Related
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Scarfangs said:
How can i instal him? With kies or odin?
Sent from my GT-I9301I using XDA Free mobile app
Click to expand...
Click to collapse
i installed it with odin
Im from italy dont know but i get some update on the phone 15mb size. I just accept and my phone go of and start to load some instalation after instalation someting about 110 application and then done my phone was one. This is the update or i need to instali with odin?
Sorry for my english
Sent from my GT-I9301I using XDA Free mobile app
Caimarcladev said:
i installed it with odin
Click to expand...
Click to collapse
have some problem with this new firmware camera dont work when you install i have also Luxembourg firmware run on my device i have juste downgrade to I9301IXXUANH1_I9301IPHNANG1_I9301IXXUANF2_HOME and now camera are work normaly
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Hello, please do not say the latest version, because the last version has the camera bug as well.
The last confirmed working version is I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME
I had just downgraded back from installing I9301IXCUANJ6, from the italian region. Hopefully it will avoid useless data wipes for other people :good:
Caimarcladev said:
Hey all
I just downloaded the latest stock firmware I9301IXCUANJ4 and after installation my stock camera app wasn't starting and gave me message "Camera server Error" So in reflashed firmware again and after that same problem occured so i contacted samsung and the already had reports of the bug and they are pulling it back for my region (the Netherlands )
So if any1 want the latest firmware go for the italion version that one is solid and has some battery drain improvement
Click to expand...
Click to collapse
Wich is the latest version? I9301IXCUANJ6 ?
xCoNDex said:
Wich is the latest version? I9301IXCUANJ6 ?
Click to expand...
Click to collapse
depending region from wher you are
spawk said:
depending region from wher you are
Click to expand...
Click to collapse
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
xCoNDex said:
I have been testing all roms stock mentioned on xda forums and no one works, my camera is tottaly dead.....
Click to expand...
Click to collapse
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
xCoNDex said:
Flashed with Nand erased disables, is that ok right?
I purchased my phone on spain, but its from ITA, im gonna test the last rom stock for this region, is the last thing left to prove
Click to expand...
Click to collapse
no flash with nand erased enabled
Again Camera Bug ( Server error)
spawk said:
yesterday i have flashed new firmware and got camera not work i have lanched odine and chek nand errase if uncheked and flashed downgrade old firmware and now camera are work but i have loste all my old setting and apps because errase del all your previous phone and install system from 0 test and you see
Click to expand...
Click to collapse
Hi Spark,
as some other users I have my problems with the Camera Bug. I flashed four in this forum recommended ROMs with wiping each time Cache, System and Internal Storage , and activated Nand Erase before flashing with Odin. But each time the error message appears again.
That somehow drives me crazy. Idon't know wht to do else. Any Idea?
Galaxy S3 Neo
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
does any1 knows if the lates version (I9301IXXUANG1 from open Austria ) also has the camera bug?
cause they say this is the best firmware version with the lowest battery usage
New Phone (for mum ) and I thought lets flash new FW for Germany DBT for it... What the f**k! Camera stop working with this well known Server issue!
Its an GT-I9301I for European Region. Bought in Germany.
This one made the camera working again for me!
I9301IXCUANL1 - CYV - 08.12.2014
http://samsung-updates.com/details/40228/Galaxy_S3_Neoplus/GT-I9301I/CYV/I9301IXCUANL1.html
And this one works also
I9301IXCUAOA1 - PHE - 09 Jan 2015
http://www.sammobile.com/firmwares/download/42204/I9301IXCUAOA1_I9301IPHEAOA1_PHE.zip/
Thanks goodness. Thought I bricked the phone right out of the box
Thanks to this thread for kicking me in the right direction!
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
fraross said:
when you bought the phone had the version XXUAN ... but if flashi firmware XCUAN .... the camera will not work and will fail. If you would like to solve the problem you have to flash the firmware again that had your phone when it was bought
Click to expand...
Click to collapse
that's right. we've got 2 versions with 2 cameras. xc camera and xx camera. this is not a bug. people just flash the appropriate rom for each. don't mix.
If it's not a bug, than why does the official ota flash the wrong update?
putti71 said:
If it's not a bug, than why does the official ota flash the wrong update?
Click to expand...
Click to collapse
Maybe because OTA will flash updates for the current installed firmware. For example if you have got a XCUAN firmware OTA will fash the updated version for XCUAN. if you have got a XXUAN firmware OTA will fash the updated version for XXUAN. if the camera won't work after the update you have to install the correct update manually. You can find firmwares on SAMMOBILE
A friend has an S4 (i9505) from Vodafone Spain (ATL), unlocked and using another operator microSIM (Jazztel). Last week, via OTA, she received the latest update available: http://www.sammobile.com/firmwares/download/59777/I9505XXUHOJ4_I9505VFRHOF3_ATL/
After installing that OTA update, the signal level is very low, even none inside buildings, etc. This was not happening before.
In addition, the 2 soft keys (on both sides of the Home button) are not responding anymore, not even lighting up.
The Home button works, so... I think that it's not a hardware problem. Too much coincidence that the update and that hypothetical hardware problem happened at the same time...
First I did was a total hard reset, to factory settings, etc. No success, both problems (signal and soft keys) were still there.
Second, I flashed ROM manually via Odin. I flashed latest PHE one, so no Vodafone bloatware anymore: http://www.sammobile.com/firmwares/download/59311/I9505XXUHOJ2_I9505YXXHOJ1_PHE/
No success, still the same. I then did again a hard reset to factory setting, with Wipes first... and nothing.
Next thing I will do (when i have the phone in my hands again) is flashing with Odin the previous PHE one, and crossing fingers: http://www.sammobile.com/firmwares/download/48153/I9505XXUHOE3_I9505PHEHOE1_PHE/
Anyone with the same problem? Any solution/suggestion?
Flashed next-to-last Stock ROM for PHE http://www.sammobile.com/firmwares/download/48153/I9505XXUHOE3_I9505PHEHOE1_PHE/ and no success
Then I flashed Base HOH2 (4files+PIT) with Odin and... nothing either.
No idea what to try next. Suggestions?
Same here, after OTA no menu/back buttons (neither backlight or functionality)
Current status:
- seems to affect quite a lot of people, there are more threads like this on various sites
*e.g. here, here, here
- happenning after both OTA or ODIN based update to latest 5.0.1 ROM (for me it was i9505XXUHOJ2)
My findings so far:
- NO rom change seems to fix this
- it seems that touch keys' FW is updated (physically on the chip) along with the update (to version 0x12)
- Touch key FW update in menu *#2663# not applicable as it says that it won't update - versions are the same (you can check the version of driver used by ROM and the actual FW in chip on this page)
NOTE. my girlfriend has the buttons working after successful update and has both in version 0x12
Conclusion:
- It seems that the FW flashing process of the touch keys controllers somehow failed => phone says that it's also ver. 0x12 (same as android driver) but it is probably corrupted
- Re-flashing of the chip could solve the problems, however there are problems with this:
NOTES.
Menu *#2663# won't let us do the flash because of the version check - Can we use ADB to force the update on a rooted phone? Does anybody know how?
There is a slight chance, that it'll be fixed if Samsung will release some newer update which updates also the keys' FW
Samsung could release a fix, that will flash this manually as a lot of people have problem with this
!EDIT:
I've found very similar problem + solution on the Vietnamese forum bellow (don't use the files as it's for different phone!):
- to sum it up - force downgrading the FW, the update again... (any ROM cook that could help?)
see here
regards,
J.
I completely agree with you. I also tried the *#2663# path, the phone also has 0x12 touch keys FW, and it doesn't let me reflash it, either. Don't know what FW was there before the OTA update.
I have been told about the first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/download/44821/I9505XXUHOB7_I9505OXAHOB7_DBT/ and also about the last 4.4.2 one: http://www.sammobile.com/firmwares/download/40046/I9505XXUGNK4_I9505OXAGNK4_DBT/
Maybe one of those... makes something again on the Touch Keys FW?
I couldn't try anymore bcs I gave the phone back to my friend (with accesibility touch keys on-screen)
HI, have you found a solution? My Italian S4 suffered the same bug after the same upgrade. I tried to contact samsung and they said I need to replace the screen because upgrading the firmware put the electronic under stress and they got broken. I don't believe them because too many people have the same problem + my screen is two days old! Please help me!
Same problem for my S4! how we can flash/reflash/downgrade soft touch fw?
Has anyone tried the first first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/d...05OXAHOB7_DBT/ or the last 4.4.2 one: http://www.sammobile.com/firmwares/d...05OXAGNK4_DBT/ ?
A friend of mine (another one) told me that he fixed it with German HOA7 one, and then updated again to latest with no problem: https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I can't try it myself bcs I gave back the S4 to the owner. If anyone tries, please leave here the results!
oiluj said:
Has anyone tried the first first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/d...05OXAHOB7_DBT/ or the last 4.4.2 one: http://www.sammobile.com/firmwares/d...05OXAGNK4_DBT/ ?
A friend of mine (another one) told me that he fixed it with German HOA7 one, and then updated again to latest with no problem: https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I can't try it myself bcs I gave back the S4 to the owner. If anyone tries, please leave here the results!
Click to expand...
Click to collapse
I've tried a lot of ROMs - 4.4.2, also older 5.0.1 with no result...
I haven't tried UHOA7 I've tried UHOB7 instead, so I'll probably give it the shot, but I can't imagine how it could fix this issue (maybe if it for some reason has the touch-cypress FW update forced...)
- I've seen that on some German forums reverting back helped, but it wasn't my case (+it didn't fix the problem for many others...)
As I've wrote before, they've created modified kernel (with forced touch key FW reflash - bypassed version check) for a little bit different phone on the Vietnamese forum (see the link in my previous post) and it seems that it would be quite easy for somebody who has some knowledge with kernel compilation... (it would just need small modification in the "if" condition of 1 kernel source file) I've tried to do some research, but it takes some time to understand the process of building the kernel and to figure out how to properly pack it again... Also the sources are a little bit different for i9505.
kosmodisk said:
I've tried a lot of ROMs - 4.4.2, also older 5.0.1 with no result...
I haven't tried UHOA7 I've tried UHOB7 instead, so I'll probably give it the shot, but I can't imagine how it could fix this issue (maybe if it for some reason has the touch-cypress FW update forced...)
- I've seen that on some German forums reverting back helped, but it wasn't my case (+it didn't fix the problem for many others...)
As I've wrote before, they've created modified kernel (with forced touch key FW reflash - bypassed version check) for a little bit different phone on the Vietnamese forum (see the link in my previous post) and it seems that it would be quite easy for somebody who has some knowledge with kernel compilation... (it would just need small modification in the "if" condition of 1 kernel source file) I've tried to do some research, but it takes some time to understand the process of building the kernel and to figure out how to properly pack it again... Also the sources are a little bit different for i9505.
Click to expand...
Click to collapse
No idea, another friend of mine (different than the one who gave me her "broken" i9505 for fixing), who had the same problem with his own i9505 told me that with the I9505XXUHOA7_OXAHOA7 he fixed it. And sent me the Mega link, as it's not on SamMobile (or I didn't find it): https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I couldn't try it by myself, because I gave back the "broken" i9505 I was trying to fix to her owner before I was told about HOA7.
U know a lot more about this than me. Maybe you can give a try to that HOA7 Mega link, and see if it really works, or if my friend was extremely extremely lucky, and still doesn't know it (and ofc, doesn't know what the hell fixed his phone, and how).
Anyway, if u decide to give a try to the I9505XXUHOA7_OXAHOA7 one, don't forget to come back to tell us if it worked or... nothing. I keep fingers crossed!!!
Oh, and ofc: THANK YOU!!!
oiluj said:
No idea, another friend of mine (different than the one who gave me her "broken" i9505 for fixing), who had the same problem with his own i9505 told me that with the I9505XXUHOA7_OXAHOA7 he fixed it. And sent me the Mega link, as it's not on SamMobile (or I didn't find it): https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I couldn't try it by myself, because I gave back the "broken" i9505 I was trying to fix to her owner before I was told about HOA7.
U know a lot more about this than me. Maybe you can give a try to that HOA7 Mega link, and see if it really works, or if my friend was extremely extremely lucky, and still doesn't know it (and ofc, doesn't know what the hell fixed his phone, and how).
Anyway, if u decide to give a try to the I9505XXUHOA7_OXAHOA7 one, don't forget to come back to tell us if it worked or... nothing. I keep fingers crossed!!!
Oh, and ofc: THANK YOU!!!
Click to expand...
Click to collapse
I got the problem but only the back button was not working. Did factory reset and it did not help.
Then i flashed I9505XXUHOA7_OXAHOA7 from your link with Odin 3.10 and YES!!! i can confirm it is working again So happy now.
It is my Moms Phone now and she loves it!!. I was unly helping her doing the OTA so she realy hated me and SAM for F****** up her phone.
This tread realy saved my ass
Can confirm this is happening to me as well. All firmwares starting from HOF2 seem to have this problem so if you encounter this, downgrading to a HOE/HOD firmware should correct this bug. The downside is that without a proper fix, you won't be able to update.
BUBA0071 said:
I got the problem but only the back button was not working. Did factory reset and it did not help.
Then i flashed I9505XXUHOA7_OXAHOA7 from your link with Odin 3.10 and YES!!! i can confirm it is working again So happy now.
It is my Moms Phone now and she loves it!!. I was unly helping her doing the OTA so she realy hated me and SAM for F****** up her phone.
This tread realy saved my ass
Click to expand...
Click to collapse
@kosmodisk, did u read that? have u tried I9505XXUHOA7_OXAHOA7 by urself? Ur conclusions?
@BUBA0071:
- Did u look before (and after) flashing HOA7 which FW had (and have now) the touch keys? Remember: *#2663#
- After flashing HOA7, did u update again to latest one? Did the update work well this time, and now u have latest version with touch leys working?
MoLoCEL said:
Can confirm this is happening to me as well. All firmwares starting from HOF2 seem to have this problem so if you encounter this, downgrading to a HOE/HOD firmware should correct this bug. The downside is that without a proper fix, you won't be able to update.
Click to expand...
Click to collapse
I tried with a HOE1 one and... didn't work. Couldn't try one even older, but HOE1 seems to keep the same problem.
the file is corrupted when i try to extract it ? any other files that i can try ? im having the same problem right now with my s4.. have been looking for quiet some times now, and this is my only hope, hope this way will works smoothly...
wild081 said:
the file is corrupted when i try to extract it ? any other files that i can try ? im having the same problem right now with my s4.. have been looking for quiet some times now, and this is my only hope, hope this way will works smoothly...
Click to expand...
Click to collapse
download it again
@oiluj
HOE3 works for me. Problems start from HOF onwards.
I have also tried flashing HOA7 DBT and upgrading. Problem persists. My touchkey firmware is 0x1a and won't update no matter what Firmware package I tried. Up to now i have tried: GNG2, GNI2, GNK4, HOA7, HOB7, HOD7.
I'm pretty sure a rom (custom or early kitkat/lollipop leaks) caused this, altough I never flashed the initial chinese leak.
MoLoCEL said:
[MENTION=3170873]I'm pretty sure a rom (custom or early kitkat/lollipop leaks) caused this, altough I never flashed the initial chinese leak.
Click to expand...
Click to collapse
The phone that that girl gave to me, for fixing... was completely in official status. Always official ROMs, and official OTA updates, from first minute. And the problem was caused by latest official OTA update available: http://www.sammobile.com/firmwares/download/59777/I9505XXUHOJ4_I9505VFRHOF3_ATL/
So the problem was not caused by any custom ROM or a not official one.
oiluj said:
@kosmodisk, did u read that? have u tried I9505XXUHOA7_OXAHOA7 by urself? Ur conclusions?
@BUBA0071:
- Did u look before (and after) flashing HOA7 which FW had (and have now) the touch keys? Remember: *#2663#
- After flashing HOA7, did u update again to latest one? Did the update work well this time, and now u have latest version with touch leys working?
I tried with a HOE1 one and... didn't work. Couldn't try one even older, but HOE1 seems to keep the same problem.
Click to expand...
Click to collapse
Hardware key firmware 0X12 parth 0X1a (when it was not working, dont know if it have changed after german firmware flash). I have not updated again, think my CSC is blocking. It stayed on NEE after update to German firmware.
It was NEE I9505XXUPOJ2 firmware that F***** up my Phone
BUBA0071 said:
Hardware key firmware 0X12 parth 0X1a (when it was not working, dont know if it have changed after german firmware flash). I have not updated again, think my CSC is blocking. It stayed on NEE after update to German firmware.
It was NEE I9505XXUPOJ2 firmware that F***** up my Phone
Click to expand...
Click to collapse
unfortunately I've tried I9505XXUHOA7_OXAHOA7 with no luck (even with repartition when flashing) - the buttons still don't respond
BUBA0071, I'd like to ask which custom ROM have you tried? It seems that your keys have FW of version 0x1a which should be newer than 0x12, so this could lead to some sollution. Was it some cyanogen mod or MIUI?
thx
kosmodisk said:
unfortunately I've tried I9505XXUHOA7_OXAHOA7 with no luck (even with repartition when flashing) - the buttons still don't respond
BUBA0071, I'd like to ask which custom ROM have you tried? It seems that your keys have FW of version 0x1a which should be newer than 0x12, so this could lead to some sollution. Was it some cyanogen mod or MIUI?
thx
Click to expand...
Click to collapse
Wups it have been some time since it was custum, but in any cace it must have been some of the first lollipop roms. I gave to my mom 13 feb 2015 and i did a lot of flashing before that, i think one of the roms i tryed was Project Chaos. but also i tryed all the google editition roms for i9505 and cyanogen.
but when it whent back to stock it i used PDA I9505XXUHOD7 CSC I9505NEEHOD2 NEE firmware
I've got a question. When you flash the HOA7 file from the Mega link, do you use only the AP file, or you use AP,BL,CP, CSC and PIT files?
I'm gonna try to fix my S4 but i'm not sure about the right process I should follow.
Thank you!
Firmware Details
Device: Huawei Honor 6 Plus
Model: Pine-TL10
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B334
Build: PE-TL10C900B334
Code: 05012WEU
Status: Official (stable)
Region: Europe
Country: Russia
Type: Full firmware image
Release Date: 22.12.2015
File Name: PE-TL10_C900B334_Firmware_Russian Federation_Channel-Others_Android 5.1.1_EMUI 3.1_05012WEU.zip
Link
How to Install
As far as this firmware’s compatibility is concerned, you can install it over a wide range of builds that carry C900 market number.
Download “PE-TL10_C900B334_Firmware….05012WEU.zip” from the aforementioned link and extract it.
Copy the extracted ‘dload’ folder to the top directory level of your phone’s external microSD card.
Disconnect the USB cable and open Updater app.
Tap menu > Local Update. Choose the full Update.app package and flash it.
Alternatively, simply reboot the device while holding Vol up + Vol down + Power simultaneously after the copying ‘dload’.
@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?
PeKeT said:
@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?
Click to expand...
Click to collapse
I do not have to test the device, obviously there is something new
Has anyone tried the new ROM the B334? I can say that changes have? thanks.
All Problem Solved
i have just finished updating now to this rom and as far as i check all problem in previous lolliopop rom are solved now (DT2W, choose which sim work as 3G or 4G, Gloves mode and all motion options are back) now i can enjoy lollipop till android M :laugh::laugh::laugh:
Perfect
i installed but i missed touch plus
Nobody can answer my question? Which brings changes in this new version B324 B334? someone can tell me the changes one by one? Thanks and sorry for bothering me should know that there are changes
I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL00
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.
ykun said:
I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL100
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.
Click to expand...
Click to collapse
The firmware is for this model:
Device: Huawei Honor 6 Plus
Model: Pine-TL10
Nice, where did you find this ROM?
carlthedroid said:
Nice, where did you find this ROM?
Click to expand...
Click to collapse
in certain Web sites:good:
linus2014 said:
in certain Web sites:good:
Click to expand...
Click to collapse
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125
XDADEVX said:
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125
Click to expand...
Click to collapse
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
yes it does corresponds
EDIT : cannot flash .. straight it will fail..
Edit 2 : I need B324 first ...
linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..
XDADEVX said:
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..
Click to expand...
Click to collapse
you must to have at least lollipop 5.1.1, do not know more.
linus2014 said:
you must to have at least lollipop 5.1.1, do not know more.
Click to expand...
Click to collapse
yes i said i have now 324
PeKeT said:
Has anyone tried the new ROM the B334? I can say that changes have? thanks.
Click to expand...
Click to collapse
Installed without Problem on My PE TL10
Changelog :
- motion control is back
- new bootanimation (red H)
- minor fixes ?
Hey guys,
I bought a second hand Note 3 this week. AWESOME phone, but there's one problem....absolutely none of the sensors work!! :crying: I checked with *#0*#, and when I click on "sensors", they are ALL frozen. Does anyone have any idea what I can try do??
Running Android 5.0
Model no: SM-N900
Things I've already tried:
1) Factory reset
2) Updating firmware (now 5.0)
3) Taking battery out while in ODIN mode
Any help will be GREATLY appreciated!!!
Reads as hardware to me .
When I go to *#2663# and try updatethe Sensorhub FW - it fails. I'm guessing it's the Sensorhub that is broken as none of the sensors are being detected. Does anyone have any experience with repairing this? Or maybe forcing a FW update that might "wake it up"?
Google ?
Sent from my Note 3 running Purify CM13
Dejan Sathanas said:
Google ?
Sent from my Note 3 running Purify CM13
Click to expand...
Click to collapse
I've spent 3 days googling
Did you try to use another kernel? I have smilar problem . Try use same other kernel and let me know if this help you
lipa12345 said:
Did you try to use another kernel? I have smilar problem . Try use same other kernel and let me know if this help you
Click to expand...
Click to collapse
I haven't yet - I'm going to try today. Which ROM are you currently using? If you go to SensorHub Test via *#0*#, does it fail?
Also, what is your baseband number?
Currently i use phonesis rom v 6.5 note 5 port and idlekernel but i think i will change it soon becouse i have stragne problem that application turn of by themself For example i use kernel adiutor and i set value from 2200 to 2700 and after 3 minutes is back again yo 2200 and the same with normal application. But return to your problem my modem is
N9005XXUGBOK4. And t test with *#0#* is ok, i dont have this problem with sensor anymore i have IT on another rom on on arter97 kernel for note 3 promixty sensor not working i have changet it for another and work fine.
Guit4eva said:
I haven't yet - I'm going to try today. Which ROM are you currently using? If you go to SensorHub Test via *#0*#, does it fail?
Click to expand...
Click to collapse
Did you fixed it with another kernel, please reply.
Merkor said:
Did you fixed it with another kernel, please reply.
Click to expand...
Click to collapse
Hey there Merkor,
I haven't tried yet - I'm still trying to figure out how to root and install a custom ROM. Are you experiencing the same problem with your Note 3? If you go to *#0*#, then SensorHub Test, what does it show as your MCU and Bin FW versions?
MCU Firm Version: ST0115041500
Bin Firm Version: ST0199999
FAIL
:/
Merkor said:
MCU Firm Version: ST0115041500
Bin Firm Version: ST0199999
FAIL
:/
Click to expand...
Click to collapse
That's how mine shows as well. What is your exact build number? On other threads I've read, people who have working Sensor Hubs have matching MCU and Bin FW numbers. Odd that ours are different. When did you upgrade to Lollipop - and when were your sensors last working?
When you go to *#0*# and then SensorHub Test, what does your MCU name say?
Yes another kernel fixed my problem . Did you try to use other kernel yet ?
lipa12345 said:
Yes another kernel fixed my problem . Did you try to use other kernel yet ?
Click to expand...
Click to collapse
Which kernel did you try? Do you have the N9005 or the N900 version?
N9005 which kernel it depending ona what Ron i currently have. Now i have note 5 port kernel idlekernel 7.0.1
@lipa12345 I installed IdleKernel 7.0.1 and all sensors still frozen, it's possible to upgrade or maybe downgrade MCU Firm Version and/or Bin Firm Version?
I tried to root my LG f800s and install WETA Rom , now my phone does not boot and I can only access download mode. LGUP reads it as H918 and gives KDZ error H918 > F800s. I also tried to flash through flashtool 2016 but it does not read my phone at all. Please Help me
Help please
I am sure there might be somone who had similar problem but no one is coming up, any dev please have your say.
Dear Mohamed
i know you asked from a very long time , but did you find any solution to your problem . please share with us here if you do not mind
Samer Mohamed
sam_pon said:
Dear Mohamed
i know you asked from a very long time , but did you find any solution to your problem . please share with us here if you do not mind
Samer Mohamed
Click to expand...
Click to collapse
You can resolve it by using a patched version of LG UP which lets us flash kdz files for different variants on our LG v20, I once used it to flash H918 on my F800L variant.?
Run an internet search for the software
0x0null said:
You can resolve it by using a patched version of LG UP which lets us flash kdz files for different variants on our LG v20, I once used it to flash H918 on my F800L variant.
Run an internet search for the software
Click to expand...
Click to collapse
Thanks dear brother for your reply but i tried the patched version here
https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
without any success , and always stopped at the beginning of flashing
could you please help me by sending a link for the patched version you have , or if you uploaded it on any web site you will do a big favor for me and i will be thankful for you too too much
sam_pon said:
Thanks dear brother for your reply but i tried the patched version here
https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
without any success , and always stopped at the beginning of flashing
could you please help me by sending a link for the patched version you have , or if you uploaded it on any web site you will do a big favor for me and i will be thankful for you too too much
Click to expand...
Click to collapse
to actually bypass the model check use partition dl mode (and check all the boxes). just don't flash h918 firmware on anything not an h918 or vice versa -brick.
sam_pon said:
Thanks dear brother for your reply but i tried the patched version here
https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
without any success , and always stopped at the beginning of flashing
could you please help me by sending a link for the patched version you have , or if you uploaded it on any web site you will do a big favor for me and i will be thankful for you too too much
Click to expand...
Click to collapse
Use the 'partition DL' option then thick all partitions on the popup option then flash.
0x0null said:
Use the 'partition DL' option then thick all partitions on the popup option then flash.
Click to expand...
Click to collapse
I tried it many times but every time it stopped at flashing ( lafback ) , i tried to not tick that partition , but it stopped at the next partition ( system ) , so i made the root without changing the model and flashed weta rom for vs995 and it is working but the problem now is the FM Radio not activated , actually it was not activated at the original rom for Korea ( F800S ) but many people said that the fm chip is disabled by the carrier and if we change the carrier it will work , but i think they are totally wrong about that and i think the FM will not working on that model .
i95swervin said:
You need the patched lg up. This gets around the model mismatch issue. Flash a kdz for your model
Click to expand...
Click to collapse
could you please refer to a link for that patched LG UP , because i really failed to make any success at that .
sam_pon said:
I tried it many times but every time it stopped at flashing ( lafback ) , i tried to not tick that partition , but it stopped at the next partition ( system ) , so i made the root without changing the model and flashed weta rom for vs995 and it is working but the problem now is the FM Radio not activated , actually it was not activated at the original rom for Korea ( F800S ) but many people said that the fm chip is disabled by the carrier and if we change the carrier it will work , but i think they are totally wrong about that and i think the FM will not working on that model .
could you please refer to a link for that patched LG UP , because i really failed to make any success at that .
Click to expand...
Click to collapse
Dirty santa root method disables FM radio
Heres a link to the patched LG UP tool
https://forum.xda-developers.com/v2...k-features-t3652222/post73304171#post73304171
Attachment added
0x0null said:
Dirty santa root method disables FM radio
Heres a link to the patched LG UP tool
https://forum.xda-developers.com/v2...k-features-t3652222/post73304171#post73304171
Attachment added
Click to expand...
Click to collapse
Really Man , you are talking serious , it means if i could flash my mobile with H910 ( for example ) official rom maybe the FM radio will work,
it will be very nice if it is happening ,
i will give it another try and try and try
thanks a lot my friend
sam_pon said:
Really Man , you are talking serious , it means if i could flash my mobile with H910 ( for example ) official rom maybe the FM radio will work,
it will be very nice if it is happening ,
i will give it another try and try and try
thanks a lot my friend
Click to expand...
Click to collapse
Fm radio is hardware dependant
Sent from my LG-H910 using XDA Labs
is your infrared remote working? i think is same like the radio..
cnjax said:
Fm radio is hardware dependant
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
i know my brother it is a hardware , but i was confused about this point exactly because many expert people said it is inside the cpu now and not a separate hardware ,
so i think you are right and it must be a separate hardware to make the FM Radio working .
paul999 said:
is your infrared remote working? i think is same like the radio..
Click to expand...
Click to collapse
really i did not check if it has infrared or not
i think you mean that the motherboard is totally different .
i95swervin said:
Thread link
http://bfy.tw/LbLV
Click to expand...
Click to collapse
thanks a lot dear brother for the link i will try it and hope to success in this challenge .