Hello guys, sorry for maybe noobie question, byt
Does somebody notice that 2 speakers work only during multimedia?
When i get a call or any notification works only the downside one
It is possible to use both on rooted stock firmware?
Look here: https://forum.xda-developers.com/pixel-2-xl/help/arounds-enabling-speaker-ringtones-t3708516
Related
hey guys anyone know how to disable the mic on the device when using a bt handsfree, when not in a call? thanks in advance
anyone???
heloooooo
#1: Don't bump your thread three times in one day, it pisses people off, and you won't get any help.
#2: Why would you want to disable it if you're not in a call anyway?[/list]
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
no u st**pid f**k!!! read the other thread before opening a new thread!!!
neckarb said:
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
Click to expand...
Click to collapse
thats bcoz we don't support lazy a** like u! read the project VCABT its absolutely clear there!!
i have read it and found no mention of disabling the mic. thanks for the help though, real usefull.
so i still havent got an answer then?
i use a BT headset and its not even connected when not in a call.. only when i make a call or recieve a call does the phone connect to the headset... so i dont know what your askin for.. sorry
i am asking the fantastically simple question, how do you turn the microphone on an imate JAM OFFFFFFFF!
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
Click to expand...
Click to collapse
thank you so much mate your the first one with a straight answer, thank you again.
The microphone's not active if you're not in a call anyway. The only possible reason you'd need to turn the mic off is if you're in a call (there's a mute options for it), or if you were recording, in which case, stop recording. Please FOAD, and stop treating people as if they were put on earth to answer your pointless pathetic questions!
its because im using bt ms voice command, which leaves the mic on the magician on while im using the headset for voice command.
Hey everybody,
I was wondering if somebody knew of an app that could force the desire to output the sound through the 3.5mm jack or could write one (doesn't have to look fancy)
I found toggleheadset2 but that doesn't work for android 2.2, also found sound route switcher but has the same problem.
So can anybody please help, because my phone has problems recognizing my headphones (some waterdamage) and heading on a trip in two weeks and I don't want to annoy everybody on the plane with the sound of the movies i want to watch on my phone.
Thanks in advance and hope I was clear
bump
Has nobody any idea?
Hi All,
I have searched but cant find anything relating. I've been having this issue since 2.2.1, I cant connect to my Jabra Steel bluetooth headset. Is anyone having the same problems on 2.2.1 or 3.0?
Thanks
EDIT: SOrry guys, im stupid, I was looking at the wrong button and seeing the wrong blue light, I feel like a total tool.
Mods can you please delete this thread.
Thanks everyone.
Hi and sorry if i do not found such a topic in some discussion. I tried to search but didn´t found it yet.
My problem is that i have a new Yotaphone 2 YD201 with latest update (as far as i know) 1.1.124 , which i got OTA.
And i´m not sure if this was happening also before the update, cause i didn´t tested it before with Android 4.4.
The problem:
If i set up a call or got a call and talking some times over my bluetooth headset, the colleagues asked me that i sound like under water.
Sometimes it happens within minutes, sometimes longer...
If i switch to the mobile phones microphone everything is working correct instantly.
I tried several bluetooth headsets, which are working well on other android phones.
Then I tried the soundrecorder SW which is on the device and found out, that the bluetooth sound isn´t recorded well, means it´s very dull and quiet.
If i put my voice directly to the mobiles microphone (although bluetooth headset is still connected), the recorded sound is louder but still far away from a good quality.
But it doesn´t change, if the bluetooth headset is switched off and the soundrecorder is used directly without bluetooth headset. Still very dull and quiet.
Can anybody please test this with his Yotaphone 2 YD201 to check if only my phone has a problem, although i do not believe that it is a HW topic.
Is there some known issue or bug regarding this topic and has somebody any idea how to overcome this problem, cause without using a bluetooth headset, the phone is unaúsable at all for me.
Thx and nice evening
Cheers
neo
Meanwhile i contacted the Yotaphone Support and there was a very fast answer.
Problem is known by Developers. They are working on a fix and keep me updated.
So, lets see if and what will ever happen...
Same Yotaphone2 Bluetooth Problem
neo920768 said:
Hi and sorry if i do not found such a topic in some discussion. I tried to search but didn´t found it yet.
My problem is that i have a new Yotaphone 2 YD201 with latest update (as far as i know) 1.1.124 , which i got OTA.
And i´m not sure if this was happening also before the update, cause i didn´t tested it before with Android 4.4.
The problem:
If i set up a call or got a call and talking some times over my bluetooth headset, the colleagues asked me that i sound like under water.
Sometimes it happens within minutes, sometimes longer...
If i switch to the mobile phones microphone everything is working correct instantly.
I tried several bluetooth headsets, which are working well on other android phones.
Then I tried the soundrecorder SW which is on the device and found out, that the bluetooth sound isn´t recorded well, means it´s very dull and quiet.
If i put my voice directly to the mobiles microphone (although bluetooth headset is still connected), the recorded sound is louder but still far away from a good quality.
But it doesn´t change, if the bluetooth headset is switched off and the soundrecorder is used directly without bluetooth headset. Still very dull and quiet.
Can anybody please test this with his Yotaphone 2 YD201 to check if only my phone has a problem, although i do not believe that it is a HW topic.
Is there some known issue or bug regarding this topic and has somebody any idea how to overcome this problem, cause without using a bluetooth headset, the phone is unaúsable at all for me.
Thx and nice evening
Cheers
neo
Click to expand...
Click to collapse
Hi Neo,
I have the same probem with my Yotaphone 2.
I bought the new Bose QC30 Bluetooth, the sound is very bad for my contact.
I found something working : plug the headset Jack, and then test to phone by bluetooth.
if the jack is plugged when the bluetooth mode is selected (before or during the call), the microphone from the bluetooth is good.
if you unplug the jack during the call in bluetooth mode, the microphone is operating yet properly.
Why ???
same problem here
hi everyone,
is there any update on this issue? sadly cant use my headset anymore.
thx, luke
Isn't there a solution just above?!
Sent from my YD201 using Tapatalk
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
luke99ofone said:
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
Click to expand...
Click to collapse
Hi, thx for all the feedback- I also tried this CN Radio + the topic with the audio jack but none of them are real workarounds.
It seems that the CN -Radio brings some other issues for me, like unstable LTE connections + problems with SRVCC (switch from LTE to 3G/2G) in some handover situations. These problems were not available before.
So i installed the RU stock again and sorry to say it- sell the phone - It´s a nice phone and for people who do not need the bluetooth headset nearly the complete day- its a very good phone, with a great idea.
By the way- the support from Yota was quite good and they tried to help me as well as they confirmed the bug is known by the developer, but this help that much at the moment- so i´m back with my P9000 now...
Have fun with the mobile and appreciate the ideas of Yota devices...
Cheers
Neo
I seem to also have this issue on the EU version. Is it a matter of the antenna? I've ordered one of those cheap 3.5mm jack antennas to try out.
The odd thing is that bluetooth audio is fine with both speakers and a headset, from a variety of distances. I don't understand why the microphone is affected.
luke99ofone said:
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
Click to expand...
Click to collapse
I would be interested in how you did that, my gf is getting upset as she can't use her bluetooth handfree set while driving... she has the yd206 model, build EU 1.1.124, i already thought of installing RU buil then ota update to 1.1.134, but i wonder if this would change anything.
Thanks.
any news?
YD206 model too
Hi, I have a YD206 model and same problem with the mic with bluetooth.
I am not sure if I had this problem with Kit Kat, but as I am using bluetooth in my car everyday for my job, I think that problem was from my recently Lollipop update.
bluetooth mic: any news?
Hello, I have the same issue with YD201. Phone calls over my car's integrated bluetooth sound fine to me but the people I speak with say I sound like I am in a pipe or underwater.
Has anyone found a fix?
Thank you!
YD201
Android version: 6.0.1
Baseband version: s01_003_4240_RU1_M05
I did a factory reset on my Android 6.0.1 and the problem seems to have gone away. I did try other radio firmwares before which was a wasted effort.
octagonalman said:
I did a factory reset on my Android 6.0.1 and the problem seems to have gone away.
Click to expand...
Click to collapse
Is it still ok?
Tippfehler said:
Is it still ok?
Click to expand...
Click to collapse
Yes. I've had no problems with Bluetooth audio since.
Sent from my YD201 using Tapatalk
hello guys
i bought dm368 smartwatch yesterday. i am new for smartwatches and i dont have enough information about this.
i watched some videos on youtube thor,les,kw88 etc smartwatches gaining bluetooth call with firmware update so i have a few question
Question 1 : my dm368 can call via bluetooth call without sim card.
Question 2 : which should i install the firmware.
Question 3 : if i flash kw88 firmware to my dm368 it can gain bluetooth call feature.(i know touch screen is getting error(does anyone know how to fix this error)
Please help me i just wanna decline,accept call and speak via bluetooth on watch
Sorry for bad english
Thanks fo help...