Database Users

[FIX'ed]{BootStack D805 Bad File = Secure Error Boot Loop, Only Download mode}

Well Ive done all I could, my model is a D805. Always installed 802 without not problem. in it. All started when I try to install CloudyG3 and had to install KK bootloader. Always that installed a bootloader it gave me the Q_USB brick error that always fix it with DD .imgs and went always well. Then I tryed to install another bootstack and now gives me Security Error and The Download Mode.
I thinked to take the device right to qUSB brick mode, following this tutorial: http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404. (I fixed QHUSB Brick , flashed boot.img and recovery.img like always did and got the same status of Phone , RebootLoop, Secure Error.
Tried KDZ, when uploading Failed to connect to the server. (" Take out batterry and put it on again , and retry ")
TOT, Gives me ERROR.
Try to go the tiddy way, updating to Stock, and it says i have the last update, btw the Software Version is OPTIMUSG3 V1.4.1 .
I follow every step and I can make it work. Im working arround Download Mode, but it fails always G2 D805.
Thanks in advance,
RumpDump
Fixed!
Download SRK Tools (Thank Guys)
1. Just Nuke Download Mode (when you are in download mode obviously) ( you can do it with SRK Fixed Settings.)
2.Then Reboot in Download Mode again and it will apear fastboot log console.
3 -Afterwords enter SRK Sub Fixed Settings and select the number 4 ( Via Fastboot ) it will jump u to recovery. (here you have to edit recovery.img , and the others depending on what version (I have 805v but I installed all 802v)
4- Install KK Bootloader, ROM, GAPPS (I didnt cuz i dont use them).
5- Reboot && Enjoy the rest of the day / night.

[
I have 802. I had every kind of error. Security error, qhusb error, no recovery, no download, even no boot. No phones opening.
Every time I succeed using this utility, it solved all kinds of errors.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076

yken said:
[
I have 802. I had every kind of error. Security error, qhusb error, no recovery, no download, even no boot. No phones opening.
Every time I succeed using this utility, it solved all kinds of errors.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
aleannes said:
utilizou a ferramenta srk tools 2.1, corrige arquivos automaticamente.
Click to expand...
Click to collapse
Thanks to all , I only used this tool to flash in the QHUSB softbrick, but doesnt drive me anywhere

JustOneFix.
Fixed!
Download SRK Tools (Thank Guys)
1. Just Nuke Download Mode (when you are in download mode obviously) ( you can do it with SRK Fixed Settings.)
2.Then Reboot in Download Mode again and it will apear fastboot log console.
3 -Afterwords enter SRK Sub Fixed Settings and select the number 4 ( Via Fastboot ) it will jump u to recovery. (here you have to edit recovery.img , and the others depending on what version (I have 805v but I installed all 802v)
4- Install KK Bootloader, ROM, GAPPS (I didnt cuz i dont use them).
5- Reboot && Enjoy the rest of the day / night.

I've used tools srk
RumpDump said:
Thanks to all , I only used this tool to flash in the QHUSB softbrick, but doesnt drive me anywhere
Click to expand...
Click to collapse
My last serious problem was with critical error, only test point decided, then used the srk to repair the files.

Android 7.1.1 Doogee X5PRO

I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip

Hi, and thank you, I already had downloaded the BETA3 version from needROM.com but it seems this is updgraded
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?

I've been using beta4 (and beta3 previously) for months and quite like them. Also, since the original factory rom is filled with adaware, isn't as up-to-date with Android's security patches and doesn't pass SafetyNet, you're gaining a lot and not losing anything switching or rooting for that matter.
Though I still prefer magisk over rooting since it's more secure and more than enough for adaway.
juancarloscuba said:
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
Click to expand...
Click to collapse
You can but you don't have to. I had a problem flashing beta4 and twrp at one go but booting the phone once with just beta4 and then powering off and flashing twrp and\or rooting afterwards solved that.
Btw, the dev is developing gesture modules for the kernel (built-in beta4) and an app to go with them: http://getbest.ru/kernel_gesture.htm I didn't find the feature useful enough to keep around but it works as advertised and, once again, magisk was enough.
Overall, the rom is an absolute must as far as I'm concerned and I wouldn't be using this phone if it wasn't available. It would have been nice if the dev could keepup with android's patches better but seeing how he's doing a better job than doogee and for free I can't really complain.

Do the camera and fingerprint work?

Hi. I wish to give my really thanks to the developer of this rom.
It solve my problems:
Stock rom R16:
sim card WIND (IT) poor 4G/LTE reception
sim card VODAFONE (IT) no 4G/LTE reception
(tested switching 1-2, various city zones)
This Rom:
both full 4G/LTE reception!!
M.A.

Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?

****_ve said:
I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!

The Seeker said:
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
Click to expand...
Click to collapse
Hi.
My phone (X5pro) hasn't fingerprint reader.
The camera seems to work in normal way.
M.A.
P.S.: May be it depends by my phone, but sometimes touch is not reponsive; I have to push the power button ("stand-by") and push it again to have normal touch response.
---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------
Racxie said:
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
Click to expand...
Click to collapse
The flash guide you linked is the right guide.
What exact model of phone you have?
Does the scatter and other files are in the same folder? (unzipped, you know).
Does the flashtool give any error message with the 32bit version?
Regards
M.A.

I tried both the 32bit and 64 bit versions of this rom, it's pretty good for a beta. However I had a problem with the screen going dark while using it and once the screen inverted colours randomly. Has anyone else had this problem with this rom? I'm currently using the android 6 stock rom but would love to get 7.1.1 working perfectly.

installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
Flashed from ubuntu linux 16.04:
Download Only option (should I have choosen Firmware Upgrade?)
Scatter-loading File MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (should I have choosen MT6735M_Android_scatter.txt?)
I had the bootloader locked in development options (had it to be open?)
I also had USB debugging ON
Any tips?

xe7um said:
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
.....
Any tips?
Click to expand...
Click to collapse
Hi.
Now I'm at home.
Tomorrow morning, when I'll be at office I'll write down steps by steps I did.
(home... office..., reverse of natural manner, because I do all my mobile hobbies at lunch pause; at home PC is used by others )

Hello, here I am.
The follows are the steps, more or less, that I did.
(maybe you already did some of these)
1-Start from official R16 ROM
2- Developer option
#a. Enable USB debug​#b. Enable OEM unlock​
3- Security: allow unknown origin installation
4- Unlock bootloader
#a. Connect in fastboot, from ADB command mode:​type: adb reboot-bootloader ___ (Wait 1-3 second)​type: fastboot devices ___ (verify device is detected)​#b. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: yes​= unlocked: no​#c. unlock bootloader​type: fastboot oem unlock ___ and you get​-> start unlock flow​---> on screen appear:​vol UP=Yes; void warranty, clear ALL data​vol DWN=no; no unlock​Press Vol UP​#d. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: no​= unlocked: yes​#e. May be phone restart​
5- shut down phone ___ AND ___ get out battery
6- Flash phone with
MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt​as per normal way (You know this , after some trying...)​
7- WITHOUT starting phone, ___ Flash TWRP with
MT6735M_TWRPx32_scatter.txt (or the 64, according to the ROM you flashed)​
9- Put battery in ___ AND___ start in TWRP recovery
#a. hold Vol Up, press ON button until appear a micro menu, release buttons​#b. choose recovery with Vol Up and confirm with Vol Down​
10- in recovery, choose wipe, and on bottom of the screen slide for factory reset
11- on TWRP main, choose reboot, power off
12- get out battery for some seconds
13- get in battery and start up (It can take a lot, may be leave the phone connected to main)
This is what I did (if I remember all the single steps...)
Try and report to us.
M.A.

Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo

xe7um said:
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
Click to expand...
Click to collapse
Hummmm....
It seems won't go in recovery mode, I think.
Try this:
1- flash entire stock ROM
(may be take this ===http://www.doogee.cc/bbs/viewtopic.php?t=29=== just in case)
2- start phone normal, up to home screen (so the phone is as just brougt)
3- power off and try to enter stock Recovery
If it works (and your bootloader is unloked) then try this
Connect phone to PC in fastboot
and enter
fastboot devices (I do this each time, just in case PC don't detect phone)
fastboot boot recovery.img
where recovery.img is your TWRP
The phone should start in TWRP recovery
The fastboot boot recovery.img command
send recovery (kernel?) image to temp phone folder/ram
and boot from that.
It unaffect normal rom/recovery.
By this step, we check If your phone accept this TWRP and sort out some possible troubles.
M.A.

when doing 'fastboot boot TWRP-3.1.1-X5PROx32.img' I get:
USB transferring...
USB transmission OK
and doesn't reboot into recovery but it boots normally
since I'm doing this from stock kernel R16 I wonder whether it's 32 or 64 bits
However I've found recovery-twrp-3.2.0-git-20171204.img that boots!. But I don't have scatter file, only .img! This recovery is from Lineage 14.1, but since this custom ROM installs from TWRP there is no need of scatter file

I've found another TWRP that boots with fastboot boot img: the TWRP recovery for 6.0 in needrom. This one has a scatter file

xe7um said:
I've found another TWRP that boots with fastboot boot img: https://www.needrom.com/wp-content/uploads/2016/12/TWRP_DG_X5Pro.rar
Click to expand...
Click to collapse
I get this error:
Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
Click to expand...
Click to collapse
Can you please link it correctly so we can download it?

The Seeker said:
I get this error:
Can you please link it correctly so we can download it?
Click to expand...
Click to collapse
Hi.
You have to select the file direct from the Needrom site.
www.needrom.com
(up)categories-doogee
on the right, click: Serial X
again, on the right, click: X5pro
and select the TWRP you desire.
(second line, second from left)
(click on "TWRP DG X5Pro (977 dls)")
Regards
M.A.
P.S.: even the link is
https://www.needrom.com/server/download.php?name=/2016/12/TWRP_DG_X5Pro.rar
you have to download from the site.

I'll try all this at the weekend, but my two cents are that it won't work. At first attempt I flashed BETA4 with MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (so no need to enter recovery and wipe cache/Dalvik) with a bootloop result.
My guess is that there are different ROM versions of X5 pro, and newest are incompatible with SnowcatPDA 7.1.1 firmware. Will see in a few days...

As I was suspecting I get a bootloop after logo. Now the question is: Is there a stable custom ROM (7.1 or newer) that I could use daily instead of MM 6.0 (R16) stock ROM?

[Guide] (2017.12.07update) How to root ur Mate9 oreo (emui 8.0)

First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
-----------------------2017.12.07 update---------------------------
sorry for so many needless steps of the old method.
root mate9 emui8 now only need 2 steps (so please neglect the old method).
new method:
1. reboot to fastboot mode . and fastboot flash recovery_ramdisk this
2. reboot to recovery mode. flash supersu 2.82 sr5 mod. (download link)
done!
ps: i have compared the "supersu 2.82 sr5 mod" to official supersu 2.82 sr5
the only different is:
the 683th line of file: "/META-INF/com/google/android/update-binary"
official package is : TRY="boot_a BOOT_A $TRY"
and the mod package is: TRY="ramdisk_a RAMDISK_A $TRY"
so the the mod package can be trusted i think.
that's all !
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
----------------------------------------------------------------
old method ( too many needless steps, please read the new method!):
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .

thanks very much!!!!!!

OP, How did u upgrade to oreo? I also have an AL00

Astra1 said:
OP, How did u upgrade to oreo? I also have an AL00
Click to expand...
Click to collapse
there are two posts told me how to update mate9 from nougat to oreo
1. https://romprovider.com/2017/11/update-emui-8-0-huawei-mate-9/
2. https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
notice:
a. the part of post 1 --"2.1 Method 1 using HWOTA Tool–" works on my mate9 Android N (emui 5.0) .
b. the part of post 2 --"Downgrade Nougat" works on my mate9, i succeed to downgrade to Nougat emui5.0 MHA-AL00C00B233.
c. the attachment of the post 1 seem to be designed to work on mate9 pro(because of the "LON") , so i modified the package to fit mate9. i don't know if it's neccessary.
i have wrote a guide，but it's in Chinese . 2rd floor (2#) of this post
Good Luck！

abbyvictor said:
First of all, sorry for my awesome English.i am praticing my writing
if u understand Chinese,congratulations!these is the Chinese version:
Notice:
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Phone is already Oreo firmware.
C. i cant guarantee these is no needless steps , but at least , i execute the steps from a to m, and i succeed to root my mate9 oreo {MHA-AL00 8.0.0.334(C00)}
Prepare:
1. FunkyHuawei Mate 10 Root/Rebranding tool (find lastest release here)
2. TWRP 3.1.1-0 for Mate 9/EMUI 8 (click me)
3. HWOTA8 Package ( get it from this post)
4、update_data_public.zip & update_all_hw.zip for the corresponding version you need (mine is MHA-AL00 8.0.0.334(C00), you can find wat u need at here)
5、supersu 2.82 SR5 (donwload link ,we only need the superuser.apk in /common.)
steps:
a. Unlock bootloader (backup all the data you need before this step)
b. Decompress the HWOTA8 Package on ur PC.
c. Copy the TWRP 3.1.1-0 to this folder (created by Decompression ),and rename this recovery img file (TWRP 3.1.1-0) to "TWRP8_3.0.3.img"
d. Connect ur mate9 to PC by USB cable and Use Vol-Dn +Power to boot into fastboot mode.
e. Use "Replace_Recovery.bat" in the folder (created by Decompression ) to flash TWRP recovery
f. Disconnect USB cable, use Vol-Up + Power to boot into TWRP
g. Format Data in TWRP, and connect USB cable again.
h. Reboot into fastboot mode .
i. Decompress FunkyHuawei Mate 10 Root/Rebranding tool Package on ur PC.
j. Run the "FHMate10Tool.exe" and choose Option 1 to root. and it will reboot later
k. Phone reboot ---> appare the warming interface ( it said:your device has been unlocked and cant trusted blablalba..... ) ---> appare the huawei welcoming interface -----> suddenly, phone reboot. notice!: please keep USB cable disconnecting from ur Phone. and after phone reboot suddenly , keep holding the Power + Vol up as fast as u can to reboot to recovery mode. (ps: why do we hold the keys as fast as u can? because it will prevent ur rebooting phone enter the huawei welcoming interface again. if the huawei welcoming interface appearing we cant execute the step l following)
l. flash the update_data_public.zip & update_all_hw.zip in TWRP. and reboot to system .
m. if supersu is not installed, please install supersu 2.82 SR5 manually.
the step k & l is not necessary,but recommended. because if you neglect them, u cant use the Theme( i am sure) and other.... important things (maybe) .
as the Chinese popular saying goes： 无图无真相！( no pictures! no truths ! )
but i dont know how to upload my picture, imgur?tumblr? anybody teach me?
HOPE THE ABOVE IS CLEAR.
GOOD LUCK
Click to expand...
Click to collapse
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app

Maheriraqi said:
how can me update my phone and i on oreo (C185log) i would like move it to (C636)
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!

abbyvictor said:
if nougat to oreo ,you should read this: https://romprovider.com/2017/11/upda...huawei-mate-9/
if oreo to higher version oreo OR oreo to nougat , you should read this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
these articles are very helpful!
Click to expand...
Click to collapse
Thank you, but I need to files twrp and how to install on the oreo 8
Sent from my [device_name] using XDA-Developers Legacy app

Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!

AlemSalleh said:
Its quite confusing at first. And I manage to make it works after 4 - 7 times repeating the process. To get that themes work. Thanks a lot.
I spend few days figure this out. Thanks!
Click to expand...
Click to collapse
It's my pleasure.
but i found this guide contains many redundant steps
i will simplify it later.....

viper4android for emui 8.0 ?

[No message]

hijibiji said:
viper4android for emui 8.0 ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2191223
no version for Oreo until now as i know

I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB

Flavio said:
I want to restore my Mate 9 to stock recovery and have used Huawei Update Extractor to extract the Oreo 1.9GB Update.app.
Which of the following files should I use to fastboot flash the stock recovery?
RECOVERY_RAMDIS.img 32MB
RECOVERY_VBMETA.img 6,93kB
RECOVERY_VENDOR.img 16MB
Click to expand...
Click to collapse
/recovery has a new name "recovery_ramdisk" in mate9 oreo
if you want to flash stock recovery , you should execute " fastboot flash recovery_ramdisk xxxxxxxxxxxxx.img" in fastboot mode.
"RECOVERY_RAMDIS" may be refer to "recovery_ramdisk", so try to execute " fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img" in fastboot mode.
i'm not sure.
gook luck!

Zui 3.1.117st qpst file for [z2131]/[z2132] Chinese [android N][qpst]

Download the latest stable Chinese rom qpst file for z2 plus which is qfil flashable.
i found these file on club.lenovo.com.cn after two days of searching. i have flashed it in my lenovo z2 plus and it is working very well. it can be flashed with the qfil or mi flash tool. Download the rom from the given link below and follow the steps to flash.
https://club.lenovo.com.cn/thread-4259783-1-1.html
or
http://s.bs.zui.com/E82d
Seps:-
1. Download the latest rom from the given link .
2. Extract it in the C drive within a folder having very simple name like 'new'.
3. Install the flashtool and other required drivers from the link below.
4. Boot the phone into EDL mode.
5.. Use qfil to flash the file in the phone.
[note:- all data will be wiped so be sure to take backup before flashing.]
To download and use the qfil and other drivers follow the link below
http://https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-to-recover-hard-bricked-zuk-z2-plus-t3576007.
HOW TO BOOT IS THE EDL MODE[9008 PORT]
follow the steps in the link.
For bricked phone(tricky).
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/reboot-to-edl9008-modetotally-bricked-t3720932
If your phone is alive the follow these steps(easy method).
1. Enable developer option.
2. Enable usb debuging option.
3. Install latest adb driver from here.
4. Go to the directory where the adb driver is installed and inside the adb folder press shift and right click at the same time and then click on the option open command window here,
5. Type 'adb devices' these will pop a message in your phone accept it.now in the command window your device will be displayed.
6. Now type 'adb reboot edl' these command will reboot your device in the edl mode or 9008 port.
now every thing is wiped.
After first boot how to reach the home page and change the language of the phone.
just use the blue option at the top right corner of the screen and some common sense to reach the home screen.these will take you to the home screen every thing here is in the Chinese language so now we have to change it to English to do this follow the images.

Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?

RajuMon said:
Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?
Click to expand...
Click to collapse
It's a pretty old ROM now.
There is 3.5 QPST available. Even that too would receive official OTA builds as the latest for Z2 Plus is 4.0.xxx
Thanks.

Can I flash a Chinese rom in z2 plus and relock the bootloader?

RajuMon said:
Can I flash a Chinese rom in z2 plus and relock the bootloader?
Click to expand...
Click to collapse
Yes official Chinese room flashing can relock the bootloader

Thanks, mate this is the answer what I'm looking for:laugh:

I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me

hilarioustiwari said:
I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me
Click to expand...
Click to collapse
Do you connect your phone to 9008 port

What to do when you're stuck in EDL-Mode (black screen = no fastboot - no recovery)

Probably you have the Anti-Rollback activated and tried to flash another ROM. After a successful installation your phone just went dead.
Here's how you could fix it (or how I fixed it):
1. Windows PC with MiFlash Beta (!) tool
2. Download a Xiaomi Fastboot Rom (ends with *.tgz)
http://bigota.d.miui.com/8.8.30/nitrogen_images_8.8.30_20180830.0000.00_8.1_cn_66dfc4bb58.tgz
--> Beta (MIUI 10 8.8.30) (ANTI ROLL-BACK ACTIVATED!!!)
3. extract Rom to your PC
4. start MiFlash Beta tool and point to the extracted folder
5. press Vol+ & Vol- & Power on your MiMax3 for 10 seconds and connect it to your PC while holding the buttons another second after plugging it in
6. press refresh button on MiFlash tool
7. if your drivers are installed correct, your phone should be visible on COM-Port XXX
8. press flash and hopefully it will be flashed
9. if not: try several times
10. wait until it boots to the welcome screen (around 5 mins)
now your phone should be useable again.
If you want Treble-Rom to be installed, then go on:
11. turn phone off --> go into fastboot mode (Vol- & Power) --> install TWRP --> boot into TWRP
12. wipe date = yes --> reboot TWRP
13. make yourself a MiRom at https://mi-globe.com/rom-builder-features/?codename=nitrogen&img=mimax3.png&realname=Mi+Max+3
--> I used 8.8.30 version, and choose "advanced settings"--> set Magisk for root and build your zip
14. flash it through TWRP
15. reboot --> you will end up in a bootloop, but thats okay
16. go back to TWRP: swipe factory reset
17. install treble.img + gapps + Magisk and reboot and you're all good

thanks a lot! but i m in a different situation now!
i have baught the device from local store with so called fake rom. and as per some instruction found at different forums i have successfully flashed china developper rom, and than flashed again eu rom. the version was miui 10 8.8.30. some how, i was trying to install a gcam mod mistakenly wich was originally for mi a1, and the mobile suddenly stuck on "the system has been destroyed!" mode. i can eventually come to fastboot mode from this screen, but cannot flash rom, as it says now, it is locked. dont have the right to erase. so, i tried miflash unlock with my mi account, but it says current account is not bound to this device. even, i can't go to edl, so what is happening now, i m totally nobis here.
can some one help me. please? how can i achive unlock in this situation or how could i get rid of this and reboot to system?

So there is a way to recover the phone if you brick if from installing a firmware after having anti-rollback?

yes, but the anti-rollback will be still activated. You can flash the China Roms or a treble ROM as described. If you try to flash the EU Rom you will boot into the EDL mode without any warnings.

I need help.
The post in #1 doesnt work for me.
I have also tried a many of miflash beta; all not work.
I become always the info "can not open port ..."

didi_m said:
I need help.
The post in #1 doesnt work for me.
I have also tried a many of miflash beta; all not work.
I become always the info "can not open port ..."
Click to expand...
Click to collapse
The method does work!
You need to re-activate the EDL mode in a split second of accuracy and timing by luck!
Keep trying! Your finger has got to very very fast to hit the "Flash" in MiFlash tool in relation to the process of entering he EDL mode!
I was on China Beta 8.8.30 (ARB) and I tried miflashtool to China Stable 9.6.11.0 (Non-ARB) and my phone bricked with blank screen. Could not power on at all, and not even into the Fastboot mode.
You have to miflashtool to ARB version of China Stable 9.6.12.0 to be able to success.

Hi,
I see the com port.
It begin to flash, put then the Error: Only nop and sig tag can be recevied before authentication.

didi_m said:
Hi,
I see the com port.
It begin to flash, put then the Error: Only nop and sig tag can be recevied before authentication.
Click to expand...
Click to collapse
I see. No problem.
In that case. Don't use 9.6.11.0 to miflash.
Please use the 9.6.7.0 and retry to miflash again.
9.6.7.0 should work.

I think 9.6.12 is the wright rom.
Why now 9.6.7.0.
Have you i link for me for this rom.
Is 9.6.7.0 without ARB.
Sorry for my bad english.

didi_m said:
I think 9.6.12 is the wright rom.
Why now 9.6.7.0.
Have you i link for me for this rom.
Is 9.6.7.0 without ARB.
Sorry for my bad english.
Click to expand...
Click to collapse
This is because you would probably get the same error massages as with 9.6.11.0 if you miflash to 9.6.12.0 ARB directly and even though some users might be able to miflash to 9.6.12.0 directly without the error massages
Therefore, Miflash using 9.6.7.0 Non-ARB first, and if you wanna update to 9.6.12.0 ARB. You can just do it via the Updater! This is the best and safest way to do it!
Grab the 9.6.7.0 now ...... I mean NOW!!!!!!!! before it is unlisted by Xiaomi for users to download as it is a damn old freaking rom!!!!!!!!!
UNLESS.... 9.6.7.0 failed as well! Then, you have to miflash to 9.6.12.0 directly as a last option and pray it works!
http://bigota.d.miui.com/V9.6.7.0.O...EDCNFD_20180705.0000.00_8.1_cn_7c9a1a57f8.tgz

I only found the zip Version.
I need for myflash the tgz Version.
Have you a link to this Version ?
---------- Post added at 09:08 AM ---------- Previous post was at 09:07 AM ----------
thanks, you ar quicklier.

didi_m said:
I only found the zip Version.
I need for myflash the tgz Version.
Have you a link to this Version ?
---------- Post added at 09:08 AM ---------- Previous post was at 09:07 AM ----------
thanks, you ar quicklier.
Click to expand...
Click to collapse
UNLESS....miflashing to 9.6.7.0 failed as well! Then, you have no choice but to miflash to 9.6.12.0 directly and pray that it works with your version of miflash tool and pc.
Good Luck!

by flash 9.6.7.0 it comes every one "can not read from com port"
9.6.12 dosnt go to.
Here he want a authorizierd mi account.
whoats now ?
Does anyone share his authorized account with me?
thanks

didi_m said:
by flash 9.6.7.0 it comes every one "can not read from com port"
9.6.12 dosnt go to.
Here he want a authorizierd mi account.
whoats now ?
Does anyone share his authorized account with me?
thanks
Click to expand...
Click to collapse
Your Mi account has been locked by Xiaomi! OMG!
If so, then. No one can help you except you taking a flight to China and take a Q number at China Xiaomi service centre..
No one is dare enough to share his Mi account with you because arb is hardware "coded" so to speak. . It can cause his Mi account to be locked by Xiaomi too using it on your Mi Max 3 . '(
For my similar case, my Mi account has not been locked by Xiaomi.

I had the same issue
silentext said:
thanks a lot! but i m in a different situation now!
i have baught the device from local store with so called fake rom. and as per some instruction found at different forums i have successfully flashed china developper rom, and than flashed again eu rom. the version was miui 10 8.8.30. some how, i was trying to install a gcam mod mistakenly wich was originally for mi a1, and the mobile suddenly stuck on "the system has been destroyed!" mode. i can eventually come to fastboot mode from this screen, but cannot flash rom, as it says now, it is locked. dont have the right to erase. so, i tried miflash unlock with my mi account, but it says current account is not bound to this device. even, i can't go to edl, so what is happening now, i m totally nobis here.
can some one help me. please? how can i achive unlock in this situation or how could i get rid of this and reboot to system?
Click to expand...
Click to collapse
I had the same issue and i opened the phone and did the test point to enter to edl mode and flashed the chinese miui 10 stable rom , and now i have to wait 720 hours to unlock the bootloader to flash twrp and a global rom

So I just helped someone boot successfully to 10.0.1.0 global stable fastboot whose phone got bricked trying to flash 8.8.9 eu (maybe he had ARB but didn't know it). It was the black screen of death basically as noted here. TEST-POINT METHOD WAS NOT NEEDED.
Follow these steps:
1) Download Global Stable fastboot 10.0.1.0 from this thread: https://forum.xda-developers.com/mi...icial-recovery-fastboot-roms-mi-t3827503/amp/
2) Open MiFlashTool and navigate to 10.0.1.0 fastboot rom. At the bottom select 'Clean All Only' (do NOT select clean all and lock).
3) Hold power, volume up and volume down together for 10 seconds after plugging into PC. Your pc should detect your phone in EDL mode. Hit REFRESH button at the top of MiFlashTool and it will show up as COM XX or XXX for your USB connection. Try whichever USB port works. Then hit refresh. Then click Flash.
4) It should boot. If it doesn't and you get stuck on the Mi Recovery screen. Select Wipe Data. It should boot you back into the recovery again where you'll see Reboot, Wipe Data or Connect Using Mi Assistant. From here, get back to fastboot mode by holding Power and Volume Down together until you see the bunny fastboot screen.
5) Open or refresh MiFlashTool again and select 10.0.1.0 fastboot rom (it should remember from previous selection). At the bottom select 'Clean All Only' (do NOT select clean all and lock). Hit REFRESH button at the top and this time it will show your device number like normal instead of COM. Click Flash.
6) Phone will reboot on its own to Miui 10 Global login screen. Setup your phone from there.

mi max 3 hard brick
opasha said:
So I just helped someone boot successfully to 10.0.1.0 global stable fastboot whose phone got bricked trying to flash 8.8.9 eu (maybe he had ARB but didn't know it). It was the black screen of death basically as noted here. TEST-POINT METHOD WAS NOT NEEDED.
Follow these steps:
1) Download Global Stable fastboot 10.0.1.0 from this thread: https://forum.xda-developers.com/mi...icial-recovery-fastboot-roms-mi-t3827503/amp/
2) Open MiFlashTool and navigate to 10.0.1.0 fastboot rom. At the bottom select 'Clean All Only' (do NOT select clean all and lock).
3) Hold power, volume up and volume down together for 10 seconds after plugging into PC. Your pc should detect your phone in EDL mode. Hit REFRESH button at the top of MiFlashTool and it will show up as COM XX or XXX for your USB connection. Try whichever USB port works. Then hit refresh. Then click Flash.
4) It should boot. If it doesn't and you get stuck on the Mi Recovery screen. Select Wipe Data. It should boot you back into the recovery again where you'll see Reboot, Wipe Data or Connect Using Mi Assistant. From here, get back to fastboot mode by holding Power and Volume Down together until you see the bunny fastboot screen.
5) Open or refresh MiFlashTool again and select 10.0.1.0 fastboot rom (it should remember from previous selection). At the bottom select 'Clean All Only' (do NOT select clean all and lock). Hit REFRESH button at the top and this time it will show your device number like normal instead of COM. Click Flash.
6) Phone will reboot on its own to Miui 10 Global login screen. Setup your phone from there.
Click to expand...
Click to collapse
WIl l be able to go back to xiaomi eu room after that ?
thanks
---------- Post added at 01:39 PM ---------- Previous post was at 12:53 PM ----------
didi_m said:
by flash 9.6.7.0 it comes every one "can not read from com port"
9.6.12 dosnt go to.
Here he want a authorizierd mi account.
whoats now ?
Does anyone share his authorized account with me?
thanks
Click to expand...
Click to collapse
hi..you get the error message ("cannot read...") because there must be space in you directory path somewhere ....remove all spaces in any directory path... it works like a charm.. i used the global stable rom mentioned below V10.0.1.0.OEDMIFH/nitrogen_global_images_V10.0.1.0.OEDMIFH_20181012.0000.00_8.1_global_159a03b105.tgz
---------- Post added at 01:46 PM ---------- Previous post was at 01:39 PM ----------
didi_m said:
by flash 9.6.7.0 it comes every one "can not read from com port"
9.6.12 dosnt go to.
Here he want a authorizierd mi account.
whoats now ?
Does anyone share his authorized account with me?
thanks
Click to expand...
Click to collapse
hi..you get the error message ("cannot read...") because there must be space in you directory path somewhere ....remove all spaces in any directory path... it works like a charm.. i used the global stable rom mentioned below nitrogen_global_images_V10.0.1.0.OEDMIFH_20181012.0000.00_8.1_global_159a03b105.tgz

vikram237 said:
WIl l be able to go back to xiaomi eu room after that ?
thanks
Click to expand...
Click to collapse
There is no ARB on xiaomi.eu roms (except maybe 8.8.30 as omer919 stated).

The real brick solution by ARB, it works for mi max 3 too.
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
and this is the ARB in Mi MAX 3.
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503

I had that one. Please charge up your Mobile for at least %100, lt will reboot.