Related
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
I am trying to connect to my university's wireless.
We have two different wireless ssid's that i can connect to with my laptop.
The first, called UBC is unsecured, but when you connect, it takes you to a web page where you enter your username/password.
The second, called ubcsecure, can authenticate with either WPA2 or WPA ( it shows up as WPA2-Enterprise).
The encryption method is AES for WPA2, and TKIP for WPA.
EAP type: PEAP v0 , Authentication protocol is MS-CHAP-V2
there is an option for mutual authentication using a certification server:
secure.wireless.ubc.ca
I am unable to connect to either using the stock HTC magic ROM, the HoFo community rom, and most recently, myHero 1.0.1
I have tried editing /system/etc/wifi/wpa_supplicant.conf to include
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
Any ideas as to how to connect?
Data wipe.
Try to reset your phone's basic settings.
It could rebuild the information necessary to acquire the specific IP from their connection.
Manually entering the data couldn't hurt either. This is something that usually I would consider consulting the school about. Privatized internet connections could cause a number of issues for those seeking to utilize Wi-Fi.
The NAT settings might be too strict to support a handheld device.
Me too!
have you found any other solution??
i m here in ubc as well with my htc magic 1.5
when i'm trying to connect to ubc,, it keeps requiring the ip but doesnt connet
and ubcsecure doesnt even show up!
is really frustrating not being able to use internet in universityyy..
i thought by activating the wpa enterprise will work for the ubcsercure, i guess not??
will any of the heros rom work??
Im having this problem too.. anyone find a fix?
I have no idea why but ubcsecure seems to be working using JesterBlur ROM. http://forum.xda-developers.com/showthread.php?t=567122
it works on the Dream? or sapphire? I don't think it matters but... be interesting to know
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Ask for working setting
absolutcamper said:
Dream. Theres a version for the Sapphire. Maybe give it a shot? ubcsecure still working here.
Click to expand...
Click to collapse
Did you use the UI setting or you edit the "wpa_supplicant.conf" file manually?
would you please send us your "wpa_supplicant.conf" file or its ubcsecure part? it would be the great help to have a working setting.
Cheers,
Ali
I used the UI that came up during first boot. How can I get to that file?
the wpa_supplicant is in /data/misc/wifi. But considering how it works using the ui settings, i dont think changing the config file will work...but please still post it.
I also tried replacing the wlan.ko from the jesterblur rom... and doesnt seem to be compatible with magic which is apparently normal because there is a patch for magic users that fixes wifi apparently. I will try the wlan.ko from the fix soon probably to see if it works.
Hi guys,
I'm at UBC with the same problem (I can't even connect to the regular UBC network). I went to the UBC help desk and they basically told me that they don't support android at all. The funny thing is I can connect to the fatport network with no problems but cannot connect to ubc, ubcsecure or eduroam networks on campus. I'm currently runnning on Cyanongen 4.2.4 (waiting for 32a kernel to upgrade to 4.2.5) on a rogers htc magic.
Anyway, the point of this post. If anyones interested in meeting up at UBC to find a solution to this problem it'd be great. I'm hoping we can eventually create a package of some sort that'll fix any android phone but lets focus on fixing the current prob first.
Also @fnkaze - aren't the dream and sapphire the same thing?
Er, i think the dream is the G1 and the sapphire is the G2 aka the rogers magic... well i think the dream has a differnt wifi driver? maybe.. thats the problem
I think the reason why they dont support android is because the stock rogers rom doesnt have native wpa2 support i think.... but the custom roms should have it.. the hero rom does have it... at home my wpa2 wifi works fine
I can also connect to fatport, i think the eduroam is also using the same thing...tho ive heard eduroam seems to work on the rogers rom at different univeristies..
I still have yet to try the jester rom wifi driver tho, ill try it soon...
Thanks for the clarification. And the reason eduroam works at other universities is because the WPA encryption settings are based on the uni's actual/main wireless network. So at different universites the authentication protocols might be a bit different.
What phone do you have? The dream or the magic? The jester rom doesn't work on my magic.
i have the magic, but i think it should work on the magic, they also have a seperate patch to get Wifi working for the it.. so im assuming its possible..
So yeah, Concordia University in Montreal has the same WPA2-Enterprise and this is how I got WIFI to work on my Magic (with HoFo's Sense UI ROM, would still probably work with a rooted 1.5/1.6 ROM)
In fact it will probably work with any rooted Dream or Magic
Remember you need your phone to be rooted for this to work, you will also need to have the drivers installed for your phone from the Android SDK.
- Go into recovery mode
- mount the /data/ folder
Code:
adb shell mount /data
- With ADB Pull the /data/misc/wifi/wpa_supplicant.conf file to your computer (in this example it will go to the tools folder where you have your androidsdk)
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf .
- Make a backup of your conf file in case you mess something up
- Edit it and add in the configuration settings given by your University for Linux wpa_supplicant.conf files, so in your case
Code:
network={
ssid="ubcsecure"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}
- With ADB Push the wpa_supplicant.conf from your computer to the /data/misc/wifi/ folder
Code:
adb push wpa_supplicant.conf /data/misc/wifi/
mydewji13 said:
UBC help desk and they basically told me that they don't support android at all.
Also @fnkaze - aren't the dream and sapphire the same thing?
Click to expand...
Click to collapse
Honestly that person at the helpdesk probably doesn't even know what Android is. If they says they don't support Android at all, well using their logic any Linux distro using wpa_supplicant.conf isn't supported which OBVIOUSLY isn't the case.
And no the Dream and Magic are far from being the same device.
Thanks!
I'll try this solution and see if it works. Will post back to let you know how it goes.
Hi,
Ok, I just finished installing the sdk, fixing udev to recognize my phone etc...
The problem I'm having is that everytime I run:
Code:
adb shell mount /data
I get the following error:
Code:
mount: cannot read /etc/fstab: No such file or directory
Help?!?!
NVM after reading the adb -help i tried this:
Code:
adb pull /data/misc/wifi/wpa_supplicant.conf /home/myuser
Ok something really wierd happened...I pushed a new wpa supplicant file and the rebooted the phone and it stopped seeing wireless networks! But ubcsecure showed up as a known network. If I long press it an 'forget it' I can see networks again, but still cant connect to any ubc network?
WTF>?
Is there anyway I could use by ubuntu wpa_supplicant settings? Anyone know where the file is on Karmic? b/c I cant find it at all
Is anyone able to to connect to any VPN server with the latest firmware update ?
It simply wont connect while it was connecting on the original firmware.
I have the same problem.
A vpn that was working fine before the update now wont work. It looks like the session is up for about a minute, and then closed by a TermReq from the N1 end but the N1 never completes the setup to start with.
SC
Ok,
I think I have a solution to this.
Code:
adb remount
adb shell chmod 755 /etc/ppp/ip-up-vpn
then try and reconnect
SC
My original VPN configurations did not work after the upgrade. I created new VPN entries and deleted the old ones. The new entries appears to be working fine so far.
ScaredyCat said:
Ok,
I think I have a solution to this.
Code:
adb remount
adb shell chmod 755 /etc/ppp/ip-up-vpn
then try and reconnect
SC
Click to expand...
Click to collapse
Thanks but still having the same issue. it will connect, stay connect for a minute or so and then the network connectivity will be gone (the VPN icon will show that VPN is still connected but in reality the connection died).
This has also been the case in the original phone firmware (prior to the upgrade).
Someone on Modaco did similar but with the follwing line:-
adb shell chmod 777 /etc/ppp/ip-up-vpn
I've lost the ability to connect via adb to mine from my mac for some reason, working on that !
EDIT : Just noticed you had this problem pre-upgrade. This fix is not going to resolve that. Back to VPN settings / compatability.
This indeed solved the problem of not being able to connect. thank you.
It did not however solved the issue where the VPN connection stops forwarding traffic after 1-2 minutes (without actually disconnecting).
It seems to randomly happen, more when connecting to the VPN server over wifi.
I checked the logs and could not find anything.
Anyone has any idea why is this happening? this VPN servers works well on my laptop and iPhone.
I just purchased a MyTouch 3g (32b) off of eBay. I have been using tmobile sidekick prepaid on an iPhone 2g. I used the APN: internet2.voicestream.com. This also worked on my htc dash. I've read on the boards this doesn't work because tmobile blocks total internet plan (internet2) on the MyTouch. If so, is there another apn i can use? (I do not want people telling me why to switch to android data or anything, just alternatives for now).
Also, if there is no way to get internet to work so I can login, if I find a way past the initial login, would my internet never work?
Problems with bypassing initial login:
adb shell "error: device not found" (haven't resolved)
rooting- Method 1. Can not get sd card cid to create a goldcard
Method 2. Can't bypass initial login to install flashrec
Any other possible ways to bypass initial login?
Thank you for any help in advance.
One way is being in range of Wifi when doing the setup.
I am in range to wifi, that is why I was trying to use adb shell to enable it, but it wasn't working. Is there another way to enable wifi?
When I run adb shell I get this:
* Daemon not running. Starting it now. *
* Daemon started successfully *
Error: device not found
The mytouch is on and and plugged into the computer. I've tried it on Windows 7, mac, and xp.
Problems are all almost fixed. I had a friend put in his sim card and we rooted, and flashed Super-E on the MyTouch. Everything works find except the internet.
If its not rooted and u dont have a data plan it will not let you pass the setup to enable wifi. you would have to use a friends sim with data and setup then use wifi. with being able to use interent on the sidekick plan is another story which i am corently trying my best to figure out.
Thats exactly what I did, so if you have any progress on getting the sidekick data to work, please post on the thread or PM me.
Hi
Simple question. Before HD2 I had Samsung Spica mad and I'm using there apps like:
EasySMS over WiFi - 100% working on Spica http://www.appbrain.com/app/easysms-desktop-sms-free/org.fireblade.easysms
WebSharing over WiFi - 100% working on Spica http://www.appbrain.com/app/websharinglite-file-media-sync/nextapp.websharing
and Samba Filesharing over WiFi - 100% working on Spica. http://www.appbrain.com/app/samba-filesharing/com.funkyfresh.samba
Gremote doesn't work too. It is strange becouse this app is different that listed above.
Since I have HD2 it doesn't work (and all alternative apps too). Samba see phone in workgroup but can't connect to it. EasySMS & WebSharing get connection timeout when i want to connect.
BTW: When i enter IP adress in HD2 browser i can log in to EasySMS or WebSharing. So what is the problem?
Maybe somebody can fix it? I try many roms (SD and NAND) = problem is on everyone :/
Sorry for bad english :<
we sharing lite works fine for me, enter your ip adress for the hd2 into your computer browser then enter the password
i have also iused other sharing programs without any problems
What ROM that you use?
I know how to use this program, and they don't work. It isn't the router issue cuz i can use that programs on my father LG Swift.
Here: WebSharing - connection timeout - http://screenshooter.net/2156127/ebuwvsv
I have HD2 with MDJ's CyanogenMod 7 v. 2.6 - Gingerbread 2.3.2 ROM, and I have similars problems. All programs like MyPhoneExplorer (can't find phone) Samba Filesharing (identical problem like Lanc1337) doesn't work.
I can't ping phone from computer connected to router. I check all on another router, problem is the same.
Before I have ZTE Blade and all work perfect!
I found ROM where sharing is working!
http://forum.xda-developers.com/showthread.php?t=912427 - all type of sharing is working here!
But i don't like sense -.- So, why this isn't working on all roms? Kernel or rom issues? I would like this to work on CM build...
Try this:
launch terminal and type:
su [ENTER]
iptables -P INPUT ACCEPT [ENTER]
iptables -F [ENTER]
of course [ENTER] mean press ENTER key
Doesn't work. After i enter second and third command i have error:
getsockopt for multiport failed strangely: No such file or directory
Errors is ok - don't worry. In my Ginger this is working for Samba (I'm using MDJ Cyan V2.7 NAND)...
Maybe try this at first (in terminal):
iptables -P INPUT ACCEPT [ENTER]
and after all this try ping your HD2 from computer (try ping -t ip_address to continous ping - it's good idea to ping -t your_hd2_ip from computer to see if and commands helped) and ping your computer from HD2.
Before I put all this my phone isn't visible in LAN (even with ping command). After putting this everything is ok (and ping is working ).
Put here yours output (after all commands) of "iptables --list [ENTER]" please. Maybe I'll figure someting out...
I check all, and:
I must enter commands:
1. su
2. iptables -P INPUT ACCEPT [ENTER]
and start pinging from phone to computer.
After this software like MyPhoneExplorer can connect to phone. If I enter only commands, and don't use ping command, computer can't connect to my phone.
It's very strange....
After enter iptables --list
chain INUPUT (policy ACCEPT)
chain FORWARD (policy ACCEPT)
chain UTPUT (policy ACCEPT)
I check all again from start to end.
I must enter to terminal su,
and start ping, after this i can exit ping, and I can connect to phone, and phone reply to pings. I don't must enter "iptables -P INPUT ACCEPT"
Any ideas for permamently solution ?
UP
Permament solution will be great!
Sorry for spam :/ Is nobody know how to solve this issue?
Bump!
Hi, also have this issue. Doing the iptables command doesnt do anything for me, it just gives me a bunch of errors. In my case it is enough to just ping my computer from HD2 using terminal emulator or other app (I use Net ping) and I can connect to phone via wifi immediately. After phone restarts I have to do that again.
i have just same issue,seems all CM based rom has this problem,anyone has any ideas?
anotherfullbowl said:
i have just same issue,seems all CM based rom has this problem,anyone has any ideas?
Click to expand...
Click to collapse
Not really.... Besides this one I am currently bumping another thread like this in hope that someone will show up with something, at least with a few pointers of how and where to look for the reason of this issue....
clyder said:
Not really.... Besides this one I am currently bumping another thread like this in hope that someone will show up with something, at least with a few pointers of how and where to look for the reason of this issue....
Click to expand...
Click to collapse
Is this problem Only comes with CM roms?Is there Anyone who use CM rom with sharing apps working?
I really like CM roms, it has some good features,but sharing apps also important for me.
how can i unlock my htc hd 2
anotherfullbowl said:
Is this problem Only comes with CM roms?Is there Anyone who use CM rom with sharing apps working?
I really like CM roms, it has some good features,but sharing apps also important for me.
Click to expand...
Click to collapse
Not only CM ROMs. I am using UltimateDroid based ROM and also have this issue. My guess was that it could be related to Gingerbread, but I could be wrong.
Has anyone solved this?
I just found out that by using tytung r6 kernel this issue is gone. When I turn the wifi on, connect to the router I can ping the phone immediately. Also Wifi tethering in settings menu works. I am currently having some issues with restoring apps but wifi works great. I have downloaded r6 CWM install from here.