Hello all. I am about done with this phone. Let me give you a quick timeline.
I had a bootloader error, so I flashed the NPN25.137-35 images to get it working
I used it for about 1 week, installing all of the OTA security updates
One morning, my phone had restarted (I know because "You must enter your pattern after a restart")
Over the course of this day, google apps starting force closing and opening some of them would soft reboot the phone.
The next day, random apps were doing it too
Finally, after one crash, the OS never came back up, it was bootlooping
Upon a hard restart, the phone only boots into bootloader.
This is where I am now. I have downloaded NPN...35-5, NPNS...93-10, and NPNS...92.14. Unfortunately, trying to flash any of these give me a "prevaildation failed security update downgrade" error on every partition I try to flash. The phone just bootloops when I try to restart it.
Things I have tried:
Using fastboot to manually install one of the 3 packages mentioned above.
Using a toolkit to automate the install of the 3 packages.
Using Motorola Device Manager (Never got it to launch)
Flashing the blankflash bin (No usable image file found)
Android OEM unlock setting was not set before this crash, so I cannot unlock the bootloader.
Praying to various deities.
Unzipping the packages, editing the *info.txt file into androidinfo.txt and rezipping to use as an update package (Invalid info.txt error)
I have no idea what to do next. I find it frustrating that Motorola doesn't differentiate between 32GB, 64GB, Amazon ads, no amazon ads, US, EU, or indian variant in it's model numbers! Everything is just "XT1687" and none of the update files are named with words, so knowing what the hell I'm flashing is impossible.
So, frustrations aside, does anyone have any suggestions as to how I can get this phone working again. On a side note, the only thing that I can think of that would cause such a cascading failure from Stock OS is RAM or Storage corruption / failing. Any thoughts on that as well?
=~=~=~=~= SOLUTION FOUND =~=~=~=~=
This may not be a good solution for anyone else that has this issue, but recently Oreo came out and the OTA update was captured. I was able to flash the new OTA because it had a higher security level and at least got the phone bootable.
Do you know what software channel you were on? E.g. retus, retla, etc? If your phone was completely up to date with the OTA, then you can't use a firmware version of less than 92-14 or 93-14. Whether or not you use 92 or 93 depends on the channel.
Locked bootloader limits other possibilities unfortunately.
Retus. I can't guarantee it, but that looks familiar to me, like I had seen it somewhere in the "about phone" section. Is there a released Stock image that has the current security patch? I can't find it on XDA and I'm not trusting androidfixfiles.info or a link in a youtube video.
93-14 hasn't been leaked yet. So you'll be stuck for now.
Kilo__ said:
I have no idea what to do next. I find it frustrating that Motorola doesn't differentiate between 32GB, 64GB, Amazon ads, no amazon ads, US, EU, or indian variant in it's model numbers! Everything is just "XT1687" and none of the update files are named with words, so knowing what the hell I'm flashing is impossible.
So, frustrations aside, does anyone have any suggestions as to how I can get this phone working again. On a side note, the only thing that I can think of that would cause such a cascading failure from Stock OS is RAM or Storage corruption / failing. Any thoughts on that as well?
Click to expand...
Click to collapse
As a last resort you might try booting TWRP in fastboot mode, download and flash the TWRP flashable version of NPNS25.137-93-14. and see if that gets you back to a working phone. Just a suggestion. I don't know if it will boot when the bootloader is locked but it is worth a try.
pastorbob62 said:
As a last resort you might try booting TWRP in fastboot mode, download and flash the TWRP flashable version of NPNS25.137-93-14. and see if that gets you back to a working phone. Just a suggestion. I don't know if it will boot when the bootloader is locked but it is worth a try.
Click to expand...
Click to collapse
The phone was completely stock. It has the stock recovery and bootloader.
Kilo__ said:
The phone was completely stock. It has the stock recovery and bootloader.
Click to expand...
Click to collapse
I get that. What I am suggesting is not installing TWRP, but booting it from fastboot, if it is even possible. Given your results trying to flash a ROM I would say not. But what do you have to lose by trying?
pastorbob62 said:
I get that. What I am suggesting is not installing TWRP, but booting it from fastboot, if it is even possible. Given your results trying to flash a ROM I would say not. But what do you have to lose by trying?
Click to expand...
Click to collapse
I've tried that with a locked bootloader myself, it doesn't allow a non-signed image to boot. OP should give it a go as a 'hail Mary' attempt, but I wouldn't be holding my breath.
I've never heard of a phone that was fully stock with no mods or flashing ever done on it getting a bootloader error. The only bootloader error I am aware of is when the bootloader and ROM build are mismatched which doesn't happen unless the phone is being manually flashed. Was the phone on a custom ROM and you tried to return to full stock? Did you purchase the phone used?
If no to both exactly what did you see when you got the bootloader error? What was the message and what was the phone doing?
People who are on full stock with a locked bootloader don't usually flash system images so your story is a little hard for me to understand unless there is more to it. Normally a factory reset would be the logical solution when your phone is acting odd--flashing a system image seems pretty extreme and it sounds like flashing the wrong system image might be the cause of your current problems.
jhs39 said:
I've never heard of a phone that was fully stock with no mods or flashing ever done on it getting a bootloader error. The only bootloader error I am aware of is when the bootloader and ROM build are mismatched which doesn't happen unless the phone is being manually flashed. Was the phone on a custom ROM and you tried to return to full stock? Did you purchase the phone used?
If no to both exactly what did you see when you got the bootloader error? What was the message and what was the phone doing?
People who are on full stock with a locked bootloader don't usually flash system images so your story is a little hard for me to understand unless there is more to it. Normally a factory reset would be the logical solution when your phone is acting odd--flashing a system image seems pretty extreme and it sounds like flashing the wrong system image might be the cause of your current problems.
Click to expand...
Click to collapse
I agree. :good:
While my phone was wholly stock, I am not new to phone rooting or custom ROMS. I bought the phone from someone who was trying to unlock it. They screwed something up and couldn't get the phone to boot. I bought it, flashed the NPN25.137-35 image after reading plenty of XDA posts about it. This one was the Retus / North America stock image. Flashed using the suggested guidelines that are along the lines of "fb_oem_mode ... flash oem oem.bin ... flash partition sparsechunk1.img" (Something like that). That got it running and once booted, it had many OTAs update in quick succession. After about a week the phone started having trouble. Google apps would crash frequently, then non-google apps started crashing and restarting my phone. After one said restart, the phone would only bootloop. I tried rebooting into recovery to do a factory reset and got the bootloader instead. I can go take a look at the bootloader and see if it says it's secure / oem or what
Kilo__ said:
While my phone was wholly stock, I am not new to phone rooting or custom ROMS. I bought the phone from someone who was trying to unlock it. They screwed something up and couldn't get the phone to boot. I bought it, flashed the NPN25.137-35 image after reading plenty of XDA posts about it. This one was the Retus / North America stock image. Flashed using the suggested guidelines that are along the lines of "fb_oem_mode ... flash oem oem.bin ... flash partition sparsechunk1.img" (Something like that). That got it running and once booted, it had many OTAs update in quick succession. After about a week the phone started having trouble. Google apps would crash frequently, then non-google apps started crashing and restarting my phone. After one said restart, the phone would only bootloop. I tried rebooting into recovery to do a factory reset and got the bootloader instead. I can go take a look at the bootloader and see if it says it's secure / oem or what
Click to expand...
Click to collapse
Try flashing just the stock recovery, as it sounds like that is corrupt. Ideally you'd want to get a recovery that was the same build as you were on after all the OTAs had installed. At least you'd hope that that would give you the factory reset option.
If that doesn't work, there's fastboot commands to erase user data, cache, which would be pretty much what a factory reset would do. Hope you had your data backed up.
Oreo OTA came out recently. Someone grabbed the update file and uploaded it. I was able to flash it and get the phone to boot. The verdict is still out on if it'll be stable.
Related
I have had my Maxx HD since launch and unlocked very soon after it became available,
Recently I downgraded from the last OTA with matgroffs 1.21 utility and enjoyed a wonderful clean slate experience but after a while (today) I went for the OTA to get prepared for KK coming soon hopefully, the install failed entirely and my bootloader is now back in a locked state the phone is stuck in fastboot and will not take a flash from any utility on here, 1.21, 1.3x 2.0 ext including rsd lite.(RSD will not even detect the phone)
Ive tried the utilities on Mac and Windows 7, nothing has worked so I broke down and called verizon and ordered a recertified razr HD for a discounted price.
So just a warning there is a way the bootloader can get relocked. will take a picture and load soon to show the screen of the phone incase someone can help. Just a side note my vibrate motor failed and I have been having 4g radio problems before I went back on matgroffs utility.
You tried house of moto to fastboot flash 98.30.1? Sux they found a way to relock them...
Sent from my XT907 using Tapatalk
This only shows up when you get the GPT error. It will still be unlocked once you get this restored. This came up when the OTA was released. A few people with unlocked BL had this GPT error. There's a fix somewhere around here, just search for the error.
RikRong said:
This only shows up when you get the GPT error. It will still be unlocked once you get this restored. This came up when the OTA was released. A few people with unlocked BL had this GPT error. There's a fix somewhere around here, just search for the error.
Click to expand...
Click to collapse
@AndroidGreg
There's a line in the fastboot xml file with gpt_main0.bin (somithing really similar to that, been a while since I flashed it...) and all that's necessary is removing that line and flashing the fastboot with rsd, or just manually flash the fastboot skipping that partition, either or will work and fix the problem. Even though the bootloader is unlocked, that particular partition IS still controlled by securtiy and is blocked from downgrading -- luckily for us the partition table never changed between rom versions so it's perfectly safe to flash or not to flash it.
I've never flashed with RSD, but IIRC, there's also two more lines in the fastboot's xml that need to be removed for it to properly flash. I've only flashed my phone with moto-fastboot from linux and used MythTools from windows -- MythTools is an interactive script for the Atrix HD to flash stock fastboots, root, unlock the bootloader, flash a custom recovery, boot logos, and soon different radios -- Similar to Mattlgroff's tool.
The Atrix HD has the exact same issue with that partition.
download the sbf file from http://sbf.droid-developers.org/phone.php?device=5
install these drivers https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/action/auth
connect the phone in fastboot mode.
now extract the "fastboot_rsd.zip " to a folder.
extract the contents of the downloaded sbf/xml file into the fastboot_rsd.zip folder
execute "flash_fastboot_erase_userdata"
worth a shot.
always works for me..
good luck.
RSD does not detect the phone at all, only the quick utilities did and they failed. Verizon overnighted my new phone and its here already, not unlockable im just gona root and keep it for a while till I switch to strait talk with the nexus 5, I cant afford $100 a month anymore anyway.
First off, thanks to the OP for posting this. This was exactly my thought on getting the KK update when it arrived then building phone back up with the mods and apps I have currently - flash back using 1.21, update, use TiBu to reinstall everything. Sux to see that didn't work, but thank you for posting the warning to others.
Not that I'm hoping to see others attempt this and fail or somewhat ruin their phone, but has anyone else had this experience? Anyone verify this method isn't possible to keep unlocked bootloader and a fully working device?
If not possible, hopefully someone will build a flashable version of the OTA KK update when it FINALLY arrives. I'm way too unstock for the update to work OTA, that's a fact.
LifeAsADroid said:
First off, thanks to the OP for posting this. This was exactly my thought on getting the KK update when it arrived then building phone back up with the mods and apps I have currently - flash back using 1.21, update, use TiBu to reinstall everything. Sux to see that didn't work, but thank you for posting the warning to others.
Not that I'm hoping to see others attempt this and fail or somewhat ruin their phone, but has anyone else had this experience? Anyone verify this method isn't possible to keep unlocked bootloader and a fully working device?
If not possible, hopefully someone will build a flashable version of the OTA KK update when it FINALLY arrives. I'm way too unstock for the update to work OTA, that's a fact.
Click to expand...
Click to collapse
It only shows that his BL is locked because of the GPT error. I can assure you it is still unlocked. Many, many people updated and we still have unlocked BLs. Heck, I've flashed the latest OTA on my M and HD with RSD and am still good. He just needs to fix the error, but he have up and got another phone.
RikRong said:
It only shows that his BL is locked because of the GPT error. I can assure you it is still unlocked. Many, many people updated and we still have unlocked BLs. Heck, I've flashed the latest OTA on my M and HD with RSD and am still good. He just needs to fix the error, but he have up and got another phone.
Click to expand...
Click to collapse
Exactly. The Atrix HD gives us this error if we flashed the stock Mexican firmware (our latest) and try to flash anything below it, or the Bell firmware (2nd newest) and anything below that, and so on and so forth. All that's necessary is to remove the gpt flashing line and go again....just like we have to remove the oem lines from the fastboot xml.
First time I had that error, I went WTF (the first flash after unlocking my bootloader if ya'll's curious), knew that GPT is a partition table from grub experience, figured that the partition table has never changed since stock ICS roms, removed the GPT line, flashed ICS, and I was happy.
I'd love to be able to combine all the data, system, cache, and any other partition that don't need a fixed place (like modem, etc) and be able to use ZFS or BTRFS volumes to maximize the amount of storage we can have -- I've always wondered why they don't do something like that already...
Ok 3 computers 1 xp and 2 windows 7, nothing, mac nothing, even made a factory cable because the battery just got to low, nothing, no computer will detect it, using any of the 3 motorola branded usb cables plugged directly into the laptops. Now the utilities from matgroff and the other guy (cant think of his name but he made the 2.0 utility) will not even try to flash the phone they say please plug a phone in that is in fastboot mode, I
Serious question, but have you tried Linux? My old Bravo wasn't detected by Windows (XP or 7, been 2 years now) after a bad RSD flash, but I was able to manually flash it from Linux (either Manjaro or Debian Testing). After that, to this day it'll flash with RSD, but it isn't detected properly. I still flash it, and almost everything else, from Linux because I don't trust flashing from Windows anymore. I made an exception recently to help with a tool and because my Linux partition was down for a month.
LifeAsADroid said:
First off, thanks to the OP for posting this. This was exactly my thought on getting the KK update when it arrived then building phone back up with the mods and apps I have currently - flash back using 1.21, update, use TiBu to reinstall everything. Sux to see that didn't work, but thank you for posting the warning to others.
Not that I'm hoping to see others attempt this and fail or somewhat ruin their phone, but has anyone else had this experience? Anyone verify this method isn't possible to keep unlocked bootloader and a fully working device?
Click to expand...
Click to collapse
I tried doing the exact same thing as the OP - factory reset to "stock" and then flash back up in preparation for KK, after using TiBu to save everything and using SafeStrap to make a Nandroid (very thankful I did). I ended up with the identical screen that the OP had, even stating that my previously unlocked BL had been apparently "relocked." For me, RSD Lite did recognize my phone (I updated RSD to the latest version beforehand), however it would not flash anything for me (the flashing process would start and then immediately say "failed").
See my post for the details and the solution I used: http://forum.xda-developers.com/showthread.php?t=2674431.
I was completely freaked out for a couple of hours until I stumbled upon bweN diorD's GPT partition fix. And then everything was fine for me.
Hope this helps anyone who falls into the same trap.
AndroidGreg said:
I have had my Maxx HD since launch and unlocked very soon after it became available,
Recently I downgraded from the last OTA with matgroffs 1.21 utility and enjoyed a wonderful clean slate experience but after a while (today) I went for the OTA to get prepared for KK coming soon hopefully, the install failed entirely and my bootloader is now back in a locked state the phone is stuck in fastboot and will not take a flash from any utility on here, 1.21, 1.3x 2.0 ext including rsd lite.(RSD will not even detect the phone)
Ive tried the utilities on Mac and Windows 7, nothing has worked so I broke down and called verizon and ordered a recertified razr HD for a discounted price.
So just a warning there is a way the bootloader can get relocked. will take a picture and load soon to show the screen of the phone incase someone can help. Just a side note my vibrate motor failed and I have been having 4g radio problems before I went back on matgroffs utility.
Click to expand...
Click to collapse
I had this same problem when i tried to go back to stock a while back. You need to flash the gpt_main0.bin file to fix it. Here are the steps I used to fix the problem: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
Another user took my steps and edited a script so give this a shot if you want to run something thats automatic: http://forum.xda-developers.com/showpost.php?p=48587194&postcount=89
scoobaspeaz said:
I had this same problem when i tried to go back to stock a while back. You need to flash the gpt_main0.bin file to fix it. Here are the steps I used to fix the problem: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
Another user took my steps and edited a script so give this a shot if you want to run something thats automatic: http://forum.xda-developers.com/showpost.php?p=48587194&postcount=89
Click to expand...
Click to collapse
@AndroidGreg, do you still have the phone?
Sent from my DROID RAZR HD using Xparent BlueTapatalk 2
Hey,
I just wanted to inform you about an issue that happens in TWRP. I just bricked my Pixel by switching to slot B without flashing a bootloader in slot B. I think TWRP should inform the user that rebooting will brick the device. What are your thought on that? It could be done similar to how TWRP informs the user to install supersu if the phone isnt rooted.
This would be really helpful as it would prevent many people like myself from bricking their phones.
Now if I connect my pixel it only shows Qualcomm HS-USB Diagnostics 900E (COM3). No bootloader, fastboot, or recovery is present.
Here are a coupe of links of other people that did the same thing:
https://productforums.google.com/forum/#!topic/phone-by-google/sXjCoQ8glac
http://forum.xda-developers.com/pixel-xl/help/pixelxl-bricked-t3517310
Thanks!
Edit
I contacted the devolper of TWRP and he says that it should have boot loader regardless.
Here is the history: At work 3pm, froze Android system apk and some other telephone apps to troubleshoot something, I know I shouldn't do this. Resulted into boot loop. Go into twrp recovery and wipe data. It boots up fine and I see it downloading updates but it never goes through, I attempt to go back to recovery and apparently it's back to the stock recovery even though I originally had TWRP rc1.
I get home at 7 pm, I want to install TWRP rc1 so I send the command to boot into TWRP and then I install the zip, then I install sr5 SuperSU. I change to slot b and it's been bricked since.
It arrived November patch and it stayed like that since I was rooted. It attempted to install 7.1.1 but it returns installation problem. I think the bootloader was removed because of the failed update.
Your in download mode. I had this happen once on my Nexus 7. I held power for 90 seconds and it went back to bootloader. However I dont know about the pixel. Its still a new and uncharted device.
You also have to realize TWRP is in an unstable stage. You really should not flash anything until its in final release mode. I know I know... Hindsight is 20/20.
If you have insurance you could get it replaced.
Good luck.
sorry to hear dude..
bahehs said:
I think TWRP should inform the user that rebooting will brick the device. What are your thought on that?
Click to expand...
Click to collapse
I'm just curious. Have you ever donated any money to TWRP for the free developmental software they provide for free to the community to try/test with for free?
bahehs said:
I just bricked my Pixel by switching to slot B without flashing a bootloader in slot B.
Click to expand...
Click to collapse
Does anyone have an understanding about how something like this could potentially happen? Do these phones ship without information on the second slot? After my phone OTA updated, I switched slots without issue back to the previous version by following the information from Android Police. I'm not clear on what exactly would need to happen for the noted situation, and how someone could potentially get into a similar situation, unless the phone ships without information on the second slot. Switching slots worked without issue the times I tried it, but my phone had been through a typical OTA update before switching slots, so there was definitely information on both slots when I tried it.
Just an FYI: I am running Slot B on my device. Never tried Slot A. Just an FYI
Scott said:
Just an FYI: I am running Slot B on my device. Never tried Slot A. Just an FYI
Click to expand...
Click to collapse
Same, mine is on slot B. Dunno if it came that way, but it is only two days old. I let it take the OTA then flashed Francos kernel and then booted the root su image.
I really regret not watching more closely how all of impacted which slot it was on.
Sent from my Pixel XL using XDA Labs
Everytime you get OTA update you will switch slots. If you update via flashall it will say on the same slot.
This mode can't be a complete brick but it doesn't look like anyone has a solution yet. Maybe we will need some HTC tool?
Also when you root or modify you take responsibility for anything that happens. There is always a chance of a brick. At least Google will still probably warranty these devices.
Sent from my Pixel using Tapatalk
CZ Eddie said:
I'm just curious. Have you ever donated any money to TWRP for the free developmental software they provide for free to the community to try/test with for free?
Click to expand...
Click to collapse
This comment is unnecessary and serves no purpose in this thread.
Sent from my Pixel XL using XDA-Developers mobile app
I'm okay with that.
Updated op with more info
I installed TWRP while in the car riding with my girlfriend. I had some issues with the mobile radio showing no SIM card. Due to my limited options, I tried switching rom slots. It booted into the old software and said there was an update etc. I don't think switching rom slots leads to bricking if no other mods were done.
reb1995 said:
I installed TWRP while in the car riding with my girlfriend. I had some issues with the mobile radio showing no SIM card. Due to my limited options, I tried switching rom slots. It booted into the old software and said there was an update etc. I don't think switching rom slots leads to bricking if no other mods were done.
Click to expand...
Click to collapse
were you rooted because I had an ota in process wich failed while I was rooted which I think was the cause of the issue.
I kind of had the impression none of the stuff we're flashing is the bootloader itself. Isn't the bootloader the Android equivalent of Windows BIOS? Doesn't the bootloader load the boot image? Then the boot image mounts the system partition? So how could anything we're flashing cripple the bootloader?
Sent from my Pixel XL using Tapatalk
bahehs said:
were you rooted because I had an ota in process wich failed while I was rooted which I think was the cause of the issue.
Click to expand...
Click to collapse
Sorry for the long delay. No I was not rooted.
yearn2burn said:
I kind of had the impression none of the stuff we're flashing is the bootloader itself. Isn't the bootloader the Android equivalent of Windows BIOS? Doesn't the bootloader load the boot image? Then the boot image mounts the system partition? So how could anything we're flashing cripple the bootloader?
Click to expand...
Click to collapse
Bump
The problem is that the phone ships with an empty slot. If you try to boot it your permanently bricked do to having no bootloader on that slot. Once you take an OTA both slots have data and you're safe.
bahehs said:
were you rooted because I had an ota in process wich failed while I was rooted which I think was the cause of the issue.
Click to expand...
Click to collapse
You are right a failed OTA could brick a pixel phone
DR3W5K1 said:
The problem is that the phone ships with an empty slot. If you try to boot it your permanently bricked do to having no bootloader on that slot. Once you take an OTA both slots have data and you're safe.
You are right a failed OTA could brick a pixel phone
Click to expand...
Click to collapse
There is only one bootloader though so that's the confusing part. Still not sure how some people bricked completely. The bootloader is the first thing to load and tells the phone which slot to boot. Each slot does have its own boot, system, and vendor though. Been discussing this a lot on some other threads and there is still no answer has to what some of these people did internally that messed up their phones
aholeinthewor1d said:
There is only one bootloader though so that's the confusing part. Still not sure how some people bricked completely. The bootloader is the first thing to load and tells the phone which slot to boot. Each slot does have its own boot, system, and vendor though. Been discussing this a lot on some other threads and there is still no answer has to what some of these people did internally that messed up their phones
Click to expand...
Click to collapse
Failed bootloader flash? The Google .IMG files contain bootloader's.
EDIT I do believe the flash_all.sh flashes the bootloader
So you cant even run ADB commands ( a.k.a Bootloader / Recovery mode ), its a hard brick or soft ?
Does your PC detect the device when its on and connected via USB ?
Why did you switch slots in the first place ? if your taking an OTA on a rooted device with SU an OTA wont even apply via TWRP, you have to manually flash with the flash-all.bat script or part by part and the A / B boot slots are handles by the updates so you don't accidentally boot with a slot with no bootloader.
There is no need to swap A / B manually and if your going to flash and want to play with the A / B slots you should at least flash the partitions first but hindsight is a wonderful thing.
Aboot here might be your friend, but as this device is still quite new to many devs and or the tools might not be publicly available . . .
Went to update "YB1-X90L_170420" and as I have been normally doing I removed root, ran the update, and all was well. It installed fine and worked no problem.
I was then prompted for update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" So I started the download and when the device reboots it then fails with this string, note the error about the "build fingerprint"
Supported API: 3
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Package expects build fingerprint of Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000408_170420:user/release-keys or Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000426_170508:user/release-keys; this device has Lenovo/yeti_10_row
E:Error in @/cache/recovery/block.map
(Status 7)
Installation aborted.
I foolishly after some googling and not finding enough info opened a chat with Lenovo. The rep asked what the error was and once I showed it said that was just related to my fingerprint scanner .... really?!?!? I knew the chat was a dead spot at this point but tried to state this device has no fingerprint reader, etc.. and so on. Hope they could really tell me what the error was. Anyway the rep told me to 'ignore' the update and just carry on since my device is actually working. They then went on to state they are hardware only on the chat session, which the Lenovo site says nothing about that. They then also told me to take this up with Google as they make Android not Lenovo. So much for warranty helping anything but possibly replacing a physically broken device. Their techs are useless, seriously.
So anywho, as you see in the error the update is trying to apply but looks for "Lenovo/yeti_10_row_wifi" and is finding somewhere (in the update or my device?) "Lenovo/yeti_10_row", notice the missing "wifi" on the end of that. My 'build.prop' and other system files are untouched. I even tried resetting the device. Which after the reset I was able to once again install the "YB1-X90L_170420" update but this next update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" fails again on that same fingerprint mismatch.
Any clue what I should be looking for here? Has anyone else installed that update successfully?
Will anyone here supply me with the original (or as close as original) clean stock ROM without paying for it? I know I should have backed up with TWRP before I started doing updates, and this may well be my issue, but I didn't and not I can only restore back to an already rooted backup. Though I assume doing a reset of that rooted restore is considered clean (no root or 3rd party anything)?
thanks for any help or ideas!
MarkAllen said:
Went to update "YB1-X90L_170420" and as I have been normally doing I removed root, ran the update, and all was well. It installed fine and worked no problem.
I was then prompted for update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" So I started the download and it the device reboots then fails with this string, note the error about the "build fingerprint"
Supported API: 3
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Package expects build fingerprint of Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000408_170420:user/release-keys or Lenovo/yeti_10_row_wifi/yeti:6.0.1/MMB29M/LenovoYB1-X90F_S000426_170508:user/release-keys; this device has Lenovo/yeti_10_row
E:Error in @/cache/recovery/block.map
(Status 7)
Installation aborted.
I foolishly after some googling and not finding enough info opened a chat with Lenovo. The rep asked what the error was and once I showed it said that was just related to my fingerprint scanner .... really?!?!? I knew the chat was a dead spot at this point but tried to state this device has no fingerprint reader, etc.. and so on. Hope they could really tell me what the error was. Anyway the rep told me to 'ignore' the update and just carry on since my device is actually working. They then went on to state they are hardware only on the chat session, which the Lenovo site says nothing about that. They then also told me to take this up with Google as they make Android not Lenovo. So much for warranty helping anything but possibly replacing a physically broken device. Their techs are useless, seriously.
So anywho, as you see in the error the update is trying to apply but looks for "Lenovo/yeti_10_row_wifi" and is finding somewhere (in the update or my device?) "Lenovo/yeti_10_row", notice the missing "wifi" on the end of that. My 'build.prop' and other system files are untouched. I even tried resetting the device. Which after the reset I was able to once again install the "YB1-X90L_170420" update but this next update "YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90F_USR_S000426_1705080316_WW06_BP_ROW" fails again on that same fingerprint mismatch.
Any clue what I should be looking for here? Has anyone else installed that update successfully?
Will anyone here supply me with the original (or as close as original) clean stock ROM without paying for it? I know I should have backed up with TWRP before I started doing updates, and this may well be my issue, but I didn't and not I can only restore back to an already rooted backup. Though I assume doing a reset of that rooted restore is considered clean (no root or 3rd party anything)?
thanks for any help or ideas!
Click to expand...
Click to collapse
From what i recall the fingerprint is what is shown in the buildprop. You could try editing this but i would tread carefully if its just a minor update as it may justmess up your system if there are other mismatches during the update process.
Lenovo technical support is a complete joke, you get much better help here. Lol
Sent from my F5121 using Tapatalk
Nope every line of my build.prop, where listed, has the proper "Lenovo/yeti_10_row_wifi" that the update claims is wrong. I personally think it is this update itself but no confirmation from other users if the update
"YB1-X90F_USR_S000408_1704201342_WW06_BP_ROW_TO_YB1_X90 F_USR_S000426_1705080316_WW06_BP_ROW"
has installed for them yet.
And I certainly knew how far I was *not* going to get with Lenovo but figured it couldn't hurt. I was really trying to get a stock ROM download from them or anywhere. I would love to just revert this to how it was out of the box and start over.
Well for reference I think I finally realize what is causing this (unconfirmed, but sounds feasible).
I did at one time try the "YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW" noted in another thread here from Easy firmware. I figured since it was a free download and others have done it, what could it hurt? lol (I think I know now). Anyway I forget what it was at the time but something with that rom just wasn't right for me and I decided to restore back to my TWRP backup I had made. I'm assuming my backup doesn't overwrite something that "L" version rom did and leaves some residue that reports itself as the "L" model now?
Anyway that is the only thing to me that makes sense to me that could be happening. Of course I have no original stock rom with IMG files to flash again to fix this. :/
Can anyone here confirm Easy Firmware is safe to use? Can anyone confirm their YB1-X90F rom is really that models rom?
MarkAllen said:
Well for reference I think I finally realize what is causing this (unconfirmed, but sounds feasible).
I did at one time try the "YB1-X90L_USR_S000155_1609272258_WW06_BP_ROW" noted in another thread here from Easy firmware. I figured since it was a free download and others have done it, what could it hurt? lol (I think I know now). Anyway I forget what it was at the time but something with that rom just wasn't right for me and I decided to restore back to my TWRP backup I had made. I'm assuming my backup doesn't overwrite something that "L" version rom did and leaves some residue that reports itself as the "L" model now?
Anyway that is the only thing to me that makes sense to me that could be happening. Of course I have no original stock rom with IMG files to flash again to fix this. :/
Can anyone here confirm Easy Firmware is safe to use? Can anyone confirm their YB1-X90F rom is really that models rom?
Click to expand...
Click to collapse
Hi,
I registered for the free account. Had to email there support team to get it activate as there were problems their end. The 90F firmwares were not in the free tier so I paid the $15 through paypal to be safe, and got the 90F firmware fine. It was old and I had to run a lot of updates to get it up to date. But it got everything back to how it should be.
I blame Lenovo that we have to jump through theese hoops, but the files are legit.
Broomfundel said:
Hi,
I registered for the free account. Had to email there support team to get it activate as there were problems their end. The 90F firmwares were not in the free tier so I paid the $15 through paypal to be safe, and got the 90F firmware fine. It was old and I had to run a lot of updates to get it up to date. But it got everything back to how it should be.
I blame Lenovo that we have to jump through theese hoops, but the files are legit.
Click to expand...
Click to collapse
Thanks for that confirmation! I did end up getting a registered account ($15) used Paypal and all looked good. I ended up downloading two versions of firmware. Initially I thought I would start with the oldest knowing many updates awaited but really wanted to be sure in erasing all my previous steps just in case it didn't work or the same thing happened again.
Used "YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip" from Easy Firmware. I opted to follow the included "installer.cmd" but did not do the "unlock" or "lock" as I already was unlocked of course and did not want to lock it again. When it completed I first noted my Halo keyboard not working and things were in Chinese here and there. This post resolved both items (thanks vimalbhimani!). Pretty sure that was because I formatted all the various partitions including "country", duh. Sadly however this version was showing no further OTA updates were available at all. Maybe Lenovo has deleted some of the really old OTA downloads and they are no longer available? Not sure.
I then installed the most recent rom "YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip". This time I did not format and only flashed this newer roms boot, bootloader, factory, recovery, and system images. After the system was backup everything was in great shape and updates were available. I made a TWRP backup straight away. Then I let the first and second updates listed below download and install via OTA and had no issues. The final two I opted to save time and installed using the standard recovery from my SD card after I downloaded them from my PC. Here are direct links to those if anyone wants them and they are in order of install (descending) based on already having "YB1-X90F_USR_S000196_161104"
http://tabdl.ota.lenovomm.com/dls/v...S000239_1612091428_WW06_BP_ROW_WCAC703BC6.zip
http://tabdl.ota.lenovomm.com/dls/v...S000340_1702251540_WW06_BP_ROW_WC365253B3.zip
http://tabdl.ota.lenovomm.com/dls/v6/YB1-X90F_170420_WC76FD00EF.zip
http://tabdl.ota.lenovomm.com/dls/v...S000426_1705080316_WW06_BP_ROW_WC80C2A0F2.zip (this is the failed update that incited this thread)
All updates went great and all is well at this point. Made another TWRP backup and I plan to root again now and see if any upcoming updates later have some issue?
I just wanted to report back here if anyone was interested that I unrooted, updated the June OTA update, and was able to root again without issue.
i got the same error message and now i'm stuck. I cant install any updates and so i bought a account from easy-firmware to get the firmware ... the firmware: YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip
doesnt not work with twrp or the stock recovery... it tells me "zip file is corupt"
@MarkAllen: Can you provide a guide how you got back to the stock rom? just flashing the zips doesnt work....
i really need help...
FreddeHamm said:
i got the same error message and now i'm stuck. I cant install any updates and so i bought a account from easy-firmware to get the firmware ... the firmware: YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip
doesnt not work with twrp or the stock recovery... it tells me "zip file is corupt"
@MarkAllen: Can you provide a guide how you got back to the stock rom? just flashing the zips doesnt work....
i really need help...
Click to expand...
Click to collapse
You cannot flash the ZIP file with TWRP or stock recovery. You have to unzip the file and then flash each IMG file that you need manually while in fastboot mode (there are seven of them).
**** IF YOU FOLLOW THESE DIRECTIONS IT IS NO ONES FAULT BUT YOUR OWN IF IT SCREWS UP SOMETHING!!! ****
**** WILL TRY TO HELP PROVIDE INFO IF I CAN BUT CANNOT GUARANTEE ANYTHING. ALSO THIS ERASE ALL YOUR DATA ****
First be aware as noted in the previous post above that I tried using "YB1-X90F_USR_S000036_1607280616_WW6_BP_ROW-flashfiles.zip" intially and it worked fine to get me back up and running but once I was done no new OTA updates were showing at all. No clue why so I ended up doing it again but used the ROM named "YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip". Also note I had erased my "country" partition and flashed "country.img" which requires the info posted by vimalbhimani again linked above in my previous post. It has to be used to correct for your country, no biggie at all and worked fine for myself.
1) Unzip the ROM you downloaded to a folder on your PC
2) From command prompt go to that folder
3) Make sure from the command prompt that ADB and fastboot commands are working properly
4) Put your tablet in fastboot mode ("adb reboot bootloader")
(these next commands are directly from the "install.cmd" included with the ROM from EasyFW, I just opted to run them manually one at a time in order and I omitted the unlock and lock commands)
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot continue
That's it. Minus the Intel error code 03 for being unlocked, it should be a normal out of the box setup when it boots back up into Android.
good luck!
People that are looking for the YB1-X90F_USR_S000196_1611040312_WW06_BP_ROW-flashfiles.zip may want to take a look at this post.
In contrast to my experiences with devices made by other OEMs, it seems like the files can directly be used for downgrading the Yoga Book if you're currently using a newer version.
Moved...
I'll put the long story below..but spare those that don't want to read. The short is, I'm not able to ADB Sideload the OTA images as it always fails to verifiy signature at about 40-47%. I've searched many places and not found a fix. So I'm hoping the genuises here at XDA which I frequent can help.
The long story. I've flashed roms for many years. My current device was the Nexus 6p. Running XE Rom I think it was. Flashed an update all was well, but my sim card would not show up. I was on MetroPCS and remembered needing a different radio. Flashed that,still no sim. Decided I'd go back to Stock since those had been updated to 8 by now. Flashed the OTA and followed some steps by another thread on XDA, one of the last was locking the bootloader. I had not booted up so I didn't know if my system was working. My big mistake! I locked my bootloader and don't have a system to boot into so I can enable OEM Unlocking. So now I only have adb sideload, can't flash individual images through fastboot! I think it can be recovered but for some reason the signature verification issue keeps coming up no matter what cable or PC I use.
If anyone has any thoughts I'd love to hear them. I have since moved to a Hauwei Mate SE and am pretty pleased but will not be a flashing phone I don't think. I loved my 6p and it still had lot's of life for me. I hate to sell it for parts at this point.... Thanks for anyone willing to chime in.
tcoursey said:
I'll put the long story below..but spare those that don't want to read. The short is, I'm not able to ADB Sideload the OTA images as it always fails to verifiy signature at about 40-47%. I've searched many places and not found a fix. So I'm hoping the genuises here at XDA which I frequent can help.
The long story. I've flashed roms for many years. My current device was the Nexus 6p. Running XE Rom I think it was. Flashed an update all was well, but my sim card would not show up. I was on MetroPCS and remembered needing a different radio. Flashed that,still no sim. Decided I'd go back to Stock since those had been updated to 8 by now. Flashed the OTA and followed some steps by another thread on XDA, one of the last was locking the bootloader. I had not booted up so I didn't know if my system was working. My big mistake! I locked my bootloader and don't have a system to boot into so I can enable OEM Unlocking. So now I only have adb sideload, can't flash individual images through fastboot! I think it can be recovered but for some reason the signature verification issue keeps coming up no matter what cable or PC I use.
If anyone has any thoughts I'd love to hear them. I have since moved to a Hauwei Mate SE and am pretty pleased but will not be a flashing phone I don't think. I loved my 6p and it still had lot's of life for me. I hate to sell it for parts at this point.... Thanks for anyone willing to chime in.
Click to expand...
Click to collapse
First, if i understand right you tried to flash OTA over custom rom to return to stock?? To go to stock you must flash full system image, not OTA.
And second, why the hell did you lock the bootloader??...you dont lock the BL unless you are 100% stock..
I know i didnt help you much, but if your BL is locked, dont know how to help...maybe someone else know how to unlock it again
Meanwhile read this guide,it will help you to understand some things:
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
scrin378 said:
First, if i understand right you tried to flash OTA over custom rom to return to stock?? To go to stock you must flash full system image, not OTA.
And second, why the hell did you lock the bootloader??...you dont lock the BL unless you are 100% stock..
I know i didnt help you much, but if your BL is locked, dont know how to help...maybe someone else know how to unlock it again
Meanwhile read this guide,it will help you to understand some things:
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Oh believe me my head hit the wall for sure! I got careless and wasn't thinking straight. No reason to lock the boot loader except it was on a list of steps to get back to stock..and I guess it was late! doh.
There are lot's of posts/videos I've seen that should allow what I'm trying to do with sideload adb but mine keeps getting a signature verification error. Each new full version of a release 7.0 8.0 etc..has the entire rom, images etc. So your suppose to be able to flash those even though they are OTA updates... *shrug*
It's a blur what I did exactly in some areas. I at one point may have tried to flash the set of Stock IMG files as well. But for sure now all I'm left with is a locked phone with who knows what on it! Stock recovery...some form of 7.0.0 that has NYC as letters...that I can find NOWHERE! on any official releases...
Prob trash, I really want that night back..lol.
Problem is in the title. Here are the Cliff's Notes:
1) got Moto E4 from Textnow
2) fastboot boot TWRP.img (cant recall which image I used but pretty sure it was proper. if this makes a difference I can dig out the TWRP I used and attach it, but I really cannot recall which one it was. Pretty sure I got it from xda though, not the official TWRP page)
3) took TWRP backup of bone-stock device.
4) unlock bootloader at Motorola.com
5) check out the custom roms and found out about the LTE problem. Seanstars fix didnt work for me on several roms, but in his defense I may have done something wrong. I didnt want to mess with it anymore and decided to go back to stock.
6) I found out that I lost my bone-stock-TWRP backup through my own idiocy. I honestly have no idea how I got back to stock but I managed it. Seems to be awful hard to get a stock rom to work with. I must not be looking hard enough but it seems like all the links for Perry stock roms here are dead.
Now to the problem.... after all that I cant get OTA updates. I get notifications, the update downloads,, but no joy.
Device does *not* restart after the update downloads.
Manual restart begins the update process, but then I get the Android on the Operating Table screen. I relocked the bootloader thinking that might be the issue, but now I fear that there is some sort of signature verification issue that is stopping the update.
Trying to give relevant info from the bootloader:
Baseband: M8920_15000.280.06.58.02R PERRY_NA_CA_CUST
Product/Variant: perry XT1766 16GB P3B
I really dont know where to go from here though. Any help is appreciated, thanks in advance.
knoober said:
Problem is in the title. Here are the Cliff's Notes:
1) got Moto E4 from Textnow
2) fastboot boot TWRP.img (cant recall which image I used but pretty sure it was proper. if this makes a difference I can dig out the TWRP I used and attach it, but I really cannot recall which one it was. Pretty sure I got it from xda though, not the official TWRP page)
3) took TWRP backup of bone-stock device.
4) unlock bootloader at Motorola.com
5) check out the custom roms and found out about the LTE problem. Seanstars fix didnt work for me on several roms, but in his defense I may have done something wrong. I didnt want to mess with it anymore and decided to go back to stock.
6) I found out that I lost my bone-stock-TWRP backup through my own idiocy. I honestly have no idea how I got back to stock but I managed it. Seems to be awful hard to get a stock rom to work with. I must not be looking hard enough but it seems like all the links for Perry stock roms here are dead.
Now to the problem.... after all that I cant get OTA updates. I get notifications, the update downloads,, but no joy.
Device does *not* restart after the update downloads.
Manual restart begins the update process, but then I get the Android on the Operating Table screen. I relocked the bootloader thinking that might be the issue, but now I fear that there is some sort of signature verification issue that is stopping the update.
Trying to give relevant info from the bootloader:
Baseband: M8920_15000.280.06.58.02R PERRY_NA_CA_CUST
Product/Variant: perry XT1766 16GB P3B
I really dont know where to go from here though. Any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
A number of partitions need to be pure stock for OTAs to work on Moto devices - including many that are not normally mounted. Likely one or more was altered by previous tinkering. Obviously system (never mounted r/w) and recovery; data must not have had dm-verity disabled. Etc, etc.