Related
[K1] "Unsupported menu option selected" error & where to get TimmyDean rooted 13-13?
I just got a brand new K1. Fresh out of the box with 3-3 pre-installed, I downloaded and used TimmyDean's permanent root tool, flashing a rooted 2-2 firmware. I then enabled the backdoor and ran all the OTA updates up to 14-14. This took several hours in all. I then ran the BusyBox and SU Tools install script. Everything was looking okay. I selected the choice to exit the script with reboot. The K1 turned off and came back on with the Lenovo logo, but, at the top of the screen was red writing:
Unsupported menu option selected: 1
Unrecoverable bootloader error (0x00000002).
It stops there and goes no further. No bootup.
Attempting to research the error, it seems this is not an error too many people encounter or know about, so my guess is that my only way of fixing this problem is to flash the whole thing over again from the beginning. (Unless someone here knows something about this problem. That would be tremendously helpful.)
Having already experienced what it took to go from 2-2 to 14-14 the first time with the permanent root package, I'd certainly like to shortcut it however possible. In this thread, http://forum.xda-developers.com/showthread.php?t=1404351 , TimmyDean posted a rooted 13-13 that we can start from. However, the link to the download file for it is Multiupload.com, and Multiupload.com does not seem to be up for me. Does anyone know where else I can go to try and download a copy?
I'd have posted directly in that Development thread, but, since I am an XDA noob, the forum system only allows me to post in this General section.
After experimenting with the "permanent root" package several times now, each time ending up with the "Unsupported menu option selected: 1" error after any OTA update, I have to believe there is an incompatibility between the K1 I have and the bootloader files in the "permanent root" package. I do not know if my K1 is recently manufactured and they are now doing something different with them that causes this incompatibility or what, but I felt I should warn you all that flashing the "permanent root" package could cause your K1 to not take official updates or to otherwise brick it with the "unsupported menu option" error. Perhaps the 13-13 package, which I don't have and can't test, didn't have this problem.
My serial number is CB1245XXXX. Manufacture date is "11/11/27."
I have now given up on getting root on my K1 and would just be happy to get it back to a working condition that can take Lenovo's OTA updates without bricking. I am currently trying these instructions and will update as to whether or not that resolves the problem: rootzwiki.com/topic/13877-guide-ideapad-k1-restore-to-mostly-stock-with-ota-updates/ (The forum software will not allow me to post hot links, so copy and paste that to browser.)
The rootzwiki procedure did not work to correct the problem. After any update, the tablet is bricked with the error. There are a few threads on the Lenovo support forum on this issue now, and there is no solution.
forums.lenovo.com/t5/IdeaPad-Slate-Tablets/K1-not-booting-after-update/td-p/548285
forums.lenovo.com/t5/IdeaPad-Slate-Tablets/Unrecoverable-Boot-Loader-Error/td-p/683633
I believe these old bootloader files will not work and will brick newer K1's, so my warning is:
DO NOT ATTEMPT TO ROOT YOUR K1'S. DO NOT CHANGE THE EXISTING BOOTLOADER IN ANY WAY WITH NVFLASH. SOMETHING HAS CHANGED.
This might only apply to more recently manufactured K1's, but, since we do not know when this problem begins, it is not possible to know beforehand whether or not you will brick yours.
To be on the safe side, DO NOT ATTEMPT TO ROOT YOUR K1'S. DO NOT CHANGE THE EXISTING BOOTLOADER IN ANY WAY WITH NVFLASH. SOMETHING HAS CHANGED.
Unfortunately, there was no backup option in the rooting packages, so I could not get a copy of the stock bootloader or any other files, if they are indeed of a different and newer variety. If someone has a recently manufactured K1, perhaps you can get those files and share them, because a lot of people are starting to see this problem now.
I have one with sn#1250xxxx, mfg dt 11/11/29. I wasn't even trying to root the thing. I happened during an OTA update. I tried probably all the recovery/rooting option out there. None of them worked. I have the tablet booting at lenovo screen. But I think you are right about the bootloader. If we can get the correct bootloader, we might be able to the the tablet back to life.
fix?
Has anyone come out with the fix for your issue.. I have the same issue . Used TImmy Dean's method.. and anything updating past the 02_02 (loaded from the tool I get the error... Anyone here have access to contact JimmyDean to ask him for help?
I see that he updated the tool to K1_A301_13_13_111209_US and maybe K1_A301_14_14_111209_US but all the links are dead.. anyone have a good place to download the files?
Try out the downloads on the following Lenovo's link -
download.lenovo.com/slates/k1/OTA
those are just OTs.. not image files.. If you don't have a compatable boot loader, you can't load those files.. We don't have a compatable bootloader.. so this is why we need ver 13 of timmy dean..
rezapatel said:
Try out the downloads on the following Lenovo's link -
download.lenovo.com/slates/k1/OTA
Click to expand...
Click to collapse
Can someone who's getting this bootloader error send me a pm. I put together a stock 120109 update that may work around the issue and I need someone to test.
Was this issue ever resolved, I didnt attempt to root mine, only attempted to wipe it clean and got this..
No, no real resolution. What I ended up doing was NVFlashing one of khanning's ROMs, like this one: http://forum.xda-developers.com/showthread.php?t=1560441
I don't know what's going to happen when I have to update again, such as the upcoming Ice Cream Sandwich update promised by Lenovo.
I've recently found away to fix a Galaxy S5 Active stuck in a boot loop. (This method only works if your device is on lollipop 5.0! )
Note: This method only works on the OC5 update.
More firmware support coming soon.
What happened: I accidentally made my Galaxy S5 Active get stuck in a boot loop. I couldn't find a solution for the longest time because the bootloader is locked. Time passed and I eventually found away to fix the boot loop if your devices is running Lollipop 5.0!
Solution:
1. You should always try to fix the boot loop by booting into recovery mode by holding down the Home+Volume-Up Key+Power button. Once the phone logo pops up on the screen releases the power button only, but continue to hold the Home+Volume-Up Key. If it worked is should say "Booting into recovery." or something along those lines in blue letters.
Once you're into recovery use the volume keys to navigate Up and Down. Find wipedata/factory reset. Select it with the power key and navigate down to Yes. Wait till it finishes. Then see if that fixed the problem. If not proceed to next step
2. Since the boot loader is locked it's really difficult to flash any kind of Recovery, ROM, or Stock Rom unless your phone accepts it as a valid file. So here's what you do!: (Method 1)
Download this file and save it to your desktop: https://drive.google.com/open?id=0B3UBRFq3BojVQnBSc3lCSzloYUU
Download ODIN v(3.09): http://odindownload.com/Samsung-Odin/#.VgiJ_8tViko - Extract it to your desktop.
Put your phone in download mode. (Note: Before you do this, install the correct drivers for your phone to your computer.)Make sure your phone is completely off and Hold the Home+Volume Down+Power. You will get a warning message just press the volume up key to continue.
Go to desktop and launch ODIN. After ODIN pops up, plug in your device. (Make sure you have the correct phone drivers installed)
You should see a dialog box in ODIN that say 0:[COM6] in blue. Note: It might be different for everyone, just make sure it says COM.
After that, Under "File [Download]" click "AP" Then navigate to the file you downloaded earlier called "boot.tar"
MAKE SURE RE-PARTITION IS UNCHECKED!
Leave everything else alone then click start. Wait till it says PASS! in green letters in ODIN!
(Method 2):
Go to this link download it to your desktop and follow the instructions: https://drive.google.com/file/d/0B3UBRFq3BojVdXlSUE43VzJPbEU/view?usp=sharing
Done! Your device shouldn't be in a boot loop anymore! If you have any questions let me know!
Note: Once this process is complete, your phone will permanently show a warning in your notifications saying "Unknown action detected." This happens because your phone will detect that your kernel was modified so if you don't want this to happen, then I suggest you wait for a official lollipop OS release.
UPDATE!: You should now be able to download the "Boot.tar" file. Sorry about that!
UPDATE!: New files and instructions added if the first method didn't work!
Having some major issues
First post so forgive me if this is misplaced. Before I was aware I'm unable to down grade from 5.0 or 5.1 version of sm-g870a I attempted to downgrade and apply root from version 4.4.2/4.4.4 via another XDA thread in a faulty attempt to root. At first this presented no issues until restart. At this point the phone is soft bricked and bootloops. Both download mode and system recovery ARE accessible and prior to this I had USB debug open. I have the factory cable and odin identifies the device easily. All other md5 files failed to apply OTHER than one. (4.4.4 ota) I presume because of bootlocks which I'm now aware of. I have attempted three different stock flashes via odin all from XDA all fail at authentication claiming error fused 2 binary 1. I attempted add data pull before all of this and the device ignored a request which prompted a factory reset which was odd. I have attempted installing 3 alternative stock and stock rooted 5.0 and 5.1 firmwares from XDAs threads. All of which failed, hiwever one granted me some precious Information when I slowed down the error message via recording. It states, "Package expects fingerprint of Samsung kltattactive/lteactive:4.4.2/kot49h/g870aucu1ang3:user/release-keys o0A1:user/release-keys this device has kltactive/kltactive. This tells me as far as I know that the device is showing no firmware installed and a double fed file making the attempting installation incompatible. At this point I want to start anew, I have how attempted every route accessible via XDA and feel my options are running very low other than attempting to randomly apply firmware in sequence until odin accepts one and it sticks. That sound like a brick plan however. I don't care what firmware is loaded as long as an OS is accessible. I think this is all available Information I apologize for typos I have been at this for a total of 20 hrs straight. This bootloop was a tired lapse in judgement and has cost me 5 hours of trial and error. Wiping cache fails, reformatting internally fails, as far as I know root was never successful and I THINK philz was successful installed although at this point I cannot recall. Thanks for reading and in advance for any available help. I have SOME c# experience and some java script which is zebra vs dolphin situation I only mention as to aide and explain my trainers of thought. All other languages are vague at best
Edit: I stopped bootloop with the file attached to this thread. It now boots into samsung display bht will not go further and stops there as though it still has no operating system.
Ghujii said:
First post so forgive me if this is misplaced. Before I was aware I'm unable to down grade from 5.0 or 5.1 version of sm-g870a I attempted to downgrade and apply root from version 4.4.2/4.4.4 via another XDA thread in a faulty attempt to root. At first this presented no issues until restart. At this point the phone is soft bricked and bootloops. Both download mode and system recovery ARE accessible and prior to this I had USB debug open. I have the factory cable and odin identifies the device easily. All other md5 files failed to apply OTHER than one. (4.4.4 ota) I presume because of bootlocks which I'm now aware of. I have attempted three different stock flashes via odin all from XDA all fail at authentication claiming error fused 2 binary 1. I attempted add data pull before all of this and the device ignored a request which prompted a factory reset which was odd. I have attempted installing 3 alternative stock and stock rooted 5.0 and 5.1 firmwares from XDAs threads. All of which failed, hiwever one granted me some precious Information when I slowed down the error message via recording. It states, "Package expects fingerprint of Samsung kltattactive/lteactive:4.4.2/kot49h/g870aucu1ang3:user/release-keys o0A1:user/release-keys this device has kltactive/kltactive. This tells me as far as I know that the device is showing no firmware installed and a double fed file making the attempting installation incompatible. At this point I want to start anew, I have how attempted every route accessible via XDA and feel my options are running very low other than attempting to randomly apply firmware in sequence until odin accepts one and it sticks. That sound like a brick plan however. I don't care what firmware is loaded as long as an OS is accessible. I think this is all available Information I apologize for typos I have been at this for a total of 20 hrs straight. This bootloop was a tired lapse in judgement and has cost me 5 hours of trial and error. Wiping cache fails, reformatting internally fails, as far as I know root was never successful and I THINK philz was successful installed although at this point I cannot recall. Thanks for reading and in advance for any available help. I have SOME c# experience and some java script which is zebra vs dolphin situation I only mention as to aide and explain my trainers of thought. All other languages are vague at best
Edit: I stopped bootloop with the file attached to this thread. It now boots into samsung display bht will not go further and stops there as though it still has no operating system.
Click to expand...
Click to collapse
New method for you...
irontaco1 said:
New method for you...
Click to expand...
Click to collapse
Alright this stopped the looping now, to find a proper rom. I believe. Im going tohave to wait for 5.1 in order for it to be successful, however is having 4.4.2 still on it is a bit worrisome, I predict overwriting it should be fine though. Thank you for giving me a way to at least resolve bootlooping. I believe I shoulda have safestrapped the device, but hindsight is always 20/20 eh?
Ghujii said:
Alright this stopped the looping now, to find a proper rom. I believe. Im going tohave to wait for 5.1 in order for it to be successful, however is having 4.4.2 still on it is a bit worrisome, I predict overwriting it should be fine though. Thank you for giving me a way to at least resolve bootlooping. I believe I shoulda have safestrapped the device, but hindsight is always 20/20 eh?
Click to expand...
Click to collapse
I'm glad you got past your Bootloop! If you need anymore help let me know.
Is there a way to root my galaxy s5 active [G870A] on att with 5.0? I'm getting conflicting info and not finding the root.tar I need to flash in order to roll back to 4.4.2 so I can root. Right now I'm just trying to get root. Thanks for any help or direction.
S5 Active
I'd say hold off for a while I did that exact 5 Hong with the s5 active and it bootlocks it. You need to, if you're going to do this install and use safestrap to di so and BACK UP EVERYTHING with safe strap to SD. As long as you follow those method you SHOULD be able to even soft brick it and come back from it.
shadavis08 said:
Is there a way to root my galaxy s5 active [G870A] on att with 5.0? I'm getting conflicting info and not finding the root.tar I need to flash in order to roll back to 4.4.2 so I can root. Right now I'm just trying to get root. Thanks for any help or direction.
S5 Active
Click to expand...
Click to collapse
I haven't found any successful way to to go back to Kit Kat or 4.4.2 for this phone. In fact that's why this thread exist is because people who have tried to flash back to 4.4.2 have failed and got stuck in a Bootloop. So if you plan on trying to find away make sure you back everything up and if you fail you can use this tutorial to get your phone working again.
Make sure you have "USB Debugging" on
Make sure you have the drivers for your phone installed on your PC before you start the process of looking for a root.
Yeah I tried flashing back to 4.4.2 and it was a no go . I had the stuck on 5.0 issue where download mode says "downloading do not turn off ...... " but after I wiped my phone I was able to update to 5.1.1 successfully without any "download interrupted "errors . So at least I'm not stuck on 5.0 now lol
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Although I still have that "Downloading do not turn off target " thing when I try to enter download mode! Sheesh
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
shadavis08 said:
Yeah I tried flashing back to 4.4.2 and it was a no go . I had the stuck on 5.0 issue where download mode says "downloading do not turn off ...... " but after I wiped my phone I was able to update to 5.1.1 successfully without any "download interrupted "errors . So at least I'm not stuck on 5.0 now lol
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
---------- Post added at 03:24 PM ---------- Previous post was at 03:21 PM ----------
Although I still have that "Downloading do not turn off target " thing when I try to enter download mode! Sheesh
Sent from my SAMSUNG-SM-G870A using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
There should not be anything attempting to download when you boot into ''download mode'' if there is, its highly likely there are still particulates of the last bad flash. I would as he said above, enable USB debugging and the like, and install safe strap to be safe. After safe strap is done and youve followed the tutorial which you can find in another thread on this site, boot your phone down and then power it back on, safe strap should come up first, when it does so push the ''recovery'' option to enter safe strap( someone correct me if thats wrong, my phone is currently dead/charging so i cant check) From there you can back up to an SD card, make sure you enable compression when you do.
Once thats done, WIPE YOUR PHONE, and Cache,( maybe dalvik as well if you cant find it dont worry.)and its all on SD CARD, then attempt to dirty flash( I dont recommend), or clean flash your device WITH safe strap. This typically entails downloading a .zip file and opening it THROUGH safestrap, which is done the same way as backing up your data, only via another option in the menu. Simply put; Back up data with safe strap, after thats done push back and choose FLASH, it should show you all available items it can flash from/to, pick and pray. I didnt go this route when I tried, I attempted to brute force the Bootlocked S5A, and it caused some errors that I now have reversed after much pain. If I HAD safe strapped, It may have went smoother for me, and may for you. Safestrap for us Samsung users is the same as Clockwork Mod for the rest if you weren't aware.
I'll edit this when my phone charges and I can walk you through appropriately, if need be MSG me and Ill do it as soon as I receive the message via this thread if I have not already.
hi guys! good day! i have tried the new method twice! and odin fails everytime! the problem is with the modem.bin! is there any way to fix this?
Make sure you're running lollipop and not Kit Kat and make sure you have the correct phone model. If you don't meet both those requirements then it won't work.
it has on lollipop recoverymode comes up with LRX21T.G870AUCU1B0C5. ISNT that lollipop? download mode also says ;A2, P1
abatoir said:
it has on lollipop recoverymode comes up with LRX21T.G870AUCU1B0C5. ISNT that lollipop? download mode also says ;A2, P1
Click to expand...
Click to collapse
Yeah that information is correct. You might want to download the latest version of ODIN and try again. (Make sure you're putting the modem.bin file in the correct spot in Odin.)
I think I have the latest odin.. And modem can only fit in the cp field I think. Its just not working for me. I tried doing each part separately. And the modem flash always fail.
---------- Post added at 06:58 AM ---------- Previous post was at 06:57 AM ----------
I used odin 3.10 and also tried with odin 3.7
Hey irontac. Since you came up with this fix. Are you able to tell me why those s5 go into bootloop like that? By the way mine is not in bootloop. It hangs on the AT&T logo (the glob) . I was thinking maybe I need to flash the system.img , but where can I find that. And how can I flash it by itself? Actually the phone belongs to a friend. He seems to have rooted it. But I don't know what else he messed with.
abatoir said:
Hey irontac. Since you came up with this fix. Are you able to tell me why those s5 go into bootloop like that? By the way mine is not in bootloop. It hangs on the AT&T logo (the glob) . I was thinking maybe I need to flash the system.img , but where can I find that. And how can I flash it by itself? Actually the phone belongs to a friend. He seems to have rooted it. But I don't know what else he messed with.
Click to expand...
Click to collapse
You might want to boot into recovery mode and try to factory reset it normally. If his phone is rooted you could also flash a custom rom to it and get it out of Bootloop.
I also forgot to mention you can't get ahold of the system.img because it's not released to the public.
Yeah. I wanted it back to stock. I downloaded the 5.0 cfg file. Opened it up and I realized that there is no system.img in there. Oh Well. You think it would boot if I used kitKat system.img?
abatoir said:
Yeah. I wanted it back to stock. I downloaded the 5.0 cfg file. Opened it up and I realized that there is no system.img in there. Oh Well. You think it would boot if I used kitKat system.img?
Click to expand...
Click to collapse
If you flash the Kit Kat system.img you might have to downgrade the kernel also. I would give it a try and see if it works.
So I purchased my Zenfone 2 about two weeks ago and immediately set about rooting it.
The person who owned it before me had received the OTA update 21.40.1220.1708. I checked the website and it didn't have it listed under ZE551KL so I assumed he simply forced an update for the wrong model, and set about rolling back to update 21.40.1220.1615. In the process, I deleted my OS.
From there, the phone obviously doesn't boot. I've tried installing update from SD in recovery with the zip file for 21.40.1220.1615 from ASUS' website but it says that it's an older version and cannot be used, but anyone who is familiar with the current situation knows that ASUS hasn't dropped update 21.40.1220.1708 on their website. What's worse, some people are speculating they revised the version number on the website version from 1708 to 1615, making it utterly useless in putting the OS back on my device.
To top it all off, the bootloader is still locked. I can access recovery and fastboot, but with the bootloader locked it doesn't help me that much.
Does anyone know a way of getting the OS back on my device? Any help would be appreciated.
SnowzSan said:
So I purchased my Zenfone 2 about two weeks ago and immediately set about rooting it.
The person who owned it before me had received the OTA update 21.40.1220.1708. I checked the website and it didn't have it listed under ZE551KL so I assumed he simply forced an update for the wrong model, and set about rolling back to update 21.40.1220.1615. In the process, I deleted my OS.
From there, the phone obviously doesn't boot. I've tried installing update from SD in recovery with the zip file for 21.40.1220.1615 from ASUS' website but it says that it's an older version and cannot be used, but anyone who is familiar with the current situation knows that ASUS hasn't dropped update 21.40.1220.1708 on their website. What's worse, some people are speculating they revised the version number on the website version from 1708 to 1615, making it utterly useless in putting the OS back on my device.
To top it all off, the bootloader is still locked. I can access recovery and fastboot, but with the bootloader locked it doesn't help me that much.
Does anyone know a way of getting the OS back on my device? Any help would be appreciated.
Click to expand...
Click to collapse
Figured it out.
I had to search for a stock recovery image. It had to be untouched because a modified version would be rejected because my bootloader was locked. Found one, used ADB+Fastboot to flash it on, threw update 1615 on an SDCard and it's installing right now.
can you please share that recovery....
SnowzSan said:
Figured it out.
I had to search for a stock recovery image. It had to be untouched because a modified version would be rejected because my bootloader was locked. Found one, used ADB+Fastboot to flash it on, threw update 1615 on an SDCard and it's installing right now.
Click to expand...
Click to collapse
So this the MM stock recovery for MM, correct?
Can you please share that or point me to where you got it from, appreicated.
Thanks
Went to update "YB1-X90L_170420" and as I have been normally doing I removed root, ran the update, and all was well. It installed fine and worked no problem.
I was then prompted for update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" So I started the download and when the device reboots it then fails with this string, note the error about the "build fingerprint"
Supported API: 3
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Package expects build fingerprint of Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000408_170420:user/release-keys or Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000426_170508:user/release-keys; this device has Lenovo/yeti_10_row
E:Error in @/cache/recovery/block.map
(Status 7)
Installation aborted.
I foolishly after some googling and not finding enough info opened a chat with Lenovo. The rep asked what the error was and once I showed it said that was just related to my fingerprint scanner .... really?!?!? I knew the chat was a dead spot at this point but tried to state this device has no fingerprint reader, etc.. and so on. Hope they could really tell me what the error was. Anyway the rep told me to 'ignore' the update and just carry on since my device is actually working. They then went on to state they are hardware only on the chat session, which the Lenovo site says nothing about that. They then also told me to take this up with Google as they make Android not Lenovo. So much for warranty helping anything but possibly replacing a physically broken device. Their techs are useless, seriously.
So anywho, as you see in the error the update is trying to apply but looks for "Lenovo/yeti_10_row_wifi" and is finding somewhere (in the update or my device?) "Lenovo/yeti_10_row", notice the missing "wifi" on the end of that. My 'build.prop' and other system files are untouched. I even tried resetting the device. Which after the reset I was able to once again install the "YB1-X90L_170420" update but this next update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" fails again on that same fingerprint mismatch.
Any clue what I should be looking for here? Has anyone else installed that update successfully?
Will anyone here supply me with the original (or as close as original) clean stock ROM without paying for it? I know I should have backed up with TWRP before I started doing updates, and this may well be my issue, but I didn't and not I can only restore back to an already rooted backup. Though I assume doing a reset of that rooted restore is considered clean (no root or 3rd party anything)?
thanks for any help or ideas!
MarkAllen said:
Went to update "YB1-X90L_170420" and as I have been normally doing I removed root, ran the update, and all was well. It installed fine and worked no problem.
I was then prompted for update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" So I started the download and it the device reboots then fails with this string, note the error about the "build fingerprint"
Supported API: 3
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Package expects build fingerprint of Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000408_170420:user/release-keys or Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000426_170508:user/release-keys; this device has Lenovo/yeti_10_row
E:Error in @/cache/recovery/block.map
(Status 7)
Installation aborted.
I foolishly after some googling and not finding enough info opened a chat with Lenovo. The rep asked what the error was and once I showed it said that was just related to my fingerprint scanner .... really?!?!? I knew the chat was a dead spot at this point but tried to state this device has no fingerprint reader, etc.. and so on. Hope they could really tell me what the error was. Anyway the rep told me to 'ignore' the update and just carry on since my device is actually working. They then went on to state they are hardware only on the chat session, which the Lenovo site says nothing about that. They then also told me to take this up with Google as they make Android not Lenovo. So much for warranty helping anything but possibly replacing a physically broken device. Their techs are useless, seriously.
So anywho, as you see in the error the update is trying to apply but looks for "Lenovo/yeti_10_row_wifi" and is finding somewhere (in the update or my device?) "Lenovo/yeti_10_row", notice the missing "wifi" on the end of that. My 'build.prop' and other system files are untouched. I even tried resetting the device. Which after the reset I was able to once again install the "YB1-X90L_170420" update but this next update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" fails again on that same fingerprint mismatch.
Any clue what I should be looking for here? Has anyone else installed that update successfully?
Will anyone here supply me with the original (or as close as original) clean stock ROM without paying for it? I know I should have backed up with TWRP before I started doing updates, and this may well be my issue, but I didn't and not I can only restore back to an already rooted backup. Though I assume doing a reset of that rooted restore is considered clean (no root or 3rd party anything)?
thanks for any help or ideas!
Click to expand...
Click to collapse
From what i recall the fingerprint is what is shown in the buildprop. You could try editing this but i would tread carefully if its just a minor update as it may justmess up your system if there are other mismatches during the update process.
Lenovo technical support is a complete joke, you get much better help here. Lol
Sent from my F5121 using Tapatalk
Nope every line of my build.prop, where listed, has the proper "Lenovo/yeti_10_row_wifi" that the update claims is wrong. I personally think it is this update itself but no confirmation from other users if the update
"YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90 F_USR_S000426_1705080316_WW06_BP_ROW"
has installed for them yet.
And I certainly knew how far I was *not* going to get with Lenovo but figured it couldn't hurt. I was really trying to get a stock ROM download from them or anywhere. I would love to just revert this to how it was out of the box and start over.
Well for reference I think I finally realize what is causing this (unconfirmed, but sounds feasible).
I did at one time try the "YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW" noted in another thread here from Easy firmware. I figured since it was a free download and others have done it, what could it hurt? lol (I think I know now). Anyway I forget what it was at the time but something with that rom just wasn't right for me and I decided to restore back to my TWRP backup I had made. I'm assuming my backup doesn't overwrite something that "L" version rom did and leaves some residue that reports itself as the "L" model now?
Anyway that is the only thing to me that makes sense to me that could be happening. Of course I have no original stock rom with IMG files to flash again to fix this. :/
Can anyone here confirm Easy Firmware is safe to use? Can anyone confirm their YB1-X90F rom is really that models rom?
MarkAllen said:
Well for reference I think I finally realize what is causing this (unconfirmed, but sounds feasible).
I did at one time try the "YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW" noted in another thread here from Easy firmware. I figured since it was a free download and others have done it, what could it hurt? lol (I think I know now). Anyway I forget what it was at the time but something with that rom just wasn't right for me and I decided to restore back to my TWRP backup I had made. I'm assuming my backup doesn't overwrite something that "L" version rom did and leaves some residue that reports itself as the "L" model now?
Anyway that is the only thing to me that makes sense to me that could be happening. Of course I have no original stock rom with IMG files to flash again to fix this. :/
Can anyone here confirm Easy Firmware is safe to use? Can anyone confirm their YB1-X90F rom is really that models rom?
Click to expand...
Click to collapse
Hi,
I registered for the free account. Had to email there support team to get it activate as there were problems their end. The 90F firmwares were not in the free tier so I paid the $15 through paypal to be safe, and got the 90F firmware fine. It was old and I had to run a lot of updates to get it up to date. But it got everything back to how it should be.
I blame Lenovo that we have to jump through theese hoops, but the files are legit.
Broomfundel said:
Hi,
I registered for the free account. Had to email there support team to get it activate as there were problems their end. The 90F firmwares were not in the free tier so I paid the $15 through paypal to be safe, and got the 90F firmware fine. It was old and I had to run a lot of updates to get it up to date. But it got everything back to how it should be.
I blame Lenovo that we have to jump through theese hoops, but the files are legit.
Click to expand...
Click to collapse
Thanks for that confirmation! I did end up getting a registered account ($15) used Paypal and all looked good. I ended up downloading two versions of firmware. Initially I thought I would start with the oldest knowing many updates awaited but really wanted to be sure in erasing all my previous steps just in case it didn't work or the same thing happened again.
Used "YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip" from Easy Firmware. I opted to follow the included "installer.cmd" but did not do the "unlock" or "lock" as I already was unlocked of course and did not want to lock it again. When it completed I first noted my Halo keyboard not working and things were in Chinese here and there. This post resolved both items (thanks vimalbhimani!). Pretty sure that was because I formatted all the various partitions including "country", duh. Sadly however this version was showing no further OTA updates were available at all. Maybe Lenovo has deleted some of the really old OTA downloads and they are no longer available? Not sure.
I then installed the most recent rom "YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip". This time I did not format and only flashed this newer roms boot, bootloader, factory, recovery, and system images. After the system was backup everything was in great shape and updates were available. I made a TWRP backup straight away. Then I let the first and second updates listed below download and install via OTA and had no issues. The final two I opted to save time and installed using the standard recovery from my SD card after I downloaded them from my PC. Here are direct links to those if anyone wants them and they are in order of install (descending) based on already having "YB1-X90F_USR_S000196_161104"
http://tabdl.ota.lenovomm.com/dls/v...S000239_1612091428_WW06_BP_ROW_WCAC703BC6.zip
http://tabdl.ota.lenovomm.com/dls/v...S000340_1702251540_WW06_BP_ROW_WC365253B3.zip
http://tabdl.ota.lenovomm.com/dls/v6/YB1-X90F_170420_WC76FD00EF.zip
http://tabdl.ota.lenovomm.com/dls/v...S000426_1705080316_WW06_BP_ROW_WC80C2A0F2.zip (this is the failed update that incited this thread)
All updates went great and all is well at this point. Made another TWRP backup and I plan to root again now and see if any upcoming updates later have some issue?
I just wanted to report back here if anyone was interested that I unrooted, updated the June OTA update, and was able to root again without issue.
i got the same error message and now i'm stuck. I cant install any updates and so i bought a account from easy-firmware to get the firmware ... the firmware: YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip
doesnt not work with twrp or the stock recovery... it tells me "zip file is corupt"
@MarkAllen: Can you provide a guide how you got back to the stock rom? just flashing the zips doesnt work....
i really need help...
FreddeHamm said:
i got the same error message and now i'm stuck. I cant install any updates and so i bought a account from easy-firmware to get the firmware ... the firmware: YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip
doesnt not work with twrp or the stock recovery... it tells me "zip file is corupt"
@MarkAllen: Can you provide a guide how you got back to the stock rom? just flashing the zips doesnt work....
i really need help...
Click to expand...
Click to collapse
You cannot flash the ZIP file with TWRP or stock recovery. You have to unzip the file and then flash each IMG file that you need manually while in fastboot mode (there are seven of them).
**** IF YOU FOLLOW THESE DIRECTIONS IT IS NO ONES FAULT BUT YOUR OWN IF IT SCREWS UP SOMETHING!!! ****
**** WILL TRY TO HELP PROVIDE INFO IF I CAN BUT CANNOT GUARANTEE ANYTHING. ALSO THIS ERASE ALL YOUR DATA ****
First be aware as noted in the previous post above that I tried using "YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip" intially and it worked fine to get me back up and running but once I was done no new OTA updates were showing at all. No clue why so I ended up doing it again but used the ROM named "YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip". Also note I had erased my "country" partition and flashed "country.img" which requires the info posted by vimalbhimani again linked above in my previous post. It has to be used to correct for your country, no biggie at all and worked fine for myself.
1) Unzip the ROM you downloaded to a folder on your PC
2) From command prompt go to that folder
3) Make sure from the command prompt that ADB and fastboot commands are working properly
4) Put your tablet in fastboot mode ("adb reboot bootloader")
(these next commands are directly from the "install.cmd" included with the ROM from EasyFW, I just opted to run them manually one at a time in order and I omitted the unlock and lock commands)
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot continue
That's it. Minus the Intel error code 03 for being unlocked, it should be a normal out of the box setup when it boots back up into Android.
good luck!
People that are looking for the YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip may want to take a look at this post.
In contrast to my experiences with devices made by other OEMs, it seems like the files can directly be used for downgrading the Yoga Book if you're currently using a newer version.
Moved...
Hello all. I am about done with this phone. Let me give you a quick timeline.
I had a bootloader error, so I flashed the NPN25.137-35 images to get it working
I used it for about 1 week, installing all of the OTA security updates
One morning, my phone had restarted (I know because "You must enter your pattern after a restart")
Over the course of this day, google apps starting force closing and opening some of them would soft reboot the phone.
The next day, random apps were doing it too
Finally, after one crash, the OS never came back up, it was bootlooping
Upon a hard restart, the phone only boots into bootloader.
This is where I am now. I have downloaded NPN...35-5, NPNS...93-10, and NPNS...92.14. Unfortunately, trying to flash any of these give me a "prevaildation failed security update downgrade" error on every partition I try to flash. The phone just bootloops when I try to restart it.
Things I have tried:
Using fastboot to manually install one of the 3 packages mentioned above.
Using a toolkit to automate the install of the 3 packages.
Using Motorola Device Manager (Never got it to launch)
Flashing the blankflash bin (No usable image file found)
Android OEM unlock setting was not set before this crash, so I cannot unlock the bootloader.
Praying to various deities.
Unzipping the packages, editing the *info.txt file into androidinfo.txt and rezipping to use as an update package (Invalid info.txt error)
I have no idea what to do next. I find it frustrating that Motorola doesn't differentiate between 32GB, 64GB, Amazon ads, no amazon ads, US, EU, or indian variant in it's model numbers! Everything is just "XT1687" and none of the update files are named with words, so knowing what the hell I'm flashing is impossible.
So, frustrations aside, does anyone have any suggestions as to how I can get this phone working again. On a side note, the only thing that I can think of that would cause such a cascading failure from Stock OS is RAM or Storage corruption / failing. Any thoughts on that as well?
=~=~=~=~= SOLUTION FOUND =~=~=~=~=
This may not be a good solution for anyone else that has this issue, but recently Oreo came out and the OTA update was captured. I was able to flash the new OTA because it had a higher security level and at least got the phone bootable.
Do you know what software channel you were on? E.g. retus, retla, etc? If your phone was completely up to date with the OTA, then you can't use a firmware version of less than 92-14 or 93-14. Whether or not you use 92 or 93 depends on the channel.
Locked bootloader limits other possibilities unfortunately.
Retus. I can't guarantee it, but that looks familiar to me, like I had seen it somewhere in the "about phone" section. Is there a released Stock image that has the current security patch? I can't find it on XDA and I'm not trusting androidfixfiles.info or a link in a youtube video.
93-14 hasn't been leaked yet. So you'll be stuck for now.
Kilo__ said:
I have no idea what to do next. I find it frustrating that Motorola doesn't differentiate between 32GB, 64GB, Amazon ads, no amazon ads, US, EU, or indian variant in it's model numbers! Everything is just "XT1687" and none of the update files are named with words, so knowing what the hell I'm flashing is impossible.
So, frustrations aside, does anyone have any suggestions as to how I can get this phone working again. On a side note, the only thing that I can think of that would cause such a cascading failure from Stock OS is RAM or Storage corruption / failing. Any thoughts on that as well?
Click to expand...
Click to collapse
As a last resort you might try booting TWRP in fastboot mode, download and flash the TWRP flashable version of NPNS25.137-93-14. and see if that gets you back to a working phone. Just a suggestion. I don't know if it will boot when the bootloader is locked but it is worth a try.
pastorbob62 said:
As a last resort you might try booting TWRP in fastboot mode, download and flash the TWRP flashable version of NPNS25.137-93-14. and see if that gets you back to a working phone. Just a suggestion. I don't know if it will boot when the bootloader is locked but it is worth a try.
Click to expand...
Click to collapse
The phone was completely stock. It has the stock recovery and bootloader.
Kilo__ said:
The phone was completely stock. It has the stock recovery and bootloader.
Click to expand...
Click to collapse
I get that. What I am suggesting is not installing TWRP, but booting it from fastboot, if it is even possible. Given your results trying to flash a ROM I would say not. But what do you have to lose by trying?
pastorbob62 said:
I get that. What I am suggesting is not installing TWRP, but booting it from fastboot, if it is even possible. Given your results trying to flash a ROM I would say not. But what do you have to lose by trying?
Click to expand...
Click to collapse
I've tried that with a locked bootloader myself, it doesn't allow a non-signed image to boot. OP should give it a go as a 'hail Mary' attempt, but I wouldn't be holding my breath.
I've never heard of a phone that was fully stock with no mods or flashing ever done on it getting a bootloader error. The only bootloader error I am aware of is when the bootloader and ROM build are mismatched which doesn't happen unless the phone is being manually flashed. Was the phone on a custom ROM and you tried to return to full stock? Did you purchase the phone used?
If no to both exactly what did you see when you got the bootloader error? What was the message and what was the phone doing?
People who are on full stock with a locked bootloader don't usually flash system images so your story is a little hard for me to understand unless there is more to it. Normally a factory reset would be the logical solution when your phone is acting odd--flashing a system image seems pretty extreme and it sounds like flashing the wrong system image might be the cause of your current problems.
jhs39 said:
I've never heard of a phone that was fully stock with no mods or flashing ever done on it getting a bootloader error. The only bootloader error I am aware of is when the bootloader and ROM build are mismatched which doesn't happen unless the phone is being manually flashed. Was the phone on a custom ROM and you tried to return to full stock? Did you purchase the phone used?
If no to both exactly what did you see when you got the bootloader error? What was the message and what was the phone doing?
People who are on full stock with a locked bootloader don't usually flash system images so your story is a little hard for me to understand unless there is more to it. Normally a factory reset would be the logical solution when your phone is acting odd--flashing a system image seems pretty extreme and it sounds like flashing the wrong system image might be the cause of your current problems.
Click to expand...
Click to collapse
I agree. :good:
While my phone was wholly stock, I am not new to phone rooting or custom ROMS. I bought the phone from someone who was trying to unlock it. They screwed something up and couldn't get the phone to boot. I bought it, flashed the NPN25.137-35 image after reading plenty of XDA posts about it. This one was the Retus / North America stock image. Flashed using the suggested guidelines that are along the lines of "fb_oem_mode ... flash oem oem.bin ... flash partition sparsechunk1.img" (Something like that). That got it running and once booted, it had many OTAs update in quick succession. After about a week the phone started having trouble. Google apps would crash frequently, then non-google apps started crashing and restarting my phone. After one said restart, the phone would only bootloop. I tried rebooting into recovery to do a factory reset and got the bootloader instead. I can go take a look at the bootloader and see if it says it's secure / oem or what
Kilo__ said:
While my phone was wholly stock, I am not new to phone rooting or custom ROMS. I bought the phone from someone who was trying to unlock it. They screwed something up and couldn't get the phone to boot. I bought it, flashed the NPN25.137-35 image after reading plenty of XDA posts about it. This one was the Retus / North America stock image. Flashed using the suggested guidelines that are along the lines of "fb_oem_mode ... flash oem oem.bin ... flash partition sparsechunk1.img" (Something like that). That got it running and once booted, it had many OTAs update in quick succession. After about a week the phone started having trouble. Google apps would crash frequently, then non-google apps started crashing and restarting my phone. After one said restart, the phone would only bootloop. I tried rebooting into recovery to do a factory reset and got the bootloader instead. I can go take a look at the bootloader and see if it says it's secure / oem or what
Click to expand...
Click to collapse
Try flashing just the stock recovery, as it sounds like that is corrupt. Ideally you'd want to get a recovery that was the same build as you were on after all the OTAs had installed. At least you'd hope that that would give you the factory reset option.
If that doesn't work, there's fastboot commands to erase user data, cache, which would be pretty much what a factory reset would do. Hope you had your data backed up.
Oreo OTA came out recently. Someone grabbed the update file and uploaded it. I was able to flash it and get the phone to boot. The verdict is still out on if it'll be stable.