getting virus warning and it won't download. Does anyone have another link?
Click to expand...
Click to collapse
Try this.
https://drive.google.com/file/d/1I5rcPp8AEIhc0FVtdeQWA0LZt0SAq2In/view?usp=sharing
dave71670 said:
Try this.
https://drive.google.com/file/d/1I5rcPp8AEIhc0FVtdeQWA0LZt0SAq2In/view?usp=sharing
Click to expand...
Click to collapse
Thanks, that worked.