Hi Everyone,
I have accidentally updated manually my F4 color to F4 black and white, its screen is black now, Bluetooth and other things are working fine, i need firmware for DT NO 1 F4 color version, kindly help
Dt no1 f4 color firmware
Same problem here!!
I contacted dt support, with no news 2 days now.
The only asked me if i bought f4 or f4 color.
I did firmware update, as the band couldnot connect to both app, fundo and dt, from the box. After firmware update, connects,everything seemsto work except. The screen...
I didn't knew that there was and a b/w f4 smartband.
There was my fault!
Related
Hey guys, ive got a little problem, a few weeks ago my phone got some water in it, i turned it off right away.
Today i wanted to see if its working so i tried to turn it on, nothing happens, if i connect it to a charger then the led turns on (red) and the screen starts flashing colors, its like changing colors from green to blue to red to white every 1 second.
I can get into DFU mode.
Can someone guide me on how to unbrick it? (if its even possible)
Thanks a lot!
Hi. Did you get a method to repair your phone? I have the same model with the same symptoms. I can't find any answers online. Thank you.
i brought No 1 D5 Watch after few days it restart autometic and get stuck on Boot Loop restart logo Appear than auto Restart and it is continue i buy this from aliespress and from my country i am unable to send it back due to electronic custom Issue .
i try to reflash it but still same problem any help please .
Same problem here with X3 watch (same as No.1 D5). Continues bootloop, no matter what buttons pushing, I cannot get into recovery mode to make a factory reset. Also ADB not connecting to the watch (USB debugging not enabled in watch?)..... Reflashing software did not help, still in bootloop. Disconnecting battery did not help either.
I'm at the end of my possibilities. Anyone has some suggestions what I can try next?
Watch skin problem
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
No.1 D5 black screen
Hi,
I have the same problem. Do you have any solution?
Thx!
s_alish said:
Hi, i am sorry i need some one help here, i got my No.1 D5, and i was trying to add watch face from inside the watch using the (+), i chose the one i want, download start and installing message confirmation is ok, then a black one (nothing there) added to the faces list, when i chose it there is only black screen, touch swip is not working, long press the btn show the normal options, i can power off and power on, but gain once powered on the face is black.
thanks in advance
Click to expand...
Click to collapse
Cicconia said:
Hi,
I have the same problem. Do you have any solution?
Thx!
Click to expand...
Click to collapse
have you guys ever figured it out? same problem here
i guys i need some help and advice please
my htc 10 broke lcd, it was still working even with broken lcd, all was fully working even both Back and Recents keys
i change lcd but now the Back and Recents keys don´t work, when i turn on screen the 2 Back and Recents keys light up , then light off, and when i touch them there is no response at all
anyone had this kind of problem?
btw Back and Recents keys are integrated in the screen or part of mobile phone?
please need help
------
Right now i received the phone after LCD was changed , both back and recent buttons dont work...
Touch screen and central Button are fully working
But when i enter twrp the Touch screen stop working and i cant do nothing... This is very strange... Even i manage Tô hard reset phone this problems keep going
My HTC 10 is the American sprint version
I unlocked bootloader and installed last venon tom
I buy new LCD in AliExpress
Anyone have a clue why in twrp Touch on screen dont work? Its working nice in the ui....
-------
after 3 weeks i send my htc to htc official repair center they send me back my phone and said this:
"Equipment outside EU, spares necessary for service not avaible, please contact retailer"
this is a htc 10 sprint version, anyone can tell me if htc 10 from sprint is different from "normal" htc 10 ???
i reinstall sprint official last 7.0 rom
i flashed twrp and screen don´t work in last twrp
what is the problem? because the screen works fine in sprint rom, only the back and recent buttons don´t work because of some hardware failure
before i broke screen and replace it, twrp was working just fine
original post
https://forum.xda-developers.com/htc-10/help/help-urgente-help-replace-lcd-recents-t3592217
Thread closed.
In the future, please don't create duplicate threads or posts here on the forums.
Cheers,
Magnum_Enforcer
FSM
Hey! So i got a Huawei P8 (on the phone was GRA-L09 on the back) phone from my family in another country. All was okey, all was working fast and the notification slide was working until i wanted to install some apps from my country (sweden) - i could not install local apps (f.ex. bank app). I downloaded update firmware (didn't make a backup - typicall me), run it...
Finally i could install all local apps i needed but i couldn't slide the upper notification bar... after a long tests and meny downloaded updates ..it looks like notification slide works sometimes, but most of the time it does not. To make the notification slide work i need to flip screen to the side and from the side it works fine.
Conclusion - i turned on the touch dot that i could see where i touch - i got shifted touch screen a few milimeters down, so the touch doesn't even come that much up on the screen (even if my screen works perfectly).
Is there a way to move the touch back up?
Phone Huawei P8 GRA-L09
HARDWARE: GRACE_UL_VN1
Bootloader: GRA-6_0-2016_0513_0300_FASTBOOT
Kernel V: GRA-C900B390_BOOT
What can i do to shift it back or just make it work? Can't find any firmware or anything else regarding the phone.
On the photo this is how high i can get, but it stops under the bar...
Best Regards,
P.
PS. The second picture is when it is stuck and at that point it works fine. Then it stops working again...
presentation:
Hello, to all the experts in cell phones, I have read a lot your forum, solutions, and curiosities that you find programming.
problem in consultation:
I have a galaxy j3 2016 sm j320m and it presents the yellow screen problem, when (I have seen the same green screen problem in the Samsung S20) I put the original rom with odin again, I put another modified ro with twrp that they did in my country with nature theme of the S5 free d this link
but it continues with the yellow screen, the applications are navigated and after 5 seconds or 10 seconds the screen turns yellow, lowering the notification bar, as in the samsung s20 modifying the brightness to "outside" or changing to the minimum and Maximum, the screen is normalized, now I put a black background theme that solves it faster, but when it was with its original theme in green it took longer.
If you want I can upload a video of the problem to see if you can find a solution, I have read on the internet that there is already a patch for the S20 green screen.
thanks for your attention
------ ✍✍✍✍
5 : 55 pm
Edit : vid add my celphone