I have a zte axon 7 A2017 china version, when the phone is locked it shows the zte logo then the red led flashes and goes off.
twrp does not work, edl mode is recognized by Miflash but does not flash with any stock rom.
"cannot recive hello packet, MiFlash is traying to reset status"
matices said:
I have a zte axon 7 A2017 china version, when the phone is locked it shows the zte logo then the red led flashes and goes off.
twrp does not work, edl mode is recognized by Miflash but does not flash with any stock rom.
"cannot recive hello packet, MiFlash is traying to reset status"
Click to expand...
Click to collapse
You can use the DFU multitool from here...
https://forum.xda-developers.com/axon-7/how-to/salesmultidla2017-tool-to-unblick-dfu-t3854229
There is an English version on page 4
Or check all your driver's are up to date correct your PC or laptop show show as...
Qualcomm HS-USB QDLoader 9008 in the windows device manager.
If it shows DFU, use the tool in the above link.
Hope this helps
Syberclone said:
You can use the DFU multitool from here...
https://forum.xda-developers.com/axon-7/how-to/salesmultidla2017-tool-to-unblick-dfu-t3854229
There is an English version on page 4
Or check all your driver's are up to date correct your PC or laptop show show as...
Qualcomm HS-USB QDLoader 9008 in the windows device manager.
If it shows DFU, use the tool in the above link.
Hope this helps
Click to expand...
Click to collapse
thank you.
Can somebody give me full QCN Backup from axon 7 (a2017g), please?
matices said:
thank you.
Can somebody give me full QCN Backup from axon 7 (a2017g), please?
Click to expand...
Click to collapse
You are welcome.
You need a Edl package to finish the process using Miflash, there are some posted on here depending if you want Nougat or Oreo.
What did you do? i see many many bricks,because they follow steps mentioned by others (that are wrong)
For example they say,if you want to go back to stock you can connect to edl and just flash stock,but that is bullcrap
Ive never had a problem restoring via Edl, its been the packages that can cause problem.
I've always gone forwards with my ROMs never backwards.
Some Edls fail the hello packet (eg: the turdevs package I was using failed)
The Edl packages by Djkuz have all worked.
Predatorhaze said:
What did you do? i see many many bricks,because they follow steps mentioned by others (that are wrong)
For example they say,if you want to go back to stock you can connect to edl and just flash stock,but that is bullcrap
Click to expand...
Click to collapse
it's not lmao
keep misleading people though... no problem. only newbies will believe the misinformed crap that you post
Syberclone said:
You are welcome.
You need a Edl package to finish the process using Miflash, there are some posted on here depending if you want Nougat or Oreo.
Click to expand...
Click to collapse
Resolved thanks
Now I need to release the 4g in my zte axon 7 chinese. only 3g works
Can you give me a full backup of QCN from axon 7 A2017G or A2017U, please? or someone who has
matices said:
Resolved thanks
Now I need to release the 4g in my zte axon 7 chinese. only 3g works
Can you give me a full backup of QCN from axon 7 A2017G or A2017U, please? or someone who has
Click to expand...
Click to collapse
You can't flash hardware...
If you flash a different modem (which you totally can without even qcn) you'll just lose signal. Flashing a QCN backup would probably wipe your IMEI
Choose an username... said:
You can't flash hardware...
If you flash a different modem (which you totally can without even qcn) you'll just lose signal. Flashing a QCN backup would probably wipe your IMEI
Click to expand...
Click to collapse
I have the backup of my qcn phone.
I have already tried different QCN from other brands, but none of them works, I need to get the qcn zte axon 7 a2017g or a2017u to try.
The imei I have it annotated to restore at any time.
matices said:
I have the backup of my qcn phone.
I have already tried different QCN from other brands, but none of them works, I need to get the qcn zte axon 7 a2017g or a2017u to try.
The imei I have it annotated to restore at any time.
Click to expand...
Click to collapse
keep trying if you want, but it's surely that you're lacking the necessary bands. did you even check before?
Also, "different QCN from other brands"? What other brands???
There are a number of reasons why you can't get 4g, SIM card is one, band support is another.
I had to change a SIM because it was only running 3g not 4g, I wouldn't keep trying other backups in case you break your phone completely.
Choose an username... said:
keep trying if you want, but it's surely that you're lacking the necessary bands. did you even check before?
Also, "different QCN from other brands"? What other brands???
Click to expand...
Click to collapse
Xiomi, One PLus,etc
But maybe if I work with the qcn of the same model ZTE AXON 7 will work
Syberclone said:
There are a number of reasons why you can't get 4g, SIM card is one, band support is another.
I had to change a SIM because it was only running 3g not 4g, I wouldn't keep trying other backups in case you break your phone completely.
Click to expand...
Click to collapse
I'm inside the 4g coverage, the chip is 4g, I've tried it on another smartphone and if it captures 4g, the problem is the band
My axon is Chinese, it only has FDD LTE band 1,3,7
through DFS tool I have activated band 8 because it is what I need but the phone does not recognize it as LTE but as band 8 GSM and there is no signal, only 3G capture
It seems that it is impossible to activate the other bands in this zte axon 7 A2017
matices said:
My axon is Chinese, it only has FDD LTE band 1,3,7
through DFS tool I have activated band 8 because it is what I need but the phone does not recognize it as LTE but as band 8 GSM and there is no signal, only 3G capture
It seems that it is impossible to activate the other bands in this zte axon 7 A2017
Click to expand...
Click to collapse
Where are you living? Your phone just may not have the other bands in it. Nothing that can be fixed with a modem or qcn flash.
JTruj1ll0923 said:
Where are you living? Your phone just may not have the other bands in it. Nothing that can be fixed with a modem or qcn flash.
Click to expand...
Click to collapse
I tried using flash with qcn files with unlocked bands, but they were from xiaomi phones, one more, zte axon 7 mini, but it did not work for me.
How could I edit the QCN of my zte axon 7 to activate the bands?
There will be some way to edit a modem (NON-HLOS.bin). It would be excellent. Maybe it works for me.
i live in peru
matices said:
I tried using flash with qcn files with unlocked bands, but they were from xiaomi phones, one more, zte axon 7 mini, but it did not work for me.
How could I edit the QCN of my zte axon 7 to activate the bands?
There will be some way to edit a modem (NON-HLOS.bin). It would be excellent. Maybe it works for me.
i live in peru
Click to expand...
Click to collapse
Sorry, but you don't understand. The bands are hardware based, not software. The modem files will help the bands recognize the towers, but nothing will add extra hardware. I'm assuming you don't have Claro as your carrier? If you do have Claro I don't know why it doesn't work, but if you don't have Claro you should get an a2017u. For example:
A2017: https://www.frequencycheck.com/compatibility/Eaj5CJl/zte-axon-7-a2017-dual-sim-td-lte-64gb/peru
A2017U: https://www.frequencycheck.com/compatibility/ny4lsLX/zte-axon-7-a2017u-dual-sim-lte-a-64gb/peru
JTruj1ll0923 said:
Sorry, but you don't understand. The bands are hardware based, not software. The modem files will help the bands recognize the towers, but nothing will add extra hardware. I'm assuming you don't have Claro as your carrier? If you do have Claro I don't know why it doesn't work, but if you don't have Claro you should get an a2017u. For example:
A2017: https://www.frequencycheck.com/compatibility/Eaj5CJl/zte-axon-7-a2017-dual-sim-td-lte-64gb/peru
A2017U: https://www.frequencycheck.com/compatibility/ny4lsLX/zte-axon-7-a2017u-dual-sim-lte-a-64gb/peru
Click to expand...
Click to collapse
If in my case the blockade can be by hardware there is nothing I can do.
I understand the subject. I already tested with chips from several operators in my country, none of them recognizes 4g on my phone, even clear.
That's why I go to the experts of xda.
Bands LTE Perú :
Movistar : band 4 (1700/2100 MHz) Band 28 (700 MHz)
Claro : band 2 (1900 MHz) Band 28 (700 MHz)
Entel : band 4 (1700/2100 MHz) band 28 (700 MHz)
Bitel : band 8 (900 MHz) band 2 (1900 MHz)
matices said:
If in my case the blockade can be by hardware there is nothing I can do.
I understand the subject. I already tested with chips from several operators in my country, none of them recognizes 4g on my phone, even clear.
That's why I go to the experts of xda.
Bands LTE Perú :
Movistar : band 4 (1700/2100 MHz) Band 28 (700 MHz)
Claro : band 2 (1900 MHz) Band 28 (700 MHz)
Entel : band 4 (1700/2100 MHz) band 28 (700 MHz)
Bitel : band 8 (900 MHz) band 2 (1900 MHz)
Click to expand...
Click to collapse
Also, as is the case with some carriers in the United States, you may have the necessary bands but it may not be permitted on their network. They can choose which phones to allow and which to not allow.
Related
Got a xiaomi redmi note 4g LTE to play with but unfortunately device only supported FDD-LTE band 1, 3 only. Needed band 2, 4 and 7 to be able to work with tmobile USA LTE network. Any ideas on how to add those values to the phone?
blackysan said:
Got a xiaomi redmi note 4g LTE to play with but unfortunately device only supported FDD-LTE band 1, 3 only. Needed band 2, 4 and 7 to be able to work with tmobile USA LTE network. Any ideas on how to add those values to the phone?
Click to expand...
Click to collapse
No you cannot unlock bands. Bands are hardware based.
marbss said:
No you cannot unlock bands. Bands are hardware based.
Click to expand...
Click to collapse
the hardware was supported. It's a Snapdragon 410 chipset with 4G LTE world mode. it's Xiaomi who didn't add those bands into the baseband modem. I read some XDA threads about unlocking all LTE bands for Qualcomm Snapdragon chips but I couldn't understand how to add thoae NV values and how to get into the USB settings mode in my Xiaomi device. I need someone with experience to look into this and maybe make some step by steo guide for us. Its been done b4 with oneplusone, oppo, Sony, LG, Samsung phones with success so I knew it could be done.
ok i could be wrong. My friend just brought a moto x to australia and used a process or update to open up some more bands on his phone .
similar to this discussion http://forum.xda-developers.com/showpost.php?p=58064666&postcount=16 ???
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
jagbir89 said:
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
Click to expand...
Click to collapse
The ROM actually unlocks more LTE bands?
jagbir89 said:
Install mokee opensource
Sent from my HM NOTE 1LTEW using XDA Free mobile app
Click to expand...
Click to collapse
I'm having the same issue. Is this a solution?
gqkevyn said:
The ROM actually unlocks more LTE bands?
Click to expand...
Click to collapse
Don't know if you're still wondering, I found out there are two versions of this phone. One is Chinese the other is a Hong Kong version. The Hong Kong version comes out of the box with compatible T-Mobile 4g lte band.
Sent from my Nexus 6
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
gqkevyn said:
The ROM actually unlocks more LTE bands?
Click to expand...
Click to collapse
Oh, and as for ROMs unlocking lte bands. I would try the MIUI 5 global ROM. I haven't had a chance to test myself yet but, I would give it a shot. It's the ROM the Hong Kong version comes with out of the box.
Sent from my Nexus 6
Homer J. Fong said:
Don't know if you're still wondering, I found out there are two versions of this phone. One is Chinese the other is a Hong Kong version. The Hong Kong version comes out of the box with compatible T-Mobile 4g lte band.
Sent from my Nexus 6
---------- Post added at 12:55 AM ---------- Previous post was at 12:47 AM ----------
Oh, and as for ROMs unlocking lte bands. I would try the MIUI 5 global ROM. I haven't had a chance to test myself yet but, I would give it a shot. It's the ROM the Hong Kong version comes with out of the box.
Sent from my Nexus 6
Click to expand...
Click to collapse
how about TDD LTE version? with 2600mhz...i wondering can use it in my country...there's 2 version about our phone,FDD lte and TDD LTE...FDD LTE 1800/2100mhz...and i got TDD version...
Mayoz said:
how about TDD LTE version? with 2600mhz...i wondering can use it in my country...there's 2 version about our phone,FDD lte and TDD LTE...FDD LTE 1800/2100mhz...and i got TDD version...
Click to expand...
Click to collapse
I'm sorry, I'm not too familiar with lte bands outside of the US. However you should check out this forum for the Redmi Note 4g. It's where I got most of my info from.
http://en.miui.com/forum.php?mod=forumdisplay&fid=66&mobile=2
Sent from my Nexus 6
Can I unlock bands with Mokee?
Meerk4t said:
Can I unlock bands with Mokee?
Click to expand...
Click to collapse
I'm still not sure it's possible. I've searched and most people say it's hardware based and ROMs can't change it. If you're already rooted and have custom recovery, you might as well give it a shot and report back.
Sent from my Nexus 6
Same problem here. My carrier uses a LTE frequency not supported by phone. All other carriers are supported, mine is not, frustrating. Installing Mokee (or any other custom ROM, I tried them all) doesn't change a thing. I don't know about MIUI, but don't think it would work.
blackysan said:
the hardware was supported. It's a Snapdragon 410 chipset with 4G LTE world mode. it's Xiaomi who didn't add those bands into the baseband modem. I read some XDA threads about unlocking all LTE bands for Qualcomm Snapdragon chips but I couldn't understand how to add thoae NV values and how to get into the USB settings mode in my Xiaomi device. I need someone with experience to look into this and maybe make some step by steo guide for us. Its been done b4 with oneplusone, oppo, Sony, LG, Samsung phones with success so I knew it could be done.
Click to expand...
Click to collapse
How is it going now? Have you successfully unlocked B7
I want to unlock B20 and went through all the steps from this guide but no luck
But I did LOCKED B7 which is available originally on my Mi NOTE (dual-sim) to see if the value I set into 6828 is working.
you can have a go to unlock B7 I think
GeorgeZZzz said:
How is it going now? Have you successfully unlock B7
I want to unlock B20 and went through all the steps from this guide but no luck
But I did LOCKED B7 which si available originally on my Mi NOTE (dual-sim) to see if the value I set in to 6828 is working.
you can have a go to unlock B7 I think
Click to expand...
Click to collapse
i need more step by step info, with pictures if can, to show me how u did it please. thx in advance......
blackysan said:
i need more step by step info, with pictures if can, to show me how u did it please. thx in advance......
Click to expand...
Click to collapse
I posted a new thread here
Instruction DIAG mode for Redmi note 4g
4pda.ru/forum/index.php?showtopic=611491&st=4620
Hey Guys, unfortunately
this is my first US phone i have bought, and guess what it is not compatible with my carrier LTE :/
so the people have managed to get support of the B3 & B20 bands in which the most used bands on the motot nexus 6 and lg nexcus 5....
i have tried & tried to reach out a way to connect to the QPST / QXDM
but i don't have the Diag driver or the engeneering driver
yet the radio firmware...
now since @papi92 have ben able to get band 12 and flash it to the nexus
he maybe able to help us/me with this issue!
Hello everyone! I recently got a second-hand verizon G2 VS980. I live in India (location is relevant in my case because of this being a US only model). I had ROOT pre-installed and it stays even after factory reset. This indicates that it is NOT stock.
This phone has legit hardware, as in it has all VS980 components. I have checked it. BUT IT HAS THE IMEI OF A D800. Does this mean that i also have the bands of D800 enabled?
Now what i want to do is,
Above all i want this phone rooted and flashed to the latest and most stable ROM atm.
Second, i would like to use 4G LTE on it, here in India. I know that VS980 supports only band 4 and 13. I NEED band 3,5,40. I have trawled the internet for this specific info but to no avail. Does the VS980 has the hardware it takes to use other 4G bands? Or is it manufactured only with band 4 and 13 in mind? The only pieces of little info i came upon was this
jacob019 said:
After spending a few days hacking around with the VS980 (LG G2 Verizon Model) I wish to share some findings.
1. NV edits to the bands will only work with baseband 11A or earlier. All later radios have the NV values hardcoded into the baseband and any changes will be reverted. You can successfully edit the NV values, and they will survive reboot on baseband 11A, but as soon as you install a later baseband they will revert to stock. CM11 works well with 11A. Perhaps binary modification to later basebands would be possible.
2. LTE Band 17 does not appear to be supported by the hardware. I copied all the values from a D801. Android now reports my phone as a GSM model instead of CDMA which is nice, but it just won't connect to LTE Band 17. If I delete band 4, I can't get LTE at all, so I know the settings are having an effect.
Click to expand...
Click to collapse
and this. So i am confused where to start, i currently have a 26A baseband. Is it possible to enable band 3,5 and 40 on VS980?
I found the guides much confusing and complex relative to other devices i had. I am confused what to do first.
Should i flash TWRP first? or
Should i flash stock firmware?
I see that bands can be edited only on baseband 11A or earlier, so should i downgrade to that etc.
I have the phantom touches, and i read that they were gone after a specific update, so can i still get/flash that update with
a 11A baseband?
I do not understand this baseband, bootloader, exploits, and ROM compatiblity things.
I am willing to try even low level edits if someone is able to help and guide me.
Lastly, i just want my VS980 to run a good stable ROM with (if possible) 4G LTE on band 3,5 and/or 20 (India) and NO phantom touches update.
Specs: attached
Bump. Noone?
Can't anyone tell me that does the verizon model even includes hardware capability for 4G band 3,5 and 20? If this gets cleared, more than HALF of my problems will be gone.
ankitkashyap said:
Bump. Noone?
Can't anyone tell me that does the verizon model even includes hardware capability for 4G band 3,5 and 20? If this gets cleared, more than HALF of my problems will be gone.
Click to expand...
Click to collapse
vs980 uses lte band 4 and 13. lte wont work for any other bands unfortunately
theobserver76 said:
vs980 uses lte band 4 and 13. lte wont work for any other bands unfortunately
Click to expand...
Click to collapse
This means that i can't enable/use other bands because the hardware does not exist for any band except 4 and 13. Yes?
ankitkashyap said:
This means that i can't enable/use other bands because the hardware does not exist for any band except 4 and 13. Yes?
Click to expand...
Click to collapse
yep
Thanks for clearing this out.
Had anyone who doesnt have the Global Version tried to change the LTE Band with the Snapdragon software tools? If you haven't heard or tried this just search Unlock LTE Bands in XDA main search. Because I'm think its going to be much cheaper to by the Chinese version that is like only 343USD for 6gb of RAM and 128 ROM and unlock the bands. Any thoughts? Thanks.
Changing the bands with QPST or QXDM can be done but it has no effect on functionality.
Some software will see these bands as unlocked but the phone itself can not make use of them. You might also run into some trouble on MIUI though custom roms seem more flexible with this.
At the moment there is no way to convert a CN (band restricted) model into a Global model (no band restrictions).
Hi, somebody has any news ?
for conversion(activate ) band 20 in Xiaomi Note 2 ?
thank you
This is very important topic I think. What I find really weird that the firmware files (modem) and rom are the same no matter which version you have...
On redmi note 3, kate and kenzo have different rom and different modem files. Its really weird here.
Hi there. I bought an 'unlocked' AT&T H910 LGV20 from ebay.
I thought would work in the UK as the phone hardware has compatible 4g bands that my provider (EE) uses.
The stock at&t firmware only allowed me to use 2g/Edge.
So I have flashed several other roms / kdz files using LGUP
( h910 Puerto Rico, H915 Canada, US996 unlocked US - variety of android 7 and android 8)
Some roms (particularly Android 7.0 Canada and Puerto Rico) work with 2g and 3g but there isn't even a 4G option in the base menus.
Some roms have global or allow you to select LTE/3Gpp but they don't allow me to get a 4g signal.
One even said 4g at the top but when I checked the connection in phone settings - about - it showed 3g (and this was consistent with the download speed too)
II only got videotron Canada to work. Bell and Rogers should have an overlapping 4g band but I got the CUST error on those roms.
I have tried going through service menu but all that can do is sometimes force a 3g signal from 2g
So what should I do?
1. I s there a rom with overlapping 4g bands that would work? Can I flash a HK rom onto H910?
2. Can I root the phone to unlock 4g bands?
Would this survive unrooting to allow me to access microsoft intune (for work email), banking and sports apps (which sometimes don't like root?)?
3. Would a custom rom work? Which do you recommend to keep as many features as possible eg remote control, camera, DAC?
Do they also work with microsoft intune, banking apps, sports apps etc?
I have followed a few of the posts out there but given the ebay seller I wonder if a few more people in Europe might have been tempted!
Thanks!
Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.
Stransky said:
Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.
Click to expand...
Click to collapse
Thank you!
I was led to believe the H910 (same as H915 in Canada) supported all of EE's 4g bands.
But for sure, the carriers seem to have locked some out. But not having any luck with other roms either...
I cannot post the url but
frequencycheck . com
carrier-compatibility/wwW4hXP/lg-h910-v20-lte-a-h915/ee-everything-everywhere-united-kingdom
Compatibility - 3 out of 3 bands supported
100%
Interface Name Supported by device?
LTE B3 (1800 +) Yes
LTE B7 (2600) Yes
LTE B20 (800 DD) Yes
As I said in previous post the H910 does not support Band 20 (800) check GSM Arena site select LG V20 and then H910 and select LTE bands and you will see that Band 20 is missing. The H915 is not listed.
Sent from my iPad using Tapatalk
@jamescarrick
I have a similar issue, having bought an "unlocked" H910 and having only 2G. Is this the file name of the H915 kdz file you flashed to enable 3G: "H91510e_00_VTR_CA_OP_1205.kdz"?
Thanks.