Odin "complete(write) operation failed" when rooting - Samsung Galaxy S8 Questions and Answers

I'm trying to use PartCyborgRom on my Galaxy S8 SM-G950U USA version. When I first clicked start in Odin, it said, "complete(write) operation failed". Following that I get a blue screen that says something along the lines of update failed. If I flash part 2 it will let me go back into download mode but the cycle repeats. So far I have used two different computers (with the Samsung drivers installed), at least 2 USB 2 and 3 ports (I know it says not to use 3 but I wanted to see if anything changed), and 2 different cables. I've seen other threads where people say to keep trying while leaving Odin open, etc but none of that has worked either. Does anyone know what the cause could be?

QuantumPie said:
I'm trying to use PartCyborgRom on my Galaxy S8 SM-G950U USA version. When I first clicked start in Odin, it said, "complete(write) operation failed". Following that I get a blue screen that says something along the lines of update failed. If I flash part 2 it will let me go back into download mode but the cycle repeats. So far I have used two different computers (with the Samsung drivers installed), at least 2 USB 2 and 3 ports (I know it says not to use 3 but I wanted to see if anything changed), and 2 different cables. I've seen other threads where people say to keep trying while leaving Odin open, etc but none of that has worked either. Does anyone know what the cause could be?
Click to expand...
Click to collapse
You need to read a bit better and you would see that most of the errors you received are normal
What bootloader revision is your device on. 5th number from end is bootloader revision
Try to read a bit better and search the thread. All is answered there. There will be failures but some are normal and needed for this root method to work

TheMadScientist said:
You need to read a bit better and you would see that most of the errors you received are normal
What bootloader revision is your device on. 5th number from end is bootloader revision
Try to read a bit better and search the thread. All is answered there. There will be failures but some are normal and needed for this root method to work
Click to expand...
Click to collapse
Just realized I could search for keywords in a thread a few minutes ago.
I'm no longer sure but I'm guessing it was past 2. If that is the case, is there any way I can root?

QuantumPie said:
Just realized I could search for keywords in a thread a few minutes ago.
I'm no longer sure but I'm guessing it was past 2. If that is the case, is there any way I can root?
Click to expand...
Click to collapse
I didn't mean to sound like a arse. This root method can be tricky is why I say read read read. A lot of people miss the section of upload mode errors and device software unauthorized screen
What is the current firmware on the device.
If you don't see like a secure check fail. Binary or something you should be good. Which would be displayed in download mode screen. And Odin would fail right off

I'm now back to stock with a v5 bootloader. I'm trying to follow this method but I am getting a "Re-Partition operation failed" error even though I don't have that option ticked. Do I need it ticked or have to use the pit file? I can't get a clear sense of what the pit file does from my googling.

TheMadScientist said:
I didn't mean to sound like a arse. This root method can be tricky is why I say read read read. A lot of people miss the section of upload mode errors and device software unauthorized screen
What is the current firmware on the device.
If you don't see like a secure check fail. Binary or something you should be good. Which would be displayed in download mode screen. And Odin would fail right off
Click to expand...
Click to collapse
I'm now back to stock with a v5 bootloader. I'm trying to follow this method but I am getting a "Re-Partition operation failed" error even though I don't have that option ticked. Do I need it ticked or have to use the pit file? I can't get a clear sense of what the pit file does from my googling.
(Sorry for double posting. I wasn't sure if you get a notification without me replying to you)

QuantumPie said:
I'm now back to stock with a v5 bootloader. I'm trying to follow this method but I am getting a "Re-Partition operation failed" error even though I don't have that option ticked. Do I need it ticked or have to use the pit file? I can't get a clear sense of what the pit file does from my googling.
(Sorry for double posting. I wasn't sure if you get a notification without me replying to you)
Click to expand...
Click to collapse
V5 is unrootsble and no downgrade. You might as well find a new device if you need root

Related

Black Screen Vibrant

Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.
i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.
files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.
have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..
somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours
Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App
Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.
Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol
This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.
mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution

[Q] [Soft Brick] At&t Samsung Galaxy 4S (MF3/4.2.2/SGH-I337) [[[HELP PLEASE]]]

Hi guys, I'm new to this site. I have a specific problem that I can't seem to find the answer for.
My phone: At&t Samsung Galaxy S4 (I made a typo in the title... )
Model: SGH-I337
I had MF3 version/4.2.2
I used various threads to eventually root my phone.
I was very happy.
I had to use safestrap
I was happy with safestrap
I had my stock in the stock rom slot
I had [ROM] Google Edition 4.3 [Clean][Deodex][276MB][2013.11.21] in first slot.
I was very happy with it.
Here is the thread http://forum.xda-developers.com/showthread.php?p=47718525#post47718525
I made a stupid move when I was finally done, I had my phone rooted, I had everything I needed, but it wasn't enough...
I did something in the mount options area in safestrap.. switched my sd to internal memory
My phone has been in a boot loop ever since on Samsung Image
I had Slot 1 active when this happened.
When I'm in recovery mode, all the options, including wipe data/factory reset doesn't work
I tried using a pit file in Odin to fix/failed
I tried using Odin 3.09 with stock firmware I found in some threads to try and get factory/failed
I get this in Odin along with fail "All threads completed. (succeed 0 / failed 1)"
I really want to fix my phone.
Preferably I would like it to stay as mf3
Does anyone have a solution?
A link to a thread I missed?
Something more recent?
I also tried Kies, but it was giving me trouble, I'll try it again as a last resort.
I hope there's a solution. ​
Kies 3
Kies 3 didn't work as well with emergency upgrade.
worried
joeydija said:
Kies 3 didn't work as well with emergency upgrade.
Click to expand...
Click to collapse
SW Rev Check Fail fused 2 Binary 1
Whoa.
Here is the solution!
Place all files found in the zip he gives in Odin 3.09
Top - BL
Bottom - CSC
http://forum.xda-developers.com/showthread.php?t=2716482
Makes sense, makes sense?
WOWza, very happy.
:good:
I spoke too soon.
joeydija said:
Here is the solution!
Place all files found in the zip he gives in Odin 3.09
Top - BL
Bottom - CSC
http://forum.xda-developers.com/showthread.php?t=2716482
Makes sense, makes sense?
WOWza, very happy.
:good:
Click to expand...
Click to collapse
Failed at the end.. I guess that's not the right order.. farthest I've got so far though, now when I boot I see Odin.
[Not the God]
hoorah!
The solution. FINALLY.
The file order goes like this...
AP gets the biggest file size
The one that starts with Base Loader goes in BL
The one that starts with CSC goes in CSC
The last one goes in CP
[solved] happy
joeydija said:
The solution. FINALLY.
The file order goes like this...
AP gets the biggest file size
The one that starts with Base Loader goes in BL
The one that starts with CSC goes in CSC
The last one goes in CP
[solved] happy
Click to expand...
Click to collapse
Hey man, can I get a mirror to the files you used? I have the SAME EXACT ISSUE! Please and thanks!
of course
SnowDot said:
Hey man, can I get a mirror to the files you used? I have the SAME EXACT ISSUE! Please and thanks!
Click to expand...
Click to collapse
Download link: https://mega.co.nz/#!MwAhlDyC!UOnkMFsUSctakHRfE1Mr95c1ymVwy1wBPu2yiPerros
If you've never used this site before
It's kind of weird
Press the DOWNLOAD button, it's RED
Wait for 100%
When you reach 100% it either starts downloading by itself or you press the download symbol
Good luck!
Summon odin
SnowDot said:
Hey man, can I get a mirror to the files you used? I have the SAME EXACT ISSUE! Please and thanks!
Click to expand...
Click to collapse
Also, you can find Odin3 v3.09 here: https://www.androidfilehost.com/?fid=23321874045862094
Remember to run Odin3 v3.09 as administrator
Right click Odin3 v3.09, press Run as administrator
Make sure you have your USB connected to back of computer
Take out battery from device
Place battery back in
Hold Volume Down + Home Button + Power Button
When you see WARNING! press Volume Up
Plug in USB
Wait for Odin3 v3.09 to recognize your phone
Leave all default settings
Place files from mf3. Tar in slots
Press START and wait 5 minutes
Good luck!
Another Soft Bricked SGH-I337...
joeydija said:
Also, you can find Odin3 v3.09 here: https://www.androidfilehost.com/?fid=23321874045862094
Remember to run Odin3 v3.09 as administrator
Right click Odin3 v3.09, press Run as administrator
Make sure you have your USB connected to back of computer
Take out battery from device
Place battery back in
Hold Volume Down + Home Button + Power Button
When you see WARNING! press Volume Up
Plug in USB
Wait for Odin3 v3.09 to recognize your phone
Leave all default settings
Place files from mf3. Tar in slots
Press START and wait 5 minutes
Good luck!
Click to expand...
Click to collapse
Joey, thanks for the resources as there are so many broken links out there.
I'm having the same issue; however, I'm finding very little success flashing with Odin to return back to stock.
Following the same steps you've outlined above, I receive a the following from Odin:
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and the following from the prompt on the S4 screen:
SW REV. CHECK FAIL : fused : 4, Binary : 2
Click to expand...
Click to collapse
I've tried multiple prescribed methods, including the one you outlined, using Kies, and using nkhater's method for Unbricking I337 posted here.
I'm not entirely sure what steps to take next but any thoughts would be greatly appreciated.
mythandier said:
Joey, thanks for the resources as there are so many broken links out there.
I'm having the same issue; however, I'm finding very little success flashing with Odin to return back to stock.
Following the same steps you've outlined above, I receive a the following from Odin:
and the following from the prompt on the S4 screen:
I've tried multiple prescribed methods, including the one you outlined, using Kies, and using nkhater's method for Unbricking I337 posted here.
I'm not entirely sure what steps to take next but any thoughts would be greatly appreciated.
Click to expand...
Click to collapse
The SW REV. CHECK FAIL : fused : 4, Binary : 2 error means you are trying to flash an earlier version than your phone had before. You'll need to flash the same version you were using before, either MK2 or NB1. You can find the ODIN TAR files for them in the General section.
777
DeadlySin9 said:
The SW REV. CHECK FAIL : fused : 4, Binary : 2 error means you are trying to flash an earlier version than your phone had before. You'll need to flash the same version you were using before, either MK2 or NB1. You can find the ODIN TAR files for them in the General section.
Click to expand...
Click to collapse
Thanks for helping that guy out,
I have a question...
What ROM would you recommend for a 4.2.2 MF3 At&t Galaxy S4 SGH-I337?
I've been using the ROM found in here.
I am new to the rooted world.
It's the first ROM I tried and I love it.
I can go a whole day with, at most, losing 25% battery life.
I love the minimalist aspects of it.
I don't know how to keep track of new ROMs for my build though.
I don't really want to change ROMs at the moment, because I have everything I need with this one,
but if you can give me some cool advice, that would be awesome.
Any help, information, would be appreciated.
-Joey

[Q] Galaxy S5 Bootloop

Before marking this as a duplicate, please note that I've gone through almost every thread on this and different possibilities, but nothing had worked.
This morning, I rooted my AT&T Samsung Galaxy S5 (US) using towelroot. The root was successful. Next I downloaded Superuser from the Play Store (not the Chainfire one). It said it needed to update something using recovery mode, but it failed with an error. So, I ignored it and continued using the phone. Next, I downloaded the Google Now Launcher from Android L, to get Material Design. I installed Sliding Explorer from the Play Store to access root files. I also got a simple text edit app. To get Material Design, I needed to change ro.build.version.codename=REL to =L in build.prop. When I did and tried to save, it said access denied, so I changed permissions (oops!) to allow the file to be saved. Still didn't work for some reason so I saved the file as build.prop somewhere else and cut and pasted it in. Then, I rebooted my device and it got stuck on the boot screen with the Samsung Galaxy S5 logo with powered by Android beneath it.
What I've tried:
- I have wiped data, the cached, but there is no advanced option for me to wipe dalvik in the stock recovery for the Galaxy S5.
- When I try to use ADB, my device shows up as sideload and sideloading a ROM goes to 100% but ends up in an error. I cannot run ADB Shell, which ends in error:close.
- Using Odinv3 Build 3.09, I think, gets stuck on connecting to the phone, while Odinv3 Build 1.85, I think, gets fails at Complete(Write) error after something to do with NAND write.
My device drivers are all updated, and I've tried different USB ports, even different PC's. Nothing works. How can I fix this? Thanks!
I am allergic to posts that use Urgent in the title. Obviously you'd like to regain use of your phone ASAP. But how that makes your post more important than someone else's is a mystery. Nevertheless, I'm sure that someone else will be along soon to help you.
If you don't find something more expedient, the most reliable solution for a non-bricked phone is to Odin flash a full, stock firmware image that matches your baseband version.
.
fffft said:
I am allergic to posts that use Urgent in the title. Obviously you'd like to regain use of your phone ASAP. But how that makes your post more important than someone else's is a mystery. Nevertheless, I'm sure that someone else will be along soon to help you.
If you don't find something more expedient, the most reliable solution for a non-bricked phone is to Odin flash a full, stock firmware image that matches your baseband version.
.
Click to expand...
Click to collapse
Problem is, as I said, Odin has errors every time I try to flash, different ports and even different PC's. Maybe I'm not doing it correctly? And I'm sure I get the correct version.
Sorry for the Urgent ?.
tforkan99 said:
Problem is, as I said, Odin has errors every time I try to flash, different ports and even different PC's. Maybe I'm not doing it correctly? And I'm sure I get the correct version.
Sorry for the Urgent ?.
Click to expand...
Click to collapse
You've made some ill advised mods. Now we need more information. Post as many details as you can so that we can spot were the exact problem is.
Paste the exact error from both Odin vetsions here.
Is this originally an ATT phone?
Regular model (i.e. not the special unlocked Developer version)?
Do you know if it the new re-activation lock feature is enabled?
Do you know the phone's baseband /exact firmware version?
Do you have a recent backup?
Are you still able to boot to recovery mode (vol up + home + power)?
Did you ever successfully use Odin with this phone before the bootloop happened?
Perhaps you could remove the Urgent from your title? Edit /Delete > Go Advanced
.
fffft said:
You've made some ill advised mods. Now we need more information. Post as many details as you can so that we can spot were the exact problem is.
Paste the exact error from both Odin vetsions here.
Is this originally an ATT phone?
Regular model (i.e. not the special unlocked Developer version)?
Do you know if it the new re-activation lock feature is enabled?
Do you know the phone's baseband /exact firmware version?
Do you have a recent backup?
Are you still able to boot to recovery mode (vol up + home + power)?
Did you ever successfully use Odin with this phone before the bootloop happened?
Perhaps you could remove the Urgent from your title? Edit /Delete > Go Advanced
.
Click to expand...
Click to collapse
Odin3 v3.09: Stuck on "SetupConnection"
Odin3 v1.85:
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Yes, originally ATT
Regular model
Don't know about re-activation lock
I think the firmware version is the problem. The last update was the one from ATT that added Yellowpages and Lookout in May. Don't know version. I've been download an April build so maybe that's why there is an error. My phone says "SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1" which apparently occurs when downgrading. Maybe if I can get an updated ROM, I can use Odin? And I've seen suggestions to use Odin3 v3.04, but same error with the April build. I can't find the May build anywhere.
Maybe this will work?:http://forum.xda-developers.com/showthread.php?t=2737257 But it's .zip and I can't flash it with Odin.
I have a Kies backup, that's it. This always happens to me . I'm always too lazy to back up my devices.....
Yes recovery mode works and I can get into ADB Sideload.
Nope, never used Odin before. never tried.
I may have something here!
http://forum.xda-developers.com/showthread.php?t=2785185
My firmware is G900AUCU2AND3.
I will update after following the guide.
It works! The only thread that I needed in the world and I couldn't find until after I wiped my device....
Device successfully restored to functionality.
tforkan99 said:
Device successfully restored to functionality.
Click to expand...
Click to collapse
Great to hear.
As I commented at the outset, all you needed to do was restore a full, stock firmware image to recover. Ideally one that matches your existing baseband. Which is essentially what that thread did. Collected all of the pieces to do a 100% reversion to stock.
I've written similar posts for Verizon and TMobile. Was in fact just rewriting the Verizon one for you when you updated the thread. Anyway, good work. Give yourself a pat on that back and promise to make more backups this time.
.
Ego?
fffft said:
I am allergic to posts that use Urgent in the title. Obviously you'd like to regain use of your phone ASAP. But how that makes your post more important than someone else's is a mystery. Nevertheless, I'm sure that someone else will be along soon to help you.
If you don't find something more expedient, the most reliable solution for a non-bricked phone is to Odin flash a full, stock firmware image that matches your baseband version.
.
Click to expand...
Click to collapse
I'm allergic to egocentric attitudes when it comes to answers in a Q & A thread.
tforkan99 said:
It works! The only thread that I needed in the world and I couldn't find until after I wiped my device....
Device successfully restored to functionality.
Click to expand...
Click to collapse
Happy to hear it that worked out for you!

FRP Lock, unable to be flashed onto, and no SIM card

I seem to be stuck in a pickle, and at this rate this phone is seeing a swift throw to the curb by my friend who had given me this phone after getting his new one.
So, he had given me the phone and I was glad to finally move on from my issue-ridden HTC One M8, which was essentially on it's last legs. Even this low quality phone was more usable than the piece of junk I have. I got to work, and I installed the RebornROM, and I had went ahead to delete some of the bloatware.
However, it seems that my dumb self removed a Samsung app, and it seems to have triggered the FRP lock. I didn't think it was a big deal, seeing as how reverting back to stock was apparently most people's fix. I saw the Realterm fix, however I have 0 access to the home at all, and no SIM card. I downloaded the firmware, and I started up Odin to flash the stock firmware on. I was met with an error that I can only find scarce info on, and on YouTube it seems to be from Indian tech channels who are telling me to buy z3x-tools, and I'm not here to go ahead and try to do that.
To be more specific, my particular error is: SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1. I could not find info on this error from xda, and I'm confused really. What's going on here?
As per promise to my friend, if I fail to find anything on this issue by tomorrow, the phone meets it's doom by the curb. After all, I'd really like to not use this janky phone anymore, as I'm quite tired of being unable to do nothing (to be more specific, it's using an older version of Cyanogen because I can't afford to use Sunshine to upgrade my bootloader and S-OFF, and everything on the phone is slowly stopping to work, in particular my camera app crashes instantly, flashlight does not work, a good chunk of the left side of my touch screen has stopped responding and I've had to use one-handed mode to text, along with flipping the screen, and it is a gigantic mess of issues.)
Please help out, xda. I've got nothing else I can really do for this phone, and here I was figuring this would just be an easy night of fixing the damn thing.
After some fiddling, I have now gotten an error on startup that isn't even the FRP lock anymore; it's a notice telling me to use the Smart Switch app's emergency backup. Attempted to install it, and after jumping through multiple hoops and several fixes, I am stumped at "Error 1152: Temporary files failed to copy" upon attempting to open it's installer.
Pushing on, I have received a new error. I instead am just attempting to install the AP file, and I now receive another error: KERNEL REV. CHECK FAIL. DEVICE:1, BINARY:0. Even more fun, because there's even less information on this one. In fact, I have only found others crying for help as I am. Regardless, I am now trying the other 3 files. BL outright fails to download, CP has replaced the screen I saw originally, instead putting the kernel error up top instead of the old FRP lock error I'd get. CSC seems to have put the FRP lock error back though. Afterward, I had a feeling that maybe BL will work now? I simply got my usual old SW REV error I mentioned already.
From here, I learned of an issue here. I think I need a different AP file. My phone is the MetroPCS version. The only reason I say this is because I realized the AP file caused the Smart Switch error, then CP -> CSC brought me back to the failure. The KERNEL REV issue occurs when trying to use my AP, with these logs:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This leads me to think perhaps I have a corrupted file. However, I have found 1 single link for the firmware. Perhaps someone can help me?
Can you get into recovery and see which firmware you are on? Does your phone boot into the os? I've been through a lot of these issues. I just recently didn't have a sim, so no real term, and had the Google lock, but there is a way out of it.
This leads me to think perhaps I have a corrupted file. However, I have found 1 single link for the firmware. Perhaps someone can help me?[/QUOTE]
Drunkpilot said:
Can you get into recovery and see which firmware you are on? Does your phone boot into the os? I've been through a lot of these issues. I just recently didn't have a sim, so no real term, and had the Google lock, but there is a way out of it.
This leads me to think perhaps I have a corrupted file. However, I have found 1 single link for the firmware. Perhaps someone can help me?
Click to expand...
Click to collapse
[/QUOTE]
Cannot get into the OS, recovery, anything. All I can do is enter download mode. The FRP lock prevents anything else.
Cannot get into the OS, recovery, anything. All I can do is enter download mode. The FRP lock prevents anything else.[/QUOTE]
I ran into the same issue on another on5 when I had unlocked it for a friend, rooted it, then stupidly took off oem unlock and and rebooted to give back to him. I had to Odin the exact firmware I was running in order for it to work and fix the phone. I was running a t mobile older version ( an APF1) while trying to flash an (APL1) which wouldn't allow me to flash the AP partition in Odin. Once I flashed the full APF1 firmware with a factory reset, it booted normally, but unrooted, of course. Finding the correct firmware should hopefully fix your problem if your circumstances were like mine.
Check out these links. There are also other links and other threads to check out as well. Also check out sammobile.com as they have the the stock firmware for this phone.
whodisname said:
Have you tried this?
https://9to5google.com/2015/11/03/how-to-to-bypass-factory-reset-protection-samsung-phone-hack/
Sent from my SM-G550T1 using XDA-Developers mobile app
---------- Post added at 09:11 PM ---------- Previous post was at 09:09 PM ----------
http://visihow.com/ADB_commands_to_bypass_Google_Account_Verification
Click to expand...
Click to collapse
You can also pm me for link to my drive account as I have both of the baseband versions of this firmware. Hope this helps
----edit-----
Here's another thread to check out as well. Make sure to use the latest version of odin as well. Oh and one more thing it you're gonna use any custom Rom on this device I suggest only using the one by @SuperStars as all the others are for the Indian variant and will cause sound yo not work at all on any other Varian even though they claim to work for the metro/tmobile variants. Superstars can be found here:
https://forum.xda-developers.com/sa...to/stock-rom-on5-flashable-metro-pcs-t3476919
hatchet13rydin69 said:
Check out these links. There are also other links and other threads to check out as well. Also check out sammobile.com as they have the the stock firmware for this phone.
You can also pm me for link to my drive account as I have both of the baseband versions of this firmware. Hope this helps
----edit-----
Here's another thread to check out as well. Make sure to use the latest version of odin as well. Oh and one more thing it you're gonna use any custom Rom on this device I suggest only using the one by @SuperStars as all the others are for the Indian variant and will cause sound yo not work at all on any other Varian even though they claim to work for the metro/tmobile variants. Superstars can be found here:
https://forum.xda-developers.com/sa...to/stock-rom-on5-flashable-metro-pcs-t3476919
Click to expand...
Click to collapse
Unfortunately, all of these are not the solutions to my issues. I require the AP, CP, CSC, etc. versions of the firmware that can be sent through Odin. I have no access to my recovery or OS due to the lock already being on.
All the links I sent you were to the odin flashable .tar files which is all the files needed to get your phone up and going again. Most of the links will show the download as a zip file which you would extract after downloading then use odin to flash the extracted files to your phone
hatchet13rydin69 said:
All the links I sent you were to the odin flashable .tar files which is all the files needed to get your phone up and going again. Most of the links will show the download as a zip file which you would extract after downloading then use odin to flash the extracted files to your phone
Click to expand...
Click to collapse
Are you sure? I downloaded from every link and it seemed to be a standard recovery .zip file from each one; that or the link was expired, deleted, etc.
Hi, my device is Moto g4 plus. I have removed frp and flashed stock rom and flashed hw network. Got my network back but if i open camera, it says"camera is busy" even if I install third-party camera application also not working. Even flashlight also not working and missing option from quick pull option. Even if i install flashlight application also it says no flashlight detected. Plz help me with some solution for this issue...
Aashakmeeran said:
Hi, my device is Moto g4 plus. I have removed frp and flashed stock rom and flashed hw network. Got my network back but if i open camera, it says"camera is busy" even if I install third-party camera application also not working. Even flashlight also not working and missing option from quick pull option. Even if i install flashlight application also it says no flashlight detected. Plz help me with some solution for this issue...
Click to expand...
Click to collapse
wrong forum
Sorry to bump this, but I need a response to this now. I have no files to flash and my old phone just bricked, so...
Can anyone help me out? I need an Odin flash in order to do anything, in which nobody has provided me any reliable file. The last guy in the thread earlier from a couple months ago gave me broken links instead of anything, and then didn't respond after I made him aware of this. Someone please.
Drunkpilot said:
Can you get into recovery and see which firmware you are on? Does your phone boot into the os? I've been through a lot of these issues. I just recently didn't have a sim, so no real term, and had the Google lock, but there is a way out of it.
This leads me to think perhaps I have a corrupted file. However, I have found 1 single link for the firmware. Perhaps someone can help me?
Click to expand...
Click to collapse
[/QUOTE]
How did you get past the FRP lock?
F0rZ3r0 said:
Sorry to bump this, but I need a response to this now. I have no files to flash and my old phone just bricked, so...
Can anyone help me out? I need an Odin flash in order to do anything, in which nobody has provided me any reliable file. The last guy in the thread earlier from a couple months ago gave me broken links instead of anything, and then didn't respond after I made him aware of this. Someone please.
Click to expand...
Click to collapse
Hi there. Did you ever get an Odin link that worked? Is that the best/only way to unlock a Galaxy on5 Metro PCS?
davizzyus said:
Hi there. Did you ever get an Odin link that worked? Is that the best/only way to unlock a Galaxy on5 Metro PCS?
Click to expand...
Click to collapse
I have no clue. I never got a Odin link that worked. I need it to make my phone work, which is why I'm asking, since nobody seems to have what I'm asking for.
https://drive.google.com/file/d/0B7K3zIeKabE8aHo5NlVMLXpNdUU/view
Use the PL1 firmware. The most spread around one is the PF1, these should work. If not, I'm not sure what to say. Browse a bit more until you can find a solution. This fixed my phone finally.
F0rZ3r0 said:
https://drive.google.com/file/d/0B7K3zIeKabE8aHo5NlVMLXpNdUU/view
Use the PL1 firmware. The most spread around one is the PF1, these should work. If not, I'm not sure what to say. Browse a bit more until you can find a solution. This fixed my phone finally.
Click to expand...
Click to collapse
What kind of phone? How did you load the firmware? Did it bypass the Google lock?
davizzyus said:
What kind of phone? How did you load the firmware? Did it bypass the Google lock?
Click to expand...
Click to collapse
1. Umm... MetroPCS On5. :b
2. ODIN.
3. I didn't have a Google lock, I had a FRP lock triggered by custom binaries.
F0rZ3r0 said:
1. Umm... MetroPCS On5. :b
2. ODIN.
3. I didn't have a Google lock, I had a FRP lock triggered by custom binaries.
Click to expand...
Click to collapse
okay so i had this very same problem a few months back then got a new phone(on moto g5 plus now). the only way i could find to defeat FRP was flashing the "home csc" in odin. i HAD it but idk what happened must have deleted it when i got rid of the phone but im looking for it again also because i am fixing a friends On5. when i find it ill upload it!

bricked sm-t580

i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
could not do normal boot invalid kernel length
Click to expand...
Click to collapse
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....
Have you tried flashing TWRP using ODIN? (AP Slot)
i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options
ilovebytes said:
i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options
Click to expand...
Click to collapse
Wouldn't it simply fail if OEM unlocking was disabled? I don't know honestly. I'd try it if no other solutions come up.
ilovebytes said:
i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....
Click to expand...
Click to collapse
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.
of course i tried to get into receovery mode but the problem is i can't - when i do home, vol up and power absolutely nothing happens, i only get into download mode
edit: i believe FRP is the Problem this prevents odin from writing the files to the tablet - as it allways times out with :
Complete(Write) operation failed.
Click to expand...
Click to collapse
what i do not really understand is why FRP does not let odin flash an original samsung firmware ?
[QUOTE what i do not really understand is why FRP does not let odin flash an original samsung firmware ?[/QUOTE]
This sounds more like a binary issue. I have reason to believe you are what's called an FRP Binary Lock. Recovery is usually inaccessable or re-routed and you cannot "seem" to use Odin3 but in fact you can. This issue you apparently are having sounds oddly like some issues I've had on these devices and is often a result of bad Rooting or invalid firmware being installed. This overloads the binaries and puts the device in a locked mode with symptoms of an inaccessible Recovery a difficult to use Odin3 or a bootloop. Most of the time I hear of a notification somewhere of an FRP lock. If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Casper Young said:
If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....
ilovebytes said:
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....
Click to expand...
Click to collapse
The situation I was suspecting is a "Custom Binaries are Blocked by FRP Lock" to which you would have seen a notification of it in one of 4 ways. Your situation is somewhat similar because you cannot access Recovey and although Download Mode is accessable it appears useless. Your device is not Bricked. A bricked device is unusable in any way and these days most devices can be restored.
You do seem to be having some difficulties that are usually common with binary issues. You can in fact use Odin3 but how is the question. Usually one can flash in the Stock firmware and that returns the device to normal. When it becomes impossible to flash in stock firmware or anything else it seems, to my experiance has always been a Binary issue. I will provide a link to the 4File Official firmware. And instructions for you to properly use it for your needs.
SM-T580 Official Stock Firmware 4Files
https://drive.google.com/open?id=1zvhwUfSRW44V1ZwEsHLRvlh-T0M79ks9
I'll assume you know something about using Odin3. Unzip the file to your desktop. There are 4 files but you'll only use 3 of them. You can use the patched version of Odin3.13B or you can use Odin3.14. Place the files in their respective places. BL, and AP are easy enough to see where they go. Now there is a file labeled CSC and one labeled HOME CSC. You will only use one of them. The CSC file returns your app data to factory settings (it erases everything). The Home CSC file keeps the app data. So it's your choice which one you choose. These are Official Firmware Files so you should be able to flash them in. Should that not work for you my most likely answer would be that your binaries are the issue and that is why you can't as of yet use Odin sucessfully. Does Odin even try to initiate a flash then stalls or does it do nothing altogether?
There are two different Binary files for the SM-T580 that I have. I would suggest using the Binary 4 FRP first. f I recall correctly the Odin3.13B patched version was made for this. Place the file in the AP section and try flashing it. You should get a few gears on the screen turning if it applied, or maybe not. If that fails use the U4 Binary Unlock file. It is only after you flash in the binary files that you can then install the Stock Firmware. It is the overloaded binaries that prevent the use of Odin as you may be experiancing. I am also including the Knox cleaner in case you need to reset it.
SM-T580 Binary files:
Binary 4 FRP Unlock
https://drive.google.com/open?id=1iXrZR2E7m6Ai5InAw8u3lzeLhb3ThRo5
U4 Binaries. This is two files. Flash one at a time using the AP section. They are labeled 1rst or 2nd
1. https://drive.google.com/open?id=1rX_luP_0W4ygdloIr2Gr9TCSfqFyaTK-
2. https://drive.google.com/open?id=1xsw4GVYtNMJhiMXV2cR2jaJvToG_n6Pi
Knox Cleaner: Also flashed in using the AP section of Odin3
https://drive.google.com/open?id=1EolYe9auY9jslYSpSgHoon_YB00D2noV
Good Luck and let me know if this helps or not.
lewmur said:
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.
Click to expand...
Click to collapse
Only if they could get into Recovery they may be able to reset it.
I have never once needed to go to Recovery to do "anything" before using Odin3 to flash.
The only time I've had to go there (repetedly) and reset was when trying to get past FRP Google Account Protection. Sometimes it takes out the page I want to get to and I need to reset it to get to it again. This is "not" always neccesary before flashing a ROM which rewrites the device programing.
sorry for double post
@Casper Young
thanks for your help so far, i am gonna try your suggestions on weekend when i have a bit more spare time - hope i can get the tab running again

Categories

Resources