Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance
ZeroPointMax said:
Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance
Click to expand...
Click to collapse
Hello zio!! keep calm and have a long breath!!
Flash this with ost:
http://https://mega.nz/#!5ccRnb4b!VsgiKQ4CjxFyjbjcxR0esjeKmHZsUTnEz0FA_FMZQbM.
Don't tap edit phone information but just flash!! the security patches are from july!!
if you have a bad flash try to wipe from settings => restore
Stay away from rooting process until nokia releases the dedicated tools, capisce!!
NON FARTI MALE
Link don't work
wachiwachi said:
Link don't work
Click to expand...
Click to collapse
try now zio
Yes, now downloading But, what's model ROM is this?? For TA-1021?
---------- Post added at 05:30 PM ---------- Previous post was at 05:27 PM ----------
Ok, is for TA-1025 MENA.
wachiwachi said:
Yes, now downloading But, what's model ROM is this?? For TA-1021?
Click to expand...
Click to collapse
What i told you 1 minute ago? keep calm!!! i have myself a nokia 6 and i'ts a 1021. this rom is for that version!
i've flashed this rom and my nokia is still alive.
The most important thing is boot the phone in download mode, i'ts half of work
[solved]
I solved it this way: i downloaded the patched OST from here: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441.
The ZIP of canaop92 did not work for my phone (see EDIT), but gave me a nb0 file for the following
I clicked "edit Device Information" in OST, DO NOT CLICK ON 'NEXT' after that
This installs a functional fastboot onto the device.
The method of canapo92 did not work, explained in my EDIT. So I had to improvise: I downloaded (after an hour of searching for that) a full firmware of the Nokia 6 TA-1021 and mirrored it:
https://drive.google.com/file/d/1kCKSid5Bf89yA3DyX8Y2gAZHq4VK6_p6/view?usp=sharing
https://c.web.de/@337613479567432195/P_ZJsw0bRtiH-KwIPvbjeA
https://1drv.ms/u/s!Agmh3wcexsuyjWysvmeASmEW66ah
https://nextcloud.hobbyist-overclock.de/index.php/s/RX7SxFQcLF7Pj9B
(download one of the mirrors)
Then I 'fastboot flash'ed the following .img files to the device: boot, cache, cda, hidden, mdtp, misc, persist, recovery, splash, system and userdata
That was it - everything working again
Thanks canapo92 for the Help and the original download link
EDIT: the flash without edit phone information did not work, my phone rebooted itself into recovery... weird... so i experimented. I tried to repeat the process with Android working again and now it wiorks
ZeroPointMax said:
I solved it this way: i downloaded the patched OST from here: https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441.
The ZIP of canaop92 did not work for my phone (see EDIT), but gave me a nb0 file for the following
I clicked "edit Device Information" in OST, DO NOT CLICK ON 'NEXT' after that
This installs a functional fastboot onto the device.
The method of canapo92 did not work, explained in my EDIT. So I had to improvise: I downloaded (after an hour of searching for that) a full firmware of the Nokia 6 TA-1021 and mirrored it:
https://drive.google.com/file/d/1kCKSid5Bf89yA3DyX8Y2gAZHq4VK6_p6/view?usp=sharing
https://c.web.de/@337613479567432195/P_ZJsw0bRtiH-KwIPvbjeA
https://1drv.ms/u/s!Agmh3wcexsuyjWysvmeASmEW66ah
https://nextcloud.hobbyist-overclock.de/index.php/s/xY0KpnFz0krBXmF
(download one of the mirrors)
Then I 'fastboot flash'ed the following .img files to the device: boot, cache, cda, hidden, mdtp, misc, persist, recovery, splash, system and userdata
That was it - everything working again
Thanks canapo92 for the Help and the original download link
EDIT: the flash without edit phone information did not work, my phone rebooted itself into recovery... weird... so i experimented. I tried to repeat the process with Android working again and now it wiorks
Click to expand...
Click to collapse
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.
wachiwachi said:
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.
Click to expand...
Click to collapse
Look buddy, when you bought your, at that time if your phone showed up TA-1025 then after flashing it will show you 1025, if it was TA-1021 then it will show you 1021.
You dont have to check the build.prop file, as every nokia 6 TA-1021 shows TA-1025 into its build.prop file
Flash your phone with MENA firmware, it will flash your phone to 1021 or 1025 with june security patch update
Then apply all updates till December
Everything you can find from here https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Follow all the steps care fully
If you want to update to oreo then
Sign up with beta labs from here https://www.nokia.com/en_int/phones/betalabs
And check if your phone gets the oreo update or not
If not then follow this thread for manually update to oreo https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Remember OTA will require wifi connection to get into your phone
Also be calm and read every step carefully, this will take you to least chance to get stuck into any problems.
Press thanks button if you find this helpful
Happy flashing
sltushar said:
Look buddy, when you bought your, at that time if your phone showed up TA-1025 then after flashing it will show you 1025, if it was TA-1021 then it will show you 1021.
You dont have to check the build.prop file, as every nokia 6 TA-1021 shows TA-1025 into its build.prop file
Flash your phone with MENA firmware, it will flash your phone to 1021 or 1025 with june security patch update
Then apply all updates till December
Everything you can find from here https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Follow all the steps care fully
If you want to update to oreo then
Sign up with beta labs from here https://www.nokia.com/en_int/phones/betalabs
And check if your phone gets the oreo update or not
If not then follow this thread for manually update to oreo https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Remember OTA will require wifi connection to get into your phone
Also be calm and read every step carefully, this will take you to least chance to get stuck into any problems.
Press thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Thanks mate, but I have not explained myself well. My phone is a original TA-1000. I have flashed it following the thread of the MENA firmware and then it shows that it is a TA-1025, up to there everything is correct because he only downloads all the OTAs until December, 7.1.2 included. The fact is that I wanted to flash it to TA-1021 to see if I can solve the problem of the horrible sound in calls and that's why I tried to flash this ROM of TA-1021.
wachiwachi said:
Thanks mate, but I have not explained myself well. My phone is a original TA-1000. I have flashed it following the thread of the MENA firmware and then it shows that it is a TA-1025, up to there everything is correct because he only downloads all the OTAs until December, 7.1.2 included. The fact is that I wanted to flash it to TA-1021 to see if I can solve the problem of the horrible sound in calls and that's why I tried to flash this ROM of TA-1021.
Click to expand...
Click to collapse
Then i would like to tell you that, there is no firmware which is made for TA-1021, the varient varries from region to region
If you phone 1021 then it wont change to 1025 and if it 1025 then it wont change to 1021, may be it is the reason that you get device name as unknown right
The mena firmware is an international varient...
Well i would like to suggest you, that if you want the features then u might go with mena firmware and if you want to fix these then i would suggest you flash back the chinese varient and wait for developers to develop a good custom rom for all users...
Till stay relaxed, and if i will get any fix for it then i would surely share those methods..
Hit thanks button if you find this helpful
Happy flashing
Guide me
wachiwachi said:
I followed all your steps, I flashed all the .img on my phone and at the end all the OTAs were downloaded until December, but still showing the model TA-1025, not a TA-1021 like I wanted. I've also done a hard reset, but nothing has changed.
Click to expand...
Click to collapse
Can you guide me how to install above firmware on my nokia 6 ta 1021 running oreo , i want to get back to nougat.I downloaded above firmware Nokia_TA-1021_00WW__PLE__600WW but not able to find a way to install it.Please let me know how to install on my phone. Cant install through OST tool as it asking for .nbo file which is not present in above firmware.
ZeroPointMax said:
Hello everyone,
i messed up: i did the Dec Update for my german Nokia 6 TA-1021 with the updater and the weird chinese "TWRP". Well the recovery made a clean flash with the update file but it only contained a dirty flash update... So basically i need a full firmware for Germany (unbranded) TA-1021 :crying:
For me it does not matter what version since i can update it from there. Is there anyone out there who can help me?
Thanks in advance
Click to expand...
Click to collapse
https://firmwarefile.com/nokia-6-ta-1021
I didn't used personally, please use it with your own risk
Just I got it while surfing internet.
Big Problem with my TA-1033
Hey,
Okay, so firstly sorry for my bad english i'm french ^^
I have a TA-1033 , i can't boot in recovery , i can't boot in my android system just in "Download Mode" , and when i try to restore with OST LA , it don't works , OST LA give me this error : "SE_ERR_ADB_CMD_GET_FAIL_RESULT"
If someone can help me because i'm so scary :crying::crying:
Aventurepix said:
Hey,
Okay, so firstly sorry for my bad english i'm french ^^
I have a TA-1033 , i can't boot in recovery , i can't boot in my android system just in "Download Mode" , and when i try to restore with OST LA , it don't works , OST LA give me this error : "SE_ERR_ADB_CMD_GET_FAIL_RESULT"
If someone can help me because i'm so scary :crying::crying:
Click to expand...
Click to collapse
Okay, your friend told me that you have gained recovery access again. Please do not worry, we can rescue your phone.
First, you have to do Step 1 and 2 of this guide: https://forum.xda-developers.com/nokia-6/how-to/guide-upgrade-downgrade-nougat-oreo-t3752393 but you have to use a firmware file that matches your first letters of your phone's serial number (codename) like PLE or D1C. Using the firmware from other phones can cause unexpected issues but it should boot. Reboot you phone, it won't boot there but that is normal. Apply the OST BL patch again and then you can proceed with 'fastboot flash'-ing the full Nougat firmware or try the homebrew firmware from @hikari_calyx
ZeroPointMax said:
Okay, your friend told me that you have gained recovery access again. Please do not worry, we can rescue your phone.
First, you have to do Step 1 and 2 of this guide: https://forum.xda-developers.com/nokia-6/how-to/guide-upgrade-downgrade-nougat-oreo-t3752393 but you have to use a firmware file that matches your first letters of your phone's serial number (codename) like PLE or D1C. Using the firmware from other phones can cause unexpected issues but it should boot. Reboot you phone, it won't boot there but that is normal. Apply the OST BL patch again and then you can proceed with 'fastboot flash'-ing the full Nougat firmware or try the homebrew firmware from @hikari_calyx
Click to expand...
Click to collapse
All is good , in the recovery , i've used a nougat firmware , and now i'm on android 8.1 , thx (Sorry for my bad english , i'm french)
Nokia ta1021 loop
Ciao ragazzi, ho un nokia 6 1021 che non si accende, va solo in recovery e bootloader, stavo provando questa guida ma ad un certo punto mi blocco, vorrei sapere come devo fare per installare correttamente il firmware? Ho già installato la recovery di nougat ma poi quando installo il firmware tramite ost anche se va a buonfine ritorna alla schermata di boot e poi in recovery.. Non so come fare:crying:
Related
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=172
Seems it's not yet available via OTA
is there a change log?
lassie20 said:
is there a change log?
Click to expand...
Click to collapse
I'm interested too, searched for it but found nothing ..
Change log B190 :
楼主，
华为荣耀7 B190版本
更新公告及问题收集贴
升级方式：
1.分批在线升级（没有收到的还请耐心等候哈！）
2.SD卡下载完整包升级（已经发布）
更新推荐：
优化 手机通话及数据流量上网稳定性
优化 特殊场景通话性能及通讯录匹配，增强用户体验
优化 指纹匹配不正确时的马达震感
优化 屏幕概率性的点亮灰屏
应用：
更新 天际通应用，解决电信WLAN特殊场景下链接问题。
系统：
合入安全补丁增强系统安全性、稳定性
Google translation :
The landlord,
Huawei glory 7 B190 version
Update Bulletin and problem collecting stickers
Upgrade:
**** 1. Batch Online Upgrade (not received yet Please Wait Ha!)
**** 2.SD card Download the complete package upgrade (has been released)
Update Recommended:
**** Phone calls and data traffic optimization Internet stability
**** Special talk performance optimization and matching contacts scene, enhance the user experience
**** Optimization of the motor felt when incorrect fingerprint match
**** Optimize screen lighting probabilistic gray screen
** application:
**** Update sky-application, solve the next problem telecommunications link WLAN particular scene.
** system:
**** Fit into the security patches enhance system security, stability
i brick my al10 64gb ..now on bootloop.please someone help
warriorsach said:
i brick my al10 64gb ..now on bootloop.please someone help
Click to expand...
Click to collapse
It is easy, do you need download de rom (190) in the emui website
Afer that extrat the update.app and flash in fastboot "system", "boot" and "recovery"
You have tutorial in this link: http://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
In other order of things, do someone know a twrp how works with his rom? (190) I tryed with 3 diferents and not works. With 188 i dont have any problems with twrp
bro i already have B188 update and i done the all things like extract files from update.app and then manually flash via fastboot,,,but those dosent work..and i m not able to boot in recovery i can only boot in to fastboot..
i already follow all instructions.
and i m not using europian version
im using PLK AL10 64gb model
warriorsach said:
bro i already have B188 update and i done the all things like extract files from update.app and then manually flash via fastboot,,,but those dosent work..and i m not able to boot in recovery i can only boot in to fastboot..
i already follow all instructions.
and i m not using europian version
im using PLK AL10 64gb model
Click to expand...
Click to collapse
I know that you have chinesse model, not eu, me too, but i put this tuturial because the steps are the same (not roms).
Maybe you could try with other adb tool (minimal adb fastboot works fine) and you can download the rom again. I had the same problem that you and i solve with this way (flashing system boot and recovery Of 190)
I hope that you can solve it soon
Tirizia said:
I know that you have chinesse model, not eu, me too, but i put this tuturial because the steps are the same (not roms).
Maybe you could try with other adb tool (minimal adb fastboot works fine) and you can download the rom again. I had the same problem that you and i solve with this way (flashing system boot and recovery Of 190)
I hope that you can solve it soon
Click to expand...
Click to collapse
you are the man..buddy finally solve, and overcome from bootloop, your combination are perfect. 1st system then boot and then recovery...thank you buddy god bless you.
It is famous problem with twrp for Honor 7 - often it loop after flashing.
You could pres all 4 buttons and it helps to regular boot!
Did you flash stock recovery to twrp?
warriorsach said:
you are the man..buddy finally solve, and overcome from bootloop, your combination are perfect. 1st system then boot and then recovery...thank you buddy god bless you.
Click to expand...
Click to collapse
I am glad to help! But i am the woman not the man haha
Enjoy your "new" Honor 7, friend
I have rooted B188 [PKL AL10]. I unrooted it, than updata to B190 than to 5.12.16 - all using local updata. I did not loose any data.
After that I received OTA to MM 6.0 (ROM 6.1.1) - instaled via OTA.
All my personal data are ok.
But now I do not know if it is possible to root MM 6.0 Rom 6.1.1?
Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
I succeded in installing EMUI bit it's NRD90M test keys. I found online some guides that say to use twrp in order to flash the full update. But I cannot install any twrp because when I go in fastboot mode it says:
Bootloader unlock (red)
FRP Lock (green)
you need restore device with dcphoenix(paid method)
For any steps of fastboot, need frp unlock.
rambik33 said:
For any steps of fastboot, need frp unlock.
Click to expand...
Click to collapse
fastboot oem unlock xxxxxxxxxxxxxxxxxxxxxx (bootloader code)
exilio99 said:
Hi everyone, I installed RR on my P10 lite (WAS-LX1A) and all used to work great except for the sound so I thought that the ROM was not good and I began to reinstall the backup of EMUI I did with TWRP but without success. So I searched online the stock firmware and I found several versions and I tried to install one using a guide and It seemed to work until I began the first configuration of the device. Every time I finish the configuration It resends me to the beginning and I cannot install other firmwares because they stuck on 5% or it gives me "Installation failed". I cannot install TWRP too because fastboot says "command not allowed" when I try to flash it even if my bootloader and Phone Finder are unlocked. Please help me.
Click to expand...
Click to collapse
Hello, you can not do nothing if either FRP or bootloader are locked. You can either use DC Unlocker to unlock the FRP lock or DC Phoenix To Flash The Stock Image all over again... or you can take it to repair for mainboard replacement. I reccomend that you unlock frp and then extract the stock firmware using huawei update extractor. You can get the firmware by installing Firmware Finder On your pc and then searching for an appropriate firmware.
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
exilio99 said:
Thanks, I succeeded installing a stock firmware I found online but there's another problem now. Some stock apps are missing just like the file gestor and the updater in settings. If I go in phone information it gives me that my firmware is NRD90m test-keys. What should do I do?
Click to expand...
Click to collapse
missing some apps because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
I'll try it. Thank you!
hayabusa2yk said:
missing firmware because of dead cust,vendor,product...etc.
You can restore your phone using stock system updater and huawei firmware finder's proxy server
update to your device firmware version's fullOTA
and you can back to stock!
tested with my was-lx2j
sorry for my bad english
Click to expand...
Click to collapse
is it possible install apk from system/priv-app or similiar, i think is missed
foliaje said:
is it possible install apk from system/priv-app or similiar, i think is missed
Click to expand...
Click to collapse
Yes you can but no need to do it because it already installed.
Sorry for my bad English
hayabusa2yk said:
Yes you can but no need to do it because it already installed.
Sorry for my bad English
Click to expand...
Click to collapse
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
foliaje said:
Excuse me but in 4th post, he hasn't an updater option in settings, in my second huawei(semi-breaked)
No updater, no file manager, no stock gapps(i dont care), build number system-5.1.78(fail to change oeminfo etc..) so tell me clearly like fix.
Click to expand...
Click to collapse
try firmware updating with hisuite + huawei firmware finder's proxy
I tried but it's stopped at 5% of installation. I cannot do a update through the updater because it doesn't exist in this test version. Can I try something else?
I tried with hisuite and firmware finder using the proxy method but it can't find any update...
its taking forever stuck in "reflash service bootloader" 2000 seconds and still counting
using ost 6.1.2 version to downgrade from oreo ofc to nougat
You need to flash sbl/aboot from Nougat and after that use OST LA 6.0.4.
You can get sbl/aboot by installing Dec OTA via SD card from recovery. It will fail, but you will get recovery, sbl, and aboot from Nougat. So you can use old OST tool.
qwertysmerty said:
You need to flash sbl/aboot from Nougat and after that use OST LA 6.0.4.
You can get sbl/aboot by installing Dec OTA via SD card from recovery. It will fail, but you will get recovery, sbl, and aboot from Nougat. So you can use old OST tool.
Click to expand...
Click to collapse
give me download link please
Mayersdz said:
give me download link please
Click to expand...
Click to collapse
https://forum.xda-developers.com/no...ink-ota-monthly-updates-t3733784/post75162860
There you go
sltushar said:
https://forum.xda-developers.com/no...ink-ota-monthly-updates-t3733784/post75162860
There you go
Click to expand...
Click to collapse
to finish this discusion after i download it i put the ota to sd then start recovry then what exatly ?
Mayersdz said:
to finish this discusion after i download it i put the ota to sd then start recovry then what exatly ?
Click to expand...
Click to collapse
well i broke my phone now iits booting to reccovry mode after failed flashing with 6.04
now its stuck in "powered by android"
Mayersdz said:
well i broke my phone now iits booting to reccovry mode after failed flashing with 6.04
edit 1 : now its stuck in "powered by android"
Click to expand...
Click to collapse
edit 2 :
what is going on the phone is flashing the ple software even tho it warned me that my software is d1c
so why it failed then with d1c ta 1000 original ?
im confused now is it maybe i got ota update of 7.1.2 because thats what its written in the recovery mode and we all know that ta 1000 have 7.1.1 nougat and no 7.1.2
i got this ple software from :
https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
and it flashed successfully even tho ta 1000 original software failed !
edit 3 : oups now im ta-1025 user :silly:
Mayersdz said:
edit 2 :
what is going on the phone is flashing the ple software even tho it warned me that my software is d1c
so why it failed then with d1c ta 1000 original ?
im confused now is it maybe i got ota update of 7.1.2 because thats what its written in the recovery mode and we all know that ta 1000 have 7.1.1 nougat and no 7.1.2
i got this ple software from :
https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
and it flashed successfully even tho ta 1000 original software failed !
edit 3 : oups now im ta-1025 user :silly:
Click to expand...
Click to collapse
Have you downgraded from android 8.0 to 7.1.1? Can you take a screenshot for yourself?
Mayersdz said:
edit 2 :
what is going on the phone is flashing the ple software even tho it warned me that my software is d1c
so why it failed then with d1c ta 1000 original ?
im confused now is it maybe i got ota update of 7.1.2 because thats what its written in the recovery mode and we all know that ta 1000 have 7.1.1 nougat and no 7.1.2
i got this ple software from :
https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
and it flashed successfully even tho ta 1000 original software failed !
edit 3 : oups now im ta-1025 user :silly:
Click to expand...
Click to collapse
Why dont you flash this one
https://forum.xda-developers.com/no...ink-ota-monthly-updates-t3733784/post75162860
This is official TA-1000 firmware and can be flashed using OST
taicracker said:
Have you downgraded from android 8.0 to 7.1.1? Can you take a screenshot for yourself?
Click to expand...
Click to collapse
https://imgur.com/a/m90Ya
here you go from ofc 8.0 to the wrong nougat for my chinese model
sltushar ?
i want nougat software 7.1.1 not oreo
by the way im now using ta 1025 software
so do i need to install those updates one by one or directly jump to the last nougat update
maybe im just gonna stick with ta 1025.
i have installed ta 1025 for my chinese model and its downloading auguest update after it downloaded july update
this is weird updates are available even tho the software is not the original
https://imgur.com/a/W86b0
i ll update here if it download all of them until december
edit 1 :
september update too available : https://imgur.com/a/ifq30
edit 2 :
octobre update available with 7.1.2
https://imgur.com/a/36HQK
Mayersdz said:
sltushar ?
i want nougat software 7.1.1 not oreo
by the way im now using ta 1025 software
so do i need to install those updates one by one or directly jump to the last nougat update
maybe im just gonna stick with ta 1025.
Click to expand...
Click to collapse
Mayersdz said:
i have installed ta 1025 for my chinese model and its downloading auguest update after it downloaded july update
this is weird updates are available even tho the software is not the original
https://imgur.com/a/W86b0
i ll update here if it download all of them until december
edit 1 :
september update too available : https://imgur.com/a/ifq30
edit 2 :
octobre update available with 7.1.2
Click to expand...
Click to collapse
I m sorry, last time the link didn't copied to clipboard
Find it down here
Quixote78 said:
Sorry for keep you waiting. Here are instructions to restore original software on TA-1000.
1. Download original software for TA-1000 (build 00CN_3_31A_SP) in nb0 format
https://yadi.sk/d/fN5Oinvt3MwufR
2. Download OST LA v6.0.4
https://yadi.sk/d/hkDVImee3NAZ7a
3. Download patch
https://yadi.sk/d/Tm2MvTJs3NAZy2
4. Unpack OST LA with 7zip and install on your PC
5. Unpack patch (password 123)
6. Replace an exe file OnlineUpdateTool with an exe file OnlineUpdateTool exracted from the patch and delete OnlineUpdateTool.exe.config in a folder C:\Program Files (x86)\OST LA (see pic.1 and pic.2)
7. Unpack software with 7zip.
8. Start patched OST LA from the above mentioned folder by double left-click on exe file incicated on pic2.
9. If everything is alright the program will run without requesting login and password to hook up with a server.
10. Select the original software.
11. Enter your Nokia 6 into Download mode connected with USB cable to your PC.
12. After your device enter into Download mode, the button Edit Phone Information will be available. Push that button and wait for a error (something like failed to reboot to FTM mode) being appeared. Don't be so tragical about it. Press OK and see the button Next should be activated..
13. After button Next become active, press on it and and have an eye on the flashing process or have a cup of tea not to kill time.
14. The flashing process takes approx. 358s
15. Your device will reboot and you may congratulate oneself.
NOTE! 1). After your device having been flashed you'll get the software TA-1000, build 00CN_3_31A_SP and then it'll get OTA update twice to TA-1000, build 00CN_3_31D, September 1, 2017 security update. 2). After hard reset Google Play and all Gapps will be deleted.
Click to expand...
Click to collapse
This is official TA - 1000 FIRMWARE
Mayersdz said:
i got this ple software from :
https://forum.xda-developers.com/nokia-6/development/nokia-6-official-firmware-mena-region-t3664441
and it flashed successfully even tho ta 1000 original software failed !
edit 3 : oups now im ta-1025 user :silly:
Click to expand...
Click to collapse
You flashed wrong firmware. Use links from the last sltushar post.
qwertysmerty said:
You flashed wrong firmware. Use links from the last sltushar post.
Click to expand...
Click to collapse
i have downloaded that original 1000 from same links he gave me and i have 2 versions
1000 ta and 1025 from mena region thread
1000 ta failed to install so i tried ta 1025 software and it flashed successfully with ost 6.0.4 .
You had to install Dec or Jan OTA update for TA-1000 through recovery in order to get Nougat sbl/aboot for TA-1000. I can find a link in a couple of hours, sorry not at the computer atm. Or you can find yourself in OTA Update DDLs thread. Someone posted it in comments.
Try this one https://mega.nz/#!uFUxSIBA!t-5slu-0UdVxawyt0tDG_l2NnKQjSo_zaEOplVSATYE. It's 7.1.1. Jan OTA for TA-1000. Install it through recovery, it will fail, but you will get recovery, sbl, aboot partitions flashed to 71.1 for TA-1000. After that try to flash TA-1000 factory image using OST LA 6.0.4
qwertysmerty said:
Try this one https://mega.nz/#!uFUxSIBA!t-5slu-0UdVxawyt0tDG_l2NnKQjSo_zaEOplVSATYE. It's 7.1.1. Jan OTA for TA-1000. Install it through recovery, it will fail, but you will get recovery, sbl, aboot partitions flashed to 71.1 for TA-1000. After that try to flash TA-1000 factory image using OST LA 6.0.4
Click to expand...
Click to collapse
I have full update files from August to December of Nokia 6 (TA-1000) (D1C) not required (PLE) for you to upload.
qwertysmerty said:
Try this one https://mega.nz/#!uFUxSIBA!t-5slu-0UdVxawyt0tDG_l2NnKQjSo_zaEOplVSATYE. It's 7.1.1. Jan OTA for TA-1000. Install it through recovery, it will fail, but you will get recovery, sbl, aboot partitions flashed to 71.1 for TA-1000. After that try to flash TA-1000 factory image using OST LA 6.0.4
Click to expand...
Click to collapse
Surely your way of success? Because I think if you can not flash fw with OST 6.0.4 then the phone will hang logo, because there is no fw 8.0 for Nokia 6 format nb0
He can always install Oreo from SD card if there is working recovery. Oreo OTA has no preconditions, but his goal is to revert to Nougat. OST 6.0.4 does not work with Oreo sbl/aboot, OST 6.1.2 does not work either without online authentication.
Install oreo AL10 chinese version on Mate 8 L09
1. You have to be in nougat, install the rollback to marshmallow creating on your MicroSD a folder named dload and inside this folder put the UPDATE.app, install with the 3 button combo or from the engineers menu, the change from l09 or 29 to al10 is only secure from android marshmallow..
2. Install the rom B100 with the 3 button combo, if you have an unlocked bootloader it will relock, you must have to unlock the bootloader many times here (2 or 3)..
3. After the reboot on the dload folder put the rom NXT-C00B129SP02, unzip this on dload and at the root of the sd put the OemInfo-all_cn.zip.
4. Now you have marshmallow with the NXT-C00B129SP02... flash TWRP via fastboot i will upload all this files.
5. Start the TWRP and flash OemInfo-all_cn.zip
6. Restart the phone on bootloader, flash the stock recovery, restart from adb (fastboot reboot) and when the screen turns black press the up and down volume buttoms to flash the dload... dont let the phone boot winouth installing the dload.
7. Now afther installing this you must be booting on marshmallow chinese version, some times this will take some time to boot, always leave it, if you wish you can update to 8 via ota but you probably aren't gonna have imei or signal, on your sd create a folder named B596 there you have to put HuRUpdater_0.4.zip and update.zip from B596 (everything uploaded in the pack).
8. Now flash TWRP marshmallow again, install the HuRUpdater_0.4.zip in B596 ( when the phone vibrates press the volume down button to install ), when it's ready reboot the phone.
9. Now you have Nougat chinese version ( no signal yet ), on your sd create a folder named B834 ( i will upload everything just to copy and paste) and there you will have the HuRUpdater_0.4.zip and update.zip... update_data_public.zip files..
10. InstallTWRP Nougat and flash the HuRUpdater_0.4.zip.
Now reboot the phone and wait, this will take time but it starts..
L29 To al 10:
You must check on Firmware Finder if your phone accepts the Oreo update.
1. Downgrade to Emui 4.0 any version..
2. With SRK tools change oeminfo y custom.bin to AL10. (You must have unlocked bootloader and root)
3. Download the NXT-AL10C00B172 rom and install with the 3 button combo.
4. Now you will have marshmallow with no signal.
5. Conectar to WiFi and update via ota to the last version, it will be 4 or more, install all versions
6. You will finish with B596
7. With B596 install Firmware Finder y search for this rom (NXT-AL10C17B828 (8.0.0.828), FF-No.: 152726) (Install it via Proxy).
8. Now you have Oreo B829 winouth signal.
9. Flash your cust ( from your region) via Fastboot with "fastboot flash cust cust.img"
9. Wipe everything (factory reset) and booting first time deactivate the updater, if you dont maybe there will be a permanent menssaje)
If you want open kirin!!
Flash via adb this command
fastboot flash system <name-of-rom-image-file>
Install TWRP Oreo, open TWRP, change language to english and search for the option fix encription, swipe to install the script and wipe data, all here on TWRP, now reboot to system and leave it boot, i have my NXT L09 from Colombia, running Oreo 8.1.0 with Openkirin Resurrection Remix OS, sorry for my bad english and i accept comments...
Link with everything for L09:
http://www.mediafire.com/file/eherlv3ht9xocg0/Files.rar
Link with everything for L29:
https://mega.nz/#F!L9RlXSiJ!BZ8Lzu5f0G3QvTYHLDrVNA
Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
An explanation from numeral 6, I hope in Spanish I am from Colombia, friend thanks for mate 8 nxt-L09 I do not understand what the boot manager among others
juanchos650 said:
Una explicación desde el numeral 6, Ojalá en español soy de Colombia, amigo gracias para el mate 8 nxt-L09
No entiendo lo del gestor de arranque entre otros
Click to expand...
Click to collapse
https://www.htcmania.com/showthread.php?t=1441276
Can you upload other screenshots? Of the three it only opens first
are there any major bugs you found on openkirin?
Phone Model "Unknown"
Hey thanks for the sweet tutorial. Amazingly simple but worked so well unlike some others I have seen. Bricked my Mate 8 so many times I still skeptical of the fact that I am actually on Oreo. Thanks dude.
I just have one problem though. My phone model says unknown in the about screen. How can this be rectified? Really hoping you can assist.
Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?
nobody will share his experience about this rom on l09? Stability? Bugs?
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img
E_N_Y said:
Hi, great tutorial, I was just wondering. Is it possible to use any other rom for the AL10 then the chinese one?
Click to expand...
Click to collapse
Sorry for this time, I wish I could help you today, you can change the al10 to l09, search about it, the you can install any l09 rom or go back to al10
rophiroth said:
nobody will share his experience about this rom on l09? Stability? Bugs?
PD: Step 4 is wrong.. at that point we only have that version on dload but not installed.
PD2: Can't install twrp oreo, must use fastboot flash recovery_ramdisk RECOVERY.img
Click to expand...
Click to collapse
Thank you for your help! I forgot to explain that, I can say this about the rom, 5 months using it, really good, I think the charge is fast than stock, I thing, never metered, no bugs at all, very functional.. :laugh:
No bugs at all? I'm full of graphic bugs when using split or multiple window...
Can someone explain why we even get signal? in the tutorial since the debranding on all AL10 roms there is no sim detection, and when it comes to HuRUpdate the oreo stock al10 rom it works... The rom has some modifications?
L29 download link not work
What is the latest version of oreo (before patches01-02)? and which of the 5 files should I put, I always have in the system compilation
update.zip
update_full_NXT-AL10_all_cn.zip
update_full_NXT-TL00_cmcc_cn.zip
update_full_NXT-DL00_dualcu_cn.zip
update_data_full_public.zip
update_full_NXT-CL00_telecom_cn.zip
"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?
ngg71 said:
"Restart the phone on bootloader, flash the stock recovery"
On step 6, can someone kindly explain which file is the stock recovery image i need to flash?
I answered my own question.... I used Huawei Extractor and used recovery.img from the update.app of the al10 rom.
I finished all the steps, and now my phone is now on Android 8 Emui 8, THANK YOU SO MUCH
but ...........
I am missing all google apps.!!! and the system will not allow me to add a google account,
Is this expected? the same situation for everyone else?
Click to expand...
Click to collapse
Search play store apk on Google, it is the first result, install it and go.
Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.
ngg71 said:
Experiencing graphic bugs also. Camera app freezes lower half image sometimes. Also, I set the region and language to my country (Colombia) but some system menus pop up in chinese, (dont know what they say) , unable to change or apply themes, some apps wont install from the huawei app store, and sometimes the browser wont connect to websites. On the plus side, the phone is very fast and battery is great.
How can I rollback to L09 nogaut or marsmallow version?? I tried starting the tutorial from the beginning and rollback to marsmallow, but all the update.app files that I used from the tutorial failed using the recovery menu.
Click to expand...
Click to collapse
it's the same process, but vice versa ...
https://m.facebook.com/story/graphq...wMDAwMDgwNjQ0MjU0MTpWSzo4OTIxMDg3OTc2NTA3NjU=
So anyone bugless?? I only upgrade to oreo without bug with another method... that don't have network available :'c... I dont know how to have both at the same time
For Signal Fix No need to flash your region cust follow these steps.
1.open any root explorer
2.goto /cust/all/cn/prop and rename local.prop to local.prop.bak
3.restart and wait for 10 seconds
I know its ugly but it works and you won't lose updater too.
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were “_Flash_lock.bat”, “_Flash_.bat”, “_Flash_erase_userdata_lock.bat” and “_Flash_erase_userdata_lock.bat” files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
what about deleting those underscores before each word, i think they shouldn't be there.
kuartito said:
what about deleting those underscores before each word, i think they shouldn't be there.
Click to expand...
Click to collapse
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
finxminx said:
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
Click to expand...
Click to collapse
i'm by no means an expert and my advice has no value at all, but i don't see why you wouldn't give flashing from fastboot a try.
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
What directory did you select in miflash?
JakobSWE said:
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
Click to expand...
Click to collapse
I downloaded 3 copies of 10.0.3.0 firmware from different places and each one claimed those firmwares were for fastboot, not twrp. I attached the folder's screenshot.
henk_j said:
What directory did you select in miflash?
Click to expand...
Click to collapse
I attached the screenshot of the directory.
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
flash this official pie rom
http://bigota.d.miui.com/V10.0.4.0....0.PDHMIXM_20190104.0000.00_9.0_2cee840c96.tgz
...
Stuck in Loading Screen after Update Magisk
I have the same problem here,, This morning i got nontification from Magisk to update to the new version,, and update done, Magisk start reboot,,, when reboot,, i always stuck on Loading Screen. I check from TWRP my Internal Storage cannot detect by Pc,, So i think i cannot doing Flashing by TWRP,, I'm wipe out all data to clear this mess,, so i start to do a flashing with MIFlash, i'm download the custom rom and start flashing.. and i got this message "cannot found file flash_all_lock.bat"
Sorry for my Bad english.. cus i'm still young