Database Users

[OTA][5.0.2] Moto G 2ª Gen. XT1068 Lollipop 5.0.2

(Warning: this will erase everything that is on the device, including in internal memory, save your stuff on the computer before doing this).
Download:
- Drive1 - Drive2
Download the required file and copy the OTA to the device's internal memory.
Now the device, go to Settings> About Phone> System Updates.
Will the message of a new update found. Just confirm and start the update.
The device will reboot and start the update process, just wait for the process to finish.
When finished, the device will restart and voila, you are using the final version of Lollipop 5.0.2
*
Obs .: advise after making the upgrade to Lollipop, go Configure> Backup and Reset> Restore Factory Data and confirm. So you can avoid getting bugs or possible traces of KitKat files.
Via MotoForum
OTA captured by Joao Paulo

Obrigado parceiro, todos ops dias eu visito as comunidades a procura deste OTA
obrigado por disponibilizar

accidentally wiped /system on TA-1021 Germany

Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance

ZeroPointMax said:
Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance
Click to expand...
Click to collapse
Hello zio!! keep calm and have a long breath!!
Flash this with ost:
http://https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM.
Don't tap edit phone information but just flash!! the security patches are from july!!
if you have a bad flash try to wipe from settings => restore
Stay away from rooting process until nokia releases the dedicated tools, capisce!!
NON FARTI MALE

Link don't work

wachiwachi said:
Link don't work
Click to expand...
Click to collapse
try now zio

Yes, now downloading But, what's model ROM is this?? For TA-1021?
---------- Post added at 05:30 PM ---------- Previous post was at 05:27 PM ----------
Ok, is for TA-1025 MENA.

wachiwachi said:
Yes, now downloading But, what's model ROM is this?? For TA-1021?
Click to expand...
Click to collapse
What i told you 1 minute ago? keep calm!!! i have myself a nokia 6 and i'ts a 1021. this rom is for that version!
i've flashed this rom and my nokia is still alive.
The most important thing is boot the phone in download mode, i'ts half of work

[solved]
I solved it this way: i downloaded the patched OST from here: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441.
The ZIP of canaop92 did not work for my phone (see EDIT), but gave me a nb0 file for the following
I clicked "edit Device Information" in OST, DO NOT CLICK ON 'NEXT' after that
This installs a functional fastboot onto the device.
The method of canapo92 did not work, explained in my EDIT. So I had to improvise: I downloaded (after an hour of searching for that) a full firmware of the Nokia 6 TA-1021 and mirrored it:
https://drive.google.com/file/d/1kCKSid5Bf89yA3DyX8Y2gAZHq4VK6_p6/view?usp=sharing
https://c.web.de/@337613479567432195/P_ZJsw0bRtiH-KwIPvbjeA
https://1drv.ms/u/s!Agmh3wcexsuyjWysvmeASmEW66ah
https://nextcloud.hobbyist-overclock.de/index.php/s/RX7SxFQcLF7Pj9B
(download one of the mirrors)
Then I 'fastboot flash'ed the following .img files to the device: boot, cache, cda, hidden, mdtp, misc, persist, recovery, splash, system and userdata
That was it - everything working again
Thanks canapo92 for the Help and the original download link
EDIT: the flash without edit phone information did not work, my phone rebooted itself into recovery... weird... so i experimented. I tried to repeat the process with Android working again and now it wiorks

ZeroPointMax said:
I solved it this way: i downloaded the patched OST from here: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441.
The ZIP of canaop92 did not work for my phone (see EDIT), but gave me a nb0 file for the following
I clicked "edit Device Information" in OST, DO NOT CLICK ON 'NEXT' after that
This installs a functional fastboot onto the device.
The method of canapo92 did not work, explained in my EDIT. So I had to improvise: I downloaded (after an hour of searching for that) a full firmware of the Nokia 6 TA-1021 and mirrored it:
https://drive.google.com/file/d/1kCKSid5Bf89yA3DyX8Y2gAZHq4VK6_p6/view?usp=sharing
https://c.web.de/@337613479567432195/P_ZJsw0bRtiH-KwIPvbjeA
https://1drv.ms/u/s!Agmh3wcexsuyjWysvmeASmEW66ah
https://nextcloud.hobbyist-overclock.de/index.php/s/xY0KpnFz0krBXmF
(download one of the mirrors)
Then I 'fastboot flash'ed the following .img files to the device: boot, cache, cda, hidden, mdtp, misc, persist, recovery, splash, system and userdata
That was it - everything working again
Thanks canapo92 for the Help and the original download link
EDIT: the flash without edit phone information did not work, my phone rebooted itself into recovery... weird... so i experimented. I tried to repeat the process with Android working again and now it wiorks
Click to expand...
Click to collapse
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.

wachiwachi said:
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.
Click to expand...
Click to collapse
Look buddy, when you bought your, at that time if your phone showed up TA-1025 then after flashing it will show you 1025, if it was TA-1021 then it will show you 1021.
You dont have to check the build.prop file, as every nokia 6 TA-1021 shows TA-1025 into its build.prop file
Flash your phone with MENA firmware, it will flash your phone to 1021 or 1025 with june security patch update
Then apply all updates till December
Everything you can find from here https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Follow all the steps care fully
If you want to update to oreo then
Sign up with beta labs from here https://www.nokia.com/en_int/phones/betalabs
And check if your phone gets the oreo update or not
If not then follow this thread for manually update to oreo https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Remember OTA will require wifi connection to get into your phone
Also be calm and read every step carefully, this will take you to least chance to get stuck into any problems.
Press thanks button if you find this helpful
Happy flashing

sltushar said:
Look buddy, when you bought your, at that time if your phone showed up TA-1025 then after flashing it will show you 1025, if it was TA-1021 then it will show you 1021.
You dont have to check the build.prop file, as every nokia 6 TA-1021 shows TA-1025 into its build.prop file
Flash your phone with MENA firmware, it will flash your phone to 1021 or 1025 with june security patch update
Then apply all updates till December
Everything you can find from here https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Follow all the steps care fully
If you want to update to oreo then
Sign up with beta labs from here https://www.nokia.com/en_int/phones/betalabs
And check if your phone gets the oreo update or not
If not then follow this thread for manually update to oreo https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Remember OTA will require wifi connection to get into your phone
Also be calm and read every step carefully, this will take you to least chance to get stuck into any problems.
Press thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Thanks mate, but I have not explained myself well. My phone is a original TA-1000. I have flashed it following the thread of the MENA firmware and then it shows that it is a TA-1025, up to there everything is correct because he only downloads all the OTAs until December, 7.1.2 included. The fact is that I wanted to flash it to TA-1021 to see if I can solve the problem of the horrible sound in calls and that's why I tried to flash this ROM of TA-1021.

wachiwachi said:
Thanks mate, but I have not explained myself well. My phone is a original TA-1000. I have flashed it following the thread of the MENA firmware and then it shows that it is a TA-1025, up to there everything is correct because he only downloads all the OTAs until December, 7.1.2 included. The fact is that I wanted to flash it to TA-1021 to see if I can solve the problem of the horrible sound in calls and that's why I tried to flash this ROM of TA-1021.
Click to expand...
Click to collapse
Then i would like to tell you that, there is no firmware which is made for TA-1021, the varient varries from region to region
If you phone 1021 then it wont change to 1025 and if it 1025 then it wont change to 1021, may be it is the reason that you get device name as unknown right
The mena firmware is an international varient...
Well i would like to suggest you, that if you want the features then u might go with mena firmware and if you want to fix these then i would suggest you flash back the chinese varient and wait for developers to develop a good custom rom for all users...
Till stay relaxed, and if i will get any fix for it then i would surely share those methods..
Hit thanks button if you find this helpful
Happy flashing

Guide me
wachiwachi said:
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.
Click to expand...
Click to collapse
Can you guide me how to install above firmware on my nokia 6 ta 1021 running oreo , i want to get back to nougat.I downloaded above firmware Nokia_TA-1021_00WW__PLE__600WW but not able to find a way to install it.Please let me know how to install on my phone. Cant install through OST tool as it asking for .nbo file which is not present in above firmware.

ZeroPointMax said:
Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance
Click to expand...
Click to collapse
https://firmwarefile.com/nokia-6-ta-1021
I didn't used personally, please use it with your own risk
Just I got it while surfing internet.

Big Problem with my TA-1033
Hey,
Okay, so firstly sorry for my bad english i'm french ^^
I have a TA-1033 , i can't boot in recovery , i can't boot in my android system just in "Download Mode" , and when i try to restore with OST LA , it don't works , OST LA give me this error : "SE_ERR_ADB_CMD_GET_FAIL_RESULT"
If someone can help me because i'm so scary :crying::crying:

Aventurepix said:
Hey,
Okay, so firstly sorry for my bad english i'm french ^^
I have a TA-1033 , i can't boot in recovery , i can't boot in my android system just in "Download Mode" , and when i try to restore with OST LA , it don't works , OST LA give me this error : "SE_ERR_ADB_CMD_GET_FAIL_RESULT"
If someone can help me because i'm so scary :crying::crying:
Click to expand...
Click to collapse
Okay, your friend told me that you have gained recovery access again. Please do not worry, we can rescue your phone.
First, you have to do Step 1 and 2 of this guide: https://forum.xda-developers.com/nokia-6/how-to/guide-upgrade-downgrade-nougat-oreo-t3752393 but you have to use a firmware file that matches your first letters of your phone's serial number (codename) like PLE or D1C. Using the firmware from other phones can cause unexpected issues but it should boot. Reboot you phone, it won't boot there but that is normal. Apply the OST BL patch again and then you can proceed with 'fastboot flash'-ing the full Nougat firmware or try the homebrew firmware from @hikari_calyx

ZeroPointMax said:
Okay, your friend told me that you have gained recovery access again. Please do not worry, we can rescue your phone.
First, you have to do Step 1 and 2 of this guide: https://forum.xda-developers.com/nokia-6/how-to/guide-upgrade-downgrade-nougat-oreo-t3752393 but you have to use a firmware file that matches your first letters of your phone's serial number (codename) like PLE or D1C. Using the firmware from other phones can cause unexpected issues but it should boot. Reboot you phone, it won't boot there but that is normal. Apply the OST BL patch again and then you can proceed with 'fastboot flash'-ing the full Nougat firmware or try the homebrew firmware from @hikari_calyx
Click to expand...
Click to collapse
All is good , in the recovery , i've used a nougat firmware , and now i'm on android 8.1 , thx (Sorry for my bad english , i'm french)

Nokia ta1021 loop
Ciao ragazzi, ho un nokia 6 1021 che non si accende, va solo in recovery e bootloader, stavo provando questa guida ma ad un certo punto mi blocco, vorrei sapere come devo fare per installare correttamente il firmware? Ho già installato la recovery di nougat ma poi quando installo il firmware tramite ost anche se va a buonfine ritorna alla schermata di boot e poi in recovery.. Non so come fare:crying:

(recovery) ZtE BlAdE L110 dual (working)

Yes and Hello,
to keep things simple made a working CtR 6 recovery for the zte blade l110 on speadtrum basis
ok, simple two easy flashable .img files,
-one the ctr 6 custom touch recovery
DOWNLOAD:
https://www1.zippyshare.com/v/kXBfDA43/file.html
plus if you feel like a recovery filemanager just put it on sdcard or userdata
https://www115.zippyshare.com/v/aV9LR32z/file.html
- second the backup of stock original recovery in case of whatever caused it not to work
DOWNLOAD:
http://s000.tinyupload.com/?file_id=87966360478211256638
easy usable .img files flashable via
fastboot,
recovery?,
shell dd if=/root/recovery.img of=/dev/block/mmcblk0p22
just in case here are the classic toold adb,fastboot...
http://s000.tinyupload.com/?file_id=00162299023334251441
questions or other? thx to the original recovery compiler and coder , just was adding the blade l110 custom parts
btw still maybe doing small changes and soon upload a even little bit better scnd. version
have fun, leave comments

I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?

zte blade l110 recovery
take a look now try and tell me things ok found a good host i hope
g2zer0 said:
I'm very interested in testing it.
Did you already find host?
How about zippyshare.com?
Click to expand...
Click to collapse

Just flashed it with flashify and it works perfect.
Big thx to you!

Reupload pls

fenerbuuh said:
Reupload pls
Click to expand...
Click to collapse
give it another try should be working now a little time

i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/

eduardvi995 said:
i flashed the recovery.img file inside the zip through fastboot, didn't work. Then i flashed through terminal with the given command and didn't work either. When i reboot to recovery after the flash, the screen remains black and boots normal. Please upload to zippyshare the backup, as the previous link is broken :/
Click to expand...
Click to collapse
Oh
I forgot to mention something REALLY important that i didn't notice. :silly:
I flashed your custom recovery for the SINGLE sim Zte Blade l110 version. And this is for the DUAL sim version.I realize it was my mistake, thanks anyway for the effort. :fingers-crossed:
So everyone be AWARE that this recovery won't work with SINGLE sim version.

hi, do i need to unlock bootloader to flash this recovery?

Kabdii said:
hi, do i need to unlock bootloader to flash this recovery?
Click to expand...
Click to collapse
this oem has the bootloader unlocked. all what you would need to do is root it in order to flash anything. (or you could just flash through fastboot).

grazie
salve potete rimettere il link secondo il backup del recupero originale di stock in caso di qualunque cosa gli abbia impedito di funzionare

Oreo On NXT-L09 and L29

Install oreo AL10 chinese version on Mate 8 L09
1. You have to be in nougat, install the rollback to marshmallow creating on your MicroSD a folder named dload and inside this folder put the UPDATE.app, install with the 3 button combo or from the engineers menu, the change from l09 or 29 to al10 is only secure from android marshmallow..
2. Install the rom B100 with the 3 button combo, if you have an unlocked bootloader it will relock, you must have to unlock the bootloader many times here (2 or 3)..
3. After the reboot on the dload folder put the rom NXT-C00B129SP02, unzip this on dload and at the root of the sd put the OemInfo-all_cn.zip.
4. Now you have marshmallow with the NXT-C00B129SP02... flash TWRP via fastboot i will upload all this files.
5. Start the TWRP and flash OemInfo-all_cn.zip
6. Restart the phone on bootloader, flash the stock recovery, restart from adb (fastboot reboot) and when the screen turns black press the up and down volume buttoms to flash the dload... dont let the phone boot winouth installing the dload.
7. Now afther installing this you must be booting on marshmallow chinese version, some times this will take some time to boot, always leave it, if you wish you can update to 8 via ota but you probably aren't gonna have imei or signal, on your sd create a folder named B596 there you have to put HuRUpdater_0.4.zip and update.zip from B596 (everything uploaded in the pack).
8. Now flash TWRP marshmallow again, install the HuRUpdater_0.4.zip in B596 ( when the phone vibrates press the volume down button to install ), when it's ready reboot the phone.
9. Now you have Nougat chinese version ( no signal yet ), on your sd create a folder named B834 ( i will upload everything just to copy and paste) and there you will have the HuRUpdater_0.4.zip and update.zip... update_data_public.zip files..
10. InstallTWRP Nougat and flash the HuRUpdater_0.4.zip.
Now reboot the phone and wait, this will take time but it starts..
L29 To al 10:
You must check on Firmware Finder if your phone accepts the Oreo update.
1. Downgrade to Emui 4.0 any version..
2. With SRK tools change oeminfo y custom.bin to AL10. (You must have unlocked bootloader and root)
3. Download the NXT-AL10C00B172 rom and install with the 3 button combo.
4. Now you will have marshmallow with no signal.
5. Conectar to WiFi and update via ota to the last version, it will be 4 or more, install all versions
6. You will finish with B596
7. With B596 install Firmware Finder y search for this rom (NXT-AL10C17B828 (8.0.0.828), FF-No.: 152726) (Install it via Proxy).
8. Now you have Oreo B829 winouth signal.
9. Flash your cust ( from your region) via Fastboot with "fastboot flash cust cust.img"
9. Wipe everything (factory reset) and booting first time deactivate the updater, if you dont maybe there will be a permanent menssaje)
If you want open kirin!!
Flash via adb this command
fastboot flash system <name-of-rom-image-file>
Install TWRP Oreo, open TWRP, change language to english and search for the option fix encription, swipe to install the script and wipe data, all here on TWRP, now reboot to system and leave it boot, i have my NXT L09 from Colombia, running Oreo 8.1.0 with Openkirin Resurrection Remix OS, sorry for my bad english and i accept comments...
Link with everything for L09:
http://www.mediafire.com/file/eherlv3ht9xocg0/Files.rar
Link with everything for L29:
https://mega.nz/#F!L9RlXSiJ!BZ8Lzu5f0G3QvTYHLDrVNA

Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
An explanation from numeral 6, I hope in Spanish I am from Colombia, friend thanks for mate 8 nxt-L09 I do not understand what the boot manager among others

juanchos650 said:
Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
Click to expand...
Click to collapse
https://www.htcmania.com/showthread.php?t=1441276

Can you upload other screenshots? Of the three it only opens first

are there any major bugs you found on openkirin?

Phone Model "Unknown"
Hey thanks for the sweet tutorial. Amazingly simple but worked so well unlike some others I have seen. Bricked my Mate 8 so many times I still skeptical of the fact that I am actually on Oreo. Thanks dude.
I just have one problem though. My phone model says unknown in the about screen. How can this be rectified? Really hoping you can assist.

Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?

nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img

E_N_Y said:
Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?
Click to expand...
Click to collapse
Sorry for this time, I wish I could help you today, you can change the al10 to l09, search about it, the you can install any l09 rom or go back to al10

rophiroth said:
nobody will share his experience about this rom on l09? Stability? Bugs?​
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img
Click to expand...
Click to collapse
Thank you for your help! I forgot to explain that, I can say this about the rom, 5 months using it, really good, I think the charge is fast than stock, I thing, never metered, no bugs at all, very functional.. :laugh:

No bugs at all? I'm full of graphic bugs when using split or multiple window...

Can someone explain why we even get signal? in the tutorial since the debranding on all AL10 roms there is no sim detection, and when it comes to HuRUpdate the oreo stock al10 rom it works... The rom has some modifications?

L29 download link not work

What is the latest version of oreo (before patches01-02)? and which of the 5 files should I put, I always have in the system compilation
update.zip
update_full_NXT-AL10_all_cn.zip
update_full_NXT-TL00_cmcc_cn.zip
update_full_NXT-DL00_dualcu_cn.zip
update_data_full_public.zip
update_full_NXT-CL00_telecom_cn.zip

"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?

ngg71 said:
"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?
Click to expand...
Click to collapse
Search play store apk on Google, it is the first result, install it and go.

Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.

ngg71 said:
Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.
Click to expand...
Click to collapse
it's the same process, but vice versa ...
https://m.facebook.com/story/graphq...wMDAwMDgwNjQ0MjU0MTpWSzo4OTIxMDg3OTc2NTA3NjU=

So anyone bugless?? I only upgrade to oreo without bug with another method... that don't have network available :'c... I dont know how to have both at the same time

For Signal Fix No need to flash your region cust follow these steps.
1.open any root explorer
2.goto /cust/all/cn/prop and rename local.prop to local.prop.bak
3.restart and wait for 10 seconds
I know its ugly but it works and you won't lose updater too.

Motorola Moto E4 XT1766 ULOCK BOOTLOADER AND ROOT INFO

I ran into a bunch of issues trying to root my moto e4 xt1766 because there does not seem to be alot of info on the rooting of this model of phone.
1 research how to unlock the bootloader this part is documented and not hard through the motorola website.
2 you will need custom TWRP installed. i tried a million of them and finally got one to work and this was one of the hardest parts. once you download it you will need to research how to "sideload" with your abd and install the twrp that way, it may give you an error but even though mine gave me an error it still loaded.
i used twrp-perry-3.1.1-r3.img version. i think i got it here:
https://devfiles.co/download/67ponuqh/twrp-perry-3.1.1-r3.img
3 after you reboot into your phone then either fastboot to bootloader or do a recovery boot. look up how its easy.
boot into your twrp and install the latest version of no-verity-opt-encrypt.zip it easy to find.
4 you will need to dowload a stock boot image to your phone. this is the one i used. i did notice the download came with an already patched boot and recovery image although i was going try them i did not and i may just save you a few steps.
https://androidfilehost.com/?fid=11410963190603854444
5 then download the latest magisk apk and install. you will want to choose to install it to the stock boot image you downloaded to your phone.
6 fast boot to bootloader or boot into recovery to your twrp and choose to install the "patched_boot.img" you made with the magisk.
that is what worked for me... spent days on it so i hope this helps anyone else.

Your thread title says xt1766, but your post reads 1776.
Is it the Sprint version? If so, there are plenty of instructions here. They are way simpler than you seem to have made it.
All you need is an external SD card, a TWRP.img (easily flashed with fastboot) and magisk zip, not APK.
Fastboot flash (or boot if you like) TWRP.img
Format data (by selecting format and type yes)
Reboot recovery, then flash magisk v18. Done.
But glad to see you got worked out. Enjoy your rooted e4.
https://forum.xda-developers.com/moto-e4/how-to/moto-e-guide-to-rooting-t3652982/post73323507
Those are the instructions, but you shouldn't need a no verity zip anymore since magisk v18 handles that for us now

madbat99 said:
Your thread title says xt1766, but your post reads 1776.
Is it the Sprint version? If so, there are plenty of instructions here. They are way simpler than you seem to have made it.
All you need is an external SD card, a TWRP.img (easily flashed with fastboot) and magisk zip, not APK.
Fastboot flash (or boot if you like) TWRP.img
Format data (by selecting format and type yes)
Reboot recovery, then flash magisk v18. Done.
But glad to see you got worked out. Enjoy your rooted e4.
https://forum.xda-developers.com/moto-e4/how-to/moto-e-guide-to-rooting-t3652982/post73323507
Those are the instructions, but you shouldn't need a no verity zip anymore since magisk v18 handles that for us now
Click to expand...
Click to collapse
thank you i corrected it. its a xt1766 easy typo.
i tried all of what you just posted and its not for the xt1766 or at least my phone. if you have a link to a sprint xt1766 unlock and root i would like to see it. i have seen many and none of them worked. none of the twrp images would flash to my device. the only one that worked for me is the one i stated. please post one if you got it.

fadestyle said:
thank you i corrected it. its a xt1766 easy typo.
i tried all of what you just posted and its not for the xt1766 or at least my phone. if you have a link to a sprint xt1766 unlock and root i would like to see it. i have seen many and none of them worked. none of the twrp images would flash to my device. the only one that worked for me is the one i stated. please post one if you got it.
Click to expand...
Click to collapse
Bro, squid2's TWRP is THE one for the Sprint version. He made the original trees and TWRP for the e4. The newer one in his link is prepped for 64 bit support when he remakes new trees. The older one works great too though. Maybe because you flashed one from another source, it's giving you problems.
Those instructions I linked are specifically for the Qualcomm e4 (which includes the xt1766)
You can flash a new TWRP with flashify, or within TWRP. Just select "install image" then navigate to the twrp.img stored on your device, select the partition to flash (recovery) and swipe.
I've never seen the source you linked. And there didn't appear to be a source or trees mentioned on the page so I would be hesitant to use it.
There are a couple of telegram groups for the E4 with a great bunch of guys building ROMs as well. As long as you're using the device on the intended cdma carrier (Sprint, Boost, Virgin, etc.) They work great. There is also a stock rooted, TWRP flashable, build in the forum now.
The link I posted is the right one. I wouldn't use any other TWRP unless it was posted by the guys here deving for it. But of course, to each his own. The one you used may well be a copy of one posted here.
Keep in mind, the links in the the root thread I linked may be outdated (magisk for sure, and no longer need no verity).
So definitely use newer versions of anything listed

thanks

hay alguien por aquí que me pueda ayudar??
ya desbloquee el arranque desde la pagina de oficial de motorola pero ala hora de instalar el twrp me dice fallo ya pobre con muchos archivos img. perry varias versiones y no me carga ala hora de poner flahs recovery recovery.img me dice error ya instale varios drivers de mo motorola porque pensaba que si era eso y nada cabe mencionar que cuando en la ventana de comandos escribo fasbboot devices si me aparece el modelo de mi moto e4 xt1766 pero ya ala hora de poner flash recovery recovery.img me dice fallo cabe igual mencionar que ya copie el archivo en la capeta de adb y ya le cambie el nombre alguien que me pudiera ayudar entiendo que este modelo es viejo gracias

Is there someone around here who can help me?
I already unlocked the boot from the official motorola page but at the time of installing twrp it tells me a poor error with many img files. Perry several versions and it does not load me at the time of putting flahs recovery recovery.img tells me an error already installed several drivers of mo motorola because I thought that if it was that and nothing is worth mentioning that when in the command window I write fasbboot devices if the Model of my motorcycle e4 xt1766 but at the time of putting flash recovery recovery.img tells me failure, it is worth mentioning that I already copied the file in the adb folder and someone who could help me change the name I understand that this model is old Thank you