Database Users

Redesigning the One M7

ENGLISH:
Hello!
Since I bought my M7 almost 3 years now, I've been in love with his fabulous design. But it has always been something that has not liked to me, and it's that white band that divides the front and rear of the phone. I've been thinking of change it's battery, and I thought that step might as well buy a new metal casing and glass screen and design them to my liking. What I like to do is the following:
- In the glass display, remove the white color of the back and home buttons, so that only the HTC logo is seen but buttons keep running and brightening.
- Paint the white band to make it a brushed metal finish, similar to the bands that were in the Samsung Galaxy S3 and S4.
- Painting of black the white bands that divide the rear of the housing, including white ring around the camera.
Before buying the casing and screen, I wonder if I can do all this without any problems or if something can't be done. If finally it's possible, I would like to know what materials should I buy to do this.
Thank you very much!
SPANISH:
¡Hola!
Desde que compré mi M7 hace ya casi 3 años, he estado enamorado de su fabuloso diseño. Pero siempre ha tenido algo que no me ha gustado mucho, y es esa banda blanca que divide la parte delantera y la trasera. Llevo un tiempo pensando en cambiar la batería del móvil, y he pensado que de paso podría también comprar una carcasa metálica nueva y el cristal de la pantalla y diseñarlos a mi gusto. Lo que me gustaría hacer es lo siguiente:
- En el cristal de la pantalla, eliminar el color blanco de los botones atrás y home, de forma que sólo se vea el logo de HTC, pero sigan funcionando e iluminándose.
- Pintar la banda blanca para que quede con un acabado de metal pulido, similar al de las bandas que había en los Samsung Galaxy S3 y S4.
- Pintar de negro las bandas divisorias de la parte trasera de la carcasa, incluyendo el aro blanco que rodea la cámara.
Antes de comprar la carcasa y la pantalla, me gustaría saber si es posible realizar todo esto sin ningún problema o si hay algo que no pueda llevarse a cabo. Si finalmente es posible, me gustaría saber qué materiales debo comprar para poder hacer todo esto.
¡Muchas gracias!

Redesign
Hey, I am no Pro or someting so what I write is just my opinion.
1. removing white color at capacitive buttons. I think that would take to buy new digitizer and remove white "foil" or color on the digitizer buttons as seen on this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. by white band you mean centre of the phone? If yes, since that it is part of the back case only some metal foil would help, but I think that would fall off quickly so with combination with some think sillicon case
3. Camera ring can be replaced easily, form another housing. For the line above the camera I think that is not possible. Or there was a post where a guy sanded back of his phone and it was a bit darker, so maybe sand the strip a little bit and paint it then.
link to the thread: http://forum.xda-developers.com/showthread.php?t=2695008
Or to solve step 2. and 3. buy new back case (there are a lot of back cases on ebay, amazon or other shops)
As I said on the top I am no pro this is only my opinion on this . Hope it helps

Oficial Lineage Os 14.1 para Moto G Peregrine

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PHP:
#include <std_disclaimer.h>
Todos los derechos reservados
* Su garantía se va a perder entonces es su responsabilidad.
*
* No soy responsable de los dispositivos brickeados, tarjetas SD muertas,
* Guerra termonuclear, o te dispararon porque la aplicación de Telefono fallo. Por favor
* Hacer algunas investigaciones si tiene alguna preocupación acerca de las características incluidas en esta ROM
* Antes de aplicar! USTED está eligiendo hacer estas modificaciones, y si
* Me apuntas con el dedo por desordenar tu dispositivo, me reiré de ti.
* /
Mas informacion Lineage Os
Ustedes ya saben de que va esta rom antes llamada Cyanogenmod ahora se llamada diferente solo eso
Android nativo
Lo mismo de siempre pero mejorado
Caracteristicas
1 - Esto es Android 7.1.1
2 - El backupscript.sh de CM en la recuperación ignorará y eliminará las aplicaciones incompatibles de la partición del sistema (estas son normalmente aplicaciones no CM que los usuarios han optado por instalar). Debe instalar una aplicación compatible (o un paquete de aplicaciones) para recuperar esa funcionalidad
3 - Usted puede destellar CM14.1 nightlies directamente de CM13 snapshot o CM 13 nightlies (no hay necesidad de limpiar, pero para obtener resultados óptimos, siga mejor procedimiento de actualización limpia explicada a continuación.), Siempre que lea y siguia los elementos 1 y 2
Cuidado.
4- Una vez en CM14 nightlies, no se puede bajar de nuevo a CM13 - si usted está pensando en sólo explorar el lanzamiento, a continuación, tomar una copia de seguridad de su instalación existente si desea volver a ella.
5- Necesitará un Recovery compatible con N, es decir, TWRP 3.0.2-1
Instrucciones.
1 - Descargar Zip de la Rom
2 - Descargar GApps
3 - Apagar Celular e iniciar Recovery
4 - Hacer Todos los Wipes correspondientes (Limpieza Total)
5 - Flashear Zip de la Rom y GApps.
6 - Reiniciar Sistema
7 - Disfrutar
Descargas
Servidor de descargas: https://download.lineageos.org/peregrine
Google Apps GApps: http://opengapps.org/
Gracias a todos
XDAevDB Informacion
Lineage Os 14.1 para Peregrine, ROM for the Moto G 4G
Contributors
Shal, Luk 1337, Google, CyanogenMod Team, Motorola , Lineage Os Dev
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
ROM Firmware Reqerido: CyanogenMod 13 O 14.1
Basado en: CyanogenMod
Informacion de la version
Estado: Beta "Testeando"

Please read the Forum Rules and note Rule 4 in particular:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Thread closed - we can re-open if you provide a FULL English translation.

help with update

can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011

I want to know the same thing!

Me too. The firmware is ok but I'm not able to control the speaker balance and fader

mhnordin said:
Me too. The firmware is ok but I'm not able to control the speaker balance and fader
Click to expand...
Click to collapse
I have the same problem.
How did you do it?

Hello,
Just buy the same unit and mine is:
Model : CVD1810_WJ
Android : 8.1.0
Version du noyau: 3.18.79+
APP:ZXDZ_2020.03.18.10
MCU: CVD1810-WJ_20.04.15_309
Is there a newest ?
Also, how can you add your own boot logo with "Dedicated Logo Settings" options in settings (code 000000). It always says "import logo files first" but I did not know how to.....

Panos92corfu said:
can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011
Click to expand...
Click to collapse
same but my is android 10.1 but my build # is :ZXDZ_2020.08.12.18

Good day ,
Model : CVD1810_WJ_20.04.15_309
Android : 10.1.0
Build # ZXDZ_2020.05.25.20_1100
MCU: CVD1810-WJ_20.04.15_309
my question is how can i change the colors from the side panel.
thanks a lot guys!!

hello, I can't find the fader on this radio either. Does somebody has any idea? is there a patch?
hallo, ich kann bei diesen radio auch den Fader nicht finden. hat jemand eine Idee? gibt es einen Patch?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The update_ty.zip has been patched by the Magisk
Copy files to USB Flash Drive root directory
The patch has not been verified and is used at your own risk
Sorry, I don't have CVD1810. If something goes wrong, there's nothing I can do

Hello, I'm new to the field,
The other day I upgraded (I don't know what was in my head) to the android device on the car, since then the controls on the steering wheel don't work anymore, I mean vol +, vol-, phone commands, song / station selection ...
I mention that it is an android system is mounted on a NISSAN JUKE from 2010, all the controls on the steering wheel worked before CAN Upgrade.
I mention that it is an android system is mounted on a NISSAN JUKE from 2010, all the controls on the steering wheel worked before CAN Upgrade.
What can I do to activate the controls on the steering wheel.
Android: 10.1.0
Platform system: AC8227L
Can info: CVD1810_WJ
Image number: ZXDZ_2020.05.25.20_1100
Mcu version: UNKNOWN
Excuse me if I wrote where it should be.

Panos92corfu said:
can someone help to find update for this headunit?
Its IMARS 7 inch buyed from banggood
model : CVD1810_WJ
android : 8.1.0
build number :ZXDZ_2019.09.18.15_1100
mcu version :CVD1810-WJ_19.08.02_011
Click to expand...
Click to collapse
Did you find the orginal or upgraded firmware for this? Please share

localos said:
The update_ty.zip has been patched by the Magisk
Copy files to USB Flash Drive root directory
The patch has not been verified and is used at your own risk
Sorry, I don't have CVD1810. If something goes wrong, there's nothing I can do
Click to expand...
Click to collapse
Do you know if anyone used this and worked properly for my model
firmware zxdz_2019.18.15
mcu version cvd1810_wj_19.08.02_011

Versace_69 said:
Hello,
Just buy the same unit and mine is:
Model : CVD1810_WJ
Android : 8.1.0
Version du noyau: 3.18.79+
APP:ZXDZ_2020.03.18.10
MCU: CVD1810-WJ_20.04.15_309
Is there a newest ?
Also, how can you add your own boot logo with "Dedicated Logo Settings" options in settings (code 000000). It always says "import logo files first" but I did not know how to.....
Click to expand...
Click to collapse
I had the same problem but found a workable solution. You must go to the android configuration, there you will look for the phone information menu, in the manual update section there is a menu where you can install the startup logo, it also helps you to install the update patch, but I have not done it. once you enter there you must have inserted a usb memory with the logo that you want to leave at the beginning, make sure that the dimensions are adequate for your screen. I leave you the one that I have installed, in case it helps you, specifically it must have the name zxdzlogo.png otherwise it will not help you.
tenía el mismo problema pero encontré una solución viable. debes ir a la configuración de android, ahí buscaras el menú información del telefono, en la sección actualización manual viene un menú donde puedes instalar el logo de inicio, también te sirve para instalar el patch de actualización, pero yo no lo he realizado. una vez que entres ahí deberás tener insertada una memoria usb con el logotipo que deseas dejar en el inicio, asegurate que las dimensiones sean adecuadas para tu pantalla. te dejo el que he instalado, por si te es de ayuda, específicamente debe tener el nombre zxdzlogo.png de lo contrario no te sevirá.

nilyuz said:
tenía el mismo problema pero encontré una solución viable. debes ir a la configuración de android, ahí buscaras el menú información del telefono, en la sección actualización manual viene un menú donde puedes instalar el logo de inicio, también te sirve para instalar el patch de actualización, pero yo no lo he realizado. una vez que entres ahí deberás tener insertada una memoria usb con el logotipo que deseas dejar en el inicio, asegurate que las dimensiones sean adecuadas para tu pantalla. te dejo el que he instalado, por si te es de ayuda, específicamente debe tener el nombre zxdzlogo.png de lo contrario no te sevirá.
Click to expand...
Click to collapse
I have an Essgoo brand radio, which has the same system version and has some problems, did you find the update for that system? Thank you
Tengo un radio de marca Essgoo, que tiene esa misma version de sistema y tiene algunos lios, encontraste la actulizacion apra ese sistema? gracias

Please if anyone has the firmware files for CVD1810_WJ SHARE THANKS.
Por favor, si alguien tiene los archivos de firmware para CVD1810_WJ COMPARTAN GRACIAS.

localos said:
El update_ty.zip ha sido parcheado por Magisk
Copie archivos al directorio raíz de la unidad flash USB
El parche no ha sido verificado y se usa bajo su propio riesgo
Lo siento, no tengo CVD1810. Si algo sale mal, no hay nada que pueda hacer
Click to expand...
Click to collapse
WHAT MODELS IS IT FOR?
PARA QUE MODELOS SIRVE?

Uploading new software only via flashtool.
New release fixed android 11 rds
ZXDZ_2022.06.18.11_2214 -working

How do I update, how do I upload this file? my radio has

Dear my best friend ,
I need your help to get the new software update . Because my buletooth is disconnected after 17 min.

please help me

8227l YT9213A brick when upgrade

Hi everyone, today I wanted to update my radio using the SP Flash Tool with instructions on this topic (https://forum.xda-developers.com/t/rom-firmware-brick-recovery-for-7-android-head-unit -ac8227l-yt9217-yt9218-1-16gb.3931863 /) I installed drivers, software, launched the program, pressed download and the computer did not detect my radio, I also tried on the other computer - it did not detect either, the radio settings were fine, other things apart from the computer it detected. I read about the connection of two pins on the radio motherboard, connected them, but it still has not been detected in the computer. The next step in this topic was: In file path select "user", in begin address put 0x0, In Region select the partition named "EMMC_USER". Hit Write memory. I couldn't find the "user" file so I chose "userdata" from the firmware folder, moved the cables and the computer detected it, uploaded the "userdata" file and since then the radio is black, but nothing is displayed. Connecting two jumpers does not work anymore, because I tried to connect them and accidentally touch some other jumper, something broke and after disconnecting the radio from the 12V power supply, and connecting 5V to the computer via USB, the radio lights up slightly, while wanting to connect the pendrive to the radio does not detect (does not light up), i.e. works in some other mode. Can it still be saved? Have I broken my radio? I am asking for quick help and advice, what jumpers should I connect, how to reverse it? I'm now without a radio, help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

To repair a bricked radio, I should upload the files BOOT_1 and BOOT_2, but the radio does not respond to connecting to the computer, neither normally nor by touching two jumpers. What to do? Please help.

Fanciak said:
Para consertar um rádio travado, devo fazer o upload dos arquivos BOOT_1 e BOOT_2, mas o rádio não responde ao se conectar ao computador, nem normalmente nem tocando dois jumpers. O que fazer? Por favor ajude.
Click to expand...
Click to collapse
Estou tendo o mesmo problema, tentei várias roms e não inicia, antes que o logotipo do android aparecesse no bootloop depois de tentar restaurar da fábrica, então tentei reinstalar com algumas roms aqui via usb e agora é só uma tela preta. Alguém pode me ajudar?

Fanciak said:
Estou tendo o mesmo problema, tentei várias roms e não inicia, antes que o logotipo do android aparecesse no bootloop depois de tentar restaurar da fábrica, então tentei reinstalar com algumas roms aqui via usb e agora é só uma tela preta. Alguém pode me ajudar?
Fanciak said:
Olá a todos, hoje eu queria atualizar meu rádio usando a SP Flash Tool com instruções sobre este tópico ( https://forum.xda-developers.com/t/rom-firmware-brick-recovery-for-7-android-head -unidade-ac8227l-yt9217-yt9218-1-16gb.3931863 /) Instalei drivers, software, executei o programa, pressionei download e o computador não detectou meu rádio, também tentei no outro computador - ele também não detectou, o as configurações de rádio estavam boas, outras coisas além do computador detectado. Li sobre a conexão de dois pinos na placa-mãe do rádio, conectei-os, mas ainda não foi detectado no computador. A próxima etapa neste tópico foi: No caminho do arquivo selecione "usuário", no endereço inicial coloque 0x0, na Região selecione a partição chamada "EMMC_USER". Memória Hit Write. Não consegui encontrar o arquivo "user" então escolhi "userdata" da pasta de firmware, movi os cabos e o computador detectou, carreguei o arquivo "userdata" e desde então o rádio está preto, mas nada é mostrado. Conectar dois jumpers não funciona mais, pois tentei conectá-los e acidentalmente toque em algum outro jumper, algo quebrou e após desconectar o rádio da fonte de alimentação 12V e conectar 5V ao computador via USB, o rádio acende um pouco, enquanto querer conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me enquanto deseja conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me enquanto deseja conectar o pendrive ao rádio não detecta (não acende), ou seja, funciona em algum outro modo. Ainda pode ser salvo? Quebrei meu rádio? Estou pedindo ajuda e conselhos rápidos, quais jumpers devo conectar, como reverter isso? Agora estou sem radio ajuda-me
View attachment 5275535
Click to expand...
Click to collapse
Poderia me ajudar a reviver o meu 2 din? black
Click to expand...
Click to collapse

Head unit Zxdz_2021 no equalizer for bluetooth music only on music app :(

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi!
I was wondering why my headunit does not have an equalizer for the bluetooth music but it has one on the music app. (Does not apply to bt music if I use it).
Attached image is the device info

SchruteGalactica said:
View attachment 5654085Hi!
I was wondering why my headunit does not have an equalizer for the bluetooth music but it has one on the music app. (Does not apply to bt music if I use it).
Attached image is the device info
Click to expand...
Click to collapse
yes the same as mine.
can anyone explain about this or do you have a solution, thanks.

Head unit Zxdz_2021 firmware​

Jack Sparoh said:
sim igual ao meu.
Alguém pode explicar sobre isso ou você tem uma solução, obrigado.
Click to expand...
Click to collapse
oi eu

Eu posso ajudar so que tambem preciso de uma ajuda. Pode fazer para mim um backup. E enviar-me. Para solucionar ese problema faza um backup do seu e coloque outro android pode ser o 11 ja traz um equalizador e o som e melhorado sistema de Bluetooth para o telefone e melhor que a porqueria que ese taz. Só posso ajudar melhor depois de ter o backup . De antemao obrigado
Mod translation: I can help but I also need some help. Can you make a backup for me. And send me. To solve this problem, make a backup of yours and put another android, maybe 11 already brings an equalizer and the sound is improved. Bluetooth system for the phone is better than the crap that it is. I can only help better after I have the backup. thank you in advance

carlos197200 said:
Eu posso ajudar so que tambem preciso de uma ajuda. Pode fazer para mim um backup. E envie-me. Para solucionar ese problema faza um backup do seu e coloque outro android pode ser o 11 ja traz um equalizador e som e melhorado sistema de bluetooth para o telefone e melhor que a porqueria que ese taz. Só posso ajudar melhor depois de ter o backup. De antemão obrigado
Click to expand...
Click to collapse
boa tarde Comprei meu multimidia usado, e tentei fazer uma atualização da firmaware e agroa o touch parou de funcionar, sabe como me ajudar Modelo Twincan
Plataforma: 8227L
Androide 11
Mod translation:
good afternoon I bought my multimedia used, and I tried to update the firmware and now the touch stopped working, do you know how to help me Model Twincan
Platform: 8227L
Android 11

RodrigoGonsalves said:
Mod translation:
good afternoon
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50