Related
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
I LOVE YOU! I honestly didn't think this would work but it does and i'm so happy.
just about to make a thread asking how to do this. Glad I searched. way to make you jump through hoops tho.
thanks for this. for me the phone didnt even have to be completely powered off.
i wa sin a sleep of death so i held down power and vol down until lg logo appeared let go and then pressed power again. pressed power 3 more times and it booted into recovery
nm
This thread should be stickied in Q&A
jadengore said:
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
Click to expand...
Click to collapse
You're a lifesaver.
commissionerg said:
You're a lifesaver.
Click to expand...
Click to collapse
Thank you, doing my best to help out.
Sent from my LG-D800
Awesome. Didn't know this!
Thanks
@jadengore : I was stick in a bootloop, and your thread helps me a lot !
Big thanks !
:good:
Also, if you're too scared to try that, I've had success using rom toolbox to reboot into recovery. Of course this is assuming you have a working system.
Thanks very much, but...
Hello,
I unfortunately dropped my VS980, cracked the screen, and the digitizer only works on the bottom portion of the screen. I have a new screen coming, which should fix this issue, however I would like to get my data off my phone (pics), but I can't as I have a password (draw a line/shape kind) and without being able to enter this in, it will not connect to my PC as mass storage.
I was hoping to be able to boot into recovery with hardware buttons and get my data that way, not sure if that is possible either, but at least try it. This I found to work to get me to the factory hard reset screen, but I am skeptical to push the power button and have it wipe my data!
I am open to other options to get to my data if anyone has any, including android device manager which is something I have thought of, but not sure if I can reset the security to nothing, or maybe as the bottom portion of my digitizer seems to work, I can enter in a space or a period for a password and enter that in.
Looking for any guidance!
Thanks!
Got it!
Redid the password with android device manager, which got me in, but I didn't even need to do that as I had the brainwave to plug a mouse in with a usb adapter. Works flawlessly, got my data, now just waiting for replacement screen!
Strange Problem
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
hardware keys to enter recovery. voldown+power then volup+power
RevoDSG said:
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
Click to expand...
Click to collapse
steps to enter recovery that worked for my Sprint LG G2 on ZVC firmware.
1) hold power and volume down button till you see LG logo -- quickly release these buttons and
2) immediately hold power and volume up buttons to enter into factory reset menu.
Then 3 presses of power key to confirm wipe and enter TWRP recovery. :good:
I was going mad trying to enter recovery for an hour. It appears like different models/software versions have different key combinations for entering recovery mode.
My phone was stuck at lg logo screen and i didnt have nandroid backup of the phone. so couldn't try the TOT restore method too as i waned my phone data.
Another way to get to Custom Recovery
krezee said:
steps to enter recovery that worked for my Sprint LG G2 on ZVC firmware.
1) hold power and volume down button till you see LG logo -- quickly release these buttons and
2) immediately hold power and volume up buttons to enter into factory reset menu.
Then 3 presses of power key to confirm wipe and enter TWRP recovery. :good:
I was going mad trying to enter recovery for an hour. It appears like different models/software versions have different key combinations for entering recovery mode.
My phone was stuck at lg logo screen and i didnt have nandroid backup of the phone. so couldn't try the TOT restore method too as i waned my phone data.
Click to expand...
Click to collapse
The way that let me get into custom recovery is different.
I hold 'vol up+power+vol down' to start from turned off state and keep holding it[Don't leave just keep holding the 3 buttons]. It doesn't show factory reset screen, it get me into TWRP[Custom Rom] directly. I heard 3 buttons gets u in safe mode IDK but I got into proper working TWRP.
RevoDSG said:
I am using F-320K[G2], Cloudy G3 Rom, when I hit boot into recovery it does bring me to TWRP but hardware buttons doesn't work. It just restarts the phone.
Vol down+Power till LG logo up, release and press and hold again and after few secs it restartsand came back to LG screen. If I continue to held it it just repeat restating.
Click to expand...
Click to collapse
I have a F320S.
Hold Volume up and press the Power Button,when comes Lg Logo release the Power Button and start the TWRP
if anybody's looking for the information in this thread like i was, and the posted method doesn't work (it did not for me):
1. Power off
2. Hold volume down and power
3a. release both at logo AND press BOTH at logo right after releasing
4a. Enter recovery
You should enter recovery, but if not...
3b. Keep the buttons pressed (your phone might continue into the start animation, but if you keep the buttons press it will return)
4b. The first logo will appear. Release both and press BOTH
5. Enter recovery
hope this helps someone
http://forum.xda-developers.com/showpost.php?p=45901939&postcount=3
jadengore said:
Sorry if this post is redundant, but the methods I've seen haven't worked, so I can't be alone. Here is how to boot into TWRP if your phone is boot looping/soft bricked. (info pulled from here, of all places.)
1. Make sure phone is completely powered down.
2. Press and hold the Volume down button and the Power button.
3. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
4. Release both buttons when the Factory Hard Reset screen displays.
5. Press the power button three times, like it says. Even though it says it will delete everything, it won't (I can confirm that if you are at least on v2.6.3.2).
6. After a "factory reset processing" appears, you should get the TWRP flash screen, and you are good to go.
Hope this helps someone besides currently frustrated me.
Click to expand...
Click to collapse
this worked omg...thanks a million...
Just wanted to contribute here in case anyone else had tried everything listed in this thread and still was unable to boot into TWRP.
I'm on Sprint, stock, rooted ZVE, and I have TWRP 2.7.
1. Power off phone, wait a few seconds to make sure phone is completely off.
2. Hold power and volume down.
3. As soon as LG logo appears, KEEP holding down power... BUT release volume down and SWITCH to holding volume up.
4. After a few seconds, screen appears saying "Recovery mode" and TWRP opens up after that.
I've encountered the following problem with my Galaxy Note 4: I just bought it online from a guy who turned out to be a fraud and I was not able to find or contact him again via the internet market place. So that was really stupid of me...and expensive...and I regret it very much and with hind site I should have picked up the signs but...o well you got the picture...I got ripped.
Anyways after careful inspection it turned out to be a real genuine Note 4 N910F with 64 Gb but with a korean or chinese or something recovery mode (I saw it once when I got home), an imei not to be found on any stolen phone list and working correctly with an european rom that includes English and Dutch at that point.
That's when I decided to factory reset it and then I got into trouble again: For some reason it got stuck in a boot loop with just a No Command message. Normally you can reach the recovery mode by pressing Volume Up +Home +Power but now nothing happens. It's not a real brick but with just the No Command message and no access to the recovery mode I don't know how to fix this.
Can anyone help me with a clue on how to get out of a No Command loop without recovery mode? Or how to get into recovery mode if start with Key Up etc does not work? Or any other clue that could help me?
Thanks in advance!
Kind regards,
Rene (aka the guy who got ripped off but hopes to save the phone)
Can you get into download mode?
Thanks dr.mOx for responding!
I tried both volume up+home+power to get into recovery mode and also volume down+home+power to get into download mode but in both cases the device starts and shows me the android robot on it's back with a red warning triangle containing an exclamation mark and below the robot the message "No command." . The screen blinks every two or three seconds. The power button is not shutting the phone down in this state. I have to remove the battery to retry.
Battey out. Then in. Go to download mode. Flash stock rom with odin
Sent from my SM-N910F using XDA Premium 4 mobile app
Hi Ozzyblack. The thing is that, if I'm correct, when I press volume down+home+power to get into download mode I expect some sort of menu to appear asking to go into download mode or not. Am I correct? I saw same sceendump about that. And now I keep getting the No Command window. Do you think I miss something here? I do press volume down first, then home (keeping volume down pressed), and them the power button (keeping all buttons pressed). After a few seconds the display turns a bit more grey for a sec and then the android robot appears. But no message of sorts about getting into download mode.
Hi reborn67.
**Only if you have a galaxy note 4 N910F model**
If you can get into download mode your safe, and you can reflash an offical ROM, there is no menu system in Download mode so don't worry.
Don't stay in download mode forever or a long time, i.e. power off and wait till you have the ROM and Odin before you go into download mode as it sometimes times out even though it still shows in download mode.
Go to here http://samsung-updates.com/details/37086/Galaxy_Note_4_Snapdragon/SM-N910F/DBT/N910FXXU1ANK4.html download the ROM, and then download Odin here https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
These are the instructions from sammobile on how to flash ROm with Odin.Instructions
1-Extract (unzip) the firmware file
2-Download Odin v3.09
3-Extract Odin zip-file
4-Open Odin v3.09 (make sure the extracted rom file "N910FXXU1ANK4_N910FOXA1ANK4_N910FXXU1ANK4_HOME.tar.md5" is in the same folder as Odin before opening up Odin.
5-Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6-Connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM)
7-Add the firmware file to AP / PDA
IMPORTANT** Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I always do a hard reset after flashing new ROM's (settings, backup and reset, factory data reset)
I have a network locked UK N910F on EE and use this German ROM with no problems, this ROM has little bloatware.
Thanks gadjet. I do have odin and a stock rom ready for use now:
1-I tested odin and the usb port plus driver setup with my 'old' galaxy s4 and within a second the ID:Com in Odin turns blue. So that seems to be working fine.
2-So now I put in the Note 4 battery and connect to usb WITHOUT ANY KEYS PRESSED...just to test! And the usb connection bleeps from windows confirm a device is connected...so far so good.
3-Last and most important step fails: Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons), the 'no command' robot is still there, and also connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM) never happens. And also there are no windows usb connection bleeps so apparently there's a difference when I tried to select download mode.
Please know that I'm really thankful for all the great tips. But I guess I'm still missing something here.
Kind regards,
Rene
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
gadjet said:
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
Click to expand...
Click to collapse
Tried it. I do not get a menu. Just the No command robot.
reborn67 said:
Tried it. I do not get a menu. Just the No command robot.
Click to expand...
Click to collapse
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
gadjet said:
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
Click to expand...
Click to collapse
Unfortunately Kies 3 (latest update) does not recognize any connected device when I try this. The No command screen is laughing at us again
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
gadjet said:
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
Click to expand...
Click to collapse
There's no vibration...just the No command window.
OK, corrupt boat-loader Samsung service centre repair job, or local phone repair job.
Requires boot chip to be reflashed at board level.
Sorry we couldn't get you going bud..:crying:
Thanks for trying guys!
I'll see if I can find a local phone repair store.
I used to have the same problem with my SM-P605 when I flashed some ROM in the summer, the only special thing I did was not giving up and after all I got to the Download mode. Hope it'll work for you without Service.
Good Luck
Today I went to visit an official Samsung store. They told me I bought a very good but fake Note 4 and it is not likely it can be recovered. The weight is incorrect...a bit to heavy. Also the serial numbers are unknown in the samsung database and some other details were not correct. Thanks again for trying to help me! I now officially have a really expensive brick that looks like a note 4.:crying:
same issue i am facing..i tried all..but it shows no command error and no menu shows up
ill be going to get my phone checked today..if i get any way out ill let u know
What you did later to recover ? I'm facing the same problem I've visited samsung service centre but they are unable to solve it.
Can you guys help me for my phone Samsung note 4 because its just keep repeating in a logo SAMSUNG...
I tried pressing volume down+home button+power then got "WARNING CUSTOM OS... and stuff and then I press volume high+home button+power then I got the logo SAMSUNG that keeps on repeating. Please help me what to do
Hi,
The problem I have is really very common to most Samsung Galaxy users, but I haven't found any solution to my particular problem. Well, basically my Samsung Galaxy won't get out of bootloop. It just won't go beyond Samsung Galaxy SIV I9500 screen. The phone never did this before this. The phone did, however, rebooted occasionally by itself when running normally.
My phone is rooted, but it runs the official version of Lollipop for Galaxy S4. I had to factory reset my phone one day, and I decided it to reset from the Recovery Mode. After successfully resetting the phone, it booted as usual. Soon after it suddenly turned off, and went into this complete bootloop and would not stop until I remove the battery. Whenever I insert the battery back in, the phone starts by itself, without me pressing any button, and goes in the bootloop again. I can only enter the Download Mode that too for a couple of seconds. When entering the download mode I don't have to press the power button.
Is there any solution to this? I am assuming that my power button suddenly failed. The power button is definitely not stuck. I have opened the entire phone and cleaned the motherboard, and rechecked, it still showed the same problem.
Really appreciate any kind of help.
Hardware issue. Lightly tap the side of the S4 against a table and see if that temporarily frees up the button. Regardless of the end result, you'll need to replace the power button.
Hi,
No need power button to boot in recovery.
Just hold Home+Volume up should do the trick.
@Yoanf_26: How do you expect the phone to get into recovery without turning it on? Volume up and Power are all that's needed to get into recovery. It's the Home button that is optional.
Try a different battery (ask a friend or something if possible). I had similar issues on an i9100 lately. It could only boot to download/recovery mode and was even producing write errors. Looked like brickbug first but was bad battery indeed. It starts slowly with weird behavior and you think you've just messed the rom and just need to reset but it gets worse and worse until you're stuck with download mode only. If you have a spare battery in range its worth a try for sure.
Strephon Alkhalikoi said:
@Yoanf_26: How do you expect the phone to get into recovery without turning it on? Volume up and Power are all that's needed to get into recovery. It's the Home button that is optional.
Click to expand...
Click to collapse
Hello.
I already to start my S4 without power button must just with Volume up and home.
I test with Volume up with power, and my S4 start to recovery.
Differents methods are good to start to recovery. May not for all S4
Guess what? You have a faulty power button, because being able to start the device in any mode without the power button is simply not possible. I tried it just now. Also, if Samsung themselves require the power button to enter recovery or download mode it's illogical to not need it on what is (broadly) the same device.
My power button is good. I test with a custom recovery.
May be not possible with stock. I don't test with stock.
I'm not running stock anything on my I9505. TWRP 2.8.7.0 and CM 12.1 Optimized (currently) installed here. To access Download Mode requires Volume - and Power (Home optional). Accessing Recovery requires Volume + and Power (Home optional, again). Safe Mode requires pressing Volume - and Power, and holding down Volume - throughout the boot process.
As you can see, all functions require power. The fact yours doesn't is not normal.
Maybe, but my S4 is good.
If you think so, who am I to try and persuade you otherwise? When you do encounter an issue with that button, just think back to this thread rather than making a post about it. That way we can both avoid the inevitable "I told you so" that will come out of my mouth.
I tried flashing the bootloader from here.
Then it went crazy or something, and got stuck on the powered by android logo, however i was still able to boot into download mode the first time by holding power + volume down button
to simulate a battery pull then quickly holding the volume down + home + power again. Then I tried flashing TWRP immediately in an attempt to make it work because i have a flash drive to microUSB adapter that allows me to read flash drives from my phone ( so that I can flash the rom properly ). The last time I was in TWRP there was 0 things in my storage everything was wiped after I flashed TWRP the first time
Now im trying to go back into download mode but it just wont let me after the battery pull.
1.) After simulating the battery pull, I immediately let go when the screen is dark.
2.) I immediately attempt to go into download. It shows the powered by android for a second, then flickers then it's back to the powered by android again.
3.) I think my recovery and download is screwed. Or something is going on
=== EDIT ===
I managed to get into download mode and flash back my stock rom.
I think the phone must have read my Power & Volume Down & Home button as the battery pull because I let go of all buttons completely before doing it.
Steps to get out of bricked hell:
• Hold Power & Volume Down until the phone turns off
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
My phone is stuck on Samsung Galaxy J7 powered by Android screen. Holding down power and volume down buttons for few seconds make the screen disappear for a moment, the phone vibrates, then it returns to the same screen again. How can I fix that? (I guess its because I chose older .img file from twrp.me/Devices/ because the newest one did nothing when I was trying to install TWRP.) I dont have enough posts to post on the developer thread so I posted here
Please help
Approx. battery right now is 65%
Edit: I cant go into recovery mode I have tried alot of times already
Well basically be sure that you're doing the recovery mode procedure right. Try holding the volume up + power button + home button simultaneously. Then let go of the power button when you see the phone logo but remain holding down the volume up + home button. Wait for a while, the recovery mode page should pop up shortly.
Try vol. Up+power+home button. When samsung logo appears go off power button only, keeping the vol. Up and home button pressed. Check if you can enter recovery mod, if not download firmware for your drvice(download the correct latest firmware for your model) in to your pc. Flash it via odin.