heyif youve rooted this I was wondering if you could send me whatever is in the /sys/kernel file my phone wont initialize hdmi it keeps saying
error: cannot open /sys/kernel/hdmi_sii_kset/hdmi_sii_state_kobj/hdmi_sii_state_obj
so im thinking if I get that file my hdmi will work im on a stock rom , maybe cwm flashing doesnt keep this file however i cannot just repair the firmare as this is a debug phone with debug software according to this site : https://tthtlc.wordpress.com/2011/12...-xperia-arc-s/ i should have the file in my sys/kernel so if you could send it to me id love you forever lol this has been driving me nuts
Related
I'm trying to upgrade my ROM version, and I have downloaded OSimage Tool and XDATool Kit.
I put the nb1 file for the source and the device memory (via programme a) for the desitination.
When I run the program I get the following error:
"Programme A not found - run with '--register'
error opening target device"
I have looked for hours now trying to find out how to get this --register thing to work. Can someone help me out? Thanks!
Come on, I know 85% of the people on this forum know how to upgrade the ROM version.
Can someone please help, I need it very badly! Thanks.
you could always use the sd card method thats how most people flash their xda1's
Well I had a huge problem figuring out the SD card method, but I finally did! Thanks.
Hi Guys,
I have a remote control that I would like to extract the ROM from.
The remote is a NevoSL, it is a WinCE.net device. I have looked everywhere for info about doing this but haven't found anytools that work.
Right now it runs a stripped down O/S image. I have a full CE.net image to load to it but I want to make sure that I can restore it back if I run into a problem. I have the lastest upgrade image for the device however I can't get it to load with MS device emulator.
Thanks in advance.
Have you googled around? I imagine someone's already done it.
What connection options does it have?
V
I have googled and googled.
It's a USB connection. It also has Wi-Fi.
I have gotten it to stop loading the remote software and I can get into the directories, and run some programs on it. However I think it's missing a major chuck of the O/S. Almost every program I have installed will not run. I have got it to connect to my wireless network.
All I want to do is get a webrowser on it.
I have tried to install MiniMon but it will not run.
Best bet might be to download Platform SDK and compile a mini CE build. Grab Internet Explorer from there and see what that does.
What kind of errors do you get?
V
I thing I'm worried about is erasing the factory Nevo bootloader and not being able to restore the device back to it's orginal state. I really don't want to have a 900 dollar brick.
With Minimo I get a "Cannot find minimo_runner ( or one of it's componets) error. It's the same error with almost any software I have tried to run.
Hello All,
i've Motorola i920 Smartphone bases mobile , i try to install and run Cert.cab, Cert_SPCB.cab , EnableRapi.cab and any other application i try to install but every time im getting error that appilcation not digitally signed even i used Remote Register Editor (http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx) but still no solution, i can't open HKLM to edit the registery setting always getting errors, so can anyone help me, i am using IR port because i don't have USB cable for this model,
Any help will be appriciated.
Take Care
ENJOY
Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx
If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300
THX!
I will try ... downloading ...
So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...
I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(
Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.
YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415
so it´s over ... i send the phone back ...
Thank u very much 4 helping.
Hey
so I'm having issues with sending files over Wifi Direct to another phone.
S-Beam works perfectly fine, so I can send an image, video to the other person.
File transfers e.g. PDF, Zip. Songs etc work fine from the other person's phone to mine
But when I send files to the other person's phone they get a prompt asking them to accept/reject the file and they press "accept".
my phone say connected and his phone say connected.
but is loading and loading
and do nothing..
Has anyone else experienced this or have any idea what might resolve it?
*Sending files over Bluetooth works fine, however this is a lot slower.*
I am having problems with wifi direct on NG1. My friend is on the same rom with the same device, we can find eachother and connect. But when we try and send a file it says connecting for a while then fails, nothing comes up on the other device.
celderic said:
I am having problems with wifi direct on NG1. My friend is on the same rom with the same device, we can find eachother and connect. But when we try and send a file it says connecting for a while then fails, nothing comes up on the other device.
Click to expand...
Click to collapse
Exactly the same problem here. NG1 Stock ROM with some debloat. Says connected at first and when I try to send the file it just says Connecting...
celderic said:
I am having problems with wifi direct on NG1. My friend is on the same rom with the same device, we can find eachother and connect. But when we try and send a file it says connecting for a while then fails, nothing comes up on the other device.
Click to expand...
Click to collapse
DisturbedPL said:
Exactly the same problem here. NG1 Stock ROM with some debloat. Says connected at first and when I try to send the file it just says Connecting...
Click to expand...
Click to collapse
no way to fix it?