X720 - bootloop & TWRP broken - LeEco Le Pro3 Questions & Answers

Hey all, It's a sad day.
I'm 90% sure my x720 is dead. But this is my last resort. Yesterday I flashed the EUI6.0.030s Clean Mod by CrisBalGreece, it worked beautifully for 20~ hours. When I was scrolling through photos my phone froze, so naturally my first instinct was to force-restart it. Then the bootloops started. Naturally my first instinct is to go and try to enter TWRP, and that failed. Horribly. Here's the outcome
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not good. So next, I got up and attempted to reflash the latest version of TWRP. No dice, same results. Maybe its a Recovery partition issue? Nope. Flashed the boot partition too and it failed. Well at this point I pretty much have no other options except to try the QFIL Unbrick your Pro3 thread. Following it almost step by step, nothing has worked. Towards the end of the guide it gets a little bit confusing, because my device powers immediately back on with no waiting 30+ seconds for my device to turn back on. It seems like no changes were made to the device.
Am I missing something? I'd hate to lose this phone! Please help!

Bro, did you find a solution for this? i have the same problem ;/

gozef14 said:
Bro, did you find a solution for this? i have the same problem ;/
Click to expand...
Click to collapse
* actualizando la información ...
al poner el comando " fastboot erase ", todos muestran la misma respuesta borrando 'x nombre de la partición' ... OK,
pero estas particiones muestran la siguiente información cuando se intenta formatear; " formato: ext4 'xnombre de la partición '"
formato fastboot: datos ext4
enviando 'datos' (0 KB) ...
FAILED ()
formato fastboot: ext4 usrdata
enviando 'usrdata' (0 KB) ...
FAILED ()
formato fastboot : almacenamiento en ext4
enviando 'almacenamiento' (0 KB) ...
FAILED ()
formato fastboot: ext4 recuperación
enviando 'recuperación' (0 KB) ...
FAILED ()
fastboot formato: arranque ext4
enviando 'arranque'
fastboot format: ext4 misc
enviando 'misc' (0 KB) ...
FAILED ()
creo que estas particiones están dañadas o perdidas y se requiere el formato específico para este tipo de partición como (ext2, ext3, btrfs)
las particiones "userdata , sistema, caché "muestra información similar a esta ...
fastboot formato: ext4 userdata
Creación de un sistema de archivos con parámetros:
Tamaño: 53844041728
Tamaño del bloque: 4096
Bloques por grupo: 32768
Inodos por grupo: 8176
Tamaño del inodo: 256
Bloques de diario: 32768
Etiqueta:
Bloques: 13145518
Grupos de bloques: 402
Tamaño de grupo de bloques reservados: 1024
Sistema de archivos creado con 11/3286752 inodos y 252374/13145518 bloques
el objetivo informó un tamaño de descarga máximo de 536870912 bytes
borrando 'userdata' ...
OKAY [0.055s]
enviando 'userdata' (140709 KB) ...
OKAY [3.307s]
escribiendo 'userdata' ...
OKAY [1.187s]
finalizado. tiempo total: 4.556s
PS C: \ adb> fastboot format: ext3 userdata
Advertencia: el tipo de datos de usuario es ext4, pero se solicitó la extensión ext3.
El formato no es compatible con el sistema de archivos con el tipo 'ext3'.
borrando 'userdata' ...
OKAY [0.058s]
finalizado. tiempo total: 0.060s
la partición no cambia el tipo de formato y permanece en ext4, pero lo interesante es que las particiones tienen un formato válido.
algun comentario? Obviamente, la recuperación y el arranque no se inician porque el espacio designado para estas particiones no tiene nombre ni formato. lo siento mi ingles no es tan bueno

Related

Redesigning the One M7

ENGLISH:
Hello!
Since I bought my M7 almost 3 years now, I've been in love with his fabulous design. But it has always been something that has not liked to me, and it's that white band that divides the front and rear of the phone. I've been thinking of change it's battery, and I thought that step might as well buy a new metal casing and glass screen and design them to my liking. What I like to do is the following:
- In the glass display, remove the white color of the back and home buttons, so that only the HTC logo is seen but buttons keep running and brightening.
- Paint the white band to make it a brushed metal finish, similar to the bands that were in the Samsung Galaxy S3 and S4.
- Painting of black the white bands that divide the rear of the housing, including white ring around the camera.
Before buying the casing and screen, I wonder if I can do all this without any problems or if something can't be done. If finally it's possible, I would like to know what materials should I buy to do this.
Thank you very much!
SPANISH:
¡Hola!
Desde que compré mi M7 hace ya casi 3 años, he estado enamorado de su fabuloso diseño. Pero siempre ha tenido algo que no me ha gustado mucho, y es esa banda blanca que divide la parte delantera y la trasera. Llevo un tiempo pensando en cambiar la batería del móvil, y he pensado que de paso podría también comprar una carcasa metálica nueva y el cristal de la pantalla y diseñarlos a mi gusto. Lo que me gustaría hacer es lo siguiente:
- En el cristal de la pantalla, eliminar el color blanco de los botones atrás y home, de forma que sólo se vea el logo de HTC, pero sigan funcionando e iluminándose.
- Pintar la banda blanca para que quede con un acabado de metal pulido, similar al de las bandas que había en los Samsung Galaxy S3 y S4.
- Pintar de negro las bandas divisorias de la parte trasera de la carcasa, incluyendo el aro blanco que rodea la cámara.
Antes de comprar la carcasa y la pantalla, me gustaría saber si es posible realizar todo esto sin ningún problema o si hay algo que no pueda llevarse a cabo. Si finalmente es posible, me gustaría saber qué materiales debo comprar para poder hacer todo esto.
¡Muchas gracias!
Redesign
Hey, I am no Pro or someting so what I write is just my opinion.
1. removing white color at capacitive buttons. I think that would take to buy new digitizer and remove white "foil" or color on the digitizer buttons as seen on this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. by white band you mean centre of the phone? If yes, since that it is part of the back case only some metal foil would help, but I think that would fall off quickly so with combination with some think sillicon case
3. Camera ring can be replaced easily, form another housing. For the line above the camera I think that is not possible. Or there was a post where a guy sanded back of his phone and it was a bit darker, so maybe sand the strip a little bit and paint it then.
link to the thread: http://forum.xda-developers.com/showthread.php?t=2695008
Or to solve step 2. and 3. buy new back case (there are a lot of back cases on ebay, amazon or other shops)
As I said on the top I am no pro this is only my opinion on this . Hope it helps

Oficial Lineage Os 14.1 para Moto G Peregrine

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PHP:
#include <std_disclaimer.h>
Todos los derechos reservados
* Su garantía se va a perder entonces es su responsabilidad.
*
* No soy responsable de los dispositivos brickeados, tarjetas SD muertas,
* Guerra termonuclear, o te dispararon porque la aplicación de Telefono fallo. Por favor
* Hacer algunas investigaciones si tiene alguna preocupación acerca de las características incluidas en esta ROM
* Antes de aplicar! USTED está eligiendo hacer estas modificaciones, y si
* Me apuntas con el dedo por desordenar tu dispositivo, me reiré de ti.
* /
Mas informacion Lineage Os
Ustedes ya saben de que va esta rom antes llamada Cyanogenmod ahora se llamada diferente solo eso
Android nativo
Lo mismo de siempre pero mejorado
Caracteristicas
1 - Esto es Android 7.1.1
2 - El backupscript.sh de CM en la recuperación ignorará y eliminará las aplicaciones incompatibles de la partición del sistema (estas son normalmente aplicaciones no CM que los usuarios han optado por instalar). Debe instalar una aplicación compatible (o un paquete de aplicaciones) para recuperar esa funcionalidad
3 - Usted puede destellar CM14.1 nightlies directamente de CM13 snapshot o CM 13 nightlies (no hay necesidad de limpiar, pero para obtener resultados óptimos, siga mejor procedimiento de actualización limpia explicada a continuación.), Siempre que lea y siguia los elementos 1 y 2
Cuidado.
4- Una vez en CM14 nightlies, no se puede bajar de nuevo a CM13 - si usted está pensando en sólo explorar el lanzamiento, a continuación, tomar una copia de seguridad de su instalación existente si desea volver a ella.
5- Necesitará un Recovery compatible con N, es decir, TWRP 3.0.2-1
Instrucciones.
1 - Descargar Zip de la Rom
2 - Descargar GApps
3 - Apagar Celular e iniciar Recovery
4 - Hacer Todos los Wipes correspondientes (Limpieza Total)
5 - Flashear Zip de la Rom y GApps.
6 - Reiniciar Sistema
7 - Disfrutar
Descargas
Servidor de descargas: https://download.lineageos.org/peregrine
Google Apps GApps: http://opengapps.org/
Gracias a todos
XDAevDB Informacion
Lineage Os 14.1 para Peregrine, ROM for the Moto G 4G
Contributors
Shal, Luk 1337, Google, CyanogenMod Team, Motorola , Lineage Os Dev
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Reqerido: CyanogenMod 13 O 14.1
Basado en: CyanogenMod
Informacion de la version
Estado: Beta "Testeando"
Please read the Forum Rules and note Rule 4 in particular:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Thread closed - we can re-open if you provide a FULL English translation.

help with update

can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011
I want to know the same thing!
Me too. The firmware is ok but I'm not able to control the speaker balance and fader
mhnordin said:
Me too. The firmware is ok but I'm not able to control the speaker balance and fader
Click to expand...
Click to collapse
I have the same problem.
How did you do it?
Hello,
Just buy the same unit and mine is:
Model : CVD1810_WJ
Android : 8.1.0
Version du noyau: 3.18.79+
APP:ZXDZ_2020.03.18.10
MCU: CVD1810-WJ_20.04.15_309
Is there a newest ?
Also, how can you add your own boot logo with "Dedicated Logo Settings" options in settings (code 000000). It always says "import logo files first" but I did not know how to.....
Panos92corfu said:
can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011
Click to expand...
Click to collapse
same but my is android 10.1 but my build # is :ZXDZ_2020.08.12.18
Good day ,
Model : CVD1810_WJ_20.04.15_309
Android : 10.1.0
Build # ZXDZ_2020.05.25.20_1100
MCU: CVD1810-WJ_20.04.15_309
my question is how can i change the colors from the side panel.
thanks a lot guys!!
hello, I can't find the fader on this radio either. Does somebody has any idea? is there a patch?
hallo, ich kann bei diesen radio auch den Fader nicht finden. hat jemand eine Idee? gibt es einen Patch?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The update_ty.zip has been patched by the Magisk
Copy files to USB Flash Drive root directory
The patch has not been verified and is used at your own risk
Sorry, I don't have CVD1810. If something goes wrong, there's nothing I can do
Hello, I'm new to the field,
The other day I upgraded (I don't know what was in my head) to the android device on the car, since then the controls on the steering wheel don't work anymore, I mean vol +, vol-, phone commands, song / station selection ...
I mention that it is an android system is mounted on a NISSAN JUKE from 2010, all the controls on the steering wheel worked before CAN Upgrade.
I mention that it is an android system is mounted on a NISSAN JUKE from 2010, all the controls on the steering wheel worked before CAN Upgrade.
What can I do to activate the controls on the steering wheel.
Android: 10.1.0
Platform system: AC8227L
Can info: CVD1810_WJ
Image number: ZXDZ_2020.05.25.20_1100
Mcu version: UNKNOWN
Excuse me if I wrote where it should be.
Panos92corfu said:
can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011
Click to expand...
Click to collapse
Did you find the orginal or upgraded firmware for this? Please share
localos said:
The update_ty.zip has been patched by the Magisk
Copy files to USB Flash Drive root directory
The patch has not been verified and is used at your own risk
Sorry, I don't have CVD1810. If something goes wrong, there's nothing I can do
Click to expand...
Click to collapse
Do you know if anyone used this and worked properly for my model
firmware zxdz_2019.18.15
mcu version cvd1810_wj_19.08.02_011
Versace_69 said:
Hello,
Just buy the same unit and mine is:
Model : CVD1810_WJ
Android : 8.1.0
Version du noyau: 3.18.79+
APP:ZXDZ_2020.03.18.10
MCU: CVD1810-WJ_20.04.15_309
Is there a newest ?
Also, how can you add your own boot logo with "Dedicated Logo Settings" options in settings (code 000000). It always says "import logo files first" but I did not know how to.....
Click to expand...
Click to collapse
I had the same problem but found a workable solution. You must go to the android configuration, there you will look for the phone information menu, in the manual update section there is a menu where you can install the startup logo, it also helps you to install the update patch, but I have not done it. once you enter there you must have inserted a usb memory with the logo that you want to leave at the beginning, make sure that the dimensions are adequate for your screen. I leave you the one that I have installed, in case it helps you, specifically it must have the name zxdzlogo.png otherwise it will not help you.
tenía el mismo problema pero encontré una solución viable. debes ir a la configuración de android, ahí buscaras el menú información del telefono, en la sección actualización manual viene un menú donde puedes instalar el logo de inicio, también te sirve para instalar el patch de actualización, pero yo no lo he realizado. una vez que entres ahí deberás tener insertada una memoria usb con el logotipo que deseas dejar en el inicio, asegurate que las dimensiones sean adecuadas para tu pantalla. te dejo el que he instalado, por si te es de ayuda, específicamente debe tener el nombre zxdzlogo.png de lo contrario no te sevirá.
nilyuz said:
tenía el mismo problema pero encontré una solución viable. debes ir a la configuración de android, ahí buscaras el menú información del telefono, en la sección actualización manual viene un menú donde puedes instalar el logo de inicio, también te sirve para instalar el patch de actualización, pero yo no lo he realizado. una vez que entres ahí deberás tener insertada una memoria usb con el logotipo que deseas dejar en el inicio, asegurate que las dimensiones sean adecuadas para tu pantalla. te dejo el que he instalado, por si te es de ayuda, específicamente debe tener el nombre zxdzlogo.png de lo contrario no te sevirá.
Click to expand...
Click to collapse
I have an Essgoo brand radio, which has the same system version and has some problems, did you find the update for that system? Thank you
Tengo un radio de marca Essgoo, que tiene esa misma version de sistema y tiene algunos lios, encontraste la actulizacion apra ese sistema? gracias
Please if anyone has the firmware files for CVD1810_WJ SHARE THANKS.
Por favor, si alguien tiene los archivos de firmware para CVD1810_WJ COMPARTAN GRACIAS.
localos said:
El update_ty.zip ha sido parcheado por Magisk
Copie archivos al directorio raíz de la unidad flash USB
El parche no ha sido verificado y se usa bajo su propio riesgo
Lo siento, no tengo CVD1810. Si algo sale mal, no hay nada que pueda hacer
Click to expand...
Click to collapse
WHAT MODELS IS IT FOR?
PARA QUE MODELOS SIRVE?
Uploading new software only via flashtool.
New release fixed android 11 rds
ZXDZ_2022.06.18.11_2214 -working
How do I update, how do I upload this file? my radio has
Dear my best friend ,
I need your help to get the new software update . Because my buletooth is disconnected after 17 min.
please help me

8227l YT9213A brick when upgrade

Hi everyone, today I wanted to update my radio using the SP Flash Tool with instructions on this topic (https://forum.xda-developers.com/t/rom-firmware-brick-recovery-for-7-android-head-unit -ac8227l-yt9217-yt9218-1-16gb.3931863 /) I installed drivers, software, launched the program, pressed download and the computer did not detect my radio, I also tried on the other computer - it did not detect either, the radio settings were fine, other things apart from the computer it detected. I read about the connection of two pins on the radio motherboard, connected them, but it still has not been detected in the computer. The next step in this topic was: In file path select "user", in begin address put 0x0, In Region select the partition named "EMMC_USER". Hit Write memory. I couldn't find the "user" file so I chose "userdata" from the firmware folder, moved the cables and the computer detected it, uploaded the "userdata" file and since then the radio is black, but nothing is displayed. Connecting two jumpers does not work anymore, because I tried to connect them and accidentally touch some other jumper, something broke and after disconnecting the radio from the 12V power supply, and connecting 5V to the computer via USB, the radio lights up slightly, while wanting to connect the pendrive to the radio does not detect (does not light up), i.e. works in some other mode. Can it still be saved? Have I broken my radio? I am asking for quick help and advice, what jumpers should I connect, how to reverse it? I'm now without a radio, help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To repair a bricked radio, I should upload the files BOOT_1 and BOOT_2, but the radio does not respond to connecting to the computer, neither normally nor by touching two jumpers. What to do? Please help.
Fanciak said:
Para consertar um rádio travado, devo fazer o upload dos arquivos BOOT_1 e BOOT_2, mas o rádio não responde ao se conectar ao computador, nem normalmente nem tocando dois jumpers. O que fazer? Por favor ajude.
Click to expand...
Click to collapse
Estou tendo o mesmo problema, tentei várias roms e não inicia, antes que o logotipo do android aparecesse no bootloop depois de tentar restaurar da fábrica, então tentei reinstalar com algumas roms aqui via usb e agora é só uma tela preta. Alguém pode me ajudar?
Fanciak said:
Estou tendo o mesmo problema, tentei várias roms e não inicia, antes que o logotipo do android aparecesse no bootloop depois de tentar restaurar da fábrica, então tentei reinstalar com algumas roms aqui via usb e agora é só uma tela preta. Alguém pode me ajudar?
Fanciak said:
Olá a todos, hoje eu queria atualizar meu rádio usando a SP Flash Tool com instruções sobre este tópico ( https://forum.xda-developers.com/t/rom-firmware-brick-recovery-for-7-android-head -unidade-ac8227l-yt9217-yt9218-1-16gb.3931863 /) Instalei drivers, software, executei o programa, pressionei download e o computador não detectou meu rádio, também tentei no outro computador - ele também não detectou, o as configurações de rádio estavam boas, outras coisas além do computador detectado. Li sobre a conexão de dois pinos na placa-mãe do rádio, conectei-os, mas ainda não foi detectado no computador. A próxima etapa neste tópico foi: No caminho do arquivo selecione "usuário", no endereço inicial coloque 0x0, na Região selecione a partição chamada "EMMC_USER". Memória Hit Write. Não consegui encontrar o arquivo "user" então escolhi "userdata" da pasta de firmware, movi os cabos e o computador detectou, carreguei o arquivo "userdata" e desde então o rádio está preto, mas nada é mostrado. Conectar dois jumpers não funciona mais, pois tentei conectá-los e acidentalmente toque em algum outro jumper, algo quebrou e após desconectar o rádio da fonte de alimentação 12V e conectar 5V ao computador via USB, o rádio acende um pouco, enquanto querer conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me enquanto deseja conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me enquanto deseja conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me
View attachment 5275535
Click to expand...
Click to collapse
Poderia me ajudar a reviver o meu 2 din? black
Click to expand...
Click to collapse

[AJUDA] Multimídia YT9216CJ

Olá pessoal, tudo bem?
EU estou com 2 probleminhas na minha multimídia:
1) Atualizei ela pro Android 10 porém, ela não deixa eu instalar o WAZE de jeito nenhum! Nem pela GooglePlay nem por APK, nem em versões mais baixas. Tem alguma forma de fazer isso?
2) A versão da minha multimídia é 1GB RAM e 16GB ROM. Tem como atualizar para Android 11, 12 ou 13 nessa multimídia??
Talvez o WAZE não instale por conta de ser na versão 10?
Obrigado pela ajuda!
Se tiverem links da uma versão do Android para essa multimídia, ou do WAZE que funcione nela, eu agradeço demais! ")
Mod translation:
Hello everyone, everything good?
I have 2 problems with my multimedia:
1) I updated it to Android 10 but it won't let me install WAZE at all! Neither through GooglePlay nor APK, nor in lower versions. Is there any way to do this?
2) My multimedia version is 1GB RAM and 16GB ROM. Is there a way to update to Android 11, 12 or 13 in this multimedia??
Maybe WAZE doesn't install because it's version 10?
Thank you for your help!
If you have links to an Android version for this multimedia, or WAZE that works on it, I'd really appreciate it!
Fala brother, blz?
Tudo que é postado aqui no XDA deve ser postado em inglês, para os próximos posts faça isso para evitar problemas com a moderação, embora eles sejam bem de boa são as regras da comunidade.
Respondendo as suas perguntas:
1) Você atualizou por onde? Sua multimidia é do tipo XY AUTO? Se no menu de configurações do carro> sistema de informação, aparecer mais ou menos como a imagem abaixo, sua multimidia deve ser uma XY AUTO de fato.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) acredito que não seja problema com a versão da multimidia ser de 1GB de ram nem 16 de rom, mas sim algum problema com a imagem, sua multimidia não tem android auto/carplay?
Somente se a multimidia for uma xy auto, faça o download da atualização pelo link abaixo, salve em um pedrive formatado em fat32 sem outras partições ou outros arquivos dentro do pendrive, não extraia os arquivos, apenas mova o arquivo baixado para a raiz do pendrive, conecte na multimidia, vá em configurações do carro>sistema de informação>android upgrade, o processo iniciará, não remova o pendrive ou cancele até que o processo tenha sido concluído. Após isso se os problemas persistir, clique no botão de reset na sua multimídia.
usuário: xyauto
senha: 123456
Tela vertical:
Download.
Tela horizontal:
Download.
English Version:
Hey dude, what's up?
Everything posted here on XDA must be posted in English, for the next posts do this to avoid problems with moderation, although they are very good are the rules of the community.
Answering your questions:
1) Where did you update? Is your multimedia type XY AUTO? If in the car settings menu > information system, it appears more or less like the image, your multimedia must indeed be an XY AUTO.
2) I don't think it's a problem with the multimedia version having 1GB of ram or 16 of rom, but rather a problem with the image, doesn't your multimedia have android auto/carplay?
Only if the multimedia is an xy auto, download the update from the link below, save it on a fat32 formatted pendrive without other partitions or other files inside the pendrive, do not extract the files, just move the downloaded file to the root of the pendrive , connect to multimedia, go to car settings>information system>android upgrade, the process will start, do not remove the pendrive or cancel until the process has been completed. After that, if the problems persist, click the reset button on your multimedia.
user: xyauto
password: 123456
vertical screen:
Download.
horizontal screen:
Download.

Categories

Resources