Hi, i have problem after debranding my galaxy.
Wifi is not turning on, and i can't call, when i try, there is a black screen.
I have branded PL in "Plus", and i tried with xeo roms from april (I9505XXUAMDE) and may (I9505XXUAME2) and modems for them.
When i tried first time to change rom, i had error in odin (can't write or something like that). So i rooted my device using cf-auto-root, changed csc from btu to xeo, then I9505_OFFICIAL_STATUS_MOD, wipe and triangle away, then rom.
How i can fix that?
pierzu said:
Hi, i have problem after debranding my galaxy.
Wifi is not turning on, and i can't call, when i try, there is a black screen.
I have branded PL in "Plus", and i tried with xeo roms from april (I9505XXUAMDE) and may (I9505XXUAME2) and modems for them.
When i tried first time to change rom, i had error in odin (can't write or something like that). So i rooted my device using cf-auto-root, changed csc from btu to xeo, then I9505_OFFICIAL_STATUS_MOD, wipe and triangle away, then rom.
How i can fix that?
Click to expand...
Click to collapse
If I be you - i try to go to Advanced phills touch recovery menu, format there everything (system, data, partitions EVERYTHING) except sd card. Then i would like to try to flash Android OS (4.3) with repartition (pit file if I remember it correctly). After that, the good idea is install root, than phills touch again (I don't remember, but something overrides another one and recovery menu dissapears or...whatever, need to try) and test again if you have this issue.
Giving this information you gave, it's even for SUPER DUPER PRO EXTRA HIGH-RANKING with IQ over 9000 developer is actually impossible. Anyway, I'e just told you the best way how to fix it.
I found somewhere similar problem, and i tried to install 4.3 rom, and everything works fine
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
The same problem exactly!!! And I do all reset severel times! Help us!!!
Garri1980 said:
The same problem exactly!!! And I do all reset severel times! Help us!!!
Click to expand...
Click to collapse
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
moustafaatchy said:
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
Click to expand...
Click to collapse
-i did that also sir but the problem persist..
moustafaatchy said:
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
Click to expand...
Click to collapse
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
ian_drimworld73 said:
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
Click to expand...
Click to collapse
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
moustafaatchy said:
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
Click to expand...
Click to collapse
-0x1
ian_drimworld73 said:
-0x1
Click to expand...
Click to collapse
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
moustafaatchy said:
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
Click to expand...
Click to collapse
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
arinsms said:
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
Click to expand...
Click to collapse
-I did that several times sir. still no luck
Hey, did you burn plywood the correct version of rum for your device? Moreover, you must make fool wipe, what version you had before making the root? That if there is a 4.3 to try to go back to 4.4.2
Sorry for bed English
Sent from my SM-N900 using XDA Free mobile app
ian_drimworld73 said:
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
Click to expand...
Click to collapse
You said you tried updating the firmware of your region and the problem persists .. You should let someone flash the software using a BOX (not just using odin) (preferably go to Samsung)
if it's not solved then it's most probably a hardware problem .. I didn't drop my phone either but that's not necessary
Same problems with my n9005
ian_drimworld73 said:
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
Click to expand...
Click to collapse
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
solved mine
pisicutumic said:
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
Click to expand...
Click to collapse
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
NEWS
ian_drimworld73 said:
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
Click to expand...
Click to collapse
I saw now the CSC is XSP this is the only prb but also is csc free no bloatware.also you can root back again and you can restore your old settings except :
1. CSC settings and APP settings that camed with your original firmware
2. when insert your sim back you will be notified to update internet settings to your provider ( for me Vodafone RO) , you can change them back to google.com . is ok THX for your apreciation.
Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
ooMoo said:
Ages ago because i was impatientto update my phone so i flashed the Polish Stock using Odin, since then i have used Odin to flash the UK Stock, though when i wipe and reset the phone it still initially comes up with the polish language, (not a massive issue i know but i want to get UK OTA if it ever comes) also if i go to sell the phone at the end of this year when the Note5 is out im sure the new owner would want to turn it on and see english.
Ive tried
Clearing the EFS cache and resetting the phone from recovery before and after flashing BTU
I made sure reactivation lock was off as I wondered if that would cause an issue though that hasn't helped. does anyone have any other ideas?
Im un-routed as i sometimes use my phone to test out corporate BYOD so cant root of flash a custom rom.
thanks all for any help.
Click to expand...
Click to collapse
Download Phone INFO Samsung from Play and check the CSC.
But it might be you are rebooting into DL mode instead of shutting down the phone then starting it in DL mode. I usually remove the battery for a bit and hold the power button for a few secs to make sure the mainboard is completely discharged. Odin (& other methods) all have problems changing BL and Modem if you just do a reboot into DL.
You might want to take a look at Multiboot and Recovery for the possibility of having the ROM you want, rooted etc. AND still have a stock ROM you can choose to boot into for work purposes.
So when this phone was on stock fng2 firmware long ago when it was current firmware. I sent it off to a guy who was offering very cheap unlock. used it fine since then. but wanted to put stock rom on it and make it completely Samsung official with no problems. so it is ready for selling. but when I get the latest firmware which is ok3 and flash with odin. after booting in those crashes start happening about 2 times per second. phone is useless. I made it to settings menu and looked at baseband and software version both show unknown so I flash stock ok3 modem still samething. then I try these full firmware images:I flash od2, same thing oh1, same thing, factory reset doesn't do a thing on the rom with issues. then I try fng2 it works perfect. then I use use od2 oh1 ok3 update.zip to get ti to latest version and it works perfect. modems upgrade and work fine. but when on latest version I reset phone from the settings menu to factory default same issue after phone as booted. so currently phone is useless if it is ever resetted. so no selling. any solutions.
the issue seems to reside with the modem. probably guy messed up a lot of settings in service mode?
You name it I have tried it most likely
any ideas anyone?
anyway to reset nvram to factory default.
i have reseted it in service mode. were it says a golden backup exists. that didnt solve anything
I've tried many many things but nothing seems to work for that issue. Only way I've gotten around it is by doing a dirty flash of kitkat with odin.
Hi guys,
Yesterday, I installed the official 8.0 update through Odin. Right off the bat, I noticed the settings app was completely broken. I extracted the APK off of another rom on XDA but it didn't change.
I should point out most of the sub-menus available are not clickable, it's just plain text.
Do any of you experience this or am I the only one? Thanks.
How was Odin set during installation? I mean settings, files you used.
hardcore515 said:
How was Odin set during installation? I mean settings, files you used.
Click to expand...
Click to collapse
I used the files found in the official zip over on sammobile and the options in Odin were the default one, I haven't changed anything
First of all - 15 kB/s? You are patient There were better sites to download the firmware from.
Second of all, I think you've flashed home_csc (without factory reset). In situations like this doing factory reset really can help (or try flashing phone again now using csc instead of home_csc). Quite "generic" help I know buuut those things may just work for you.
If you don't want to lose data, you can wait. Maybe someone else can help
hardcore515 said:
First of all - 15 kB/s? You are patient There were better sites to download the firmware from.
Second of all, I think you've flashed home_csc (without factory reset). In situations like this doing factory reset really can help (or try flashing phone again now using csc instead of home_csc). Quite "generic" help I know buuut those things may just work for you.
If you don't want to lose data, you can wait. Maybe someone else can help
Click to expand...
Click to collapse
I used another link provided by an user on the forum on the mega thread "Official stock firmware". I checked and everything was correct so I assume it is the right version of the software.
I actually didn't flash home_csc. I wasn't sure what that was so I didn't want to flash some weird stuff so I left it out.
As far as I remember, I haven't had these problems with leaked vietnamese rom or with s9+ ports. However, I had this problem with the TWRP bump we had on the forum a couple of days ago but the additional options disappeared after a couple of seconds, not sure what was going on.
Did you fixed the problem ?
Yeah you flash the non-home_csc or do a factory reset in recovery mode. It's the system settings data from previous firmware conflicting with it which can only be fixed that way.