im fairly new to all of this and i dont know what todo in midway of installing firmware somefockeng body bump in the cable and disrupted the installation and i need your help because it always shows
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on my Samsung s6 edge plus (SM-G928P) im pretty new to this stuff and i dont know what to do so can you please guide me THANK YOU VERY MUCH
Note: ive been trying to install every firmware but its still egtting that message and im still at emergency recovery function ( I can go to recovery mode just fine).
dases12378 said:
im fairly new to all of this and i dont know what todo in midway of installing firmware somefockeng body bump in the cable and disrupted the installation and i need your help because it always shows
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on my Samsung s6 edge plus (SM-G928P) im pretty new to this stuff and i dont know what to do so can you please guide me THANK YOU VERY MUCH
Note: ive been trying to install every firmware but its still egtting that message and im still at emergency recovery function ( I can go to recovery mode just fine).
Click to expand...
Click to collapse
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Please help me really i need to fix my phone i dont know if its a cable thing or not the __XmitData_Write error
Related
Hello people, I would like to introduce my self, I'm a 13 year old willing to root his phone and mess up, except I can't, my S5 Is a G900F but it came with the G900V software, then after I installed SuperSU it got bricked, then I installed the G900V software to unbrick it, now I cannot root it and I have tried many methods, like changing the software to BPB1, using SuperSU etc. p
Please suggest me ways to root my device, feedback is highly appreciated.
This is what happens when I try to install the latest build of TWRP:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, I'm ultimately trying to install the Resurrection Remix ROM
Please note originally it was ROOTED, it showed some weird thing on the applications it would show it had root privileges (Root checker basic, CPUZ, Root checker)
Please move this thread, I have just realized I posted this in the wrong thread, despite the message being in front of me and in the top of the posts. Sorry!
I just can't seem to find any root method for my galaxy a3 SM-A300FU running on marshmallow 6.0.1.
So if anyone can help it would be very appreciated.
Check out this thread
http://forum.xda-developers.com/showthread.php?p=69290521
Sent from my SM-N910C using Tapatalk
Still can't even install twrp, this is the log file from odin.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Removed!!
OK I did it. Here is how. I went to chainfires website then I found cf auto root file for my device. I downloaded that then,
flashed it through odin and it was rooted. Once it was rooted I downloaded flashify app to flash twrp recovery but it didn't work,
so I went back to my computer and flashed twrp recovery image through odin. And now it works perfectly.
Now I've searched just about all of Google on this, but I haven't been able to find a solution yet. Everyone here seems to know the most about this kind of stuff so I figured I'd make an account and explain my situation.
Backstory / How it happened
So, earlier today I figured I'd root my AT&T S7 Edge, I used a tutorial from Max Lee (I can't post links yet but if you need to find it I'm sure you can Google it) to get the job done, and after a while I managed to get the thing rooted. I knew absolutely nothing about what the hell flashing, roms, bricked phones, bootloops etc. were and now I only know a bit about them. So the phone was rooted just fine, I had SuperSU running, and a few other root apps, but then I figured I'd install xposed installer. So I went ahead and downloaded the wrong version (whoops) and it installed its framework and then said it needed to reboot my phone, low and behold we have a bootloop. It stays at the AT&T logo indefinitely if I'd let it. I'll happily admit to that being completely my mistake, I read the warning that it may cause a bootloop but I went ahead and installed it anyway thinking I could fix it if it happened. (This thread is my walk of shame I suppose)
Solutions I've tried
Now that the background has been explained, I'll go through the list of solutions I've tried, mind you I'm no expert at any of this so some of the info I give may seem redundant or nonsensical.
- Rebooting into recovery and clearing cache and factory resetting in every order you can imagine
* Only interesting thing I could find is that it still says custom on both the download mode (the one where you press vol down, power, and home) and when you reboot the phone and it goes through the initial animation, it shows custom with a little settings-looking icon just before it goes through the AT&T animation and takes a **** on my self esteem.
- Waiting ~1 hour for the AT&T logo to change to something other than an AT&T logo (I was desperate)
* Yeah nothing came out of that one...
- Flashing every stock firmware I could find on the internet, with every version of Odin I could find.
* Kept getting the same error, "FAIL! (Auth)". I looked it up and all I found was old threads from 2013 on the Galaxy S4, with some now-irrelevant information, I couldn't seem to get it to work, but I'm positive that's what I need to do unless you guys know another solution. Here's the full log:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what I did but after that at the download screen it says at the top left "SW REV CHECK FAIL : [aboot]Fused 4 > Binary 2
Sorry for the wall of text, I tried to format it as nicely as possible to make it somewhat readable. If anyone needs more info let me know.
Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...
alehawk said:
Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...
Click to expand...
Click to collapse
Thank you for the response
I've tried getting TWRP to work, but apparently there still isn't a way to get it working on the AT&T, I was under the impression that it was only for international and Korean versions. I haven't been able to find any version of TWRP that works for my device.
However I just did try some newer stock firmware from, "theandroidsoul" which partially worked, being that I'm desperate and don't know what I'm doing I just tried flashing all three:
G935AUCS4API2 - This one worked more than the others, but it seems at some point it disconnects for whatever reason, causing it to fail. After that my phone gave me the whole "You messed up go use smart switch" deal, and smart switch was saying my device was unsupported. That said I'm not sure what is causing the fake USB disconnect cause I can hear the windows sound for the USB disconnecting, but I'm not sure why.
Here's the log:
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> rpm.mbn
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> cmnlib64.mbn
<ID:0/005> sec.dat
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
And here's the log after another try (I factory reset and wiped cache again to give it another go)
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I found it interesting that it got even less far than before.
G935AUCS2APH1 - Stopped at lksecapp.mbn then went to FAIL! (Auth). There was no disconnect or reconnect
G935AATT2APG1 - Same as above
I seem to be stuck in a similar situation. Did you ever find a fix?
wunderkinder said:
I seem to be stuck in a similar situation. Did you ever find a fix?
Click to expand...
Click to collapse
I had the at&t s7 edge before and had the same problem but not sure if it was the same odin error.
But this is how you flash a stock rom on the at&t:
-You must use the princecomsy odin (search for it on google)
-Here is the stock rom with the latest security update (type "G935AUCS4BRA1" in the google search bar)
(I wasn't allowed to post links)
unzip and flash
tell me how it goes
My j5 (sm-j510fn) got pattern-locked n i tried to reset it but no success! Odin cant flash cuz the phone is on "mdm mode" or something and wipes wont working- what should i do?
try using nand erase all in odin
didnt worked bro...
EDIT: weird... cant upload an image of that...
anyway, the log says:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> ERASE_SECTOR: 0
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
use different firmware.
it isnt possible too body, due to odin refusing listen to me! it seems his hammer got heavier and now nothing is possible for me! cant flash rom/ firmware/ recovery- everything iv done give me a big red FAIL and a message of "MDM MODE, CANT DOWNLOAD" at the phone screen
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Hi,
you need to flash only the latest ROMs where bootloader version is 4, i.e., something as G950FXXU4CRI5 where the 5th letter from right is 4.
kyleblue09 said:
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Click to expand...
Click to collapse
Try downloading the latest firmware for your phone and region, if you still get sboot.bin failure its probably due to the USB cable you are using, I swapped my USB cable and now my S6 is happily flashing.
Tyr flashing without CSC.
You can flash CSC later I think.