Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
Click to expand...
Click to collapse
You can flash combined firmware for your model, then you will be able to unlock it.
El Solido said:
You can flash combined firmware for your model, then you will be able to unlock it.
Click to expand...
Click to collapse
I tried to do that but i cannot find the suitable oneif i'm not wrong because odin gave me the error md5 invalid. If you could help me it would be great.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
Click to expand...
Click to collapse
I somehow have managed to get back the recovery but it still won't flash the stock firmware. Any idea what to do next anybody?
Related
Hi everyone! I want to say thanks for all the great info you provide in these forums! You have helped me root many devices successfully. This is my first time posting a thread here, and I hope someone can help me. Here goes...
I have the Samsung Galaxy Grand Prime U.S. Cellular (SM-G530R4) that I am trying very hard to root. I tried King Root, which said it could root my device, but after doing so the first restart of the device resulted in a soft bring with big message saying Custom Binary Blocked by FRP Lock. I've done hours of research and that seems to be common problem. So I downloaded and Flashed Stock firmware back to the device successfully. I did more research on rooting my phone and all I can find for other methods is CF Autoroot. Typically this works well for me, but on this phone it is not. Here is whats happening when I try to flash CF Autoroot -
I enabled USB Debugging, restart my phone in download mode and connect to USB. In Odin I select PDA and select the CF Autoroot TAR file. Click on Start. Odin reports: File analysis-success, setupconnection, initialization, Get PIT for mapping, firmware update start, singledownload, recovery.img, NAND write start, FAIL! complete(write) operation failed.
At this point I look at the phone which on the download screen reports: Product Name-SM-G530R4, Current Binary-Samsung Official, System Status-Official, FRP Lock- On, Knox Warranty Void- 0x0, Qualcom Secure Boot- Enable (CSB), AP SWREC: S1 T1 H1 R1 A1 P1, Secure Download-Enable, CUSTOM BINARY(RECOVERY) BLOCKED BY FRP LOCK. (Note that when trying to flash CF Autoroot, the FRP lock message includes "Recovery" where as when the device was already rooted with King Root and then restarted, the message did not contain the "Recovery" but was otherwise identical and stand alone in BIG letters. With the device already rooted by King Root, FRP Lock actually bricked the device. But when trying to root with CF Autoroot, FRP lock only blocked the flashing and I am able to restart the device and load up as if nothing ever happened. I really want to root my phone, but I need your help to make FRP Lock allow flashing the custom binary, and to do so without soft bricking it!! Ive seen a lot of people with the problem of FRP Lock softbricking their phones, but I can't find anything at all on FRP Lock stopping you from even flashing the custom binary. Thank you in advance for any help you can offer!
P.S. If its of any importance The device is US Cellular SM-G530R4 - Android 5.1.1 - Baseband Version G530R4TYU1AOL2 [This is the newest Update] - Build Number LMY47X.G530R4TYU1AOL2
Hi guys i need your help urgently!
I notice a week ago that anytime i boot my s6 i get this message that custom Binary blocked by FRP LOCK and the phone wont boot at all.
So i decided to flash a stock firmware 5.1.1. It was able to flash successfully using Odin but the phone is boot loop as
its stuck at samsung logo. I have tried flashing stock recovery and blootware using Odin but i get this same error that custom Binary blocked by FRP LOCK in downloading mode.
Please what do i do to get my phone to boot"? I NEED YOUR HELP ASAP. THANK YOU
fuzybaby said:
Hi guys i need your help urgently!
I notice a week ago that anytime i boot my s6 i get this message that custom Binary blocked by FRP LOCK and the phone wont boot at all.
So i decided to flash a stock firmware 5.1.1. It was able to flash successfully using Odin but the phone is boot loop as
its stuck at samsung logo. I have tried flashing stock recovery and blootware using Odin but i get this same error that custom Binary blocked by FRP LOCK in downloading mode.
Please what do i do to get my phone to boot"? I NEED YOUR HELP ASAP. THANK YOU
Click to expand...
Click to collapse
dont worry, friend
download your stock rom
flash stock rom from odin from download mode
Okay, so I have hard bricked my Note 3. I know, I know...months back my phone died out and I got a new phone on MetroPCS. So I didn't really try to do anything with it. It would load to the Verizon screen and go no further. Well I dropped my new MPCS phone in some (a lot of) water and after dismantling and cleaning it, its dead and buried. So, for now I was going to see if I could reflash stock software for my Note 3 and enable the LTE bands for Tmobile. Blah blah, long story short. I flashed TWRP and it worked, I went to reboot it after a wipe and I think I deleted everything. I used the OF1 unbrick img to see what would happen because there was no PL1 linked, and I get:
Boot Recovery Mode
Check boot partitions
Copy from T-Flash
Boot Recovery
Write 163840 Sectors
Flash Write Failure
ddi : mmc_read failed
Odin Mode
Product Name: SM-N900V
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: Off
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T1, A1, A4, P1
Secure Download: Enable
UDC Start
So, a sign of life...however I can't get into download mode. I think I need a PL1 unbrick image to get it there. Any takers on making me one? I've read the Unbrick hard brick forum and the farthest anyone has gone was to OF1 so I didn't know if anyone was running a PL1 version that could make the image for me. Please let me know.
Thanks In Advance
huskiesmike said:
Okay, so I have hard bricked my Note 3.
Thanks In Advance
Click to expand...
Click to collapse
Is your boot loader unlocked? If not you must use Odin to flash full stock ROM and recovery. The N900V will not boot with a custom recovery unless the boot loader is unlocked. You need a working, rooted phone with a CID # that starts with 15 in order to unlock the boot loader.
Bootloader is unlocked and it was rooted, obviously not now but I had no issue running TWRP before.
huskiesmike said:
Bootloader is unlocked and it was rooted, obviously not now but I had no issue running TWRP before.
Click to expand...
Click to collapse
Did the unbrick image replace the boot loader? I have not used/need the unbrick image and I'm not sure what is in it. If boot loader is unlocked and TWRP is working you should be able to flash any n900v ROM to get it working. I'll look at the unbrick image, if I can find it.
Well, it had TWRP. I installed TWRP with the intention of flashing a new ROM to it because it was soft-bricked and stuck on the VZW flash screen. When I rebooted it didn't respond. The only response I have now is the Recovery boot mode with the OF1 unbrick.img and it won't go into download mode or recovery. No response at all without the SD card in it.
Thanks
I have this S7 Edge Verizon which a few days ago gave me a problem. I was using the phone just for a few days.While using it, social media normal stuff it self restarted ( notice that it was pretty hot, but it's a usual thing at this point ) and it got stuck in logo.
P.S: I am really familiar with this kinda stuff because I work at a phone service.
So I tried the usual stuff, wiping cache and data but it didn't solve any thing. So I decided to flash official rom. I downloaded the oreo rom from sammobile and when I tried to flash it, it just skipped all files. I thought this would be due the verizon model, because it's bootloader was locked and oem unlock wasn't enabled. I tried to flash the firmware without the bootloader and with pit but no result. Than I decided to enable oem unlock throught combination file.
When I downloaded combination file, at the website it said G935V but it actually was G935A, and somehow it flashed successfully without any problems. But after reset the phone was stuck at the very first Samsung Logo with some cpu and voltage information at the top left corner with a warning saying RPMB provisioned.
At this point I thought I might as well flash the stock firmware again but this time I got bootloader error and trying to flash it without a bootloader it would skip all files saying something like " skipping all binary files " as before. Bare in mind that during all this testing the phone got really heated. So I let it cool for a while and still nothing happened. Than I decided to flash this boot_root file I found and it actually booted up the Combination Rom. I enabled usb debugging in the settings but there was no Oem Unlock option, not even grayed out ( maybe because the rom G935A does not have the option ).
Even the USB debug enabled it still couldn't flash stock rom because of bootloader error and some binary error also and again if i didn't include bootloader it would skip all files.
I was thinking of installing a custom rom but I found out that there is not twrp avaible for s7 edge verizon because of it's locked bootloader. And if I try to install supersu through adb it just doesn't work.
Now my download section looks like this
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON (don't worrie about it, i got all the gmail info)
WARRANTY VOID: 0x0 (the warranty has expired anyways)
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B5(2, 1, 1, 1, 1 ) K1 S4
SECURE BOOT: ENABLE
IDOQ : G(42), S(12) mA
CPU SERIAL NUM : 0x1408501f
Fused open loop voltage: 970mV
RPMB PROVISIONED
The Samsung first boot up screen still has the RPMB PROVISIONED with the cpu information and also the custom flagg and I am able to boot up the combination rom.
I also tried to flash the official rom with z3x but it didn't solve anything. If you need any additional information just tell me. Any help would be greatly appreciated.
You need to download official firmware from another source. I recommend updato.com.
https://updato.com/firmware-archive-select-model?record=4F3A1B13706611E89F15FA163EE8F90B
You need to flash the latest Oreo firmware for the Verizon SM-G935V because it sounds like your phone has issues with your current bootloader. Go back to the Verizon firmware first and see if the phone works normally. Also, flash the regular CSC file not CSC_HOME.
Help
I too have the same exact problem. Has anyone figured out how to fix this?
Hi everyone,
so it was working perfectly this morning, then i factory resetted it, and used it for a few hours, but forgot to turn on oem unlocking in dev options. And then when i rebooted it it never turned on after that. it showed Custom binary blocked by frp lock on upper right corner in red color.
i had encountered this issue before so i knew the solution, i simply fired up my odin3 3.14. and started flashing my stock rom. after it was done it gave me another error
Failed to mount /system as rw and started restarting after that error.
i had encountered this issue before also, so i knew the solution, i downloaded the latest twrp for herolte, and last time when i did that it successfully installed and then i flashed encyption disabler zip, and it was a happy ending to a stressful evening. but unfortunately this time it wasnt like last time, it was one of those anime fighting comeback scenes where you think you have defeated the villain but he comes back, So this time when i tried flashing the last twrp through odin it said "FAIL!" and on the phone appeared the message "Custom binary (RECOVERY) Blocked By FRP Lock"
please help me fix this phone, i solely use it for watching movies and stuff, no sim card,
ask me any other detail that i might've forgotten to mention.
Here's download mode stats:
ODIN MODE
DOWNLOAD MODE: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
FRP LOCK: ON
Secure Download: Enabled
WARRENTY VOID: 1 (0x0500)
RP SWREV: B:8 K:6 S:7
Custom Binary(RECOVERY) Blocked by FRP Lock
You guys are my last hope, Send help.....