Related
First of all, I may be posting this in the wrong section. But I desperately need your help on this.
I got a Jiayu S3, and couldn't not try to flash a custom rom on it, so I tried with "Pure AOSP V1 TF".
All went well, untill i found this app which was included with the rom, "Kinguser" (should be Superuser, i believe), which game me the option to toggle root.
At first and only time I opened this Kinguser app, option root was active. I did deactivate it, and reactivated immediately after.
As soon as i reactivated root, the privacy pin screen showed up.
I didn't set any PIN on my phone, so at first i thought it could be something like 1111 or 0000. Tried 5 times and it made me wait 30 seconds. Then tried another 3-4 times.
Here began the real mess: "forgot pin" (or psw) didn't show up, but at the time i didn't even know about that recovery option.
I didn't know what to do, so I just thought that a factory reset would certainly solve the problem, how couldn't it? Well, wiped everything, but PIN lock screen didn't go away.
So, wiping everything, I also deleted my gmail account from the phone, and I lost the possibility to lock phone and give it a new password (Android Device Manager). Too bad at the time I didn't know about this recovery option as well...
Now I'm out of ideas. I think I've tried every method I could find with a search of "Smartphone PIN locked". Tried with resets, plugins, deleting files with adb..
How do I unlock my phone?
little update: after a factory reset, for 2-3 seconds, it shows the default initial screen, but it doesn't last more that and i just can't do anything.
Now i managed to bring back the stock rom, but with that i lost the twrp recovery, and i can't find a way to make pc recognize the phone to reflash it.
It seems it's going worse instead of better...
I had just bought this Jiayu S3 and planned to bring it on holidays on wednesday, but i'm starting to think i won't be able to fix it before then
Did you have any resolution to this problem. I am currently sitting in the exact same boat. Did the factory reset, pass code screen still there, I didn't set a pass code. Basically hands tied, can't update firmware, guessing i'll have to get a new phone, but hoping maybe you found a miracle cure! ha! - Thanks for any guidance. - Arden (Seattle, WA)
Just flash another rom (stock/original) and start over.
How have you done that?
Can you help please?
I tried factory reset (volume plus+ power button), hard reset (volume- plus power button), update, and nothing works; I also went to two different specialized stores and they failed to find a way to reinstall the original Android version or a recent one.
Comparing the files with the factory version installed in the phone, the phone report identified three changes:
- a new file: /system/priv-app/7mK0T6e8Z5.apk
- the lost of a file: /system/app/com.android.fallen.apk
- and a modified file: /system/bin/debuggerd
AzulFogo said:
How have you done that?
Can you help please?
Click to expand...
Click to collapse
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Dior DNA said:
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Click to expand...
Click to collapse
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
latest sp flash tools is 5.1532
search needrom with "5.1532" will leed you to the download page
no link allowed here, so ...
for beta 10 from jiyau.de, search google with "jiyau.de Lollipop 5.1.1 - Beta 10 (14.10.2015)".
it will leeds you to the rom.
Good hunting
tuto sp flash tool
https://youtu.be/ztI8sc8MUNo
AzulFogo said:
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
Click to expand...
Click to collapse
see jaunedoeuf's answers
I would like to add: if you come from KK and go to LP, you must use firmware upgrade to update/adjust internal SD partition layout. Good Luck! if you succeed, and are happy with firmware, consider voting @ http://forum.xda-developers.com/android/general/firmware-jiayu-s3-t3212184 (almost 100 votes)
First, thank you for your great help!
With your suggestions, I managed to install Lolipop in my Jiayu S3S (upgraded from Kit Kat) - Xtreme ROM TF (JiayuS3-5.1Extreme1.1SP.zip).
However the problem remain... the phone still is asking for a PIN (that I never had put there, in first place)...
What should I do now?
you could try factory reset and are you sure its the phone asking for pin and not the sim card
Hello everyone, I'd like to start off by saying I am a complete newcomer to all this so please explain literally all of the terminology/jargon you intend to use and correct me when I use it wrong.
I have a Chinese version of the Samsung Galaxy Note 4 SM-N9109W and up until yesterday it was running out of the box on android 4.4.4. I care not for any of the data on the phone nor the warranty as there was none to begin with when it was gifted to me.
I attempted to "root" it as I didn't want any of the Chinese apps/restrictions on it but have failed miserably and now my phone is stuck in a bootloop.
I was following this guide if it helps: http://forum.xda-developers.com/note-4/general/root-note-4-sm-n910c-t2977948 and downloaded the appropriate Snapdragon version (SM-N9109W).
I cannot enter recovery mode by holding down *power+vol up+home* as it just keeps on rebooting. I can, however, get into the downloader by holding down *power+vol down+home*.
I have tried for the entirety of today to find a specific guide for the Chinese note 4 on xda, youtube and google but to no avail - nothing that I can find is identical to my situation and I am hesitant to do anything further to it by following a similar guide in case I make it worse.
I have repeatedly seen suggestions to "flash" stock rom and as I can get into the downloader I believe this would be a great starting point, but once again I am afraid to do anything without a specific guide for the N9109W.
A few people have referred to SamMobile to download stock rom, but a search for SM-N9109W lists 8 files for 4.4.4 and I believe I have no way of working out my PDA or CSC, yet again I don't know what these even are and they might not be relevant?
Any assistance in getting my phone's software back to "out of the box" conditions would be GREATLY appreciated.
Thank you for your time and patience,
Ryan
If you can enter Download mode then you can flash that firmware you found matching your device's exact model no. via Odin. Just put the ROM in AP/PDA tab (PDA for older Odin versions, AP for new) and hit start.
ithehappy said:
If you can enter Download mode then you can flash that firmware you found matching your device's exact model no. via Odin. Just put the ROM in AP/PDA tab (PDA for older Odin versions, AP for new) and hit start.
Click to expand...
Click to collapse
Thank you ithehappy for the reply,
When I search for the stock firmware on SamMobile, I type in my exact model number (SM-N9109W). This search returns with a list of multiple different versions for my phone, of which 8 are 4.4.4 (my initial version).
Does it matter which version I download and install?
To my knowledge, I have no way of finding my CSC or PDA unless you know of a database I can use to search the information that is physically on my phone? Once again, does it matter that I know what these are or can I simply download, for example, version 5.1.1 and flash that on instead of my original 4.4.4? Or, will this just cause further possibly unfixable problems?
Thank you for your help
Anyone?
No, you can download any one you want.
Thank you for the help, ithehappy. I now have a working phone!
For future readers, I downloaded the latest version of 4.4.4 that SamMobile had (2015-03-27) for my model (SM-N9109W):
PDA: N9109WKEU1ANL3
CSC: N9109WCTC1ANL3
It failed the first time I tried flashing with Odin 3.10.7, but whilst I was hastily taking screenshots of my problem to post here I accidentally started the transfer again and it successfully installed that time.
I followed the instructions on SamMobile for the installation.
This version of the firmware I installed does not have any google services (thank China for that), so keep that in mind.
Thank you
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
bkenobi69 said:
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Try to dial *#0808# in the stock phone application.
You should see a menu with several options.
Select "MTP+ADB" under USB settings and press "OK".
Then you'll be able to connect your phone via MTP or ADB to your PC.
If there's no menu, then (assuming you're rooted) open a good file browser (ES, Root Explorer or something) and open the file /efs/carrier/HiddenMenu (it's a simple text file) and replace OFF with ON there.
Save the changes and reboot the phone.
Now the menu should be operational.
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
bkenobi69 said:
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
Click to expand...
Click to collapse
Currently root is impossible for MM on G900V CID11.
Impossible means you cannot gain it now, most likely it's forever.
There's no internet site which can help.
You must choose: root on LP or unrooted MM.
You must decide if you want a stock ROM or something (TW-based) else too.
It's a good idea to flash and use a stock firmware for the time while you're thinking.
Interesting... I guess I must have been reading things wrong because I thought I could go to MM with root. I'll try going to Lollipop then but first I'm going to just flash back to JB 4.4.4.
I downloaded 4.4.4 from Samsung and was going to write it with Odin, but it says FAIL when I try to flash. I suspect I just tripped Knox...
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I'll look around to find a guide, but if you have a suggestion, I'd certainly listen!
bkenobi69 said:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means that you've upgraded your phone's firmware while experimenting.
Now you cannot directly flash 4.4.4 with Odin, you're limited to 5.0 (BOK3) and above.
Ok. I'll read the guides on the head of this list and see if I can find the right information.
FWIW, I was following the same how-to that most of the stickies point to and say is safe. I wonder how I got to a position that I'm in now when I did the same as recommended. Painiac's thread points to the same thing I did:
https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I think I may have tried to flash a MM stock rom though when it got into a boot loop. I suspect that would be the issue.
Bootloop is not a problem in this case.
Just reboot to the recovery and perform a factory reset from there.
The phone will boot but the first boot will take 10-15 min.
bkenobi69 said:
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Marshmallow can not be rooted on CID 11 devices. The Samsung drivers are found here: https://www.samsung.com/us/support/owners/product/galaxy-s5-verizon You can follow the 5.0 root guide here: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529 to downgrade to 5.0. If you want to downgrade past that to a version lower than 5.0, you will still have to follow that guide then follow the instructions here (I recommend you to follow the root guide for 5.0 above then skip steps 1 and 2 on this page): https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858 . You can find stock firmwares here: https://forum.xda-developers.com/showthread.php?t=2784880 (stock firmware, kernel, and modem files) and if you get bootlooped or bricked, just reflash the combination file from the root guide. If you want to root 4.4.4, follow the downgrade method using all of the NK2 files but the flash the NGC kernel, run through the setup, then use towelroot and flash the NK2 kernel after that. If you ever get stuck on the red Verizon screen, just pop the battery out and reboot.
That's about all anyone can do and a run down of everything.
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
bkenobi69 said:
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
Click to expand...
Click to collapse
Understandable, I can't believe it is 2018 and we still haven't invented a way to compress 1.7GB into 1.7MB archives to make life easy on low connections. How is battery life on 4.4.4 and which update of 4.4.4 are you on? I've been having an issue with my phone dropping a percent every 2 minutes on 5.0/6.0. It would be nice find a version to root along with excellent battery life.
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Ok, I tethered to my wife's phone and am burning her data (shhhh, don't tell her).
I grabbed all of the OC4 files, the PB1 rom, and lolliroot. I think I have everything I need so long as OC4 is a good place to end up.
bkenobi69 said:
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Click to expand...
Click to collapse
Here are some files (that I been hunting for about an hour for). Just gonna reference this for future use and anyone who comes across this thread. http://rootjunkysdl.com/files/?dir=Galaxy S5
Nice find!
I have the phone up and running on stock PB1 currently. I'm going to let it sit to see what the battery is like prior to rooting. While I haven't gotten it hooked back up to my account yet nor do I have it rooted, I feel pretty confident now that I'm on the right track. Thanks!
Just to finish out this topic, I have not successfully completed attaining root on 5.0. I flashed PB1 to the phone and then followed this guide for installing KingRoot:
https://androidforums.com/threads/root-question.1120150/
I got the lolliroot files from here:
https://www.androidfilehost.com/?fid=312968873555011514
Thanks to all who offered help!
Qyuck question... I've got my phone working well bow, but there's one issue with apps I'm not sure how to address. I want to use Verizon Visual Voicemail but I can't find it on the Play store. I disabled updates so I wouldn't get the marshmallow update and break root. but, with updates turned off, VVM won't get pushed. Any suggestions?
Okay so I did some research and I see there is a new FRP bypass or removal tool/method.
Get odin
DL Combination Files
DL Stock firmware
Upload the combination file then do some stuff on phone
Then do the FRP removal with the CMD Prompt
then load the stock firmware...and the phone should be good as new....
Now my question/problem is I cannot seem to find my specific combination file which is [g950usqs5crh1]
I looked everywhere for COMBINATION_FA70_G950USQS5CRH1.tar.md5 but I could not find it...
i tried using COMBINATION_FA70_G950USQU4ARE1_CL13344735_QB18248859_REV00_user_mid_noship_MULTI_CERT.tar.md5
but odin gave me a fail...i cannnot find any site or google search with the specific G950USQS5CRH1 all I see is U4s and U3s and even U5
is this a new firmware that cannot be bypassed???
anyway to fix this or downgrade to the u4 firmware??? I am lost.
TIA
My wife's camera stopped working on her phone. I read flashing back to a previous firmware might fix the issue. I thought it was worth a try (and easier) before physically cracking the phone open and examining the hardware. But boy was I sure wrong about that!
I've read so much crap about this within the past few hours my head could explode. But I think the problem is trying to source the correct firmware.
This is a SM-G935V with a snapdragon processor in it according to spec websites.
The baseband version is: G935VVRSBCTC1
I haven't figured out how to find the current PDA version on the phone yet, but when I was trying to flash it with random firmware with Odin, the phone screen gave me error message: Fused 11 > Binary 4
From what I read, I understand that to mean I'm trying to flash binary 4 over 11 and that won't work. The flash only works if the number is greater....or I'm hoping maybe it will work if the number is the same. I would be happy just to flash Android 8.0 at this point in any form just to see if the camera starts working again. I've already tried a factory reset, clearing camera app data and cache, booting into safe mode, and resetting phone settings to fix the camera - nothing worked.
Could anybody please help me figure out my current PDA version on the phone? Or help me source the correct firmware? I'm starting to think it might be easier just to root the phone and install that ONE UI with android 9 or the Lineage OS with Android 10. But I've never rooted a phone before, this is my first attempt at any of this and to be honest this phone is not giving me the confidence I need to attempt the root and new OS. I can't even get the current firmware to reinstall.
Any help would be very appreciated. Like I said, I've stayed up all night and I'm so freaking tired at this point. But I feel like I'm soooooo close.
I have an SD card with Magisk, no-verity-opt-encrypt, and twrp ready to go. I have Odin ready and installed Samsung USB. Do you guys think I should just try another firmware and root the phone? Any links to firmware that don't take 12 hours to download would be appreciated.
UPDATE!
I found the PDA version with that handy "Phone Info *Samsung*" app in the play store.
The PDA version is G935VVRSBCTC1 5TH DIGIT FROM THE RIGHT GIVES US THE FUSED BINARY "B". I guess when they got past the number 9 the switched to Alpha characters. I found some "A" firmwares on Updato.com. But I didn't see any with a "B". So there's a good chance the one's I'm trying to download over 12 hours right now won't work.
I also scrolled over to the "Hardware" section in the phone and it asked for access to the Camera. I gave it access. But now the field is blank/empty. I didn't populate any info on the Camera. I don't know if that means anything just wanted to point that out. Could still be firmware or hardware as far as I know.
Thanks, Derek
MajinMight said:
My wife's camera stopped working on her phone. I read flashing back to a previous firmware might fix the issue. I thought it was worth a try (and easier) before physically cracking the phone open and examining the hardware. But boy was I sure wrong about that!
I've read so much crap about this within the past few hours my head could explode. But I think the problem is trying to source the correct firmware.
This is a SM-G935V with a snapdragon processor in it according to spec websites.
The baseband version is: G935VVRSBCTC1
I haven't figured out how to find the current PDA version on the phone yet, but when I was trying to flash it with random firmware with Odin, the phone screen gave me error message: Fused 11 > Binary 4
From what I read, I understand that to mean I'm trying to flash binary 4 over 11 and that won't work. The flash only works if the number is greater....or I'm hoping maybe it will work if the number is the same. I would be happy just to flash Android 8.0 at this point in any form just to see if the camera starts working again. I've already tried a factory reset, clearing camera app data and cache, booting into safe mode, and resetting phone settings to fix the camera - nothing worked.
Could anybody please help me figure out my current PDA version on the phone? Or help me source the correct firmware? I'm starting to think it might be easier just to root the phone and install that ONE UI with android 9 or the Lineage OS with Android 10. But I've never rooted a phone before, this is my first attempt at any of this and to be honest this phone is not giving me the confidence I need to attempt the root and new OS. I can't even get the current firmware to reinstall.
Any help would be very appreciated. Like I said, I've stayed up all night and I'm so freaking tired at this point. But I feel like I'm soooooo close.
I have an SD card with Magisk, no-verity-opt-encrypt, and twrp ready to go. I have Odin ready and installed Samsung USB. Do you guys think I should just try another firmware and root the phone? Any links to firmware that don't take 12 hours to download would be appreciated.
Click to expand...
Click to collapse
UPDATE #2
As you can tell I haven't given up yet. I found my current firmware version for download on a different website:
https://samfrew.com/download/Galaxy__S7__edge__/b3kj/VZW/G935VVRSBCTC1/G935VVZWBCTC1/"]https://samfrew.com/download/Galaxy__S7__edge__/b3kj/VZW/G935VVRSBCTC1/G935VVZWBCTC1/
It's another slow download option which really sucks. But I'll be able to test If I can flash the same firmware to the phone (not technically a downgrade and carries the same fused binary). So we shall see. If this doesn't work I'll be looking into the other android 9 or 10 roms and rooting the phone.
Thanks, Derek
MajinMight said:
I found the PDA version with that handy "Phone Info *Samsung*" app in the play store.
The PDA version is G935VVRSBCTC1 5TH DIGIT FROM THE RIGHT GIVES US THE FUSED BINARY "B". I guess when they got past the number 9 the switched to Alpha characters. I found some "A" firmwares on Updato.com. But I didn't see any with a "B". So there's a good chance the one's I'm trying to download over 12 hours right now won't work.
I also scrolled over to the "Hardware" section in the phone and it asked for access to the Camera. I gave it access. But now the field is blank/empty. I didn't populate any info on the Camera. I don't know if that means anything just wanted to point that out. Could still be firmware or hardware as far as I know.
Thanks, Derek
Click to expand...
Click to collapse
TL/DR your full posts but I will cut to the chase on some points. If your phone is SM-G935V (US-Verizon) then you:
1) can NOT root binary B firmware. Binary A (10) yes, B (11) no, at least not until the ENG file becomes available- IF it ever comes. Official S7 support is next to dead.
2) even if you were lucky flashing binary A firmware and successfully rooted, you still would NOT be able to flash ANY custom ROM's such as Lineage. Also, Magisk is useless and will not work on our phones either.
US-spec Snapdragon phones are bootloader locked. There is no workaround. Locked bootloaders prevent flashing custom ROM's, kernels, etc. We are lucky we have root access and it took years just to get that. Bootloader unlocking will never happen for US-spec S7. Much as I love my S7e, if I ever have to replace it I will never get another US "Crapdragon" that you can't do anything with.
I do not know what the issue is with your camera. Maybe other forum members will have ideas. I do wish you luck getting everything back to normal.
Dang! Well thanks for the info! I guess all the videos I've seen with S7's and custom roms have not been done on the US-Verizon phone. What a bummer. Well this was a major learning experience at least.
My only idea now is to crack her open and make sure the camera didn't come unplugged from a drop. I also seen camera replacements were really cheap online. I don't know if it's worth my time....we are due for a phone upgrade anyway.
SkylineDriver said:
TL/DR your full posts but I will cut to the chase on some points. If your phone is SM-G935V (US-Verizon) then you:
1) can NOT root binary B firmware. Binary A (10) yes, B (11) no, at least not until the ENG file becomes available- IF it ever comes. Official S7 support is next to dead.
2) even if you were lucky flashing binary A firmware and successfully rooted, you still would NOT be able to flash ANY custom ROM's such as Lineage. Also, Magisk is useless and will not work on our phones either.
US-spec Snapdragon phones are bootloader locked. There is no workaround. Locked bootloaders prevent flashing custom ROM's, kernels, etc. We are lucky we have root access and it took years just to get that. Bootloader unlocking will never happen for US-spec S7. Much as I love my S7e, if I ever have to replace it I will never get another US "Crapdragon" that you can't do anything with.
I do not know what the issue is with your camera. Maybe other forum members will have ideas. I do wish you luck getting everything back to normal.
Click to expand...
Click to collapse