At start I rooted and Flash open kirins firmware on my p10 plus. After flashing stock rom again my oem toggle not working. And some of apps are missing. Phone is rebranded to some other country. I have checked manufacturer which is showing hw/meafnaf which is of north africa I guess. I'm from india . So any chances to revert back to stock. I cant execute fastboot command. Usb debugging is working fine. But Allow Oem unlock toggle under developer mode is not working. Tried everything removing google account etc and all. Any solutions ?
Related
I got the unlock code and everything. Installed drivers, got everything in place but when I use the command " fastboot oem unlock "key"
It fails and shows me a remote error along with this
Enable OEM unlock in dev option .
But I can't see that option in dev options and iam fed up with this. I tried searching Google but no luck. I checked the cid to see if it is unlockable and the string was endling with " 007 " means unlockable.
Iam running marshmello ota. All factory. No root nothing..
Any help would be really appreciated. I just want to install cyanogen
Bigbraveballs said:
I got the unlock code and everything. Installed drivers, got everything in place but when I use the command " fastboot oem unlock "key"
It fails and shows me a remote error along with this
Enable OEM unlock in dev option .
But I can't see that option in dev options and iam fed up with this. I tried searching Google but no luck. I checked the cid to see if it is unlockable and the string was endling with " 007 " means unlockable.
Iam running marshmello ota. All factory. No root nothing..
Any help would be really appreciated. I just want to install cyanogen
Click to expand...
Click to collapse
Take a look at this thread in Lenovo/Motorola forums (currently 74 pages long), it seems you're not the only one that has this issue (e.g. post #10 [last post in page 1], post #14 [4th post in page 2] and post #15).
Go to settings/apps/all/settings and clear data only , then go back to about phone/ build number 7 times ,enable developer options oem unlock may be present. Try this.
had the same issue
SOLVED
I was fiddeling with my moto X 2nd and stuck on the same issue.
Running a OTA 6.0 stock unbranded FW Moto X 2nd
Same problem, no OEM UNLOCK under Dev options.
then gave up on the phone and started playing around with fastboot mode and went into recovery to have a peek, and solved the issue.
detailed info for other googelers:
(VOL DOWN while pressing POWER, release POWER after a few seconds still holding VOL DOWN for a few more extra seconds takes you to FASTBOOT, from there select RECOVERY, and when the broken android appears, press POWER to get into RECOVERY)
Cleared my CACHE partition and after that made a FACTORY RESET under RECOVERY and then REBOOT
Restarted phone and did the initial setup, selected not to enable REMOTE PROTECTION (this might also be the reason the allow oem unlock button was enabled, as said, have no clue what made it work)
And Voila! the "allow oem unlock" button was there after enabeling DEVELOPER OPTIONS and I could enable it and unlock the bootloader.
maybe the formatting of cache partition did the trick since it was OTA updated, i have no clue, but it is now there.
this helped me clean kingroot
drmuruga said:
Go to settings/apps/all/settings and clear data only , then go back to about phone/ build number 7 times ,enable developer options oem unlock may be present. Try this.
Click to expand...
Click to collapse
I was messing with my pos alcatel pixi phone trying to root and unlock and installed kingroot, big mistake it was very hard to get rid of. I finally got it to uninstall but it left behind a com.kingroot. Doing this procedure enabled me to uninstall it when previously I was unable. THANKS
Hi! How to unlock OEM, if the phone does not turn on?
___
When the official firmware, the error "device has not DRK, to establish the first DRK"
I have the same problem. I can access android recovery but FRP lock is on and I can't boot to the OS to unlock OEM.
you need to use smart switch emergency to restore your phone to working condition using the rom meant for your device.
You will need to device model and serial number for this to work.
You do not need to worry about the drivers as this is a stand alone function.
Then activate the developer option.
Turn OEM unlock on.
Then try flashing the ROM or Custom ROM you want.
So I've been trying to install the TWRP on this device but the OEM Unlock kept on blocking it. the OEM unlock is "On". There's no option to turn it off in developer options because it is a Demo unit but it is an Exynos one. I've been searching on how, but the internet only shows the released variants not the demo unit... i want to change the phone to G950FD so that I can use it as a normal phone but without a sim.
Sorry but a long one so pls bear with me. I just flashed a S7 edge nougat stock rom via Odin by flashing just AP and have been using it for a day and have some apps installed and debugging enabled on it.if I flash an Oreo stock rom with Odin with BL . CP . HOME CSC and AP .(emphasis on HOME CSC)after it flashes .will it just boot to my lock screen with my pattern lock and USB debugging enabled just the way it was or will it take me to the setup wizard???I really need to know this as my S7 screen is busted and will only work with aod enabled or USB debugging enabled.which is why I want to know if this will preserve my aod and debugging setting or will it take me to the setup wizard.
Home_CSC does not tell the phone to do a factory reset while the non-Home CSC will do so.
For AOD and USB Debugging they will stay on. Enable OEM unlock will be probably set to disable because the option is hidden when you update to OREO for a week, then after a week you'll see the option and you can enable OEM unlocking again.
Thank you so much for that.so even if I'm changing android versions it won't make a difference right?thanks a lot
So, the thing is - in the morning I have locked my device's bootloader, I did not install anything or else, just in minimal adb fastboot typed "fastboot oem lock", because I needed my bl to be locked to run some apps properly. Little did I know, it was a global rom on a chinese phone, and it also locked my device from booting the system, because it landed in state "this miui version cannot be installed on this device". As many people may know, it made my xiaomi able to run only fastboot or recovery menu, it just cannot boot the system. For the last 6 hours straight I have been looking for any resonable solutions, doable on the spot, but all I can see is EDL. Before anyone asks - I have already tried MiFlash (it won't run because device is locked), also minimal adb fastboot gives error "token verify failed", so I know i have to use something to unlock my phones bootloader. Of course, there is another BUT - I did not turn on usb debugging and mi boot unlock in settings, so using Mi Unlock on pc with fastboot turned on gives result in "Please add your account in "MIUI's Settings > Developer optionss > Mi unlock status", which, as I said, I cannot do.
So we come to my question - is there any reasonable way to turn on this "Mi unlock status" and USB Debug without turning on whole system, or any other way to unlock bootloader/turn on it properly?
Greetings from Poland and thank you for your help
Which recovery do you have? Maybe you could try to restore system and data if it is twrp/fox.
If it's stock recovery give the mi assisant a try, never used it myself though, but worth a try.
Also look here https://c.mi.com/thread-2224746-1-0.html
and here https://c.mi.com/thread-2312140-1-0.html